WAP54G as Repeater. PC connected but no internet.
router: WRT160N (v2)
AP/Repeater: WAP54G (v3.1)
firmware: updated
First of all, I read that WAP54G is not listed to support WRT160n (didn't know up to this than purchased).
Problem: I got the program to install my router and AP (now coach) as assumed.
same channel
same ssid
same network mode
same level of security (no current)
A wireless laptop has been able to connect to the Repeater with 100% signal, but it cannot access the internet. He says "limited or no internet access" or something along the line.
What I am doing wrong?
It is connected but cannot access the internet? No idea why?
Is my only option wap54g back?
Goal: to connect my PS3 with 100% signal to my router wireless very far from another corner of the House.
The only mode where the WAP54G expects no Ethernet connection is Repeater mode, all other modes can expect an Ethernet connection.
Scenario a.
WRT160N connected to a switch.
WAP54G wired to the same nework as switch.
Another WAP54G in mode (not wired) Repeater to extend the range.
Scenario B
WRT54GL (can be wired to spend or not)
WAP54G (no cable) in Repeater mode for extending the range.
All the foregoing are valid connections.
Note: while the WAP54G is indicated only talk to the another WAP54G or a WRT54G in Repeater/bridge modes the WRT54GL is of the same family and should work, or if our local agent of Cisco says. We have not tested this.
Concerning
Fred
Tags: Linksys Routers
Similar Questions
-
My computer says I am connected but my internet says cannot display this Web page
Vista connection problem
I have windows vista Home premium. my computer says I AM connected but my internet says cannot display this Web page. This isn't the site because I tried other websites
Hello, Scottyookiss00,
Launch IE without Add-ons
Start > type Internet Explorer
Select Internet Explorer (No Add-ons)
You are able to access the site now?
If so, reactivate the modules one by one to determine the origin of the problem.
Try the steps here:
-
dv6408ca connected, but no Internet
HP girlfriend will no longer surf the Internet. It's a dv6408ca Pavilion laptop. We have hit our heads with Bell Canada tent to set up Internet, then thought to implement my dv6825ca instead...
The network, including the WIFI works fine. My laptop was connecting to the Internet is possible.
When you try to put up with Bell directly to the laptop, (74.x.x.x) properly resolved IPv4 address but Internet wouldn't work. Tried ipconfig/release and / renew without result. Notice that NIC 6TO4 and ISATAP adapter did not work right (symbols of yellow warning next to them) in the devices, but Bell Tech Manager we ordered to disable/uninstall. It did not help. We turned on the laptop and the modem and give off a lot and even to reverse the direction of the ethernet cable to Bell technology management (Yes, I know...) before deciding to try my laptop.
Later, after the hanging of the entire network (wireless router) and get my laptop to work, we have tried to make your own to connect to the wireless router. His address is now said to 169.x.x.x internal instead 192.168.1.x. Vista indicates that it is connected to the router (but we know it is a lie with the IP address) and of course not connected to the Internet.
Talked to HP tech phone, it didn't so much as helped give us a price for troubleshooting ($399) because the little light on the front was still blue. If it's Amber, well they could repair it under warranty. Tried to update a few things as well:
-NVIDIA nForce Chipset Driver 5.53 has
-Broadcom Wireless LAN Driver for Windows Vista 6.0 D
-WinFlash for HP Notebook System BIOS (AMD/Vista) F.40
Am I missing something?
Go to support.microsoft.com
Article ID: 930517
I hope it works for you!
-
Satellite A-C50-1KQ - WIFI is connected but no Internet access
Hello!
Today, I bought a laptop TOSHIBA SATELLITE of C50-A-1KQ and my problem is:
When I am connected to my Wlan status says I'm "connected" to the Internet and everything is ok, but I don't have an Internet connection. With a cable, everything is ok, but not with Wlan.
My driver for the card is 10.0.0270 (17.10.2013).Can U help me pls?
Siana
When you open option networks make sure airplane mode is set to OFF, Wi - Fi on IT and I guess that your WLAN is also in the list.
You have the signal full force and the State connected?What happen when you try to open a page in the Web browser?
-
Equium P200 status 'connected' but not internet access.
I have an Equium P200 and finds it difficult to connect to a wireless network.
I have the wireless key and all the information is correct.
Status is connected to the network, but I have no internet access and the message is: connection to the local network only.
I live with two other people who have access, but I can't access the internet.How can I change this?
Thank you.Hello
Please check in the WLan settings if the TCP/IP protocol settings are set to automatic.
Usually, the WLan router supports a range of IP addresses and assigns an IP address to the laptop of the range of IP addresses.
You can find this setting here:
->-Connection network WLan-> properties > network connections (TCP/IP) Internet Protocol-> propertiesAlso, check if your WLan encryption settings are right!
-
3G - connected but no internet
Hi guys,.
I am owner of a fee of xoom tablet. I am very happy with the product, however, I seem to be unable to make connection to the internet using my SIM card mobile broadband Vodaphone Australia. When the card is inserted and no table of tha avaiable Wi - Fi seems to be connected to the Vodafone 3 G (lower right corner), but I am not able to browse the internet, or what I can any other activity requiring internet access. The message I see says:
No network connection
At this point, I don't know if there is something wrong with my setting xoom tablet or I should take this issue with Vodafone Australia. I use same SIM card on my laptom and it all works.
Can anyone provide some tips on how to solve this problem?
Thank you
Prdola,
I agree with Fletch, I take it back to the store and ask them to determine your problem. It seems to be connected to your network of priovider.
-Doc
-
Router WRT160N - Macbook Pro can connect but not Internet
For some reason any my macbook pro can no longer access the internet wirelessly through my WRT160N. It works very well through a cable connected. I can even connect to the wireless router - full signal and get only one ip address, but it does not connect to the internet - via my browser - I get "cannot find server" and "internet connection doesn't seem to work." Or other applications that use the internet don't work.
My mac has always been able to connect to other wireless routers. My router is the latest firmware.
I tried a lot of the things I found in various forums - redo manual settings of router configuration on the router, security (WEP, WPA, unsecured) settings and one suggesting same zap the PRAM. Any Suggestions?
If your MAC can connect to other networks / Wireless Router, it must do something with your wireless network...
In this case a simple reset can help you solve your problem, you need to reset your router to default and then re - configure the router from scratch...
To reset the router press and hold the reset button for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...
If your Internet Service is cable follow this link
If your Internet Service is DSL follow this link
Adjust the settings on your router wireless-
Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
For wireless settings, follow these steps: -.
Click on the Wireless tab
-Here, select manual configuration... Wireless network mode must be mixed...
-Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...-Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
Please take note of the name of the wireless network (SSID) because it's the network identifier...
For wireless security: -.
Click the sub-tab under wireless > Wireless Security...
Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
Please note the 1 WEP key as it comes to the security key for the wireless network...Click the settings advanced wireless
Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
Now let's see if you can locate your wireless network and try to connect...If you have a second see computer/laptop wireless if it connects to your wireless network of...
-
VPN connects but stops internet surfing
Dear all,
When I connect to my corporate network through the vpn cisco client, it connects successfully and all required applications runs BUT
Internet traffic stops, resulting, no. Browsing, etc etc.
Please let know us, if I need to check the configuration of the vpn client or do I need to add something to my cisco 2811 router,
Kind regards
Junaid
There are two ways to achieve this. If you want your users to use their local ISP gateway, you will want to configure the tunneling split for the customer group. Split tunneling is configured on the router and identifies which networks should be protected by the tunnel. Alternatively, you can tunnel all traffic from the client to the hub router when connected and set up hairpin of routing for Internet access. Here's the configs to sample from each.
EasyVPN w / split Tunneling sample:
VPN Client Internet audience on a stick:
-
Wireless internet is connected but no internet connection.
I used Idea_gprs to the Internet on my mobile galaxy s2. But when I attached mobile with my laptop via wifi hotspot mobile it shows yellow mark means no internet connection. I also have the laptop computer on the same BSNL broadband connection. Connection high speed works fine but I cannot attach my laptop to the pc.
Windows IP configurationName of the host...: my PCPrimary Dns suffix...:Node... type: hybridActive... IP routing: No.Active... proxy WINS: No.... DNS suffix search list: local.lanWireless network connection Wireless LAN adapter:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Qualcomm, Atheros AR9285 802.11b/g/n WiFiAdapterPhysical address.... : 74-DE-2B-A8-21-77DHCP active...: YesAutoconfiguration enabled...: YesEthernet connection to the Local network card:The connection-specific DNS suffix. : local.lanDescription...: Realtek PCIe GBE Family ControllerPhysical address.... : E4-11-5B-F7-58-21DHCP active...: YesAutoconfiguration enabled...: YesAddress IPv6 local link...: fe80::9c6f:c68b:7099:bf7% 11 (Preferred)IPv4 address: 192.168.1.2 (Preferred)... Subnet mask: 255.255.255.0.Lease obtained...: Tuesday, November 27, 2012 23:03End of the lease...: Wednesday, November 28, 2012 11:03... Default gateway. : fe80::225:5eff:fe61:97bc % 11192.168.1.1DHCP server...: 192.168.1.1.DNS servers...: 192.168.1.1.NetBIOS over TCP/IP...: enabledTunnel adapter ISATAP.local.LAN:State of the media...: Media disconnectedThe connection-specific DNS suffix. : local.lan... Description: Microsoft ISATAP adapterPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard adapt 6TO4 tunnel:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Microsoft 6to4 cardPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Teredo Tunneling Pseudo-Interface:The connection-specific DNS suffix. :... Description: Teredo Tunneling Pseudo-InterfacePhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesIPv6 address...: d 2001:0:9 38: 6ab8:1842:579:3f57:fefd (preferredEXEs)Address IPv6 local link...: fe80::1842:579:3f57:fefd % 13 (Preferred)... Default gateway. : ::NetBIOS over TCP/IP...: disabledTunnel adapter isatap. {A6912753-123B-462F-A80B-6E43DFDCE741}:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Adapter Microsoft ISATAP #2Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesReusable Microsoft 6To4 tunnel map:State of the media...: Media disconnectedThe connection-specific DNS suffix. :Description.... : Microsoft 6to4 adapt #2Physical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 15:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: Microsoft 6to4 adapt #3Physical address.... : 00-00-00-00-00-00-00-E0Active DHCP.... : No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 16:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: #4 Microsoft 6to4 cardPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 17:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: #5 Microsoft 6to4 cardPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesCard tunnel Local Area Connection * 18:State of the media...: Media disconnectedThe connection-specific DNS suffix. :... Description: #6 Microsoft 6to4 cardPhysical address.... : 00-00-00-00-00-00-00-E0DHCP active...: No.Autoconfiguration enabled...: YesSo my question is how I connect to the internet by using the galaxy s2 on my laptop.Hi Vinod,
The question you posted would be better suited in the Sumsung Forums. I would recommend posting your query in the TechNet Forums.
Sumsung Support Forum
http://www.Samsung.com/Levant/support/troubleshootingguides/supportTroubleShootingGuidesMain.do
Hope this information helps.
-
Ethernet or wireless is connected but no Internet access
My laptop OS is Win 7 64 bit. My laptop able to connect to the internet, but it suddenly can't connect to the internet via the Ethernet or wireless. I tried to system restore and it worked fine, but after I stopped, the problem was took place again. I don't know if because of the McAfee antivirus or window updates because it has some errors (to McAfee) and Skype has been updated before I had this problem (no internet access).
McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.
See the communication from this "criticism" - McAfee
You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.
-
Strong wireless connection but no internet access
I am able to connect to the internet via a cable modem, but when I try to use my wireless router I don't get access to the internet none despite the excellent signal strength. My information on the two devices match. I can pick up other signals fine just not my router wireless.
2010-06-17 13:51, primer McCapps wrote:> * I am able to connect to the internet via a cable modem, but when I> try using my wireless router, I get a no Internet despite> excellent signal strength. My information on the two devices match. I have> can be challenging other wireless signals very well just not my own router.*>What do you mean by "information"?What do you mean by "just not my router? Do you mean that you do not havesee same SSID of your own router (network name) in the list of availablewireless networks? If so, connect to your router with an Ethernet cable,Enter the router configuration utility and make sure that the SSIDbroadcast is set to 'enable '. If your router is already configured tobroadcast its SSID, and you don't see it well be able to see the othernear wireless networks, the portion of your router wireless iscut or broken.Generally, symptoms such as you describe are caused by a defect ofto authenticate to the router, usually due to a mismatchedpassword encryption.--LEM -
Vostro 1000 suddenly wife last night would not connect to the internet. She said AVG found a virus and it has restarted and can print to network printer but cannot display the Page and does not connect Outlook Express.
I tried everything I can think of. Tried to restorting to different day etc and said cannot do.
There the 1390 Wireless Dell WLAN Mini Card.
I tried to reboot in safe mode with network and the card would not work.
I can pink network without problem.
We are on ATT DSL using a Modem cable 2. (HG B 2700). my Dell Inspiron works great on the network, like the desktop computer.
Firewall is disabled and removed the security of the network at the moment.
Any help would be appreciated.
-
I recently updated my iPhone 5 iOS to 9.2.1 and confronted to this wifi problem.
To ANY wifi network, even after having connected and authenticated successfully, I get no internet access. Open a browser, I see an error "unable to connect to the Internet.
I tried 3 different wifi connections and I face the same problem. (Haven't checked the internet works on the Wifi for other devices, including my laptop)
I tried to forget the network and return home, reboot the iPhone several times. Do not reset the network settings and lose some 25 + WiFi password that I saved on my device.
Note: the wifi never worked for me after this Upgrade.
Try going to settings-> General-> Reset-> reset the network settings.
It's the only way you will fix the problem probably. -
I am using windows 7 on my pc. I just installed the new Itunes, 12.3.2.35, and it does not connect to the internet. I ran diagnostics and it said that the only test that failed was "secure link to iTunes Store failed. What could be the problem?
Thanks for any help.
Yes, I had the same issue and have also windows 7. Here's what I did to remedy.
1. go to your Start menu and in the search the bottom type in cmd menu.
2. right click on cmd at the top of the menu, and then click "Run as Administrator". A black box should appear.
3. type netsh winsock reset. It should invite you to restart your computer.
4 restart your computer and then open itunes again.
I did and now my itunes is on the rise and running and connection to the store. I hope this helps!
-
Connected but no internet access? ... Help
Hello
If someone could help me that would be great!
I rented a House and do not have access to the modem. I have a 2 year old HP laptop. When I connect to the internet it says connection to the internet and internet access. then, when I try to watch a video or anything of that kind, a yellow error sign appears in the signal at the bottom bar. It then says connected without internet access!
Why is it that / is there a way to fix it? I need to start the work of the school and it does on every 10 minutes and I have to disconnect and reconnect!
Can anyone help?
Thanks in advance!
Hi Helpthisgirl22,
1. are you using a cable or a WiFi internet connection?2 have had any changes made to the computer before the question?See the methods mentioned below and check:Step 1:Why can't I connect to the Internet?Step 2:Windows wireless and wired network connection problemsHope this information helps.
Maybe you are looking for
-
Hey,. Sign in to Skype in two locations (home and work). I was invited to a new group conversation then at home and it works fine there. When you are connected to Skype to work however, the group conversation disappeared. I'm in another cat to before
-
I'm trying to connect to a new PST to a USB-HS GPIB 3202 diet, but when I open MAX and click on 'Search tools' he finds nothing. NEITHER VISA pilot is listed under the software so I haven't installed. The power is also turned on when I try. I searche
-
HP SimpleSave HD hpmd1000h: HPSimpleSave in Windows 10
I've been a successful user of the system external HD HP SimpleSave backup. After recently installing Windows 10 improvement of 8.1, I just discovered that the system does not work and seems to have been disabled on Windows 10 irreversably. He has be
-
Need help, please. What should I do to route calls to the skill of the agent group in ICM? When I put script just a label - it works fine, when I put the skills group - nothing works... I try to call of the ip phone to the ip phone agent through poin
-
packet loss on the ipsec tunnel
I currently have 2 routers (one at each site). The two are running 12.3 (9th). A router is a 2621 and the other is a 2611XM. This is the relevant config: Router crypto ISAKMP policy 10 BA 3des preshared authentication isakmp encryption key * address