Wanted: screen touch compatabiity

I think to buy a HP envy touchscreen 17 inch running win 8.1 (I need a new laptop computer) I plan on upgrading to windows 10.  I was wondering if anyone knew if the touch screen of a windows 8.1 would be able to use all the new features in windows 10 or should I wait for windows 10 come out to get a new computer. I know that the touch screen and the computer is compatible with 10 but I wanted to make sure that I would get the full range of options, gestures etc. with 10 windows if I bought an 8.1.   Thank you

Hi @LH7,

Thank you for your inquiry.

I understand that you're considering a desire, but would like to kmow on the update to Windows 10 and if the touch feature would continue to operate.

As you said it has not officially been released yet and so drivers are still being developed.

I can tell you that we have an AIO computer with a touchscreen running Windows 10 and the touch screen feature works very well.

If you choose to update and you have too many difficulties, that you do not have the option to return to Windows 8.1.

Here is a link to Windows 10 onwhich can help to answer the questions.

I hope this has helped!

Tags: Notebooks

Similar Questions

  • can I use the screen touch iq526 as a monitor to another computer? If so, how to enter the video?

    can I use the screen touch iq526 as a monitor to another computer? If so, how to enter the video?

    You know, it's just a thought.  I'm not sure that the differences between the iq526 and iq770, but as I was looking around I found this article.  I don't know if it'll help, but you might want to take a look.  Obviously someone understood how to use the HP touchsmart as an external monitor for his Dell laptop.

  • TouchSmart pilot: screen touch need DRIVER TouchSmart PC HP TouchSmart 520-1018 compatible with 64-bit Windows 8.1

    Hello and Hello

    I have a PC while HP is since I install my touchscreen 8.1 Windows does not
    and I can't find the driver touchsmart

    It is for this reason that I appealed to you to help me because I'm not even the only this brand PC with this PROBLEM AND the TACTILE SCREEN and television

    Screen touch need DRIVER TouchSmart PC HP TouchSmart 520-1018 en all-in-one, compatible with 64-bit Windows 8.1

    Here's the Ref: my PC HELP Please help me

    Driver name * * USB hardware TouchscreenIdentifiant-VID_1926 & PID_0DBE and REV_0008 & MI_00
    HP TouchSmart 520-1018 en desktop, all-in-one, serial number: CZC2100L4G
    Model: H0N17EA
     
    Hewlett Packard Max resolution: screen size 1920 x 1080: 23.1 "(51 cm x 29 cm) Production date: 31/12/2001 Aspect ratio: input type 16: 9 video: digital signal DisplayPort"

    is its lack and I can't find the download I search the Web without result.
    HP Forum, Microsoft forum, Forum Intel people can help me it's incredible that my PC this compatibility issue with 64-bit Windows 8.1 is said to go arriera on Windows 7, I have to buy Windows 8.1 for 119 Euros at Radio Shack, and the seller told me it was compatible with my pc Touchsmart 520-1018 fr.
    What a rip off we are selling a PC, software that is not compatible and is capable of people is the manufacturer explained why or how? and help.
     
    Thank you for help or the answer

    sincerely

    ***********************************************************************************************************

    Hello

    I United Nations PC all in one HP, is since I install Windows 8.1 my touch screen works like
    and I can't find the driver touchsmart

    It is for this reason that I appealed to pay you help me I'm like not even the only one that this brand of PC with this PROBLEM of with TOUCH SCREEN AND and TV

    Screen touch need DRIVER TouchSmart, PC HP TouchSmart 520-1018 all-in-one, compatible with Windows 8.1 en 64-bit

    Here's the ref: my PC HELP me please help

    Driver name * material TouchscreenIdentifiant * USB\VID_1926 & PID_0DBE & REV_0008 & MI_00
    Computer HP TouchSmart 520-1018 en desktop, all-in-one, serial number: CZC2100L4G
    Model: H0N17EA

    Manufacturer: Hewlett Packard maximum Resolution: 1920 x 1080 screen size: 23.1 "(51 cm x 29 cm) date of manufacture: 12/31/2001 of aspect Ratio: 16: 9 type of video input: signal digital DisplayPort"

    Its who miss me and I can't pour download I searching the Web without result.
    HP, Microsoft forum forum, Intel Forum people can help me this is like not even amazing that my Pc has this problem of compatibility with Windows 8.1 64-bit is told me to come back in arriéra on Windows 7 I buy Windows 8.1 pour 119 Euros at radio SHACK, and the seller my well said it was compatible with my pc Touchsmart 520-1018 fr.

    What ripoff on sells PCs and software which not compatible son and people is capable of this is company LABELTEX of music why or how do? and accomplice.

    Thank you for help or an answer

    CDL

    Hello

    > Shut down the computer and enter the Diagnostic screen

    > by pressing the F2 function key during startup

    > test the touch screen - if all of the boxes to pass the test problem solved

    > before going to this update of pease support HP support and udate it

    > so bad u get the opportunity to make a touchscreen test

    > issue trouble be solved: bravohelen

    Troubleshooting of touch screen in Windows 8

    Please click on "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.

    Click on the 'Congratulations, Thumbs Up' at the bottom right to say 'Thank you' for helping to!

  • Screens touch acer are compatible with the iPad?

    Screens touch acer are compatible with the iPad?  I am interested in making a purchase, but must make sure that there will be no problem to connect my iPad.

    Thanks for your efforts, but given that Acer was not able to provide me with a Yes or no answer, quick and simple, I decided to buy a dell instead.

  • Help, please. Screen touch dell inspiron 5559 HID-complaint does not work.

    Screen touch dell inspiron 5559 HID-complaint does not work. I have to keep this option disabled because all of a sudden he starts to feel the uncontrollable different key. Sometimes it works fine for a day, but it continues to be. I have restored the laptop to factory settings, but it did not work.  I checked the updates of drivers, but they are none.  Please help me with this. Thank you in advance.

    How do I calibrate my touch screen

    www.dell.com/.../EN

  • The customer wants widescreen touch "kiosk" for a trade show.

    Is it possible to create the app with ID/DPS and then use the new viewer of Windows on a PC running 8.1 with a screen touch 27 "attached to it?

    Honestly, no. People have tried in the past and just DPS is not designed to be a kiosk. You end up with all sorts of hacks to try to reset the content initially after inactivity, by preventing access to the basic UI in the app, etc.

    Neil

  • Help! Problem with my screen touch x220t

    After upgrate from pro to ultimate win7, I found my screen touch does ' t work well.

    It works fine now with the pen of entry. While I touch the screen with my fingers, ofter jumps to the right point, I could use 4 fingers to switch between tabs, but I couldn't scroll or zoom in with your fingers.

    Thanks for anyone who could give me advice.

    Solved. I tried to uninstall ISD Tablet (multitouch driver) front of re-setup and then it works.

  • want to scree of tactile 15t k100 CTO: I want to touch glass screen

    my model of laptop ENVY15T-K100 CTO (TOUCH SCREEN)
    RESOLUTION - 1920 * 1080 P

    I HAVE A BROKEN SCREEN, HOW DO I GET A NEW GLASS AND HOW MUCH WII BEING THE COST OF GLASS SCREEN

    Hello

    Manual: http://h10032.www1.hp.com/ctg/Manual/c04434142

    You need HP 763576-001 (Billboard) part number

    See the Manual Page 24, 52.

    Party store search HP: http://partsurfer.hp.com

    On the other through shops online. Usually in the models of the touch screen of the display panel is not spared separately and together entire screen needs to be replaced. But I could notice manual this Panel is saved separately for your touchscreen.

    Concerning

    Visruth

  • Want my touch screen to operate in Windows 8

    I recently bought a bridge tap all in one computer (model #ZX4351).  I installed Windows 8 on it and now disabled the touchscreen in function.  Please help me understand what's going on so that I can have the touch works again, I don't want to take the Windows 8 back out of it.

    Sincerely

    Lady Laresa

    I recently bought a bridge tap all in one computer (model #ZX4351).  I installed Windows 8 on it and now disabled the touchscreen in function.  Please help me understand what's going on so that I can have the touch works again, I don't want to take the Windows 8 back out of it.

    Contact the manufacturer of the tactile device (bridge?) and ask them if this device is supported under Windows 8, and if so, where to get the drivers for it.

  • Screen touch keyboard and damage the Qosmio X 500-149

    I have a Qosmio X 500 - 149 for Christmas 2010 and I have noticed that the screen is reported in the Middle by the keyboard, it seems that there is not enough space between them when the lid is closed, I love this computer and do not want to see it ruined so early because of poor design or manufacturing defect.

    I might still add some tampons felts to the top of the screen to stop the lid close completely, when it is closed if I look on the side of the X 500 red on the cover Cup is closest to the base at the front, that's in the back near the hinge, obviously this can be solved by the replacement of slightly larger "cover FEET" that would prevent the lid as far down touching.

    Help please.

    Hello Rodeo

    It's nice that take you care of your expensive toy.
    To be honest, nobody here can help directly. Only thing that you can get here is advice or opinions, and my advice to you is to contact the Toshiba service provider in your country and ask for help.
    They can check and, if necessary, replace the feet of cover.
    Do you know how to find phone numbers and addresses of ASP?

  • a quirk of screen touch noticiable i1

    I just want to share my experience and observation that accuracy and behavior of the touch screen ability is very touched (not in a good way) while it is plugged into the USB charger. More initial load (and thus a greater charge current) seem to cause a significant margin of error in the position and the length of the entry of touch screens, which is "cured" instantly simply unplug the charging cable and works on internal battery. Anyone else notice this?

    I had a similar thing during a call to the extensions of telephone numbers, but never when it's plugged, but then as I load when I SLEEP that is probably why

  • The screen, Touch screen still works, how?

    It happened last night. The last time the display worked I started a playlist for my shower. I adjusted the volume to once or twice without turning on the screen, and after drying off the music by removing the speaker again Jack without turning on the screen. The aircraft then went into the pocket of my shirt and I ate dinner and watched a movie, but when I tried to do a little surfing before bed the display does not illuminate. I saw him light up the buttons, but take a few seconds to display when the CPU is busy so I waited, nothing happened. I removed the battery and tried again, nothing on the screen. But then I discovered that the touch sensor is still working, I could slide to unlock and turn off in the standard mode just blind. I looked at all the stickers water they are both white and Red bright x

    While writing this question (I'm sure many of you already know this fact), I discovered that my camera screen is actually three separate functional parts. The capacitive touch screen, always in activity on my camera, the LCD also still in operation and image generator the Led illumination source that lack of a more precise description is grilled.

    So my question is how could happen, it's hardware or software, and what are my options?

    This seems definitely related material for me. Is the phone still under warranty, by chance? Motorola has a repair service that will fix it for free, if it is still under warranty. If it isn't under warranty more there will be a flat fee of $110 for the repairs, which was the price for the last time I looked anyway.

    Click on the link above if you want to see Motorola repair site. I hope this helps.

  • Screen touch questions with speaker-repaired Defy

    After the issued speaker repaired by Motorola UK service last week, everything seemed fine for a few days until - seemingly out of the blue - touch screen seems to lose the ability to properly recognize a tap - and hold. A tap-and-hold was seen as many quick taps, then try to move an icon on the Launcher or by drag and drop to rearrange a list was impossible - I found myself deeply in the unwanted menus in a few seconds. A factory reset solved the problem, but it happened again a few days later. Although, for now, it seems to be held after a second factory reset, I also noticed that I lost the ability to tap-and-hold to remove several whole words in Swype (he removes one and then it's there) and I have to be much faster and more accurate when the tapping and holding in general - I have to move an item in a milisecond to the vibration of the acknowledgement of receipt or it does not and it's there.

    The technician, income worksheet with the phone, he mentions the generic "software update" as one made things. It is not asked for. I can only assume that was last updated Motoblur software 2.51.1 version. One of the "advantages" in the information PDF (see attachment file) was "improved performance to touchscreen. TCH. The touchscreen used perfectly before the update, and I'm not happy that something was done that was not specifically requested - it was only a necessary physical repairs.

    As a factory reset solved the problem, I can't assume this is software and not associated material - but I really don't want to go through the whole kaboodle if this happens again. Any suggestions? Any way I can reset the touch screen issue, if this happens again, by deleting certain files preferably obscure? Any way to go back to the previous version of the software?

    Last update (I hope) - just received the device back from repair and everything seems fine. They have updated the firmware and that you have installed 2.2.2. Of the touch screen is no more.

    I want to thank one person in particular in Motorola UK call centre - if you ever have reason to call them and talk to a Scottish guy called Shaun, you will be lucky. He was friendly and helpful throughout the entire process, including repeatedly remind me to liaise between me and the repair center, gneral updates, provide shipping references, etc.. I wasn't expecting this great help. So if you have to call them, please do not forget that most of the questions appears to be among the less-than-wonderful Ltd SBE, and people on the helpline do their job to the best of their abilities - especially Shaun. If you are being nice to them, you're going to get something done. Thanks Shaun. You the man.

  • Screen touch problems when you use the converter

    We just bought an Envy 27 tilt to our Caravan for all the good characteristics that HP has and TV

    Cause sometimes will want to run the HP converter 12v 400 watt true sine wave.

    We tried this to find a problem, the computer functioned well but the touchscreen ran a muck and did not work as usual.

    So after much googling and some reading I'd like here to answer fo HP.

    As I can't believe, I'd be the first to come on this problem and want to put it all in one in a motor home.

    What I read, it could be a matter of dirty power of the inveter, but we thought we have purchase the best brand true sine wave, we could leave our guys of battery here in Australia.

    Any advice would be received with gratitude.

    Thanks Lou, first of all for your time and on the other hand for your thoughts and advice.

    We have it finally working outside a performance of the inverter with number.

    But I have to say without any worthy of official telephone hotline support of HP.

    Lou, I'm working through several of your suggestions, pending the official response to my survey on what brand or type of UPS or UPS I should use with my desire to tilt.

    Well, it is very sad that a massive company like HP with what you would think would be a very large R & D service, cannot answer a simple question, like what type of UPS or UPS if they recommend to work with the touchscreen of the tilt.

    The poor people, I was talking to, had no idea what I was talking about, or what I was trying to do. How a computer call center peason knows not what a UPS, I can understand on an inverter, but the tech people, these are things really very similar in the different boxes.

    OK, if you have this problem with your inverter and touch screen, first of all not all inverters are equal even in the same brand that I discovered. I want to thank my provider inverter & battery for their time and for allowing me to put in place the HP Envy of tilt on the back of their store and try different UPSs, inverters and batteries.

    I'll talk about brands here, not rat on the brand, but as it may be useful to someone else in Australia in the future. It seems that my "Epower DCAC 400w 12v true sine inverter" wasn't at the height when it came to clean AC power required to operate the touch screen without problem.

    In the end, we tried a "Epower DCAC 1000w true Sine Wave 12v', really just to give it a go, thinking it would be a better to be the same brand as the unit of 400w, well it worked quite OK

    This unit of true sine wave Epower 12 v 1000w, fixed our problem with touchscreen and ran HP Envy tilt as if it is running on AC power.

    If anyone is interested for camper here, I found this configuration to draw between 4 and 5 amperes of batteries of 12v and about 41 Watts @ runing 240 volts a you tube clip.

    Well it is my experiences and the final result, I hope this helps someone else in the future, I'm sure that HP will not be able to.

    Thank you all.

  • HP 15-d040nr: my laptop screen touch hp does not illuminate

    My laptop touch screen computer hp laptop (not sure of the name of the template) does not illuminate. My computer has problems finding networks so I restarted it by using the restart function, and when it will ever stop finished back. When I press the power button / of on the internet key light turns orange and the port on the adapter lights up as usual as well, but the screen remains black. This laptop is only a little over a year, I don't know how to fix it. I tried to unplug the adapter and taking the battery, now the power for 30-60 seconds and everything put back and that does not work, I have read a lot of forums and tried everything but nothing seems to work. If anyone has an idea of what I can do, that would be really appreciated, I don't want to consider to get a diagnosis and spend tons of money. Thank you!

    I ended up taking my laptop to a tech repair shop and found out that the problem was the motherboard - I had to pay for a new part and pay for this service, luckily the place is a fair price and only cost me the price of a new laptop. It sucks that I have had the computer for less than two years and I have to do an important replacement, but at least I know never buy another laptop HP again! Good luck!

Maybe you are looking for

  • Unable to connect to home WiFi

    Hello. Using a 2012 MacBook Pro runs El Capitan 10.11.4 and unable to connect to Wi Fi home exclusively. We had to Time Warner to get out. They gave us a new modem/router and update the connections/splitter in the basement. All our devices but my lap

  • I dropped the iPhone SE in leather by accident case, and he snapped!

    I have a lot of sweat in my hands and I want to test the usability of the iPhone OF, and then he slipped into the Main St, I used it about 5 feet, landed on its side, she snapped. Oh yes, I also saw a fall of leather test case, he survived at 50 ft.

  • I need to change my country but I credit $0.37 I need to pass

    I need to change my country setting in South Africa but the framework does not allow me to do it before I spend the $0.37 in my account. I have no credit more hard to pass, but I can't seem to change the setting that I need before I spend it.

  • Audio device rest in the entry and exit after uninstalling

    Hi, I had a problem... I have installed 2 Boom, didn't really need or it so I uninstalled with AppCleaner as usual (it deletes all files owned by this request, finally almost all files) so, when I had uninstalled I still had the 'Boom2Device' in 'Boo

  • Cutting text

    5 1090223 2248050 1090223 2249475 1090223 2249480 1090223 2253385 1090223 2253390 1090223 2302195 1090223 2302200 1090223 2318565 1090223 2318570 1090223 2327365 1090223 2327370 1090223 2340195 1090223 2340200 1090223 2349065 1090223 2349070 1090224