Warning to start the hard disk crash is imminent. Failing all the tests start.

I tried all the start tests and they fail. Have had this message for two weeks now and not real same problems if the startup is very slow.

The hard drive is faulty and should be replaced soon. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

BTW-save all important files, photos etc to external source soon! USB DVD drive.

If you need help with selection and replace of the disk station hard back with model number & full product as indicated on the Service tag on the bottom of the laptop.

Tags: Notebooks

Similar Questions

  • Reinstall CS3 Web Standard after the hard disk crash. Serial number, but check the upgrade is a problem - from Mac to PC, so does not match my product calling (Studio MX Mac)

    I'm reinstalling CS3 Web Standard after a hard disk crash. I have my serial number, but after entering, it does a check of upgrade, and at the time wherever I upgraded I also did a single switch from Mac to PC - so my product calling (Studio MX Mac) has a serial number starting with "WSM600"... ", while the upgrade check won't accept - Studio MX Mac is not yet available as an option. This happened once before and I had to work with a representative by phone (I had to click in a hidden part of one of the activation screens to get a number, if I remember correctly), but apparently Adobe that does more. And the page of "www.adobe.com/go/activiation" the phone message directs you to doesn't seem to have an option for this problem either.

    So, what is the replacement or her work around this problem now?

    Hi lkauffman,

    The serial number must be unlocked for activation.

    Please contact customer support.

    You can even join our chat support at http://adobe.ly/yxj0t6

    Kind regards

    Rave

  • cannot reactivate the CS2 after the hard disk crash - site says I need to talk with adobe (activation can be done online) but the customer support page loop all around - help/activate also not going anywhere - it's a pc - thank you!

    cannot reactivate the CS2 after the hard disk crash - site says I need to talk with adobe (activation can be done online) but the customer support page loop all around - help/activate (since the opening page of CS2) also not going anywhere... it is a pc - thank you!

    message says 'unavailable activation server this time... error code 24:24.

    Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  • Problem after the hard disk crash

    I have a problem after a hard disk crash. I installed a new hard drive and the new windows 8. Then I have instastalled my After effects CS 5.5

    I noticed the serial number and it was accepted, but with the remark that he was an uppgrade.

    I have more aged to their serial number, but do not know how to give them.

    I'm sorry for my English, por, but please help me

    Leif Nilsson

    Leif, please see: error: "this serial number is not for a product calling it" | CS6 cs5, CS5.5,

  • Factory installed Windows XP OS on a Dell laptop and have a hard disk crash. How can I reinstall windows when there is no CD?

    Factory installed Windows XP OS on a Dell laptop and have a hard disk crash.  How can I reinstall windows when there is no CD?

    Order Dell backup discs for the specific Dell computer model you have. Carey Frisch

  • the intelligent control of hard disk detected an imminent failure.

    the intelligent control of hard disk detected an imminent failure. so no los data, please backup the content immediately and run the system diagnostics hard drive test.

    Hard drive 1 (301)

    in the diagnostic system

    All tests are failed...

    Starting the test

    Run in test

    TuneUp System

    I already run the hard drive test before that. but the problem stil occurs. What should I do?

    Yves wrote:
    How can I save the content?

    Hello

    Well, I can now use access HARD drive? In the affirmative, please try this:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3688870&prodTypeId=0&prodSeriesId=3688868&swLang=13&TaskID=135&swEnvOID=4055

    Otherwise, just replace the HARD drive and use the old HDD as a external HARD drive and you MAY BE able to recover data files from there.

    Good luck.

  • Try to reinstall my original Adobe CS after a hard disk crash need help, download again doesn't accept serial number CS?

    Hi, I'm late to the game here, I am trying to reinstall my original Adobe CS after a hard disk crash.  I know that the activation server has been stopped, so I went and downloaded the CS2 version that doesn't require activation.  The problem is my serial number CS is displayed as invalid on the CS2 download, can someone help?  I saw not just a download CS anywhere and their cat had is shown to be completely useless as agent just brutally told me time and again «we don't support that more»

    CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

    .

    You MUST use the special version and the serial number on the page, not your original drive or serial number

    .

    NOTE that CS2 will not install on a "modern" with an Intel Mac

    When you install the special version of CS2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

  • How can I get old libraries when I have to reinstall my lightroom after a hard disk crash

    I need to reinstall lightroom 4 on a new hard drive after a hard disk crash. Is there anyway to recover the old libraries that I created from my old hard drive and transfer it to the new hard drive?

    You have the catalog and images of the old hard drive?

  • Try to reinstall lightroom after a hard disk crash - new hard drive

    How can I re - download lightroom after a hard disk crash. I have the serial number of the purchase but can't seem to reinstall. Help please. Thank you.

    Moving to this discussion in the download, installation, commissioning of forum.

    Holliday162 you can download a new copy of Photoshop Lightroom from your account.  Please see find a download link on Adobe.com for more details on how to download your purchased software.

  • I own CS3 and I had a hard disk crash. As I had no chance to 'disable' CS3 before getting a new computer, I can't save CS3 on my new computer. It just error. What can I do? I can't put in a support ticket.

    I own CS3 and I had a hard disk crash. As I had no chance to 'disable' CS3 before getting a new computer, I can't save CS3 on my new computer. It just error. What can I do? I can't put in a support ticket.

    Contact via Live Chat customer care officer.

    Contact the customer service

    Nancy O.

  • intelligent control of hard disk detected an imminent failure

    Intelligent control of hard disk detected an imminent failure on disk 1. I have a Pavilion g7.1081nr laptop.

    Hello

    If you start getting SMART errors, this would indicate that hard is defective and must be replaced.  If you can still boot into Windows, I strongly suggest to do a backup of all your personal files, etc., as soon as you can.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

    Kind regards

    DP - K

  • Satellite A200-137 - cannot install windows after the hard disk crash

    last week my a200-137 crashed and now I have the new hitachi 500 GB hard drive on it, even before the accident.
    I have install with Toshiba recovery DVD windows Vista on it and after succesfull installed I have to start windows, it says prepare for first use windows then I have to wait a while and then I get the message that windows setup is not complete. But it is complete!

    After trying to install 3 times with recovert I tried to install windows xp.
    After a few minutes and transering files, I don't get the message no disc found! It is said that there is no hard drive on the laptop!
    But when I start the start menu or the settings menu, I can see the 500 GB Hitachi hard drive!

    So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?

    > So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?
    On this virtual path, it is not easy to say why you can not install recovery image. It would be interesting to know if the same thing will happen when you replace the HARD with the same or identical.
    This title was the original HARD drive?
    If possible, try to get original Microsoft installation disc and check if the HARD drive will be recognized by Vista or Win7 and of course if you will be able to install and boot OS preinstalled.

    Regarding the installation of Windows XP Home edition: it is well known that the WXP installation will start properly due to lack of SATA driver that must be loaded prior to installation of WXP begins.
    Check out this forum and you will find hundreds of threads with detailed explanation why this happen and what can you do about it.

  • Blue screen errors, hard disk crash and now the windows activation question

    These last six months, I had a problem of error frequent blue screen crash. Suddenly last month the drive crashed, hard my computer didn't load windows on several effors, finally the hard disk had to be changed. Reinstalled the operating system after copying the files of restoration for windows, now windows says is not a genuine copy. Now, today still crash blue screen error after from once again, he says that this window is not genuine. MT laptop is a sony vaio 3 years old and came with a preinstalled windows 7 licenses and the key that I use is one written behind the laptop on the microsoft certificate.

    He seems to have removed the incompatibility of CID at least.

    Please try activating suggestion of Andre now - the system is now simply say that it is out of time, require activation by telephone.

    activation by telephone (call of the operator)

    Click the Start button

    in the search box, type

    SLUI 4

    and press the Enter key

    Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

  • Hard disk crashed using code produces the same different hard disk... Help?

    I am able to use the same product key for windows 7 if my hard drive crashed? My hard drive has been a * on me. I replaced and tried to use the same product key for windows 7 on the same computer, but with a different hard drive. Is this possible or do I have to buy another. That seems unfair, but I must say that I bought windows 7 and now I receive a notice of infringement on the desktop on the windos 7.

    License status: Notification
    Reason for the notification: 0xC004F009 (grace period expired).
    Remaining Windows rearm count: 4

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • hard disk crash (intelligent control error 0303) cannot use the recovery

    I have a hp pavilion dv6-6050 and it crashed suddenly I can't use recovery option, because it cannot read hard drive

    I tried to connect the hard drive to another pc via sata-usb cable and the other pc has detected hard disk read errors

    How do I return the recovery partion so I can use it on a new hard drive

    Hello:

    You will not be able to.  When the disc is dead, it took the recovery with her partition.

    You will need to order a set of recovery discs, and they can only be used if you buy a hard drive of the same size or more large storage capacity than the one who died on you.

Maybe you are looking for

  • Impossible to get Samsung SSD EVO to work on the Satellite L50-A0424

    I tried these last days to set up an EVO Samsung 500 GB SDD on my laptop, a Toshiba L50-A0424 and I can only call an exercise in frustration. First of all, the Samsung comes packed with a SATA cable USB cloning of the original hard drive is a pain. A

  • filter on data design

    Hey, guys I have problems when I desgin a data filter something like when the measured value has been 3,7,2,9,4, 6... etc. I want to display is the value of (3 + 7 + 2 + 9) / 4 (7 + 2 + 9 + 4) / 4, (2+9+4+6)/4...etc As calc an average value over each

  • Product key Windows 8 should be not BIOS-based on new laptops from Dell?

    Hello My brother-in-law had a HD failure in his Win8 Inspiron 14z laptop. It had not generated the recovery DVDs. I replaced with a new HD sound and used the Dell recovery DVDs on my daughter, I created 14z to restore with the Windows 8 factory image

  • Cannot use Bluetooth notebook Mouse 5000 - mouse in Windows 7.

    I do not understand, cannot use the notebook mouse 5000 in Windows7. When the Logitech mouse can. I can be found by bluetooth, but it has not installed all the drivers. And it cannot be used at last. I have no why material made by Microsoft may not b

  • Will not pump VMRemovedEvent for VM deleted

    I deleted a VMS in vCenter Server today by using the option "remove disc".  I can see the next task in vCenter:Task: DeleteVirtualMachineI run the following script to get the event that corresponds to that using powerCLI:Get-vieventplus-maxsamples-st