WAP321 Wireless Clients

Does anyone know how many wireless clients can connect to a single Point of access WAP321?

Good morningChad Alberts

You can have in your device up to 32 users connective, 20 active users.

I hope that you will find this answer useful, if it was satisfactory to you, please indicate the question as answer

and please note useful messages

Greetings,

Johnnatan Rodriguez Miranda.

Support of Cisco network engineer

Tags: Cisco Support

Similar Questions

  • Wireless clients cannot connect to the wired client

    So, I have a server connected to the router via Ethernet, a laptop computer connected by WiFi and desktop also connected via Ethernet. The laptop used to connect to the server, but all of a sudden it no longer, and yet the Office can always connect to the server.

    I have encountered this problem before and disable SIP ALG solved the problem, SIP ALG is always off and wireless isolation is disabled for all my wireless networks, in fact before the occurrence of the issue, no changes to the router configuration. I have also excluded the firewall of the server causing problems as the issue continues to perform with her at sea, even with the laptop because it is the same with any wireless client.

    I use the version of the firmware V1.0.0.90_1.0.90, my server is running CentOS 7 and my laptop and desktop running Windows 10 Pro.

    For anyone else having this problem: I solved by powercycling (power off, wait 10 seconds and turn back on) the router.

  • wireless client cannot see wired - WAG320N

    Hello

    my modem/router WAG320N works fine but the wireless client cannot see wired and vice versa. they are in the same network (192.168.0.), using the same 255.255.255.0 mask, same workgroup firewall and Yes to enable all packages in and out. IP addresses are DHCP form.

    Internet sharing works fine, but when im trying to play any game on LAN wireless clients peuvent see their car but not wired. when im trying to client ping wireless from a wired machine it does not either.

    What is intresting in a DHCP reservation or the ARP table (in router configuration) I can see cable and wireless customers. but still they do not see each other.

    help pls!

    Hi again,

    I went to PC World and they exchanged this WAG320N to another. but this time I went to ASUS RT - N16 and so far all is working correctly. I know its missing adsl modem but got usb 2 and a print server.

    Sorry cisco...

    thx for your help guys!

  • WAP300N: Wireless clients are isolated from my local network?

    WAP300N is an AP, but how can we separate wireless clients who come from the WAP300 on my local network? o option NAT or IP isolation?

    This access point is not an isolation wireless feature. Even if that were the case it would only isolate wireless devices connected to each other not the LAN.

    It's something that your router will have to manage. There are several ways to do this for an example of insulation VLAN or subnet isolation.

  • E2500 and e4500 maximun of wireless clients

    Hello

    I'm looking for a wireless in-home solution, however I could not see the maximum of clients wireless for an e2500or an e4500 on technical data sheets

    Kindly let me know what is the maximum amount of wireless clients that support these devices

    Thank you

    Hello. I found this information on the website linksys KB:

    3 How many computers can I connect to my router Linksys E2500?

    The Linksys router is capable of four 4 connections using an Ethernet cable and 32 computers wireless or wired devices.

    Source: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=6af0fc7147664d2eaef47a2189a1ffce_E2500_FAQs.xml&pi...

    And I think it's the same thing with the EA4500 router.

  • What is the unit of wireless client lease?

    Hi all:

    I that would like to set up the wireless client lease time. 0 means a day.

    I want to set for 5 days.

    What is the unit for?

    Best regards

    Chen min

    1. you cannot change the term of the lease for the wireless clients only. It's for all DHCP clients, whether wired or wireless.

    2. what router?

    3. it is said:

    Client lease time: minutes (0 means a day)

    The unit is "minutes". He's not say this on your router?

  • Wireless clients cannot 'see' the P1102w printer

    I have a printer HP LaserJet P1102w of professional set up and connected to the router wireless BT Voyager 2500V. If other computers are connected by a wire to the router, they can print and they can reach the printer over the network (tested using the ping command).

    However, if they are connected to the router as a wireless clients, they cannot find the printer in the network. If I use the ping command to test the connection, then the command indicates that the destination is unreachable. They can 'see' and connect to each other, but the printer seems inaccessible.

    Any suggestions? Thank you.

    Wireless clients have network cads Intel (R) Wireless WiFi Link 4965AGN (802.11n), the computer operating system is Windows Vista (32-bit and 64-bit). Firewall is turned off. Encryption WPA - PSK with TKIP data encriptación is used. MAC filtering is disabled.

    You have access to the configuration of the router?  Check if "AP Isolation" is enabled.   It is a feature of the router that isolates wired to the wireless clients.

    Of course, there is no point because your problem is the reverse, however, it may be interesting to play with.  Let's start there.

  • Wireless clients do not well known default trust certification authorities?

    I use for wireless PEAP-MSCHAPv2 authentication.  The radius server is a Windows 2008 network POLICY server.  The customers consist of a bunch of laptops (especially on Windows).  Not all of these laptops are members of Active Directory.  Then, pushing any kind of policy to all customers is not feasible (ie.) using a public key private and AD infrastructure to push the server cert and Setup wireless for all members of the domain.  So we decided to use a public key public infrastructure and got a certificate for our radius by a known CA server.  So far so good.

    When customers go to connect, they still get a nasty WARNING saying:

    -STARTUP-

    The credentials provided by the server could not be validated. We recommend that you break the connection and contact your administrator with the information provided in the details. You still can not connect, but doing so exposes you to risks of a possible unauthorized server security.
    Details
    RADIUS server: $radius
    Root CA: $ca
    The '$radius' server provided a valid certificate issued by "$ca", but "$ca" is not configured as an anchor of confidence valid for this profile. In addition, the '$radius' server is not configured as valid a NPS server to connect to this profile.
    -STOP-
    (I replaced the name of the actual radius with $radius server and the CA with $ca).
    Do a little digging, it seems that it is just the expected behavior of the Windows wireless client?  What is the point to get a cert signed by a well-known certification authority, if the customer is still going to get a warning nasty like that?
    Web browsers certainly do not behave like that.  The only difference between a web browser and the wireless client is a browser, you're still going after a URL (IE, you can match what the browser wants to connect to compared to what CN on the server cert is back with) while on the wireless client, you usually won't know the radius server you want to authenticate.  But, in both cases, the server cert is signed by a CA that is known.
    I found a good post that talks about, but no solution:
    Well, I guess that one solution is to manually configure the client for the certificates issued by the CA of confidence and/or configure my radius server in the connection profile.  But that requires the configuration of each client.  And there is no way that we can use AD to push a policy/cert to all customers.
    So my questions are:
    -is that really the expected behavior?
    -so trust generally the default case browsers whose certificates are stored on the operating system by default, but not wireless adapters?

    Hello

    I'm not an answer full but just putting my 2 cents.

    This problem is related with the begging of Windows wireless. Absolutely not your wireless adapter.

    CSSC or Intel ProSet behave differently. (So if you have cards intel, you can check this option).

    But I confess that I've never tried the authentication of the well-known certificate with a public cert of a certification authority

    Nicolas

    ===

    Remember responses of the rate that you find useful

  • Location of the Wireless Client

    Someobody told me that the Cisco wireless control system has a way of determining the physical location of wireless clients. Is it true for this and if so where can I find more information? I have big plans for this kind of instalation.

    It's true, but only if they are taller than 4'11 "...

    just a joke!

    Start your search here:

    http://www.Cisco.com/en/us/products/HW/wireless/products_category_buyers_guide.html#http :// www.cisco.com/en/US/products/hw/wireless/products_category_buyers_guide.html?linkpos=4#number_4

    The accuracy of the location & performance will depend very much of your deployment of AP

  • wireless clients do not receive correct dhcp addresses

    Hi all, I'm sorry first if this is a stupid problem. I am new to Cisco network.

    I need assistance with an existing configuration made by my seller.

    Environment:

    1 core switch - 6509e catalyst

    VLANS configured:

    a. vlan 50 (wireline customers)

    10.0.50.x/24

    The 10.0.50.20 interface IP

    b. vlan 70 (wireless clients)

    10.0.70.x/24

    The 10.0.70.20 interface IP

    c. vlan 192 (invited guests)

    192.168.1.x/24

    interface IP 192.168.1.20

    port trunk d. for WLC

    VLAN native 70

    VLAN allowed 50, 70, 192

    2 cisco 4402 WLC

    interfaces

    a. Management untagged IP 10.0.70.10

    b. ap-Manager untagged IP 10.0.70.11

    c. service-port s/o IP 192.168.10.1

    d. s/o virtual IP 1.1.1.1

    e. guestwlan vlan192 IP 192.168.1.100

    3 cisco AIR-LAP1142N-S-K9

    LAP01 (local interface, WLAN: management)

    IP 10.0.70.21/24

    GW 10.0.70.20

    10.0.50.10 DHCP server (10.0.70.101-200 range)

    LAP02 (comments WLAN, interface: guestwlan)

    IP 192.168.1.21/24

    GW 192.168.1.20

    Server DHCP 192.168.1.10 (192.168.1.101-200 range)

    It is the problem, get the wireless clients connected to guest WLAN

    Leases DHCP of WLAN 10.0.50.10 local (range 10.0.70.101 to 200)

    can someone please help?

    Thank you!

    Bib Hello and welcome to the forum,

    What interface your wireless LAN is mapped to?

    The issue of the CLI:

    Show wlan summary.

    It depends what WLAN on your AP really corresponds.

    In addition, what is the DHCP server configured in the guestwlan of the interface?

    Run the command:

    show inetrface detailed guestwlan

    Kind regards

    Amjad

    Rating of useful answers is more useful to say "thank you".

  • RAP with the wireless client

    Hello!

    I would like to know that a wireless client can associate with the RAP (roof MESH AP). And can the work of the map as a bridge of the Working Group?

    Thank you.

    The great thing about WCS and the location is that you can trace your APs Mesh on a map outdoors and you can visually see the path of the APs Mesh to RAP. Regarding the books from a customer point of view, yet it works just like any other Access Point.

    The problem however is that, with respect to the normal outdoor mesh, access points are further from each other and the customer as in most of the Interior solutions, so location accuracy is somewhat done.

    I doubt you'd be able to say less than 30 feet exactly when a client is located, but if you had a perimeter that you wanted to locate individuals to breast, I don't think that you will have problems.

  • WEP to WPA migration / easy deployment to wireless clients tools

    Hello

    I would like to learn all the tools that I could use for the deployment of wireless to wireless clients settings in our local network. I came across some links in Microsoft using Group by AD (GPO) policy, but GPO seems more than one deployment of operating system or applications, have not seen anything that the wireless.

    You know all the tools, Cisco wireless, or even MS GPO management clients if this can be done with easy deployment of WEP to WPA change.

    The tool should deployment SSID, WPA pre-shared key.

    Concerning

    Hello

    MS group policy will do, no problem.

    If you create a new policy for your ad group (or use your default GP) and go to properties-> the Computer Configuration-> Windows settings-> security settings-> wireless-> Create New strategies-> follow all the next, next, next steps and then add the details of your WLAN.

    If you use a separate policy to the default policy, make sure that the policy options you check otherwise default group policy will stop the new parameters being the subject of a push to your ORGANIZATIONAL unit. The next time that the machine joins the domain, the settings will be drawn down and can connect to the WLAN.

    If you use a MS domain is the best way to do it (both with the help of your customer WZC) and no third party tools i.e. Intel etc.

    I hope this helps.

    See you soon

    Carpet

  • How do I know if the wireless clients are connected under mode N

    Hello

    I would like to know if there is a way to know that wireless clients are connected in N mode. There is some sort of command where can show me that? I Don t have a wireless controller. My access point is AP-1141N-A-K9

    thnks!

    Unless you have a WLC, the answer is 'no '.

  • Wireless Client Hardware/Software Configuration required

    We are building a new 3500 Series LWAP complete wireless network.  With this new wireless network, my boss asks me to provide minimum specifications of hardware and software for all new wireless clients purchased.  I know the stuff of basic 802.11n dual band, etc...  I was wondering if anyone had a good list of detailed requirements that would give me a better case for my clients connect wirelessly on the new network that he would share with me.

    Thanks for any help

    In a nutshell, I need to make sure that wireless clients we for our new network provider can take full advantage of our wireless network.  I want to assure you that I am educated on more details and more basic requirements of 802.11n dual band specification.  There must be more detailed technical requiremetns, I need to know so I can be sure that I don't end up with a bunch of work half puff of wireless clients.

    You can take a look at the tested assurewave Cisco customers and applications for different vertical markets:

    http://www.Cisco.com/en/us/NetSol/ns779/networking_solutions_program_category_home.html

    Level of compliance CCX will also be a good orientation to see if customers will work well with the features of cisco wireless.

    concerning

    Joe

  • Application of Wireless Clients dhcp

    Hello

    I have 2 sperate DHCP servers installed in my office.

    One is hosted in a cluster environment and the other is on a server unique separate windows.

    Wireless clients and my LAN become IP DHCP from the single server

    But only my LAN IP clients get the extended cluter of DHCP server, wireless clients are not able to obtain intellectual property.

    I added the following on

    Controls added to interface vlan 1 on router gateway

    IP helper-address XX. XX. XX. XX (windows cluster virtual server IP)

    IP helper-address XX. XX. XX. XX (IP of server stand-alone windows)

    Additional command on the router to bridge worldwide

    chip-Relay IP dhcp

    Can someone let me know what could be the problem?

    Thanks in advance

    You did not understand.

    Step 1) click on your SSID. The first page should tell you what interface the ssid relates to. normally, you have created an interface vlan corporate and a virtual local network of comments interface.

    (Step 2), go to 'controller', 'interface' and select the interface according to

    There you have 2 fields to enter the DHCP server. Enter your ip addresses of the DHCP server.

    The ip address that will be given to customers is an ip address from the subnet of the interface WLC send the request.

    The fact that your uplink's trunk has nothing to do with this at all and the tab 'Advanced' wlan config is

Maybe you are looking for