Watch on satellite question

Hello everyone, I am a new user.

I'm having a problem with sleep, firstly if I close the lid of the laptop that he wakes up again without a full reboot. It all happened since I'm using the Toshiba Recovery CD. None of the options standby works. I tried to use the Toshiba HWsetup Control Panel and get an error "ended common Module. If I try to use the Power Options Control Panel and the Power Saving panel says he is not running. I looked in this Panel and the Toshiba Power Saver system is already selected and on the Advanced tab, it already has the value "when I close the lid of my computer" and below that it shows 'Stand by '. If I click on "Apply" or "OK", I am told to set up in the control panel of the energy saving options. That's why turn us round and round in circles and nowhere.

I can't help thinking that I need to reinstall something but I don't know what. Can someone please help? Can I download a utility to do this? Any help and advice would be appreciated.

Sylvia

Hello

In my opinion the stand-by function doesn t work because of the common modules.
This application is very important for other options.
I put t know why modules common don t work correctly, but I recommend you to delete common modules and saving energy and after the reboot to reinstall both programs.

Tags: Toshiba

Similar Questions

  • Question about DVD watching on Satellite 2450-201

    Hi, I have a satellite 2450-201.
    and I'm sure that when I had it first I could watch DVDs, s without having to start, only now, when I try this the computer starts completely before it will play, now perhap it did this before but I didn't take so long to start, because there was not much on it to slow it down, what I want to know is : is it possible or just my imagination, if not how to reset it please.
    Thank you in antisipation
    Pete

    Hi Pete,.

    You don't say what operating system you have. To watch DVDs without having to start you would need to have Windows installed MCE. He would use a small area of your hard drive to store the necessary software to allow you to play DVDs without having to start your main operating system.

    If you have XP (Home or Pro), then it is more likely that your startup process now takes longer than before so that you can start your DVD software. In this case check for unnecessary tasks or processes by using the Task Manager and I would also recommend spyware scanning, removing everything you find and run Defragmenter and disk cleanup.

    HTH

  • C75-A-14 X display satellite / questions on watch video clips online of the screen

    Hello

    my new laptop, purchased on 11/10/2014, has developed a worrisome problem that the screen seems split in two color/resolution/contrast different versions on the same clip video I can watch, he began to do what 2 days ago.

    What is happening on youtube, yahoo, bbc, itv, essentially videos online on any website... P A I N F U L L!

    It is quite upsetting to see that it is brand new in just 7 days!

    Any ideas?

    Thank you

    Nick

    The same video / clip is divided into two different parts where the color and brightness is different?

    This happens to you streaming and watch video clips on the internet and also videos of DVD and video files stored on the HARD disk using tools of different media player?

    Because the same problem is seen on the external monitor?

    We greatly appreciate your comments

  • Screens of friends do not show up on my watch - and other questions

    I just got a 42mm Apple Watch Sports yesterday and it works for the most part very well. A couple of problems so far-

    I have an iPhone 6s more and it is common on iOS. I have associated my watch with her.

    Under the terms of the app shows I have implemented a few friends on the App screen friend and I still yet to appear on my watch. No icon, no application, nothing. And research online, I can't find a question or topic that deals with this.

    Other problems involve other apps - I have to check with them. Most pressing is sleep ++ who says disabled its because he claims that I am "unauthorized - please ensure that sleep ++ received permission to access your data in motion and fitness.» He has access to. So it's frustrating.

    Finally - I "Hey Siri" put in place on my watch, but if I say "Hey Siri" only my phone responds. I thought it was supposed to work on the watch? Or is it works through the watch on my phone and my phone's talking to me instead? I would turn off my phone to test but obviously that won't work because then my watch is not able to access Siri.

    Not a novice to Apple but am kind of feeling frustrated, and as I am "don't get it" right now. If the friends screen would show, that would make me a lot happier.

    Thank you!

    Stephanie

    Hi Stephanie

    Friends are not accessible via an icon of the application on Apple Watch. Instead, to see friends on your watch, press the side button once briefly.

  • Satellite question: form

    Hello Experts,

    I am facing a problem with the satellite tag: form. I use this tag in my template and on submit, it calls for a site entry that performs an operation (it sends e-mail.).

    The model I used the tag Satellite: form is cached.

    Question:

    For some, this form publishes is a success and after a few strokes, suddenly it displays error "401 Unauthorized".  Session is not valid. Please re-login. Bad request.

    After clearing the cache, again it works correctly.

    Please suggest some ideas to fix. Thank you.

    The hidden _authkey_ parameter should be added automatically in the , but you are right that the page should not be cached. If it gets cached with a single value for _authkey_ applications for the other sessions will all fail.

  • I bought a smart watch GT08 and question is why Apple makes it so difficult to plug anything using Bluetooth?

    GT08 Smart Watch does not connect using the applications in the App Store. Why is this? I use a 4 s.

    And why Apple made things so difficult to connect Bluetooth devices. And again, I bought this watch, but none of the bt applications declaring work. I'm just trying to get my upcoming sms through the watch.

  • Re: Problem of fashion watches over Satellite L300 - 12K

    Hello

    When I push the power button to exit sleep mode, sometimes, I get the reboot screen and computer blue
    What can I do?

    Thank you

    Your question is short and without any relevant info can help.
    So I give you the same short answer use the recovery image and reinstall Vista. With own OS preinstalled, it should work without blue screen.

    If you want to chat more seriously about it we know what OS you are using. Let us know since when you noticed this problem. Let us know if you have installed a software that can be responsible for this.

    There is no magic solution to these issues. No one knows what you have done with your laptop. No one knows your personal settings. Nobody knows what third part software is preinstalled and runs in the background. There are too many factors that may be responsible for the blue screen.

  • How can I check sound version and watch on Satellite M30 power?

    I have a Toshiba Satellite M30 series and have lost my audio. I don't know if I checked something l ' turn off or what. Can someone give me some ideas on how to check it? The other is stupid - how do I know what saving use?

    Right now my setting is on Power Saver 2 and I'm having problems, that I found an answer to this, of overheating, but it was suggested to check the energy saving, how do you know that one to use?

    Any help will be appreciated.

    Hello

    It's very simple. You should visit the Toshiba driver page and you will find the correct drivers and utilities also energy saver.
    After the installation of the power saver you use defined parameters. The cooling method, you can define if you want to cool the most powerful CPU for maximum performance.

    Now on your noise problem:
    Well, first go to Device Manager and check the status of the sound card.
    If there is everything is fine and there is no exclamation point yellow if all the drivers are installed and working properly.
    In this case I recommend to enter the control panel and select the Audio & Sound devices. There you can check if the 'secret' was not enabled and if other controllers are defined at the higher value.

  • Satellite question

    I family of Satellite notebook, but I don't know the model. How can I found? The notebook is about 3 years (or more) and I think it's that is purchased in the United States. Is there any toshiba software that can tell all the information about this notebook?

    Thank you

    Laurence

    Hello

    It is very easy to know what s the name of notebooks.
    Check the bottom of the unit. There should be a label with the serial number of notebooks.

    Check it out!

  • Right-click on the P50T-B Satellite questions

    I don't know how to change the setting so that I can have a traditional right click on the touchpad.

    I know that you can tap with two fingers to do features like right click, but when I use Microsoft word or Facebook I can't understand how a word spelled right click and see how its spelt. When I right click on a work in word or facebook the cursor turns into the scroll.

    Need help please, it gets really annoying to take a minute to understand how to spell a word because I can't right click

    Thank you!

    Hello Thomas

    In my opinion, you should open all the touchpad settings and learn how it works. There are so many different settings and use the touchpad can be defined by the laptop user. You can disable all functions you don't like n and almost everything you want to change.

    Please, take some time and check it all. Learn how it works.

    If you still have questions let us know.

  • Recovery 1105 satellite question-

    Ran the recovery (set of three) and full cd to the Windows XP screen, however, no prompt appears to reinsert the CD n ° 1, which I suppose that contains the OEM operating system and now the laptop starts with the XP logon screen but not further.

    Hello

    Is maybe my English is not good enough, but I didn t you understood. Maybe you can explain your problem in more detail.

    Is that you need to start your device while CD1 recovery is in the CD/DVD drive and it should be set as first boot device. When the procedure starts recovery you can choose how it should be installed (European units of standard and expert mode). The installation procedure illustration is like an MS-DOS application and you can see how many percent is installed. When the installation procedure is completed, the unit restarts automatically and you must go to the hollow Windows Setup before you can use OS.

    Sorry, but at the moment I can't tell you more about your problem.

  • L750 WiFi blank SuperHub satellite question

    I see that many users have Wi - Fi problems with Atheros AR9002WB card. Until last week, I had no problem at all to connect to my cable Superhub Virgin (Netgear) router, which had worked very well with my L750 since I bought it in March. However, since then, I had a lot of bad to do both to authenticate, despite inSSIder recognizing the network with a signal strong. According to Virgin Media the Atheros card and the Superhub are incompatible and they are suggesting a USB adapter for my problems, is not ideal. I tried to update the driver for 9.2.0.419 from the previous 9.2.0.206, but although at the beginning, it worked, as soon as have hibernated the latop and turned on again, the problem reappears.

    What I don't understand is why it worked fine from March until early August and then abruptly stopped. Virgin has replaced the SuperHub, but it does not solve the problem.

    because no one from toshiba will provide a fix for this, here is what I found to work, I have a L750 so and exactly the same problem encounted, but not with blank superhub.

    -----------------------------------------------------------------------------------------

    It is an atheros modded driver advanced settings in the wireless properties.

    You can download it here http://www.bundabergrumcollectors.com/whirlpool/atheros_v9.2.0.105_v1.31.exe

    She has been tested as well when the laptop goes to sleep and wakes up and is always connected.

    --------------------------------------------------------

    IT IS WHAT I SELECTED

    11(d) Mode switch: disabled

    802.11 high speed Bluetooth: activate

    802. 11b preamble: long and short

    Adhoc 11n: disable

    Select ad-hoc channel: 10

    Antenna switch: antenna B

    Automatic baud rate: activate

    Background scan On / Off: off

    MIMO-dynamic energy saving: disable

    Green TX: off

    Map records: 256

    MFP: disable

    Network address: absent

    pcieaspm: L0s, Off, L1, Off

    Legacy power save mode algorithm: survey no PS
    PowerSave mode: off
    energy policy (background) saving: saving energy inherited
    political energy saving (best effort): energy inherited
    (video) political energy saving: saving energy inherited
    legacy energy saving energy saving policy (voice)

    Radio on / off: on
    Reception buffer: 256
    roaming policy: very high
    roamrateA: 54 Mbps
    roamrateB: 11 Mbps
    roamrateBonly: 11 Mbps
    roamrssiA: 15
    roamrssiB: 24
    roamrssiBonly: 8
    RSSI threshold: normal
    Valid scan interval: 60
    transmit buffer: 512
    transmitting power: 100%
    Wireless mode: 11n (2.4 ghz) and g and b

  • Hang watch over satellite A110-233 PASB2E

    Hello
    If anyone has any suggestions on how to help with this, I would be very grateful.

    Sleep never worked on this laptop. He's going through the motions and then crashes at the idle screen preparedness. From this point, I have to restart by pressing the power on button for a few seconds.

    I tried updating BIOS, reinstall energy saving and the power of Eve driver all nothing doesn't.

    Apart from the above, the laptop is as I bought from PC world. All software from Toshiba loading always (lots of it) and I havn't to measure anything.

    Thank you
    Dan

    Hello

    It is not easy to say why the night before does not work or crashes.
    Have you tried to recover the laptop with recovery CD Toshiba delivered?
    Try it!
    Additional you could disable some background processes in the msconfig

  • Can I watch Blu - ray on my Satellite C75-A-13W discs?

    Hello

    Can I watch on Satellite C75-A-13W BR discs?
    According to user s manuals document I should be able to use BR discs on this machine.

    Good bye
    Stones

    Message was edited: assignment has been translated

    Hello

    According to the specification of the specifications [url http://www.toshiba.de/laptops/satellite/c75a/satellite-c75-a-13w/] [url] your laptop has only super multi DVD drive, you can not use Blu - Ray discs.

  • Satellite A660-1FH fails to back off with Win7 64-bit

    Hi, a friend of mine asked me to watch his Satellite A660-1FH (PSAW3E). It is currently running windows 7 64 bit. There initially could not activate so I said I'd take a peek.

    It just would not start the power on, it would go beyond the initial screen then cursor would appear at the top on the left and flash a couple of times and freeze. I started and you press f2 to view the bios and the HARD drive was top of the list so I pressed f10 and saved and started. starts fine then he thought may have been an accident that has caused and continues in windows and update for him.
    then rebooted and froze! It seems when the restart is selected, it does not restart, everything freezes.

    I tried to use hirens resumed but it cannot see the HARD drive when it is started! weird. I got in the car and he ghosts for safety.

    Earlier I installed 8 company windows x 64, and it presents the same question. the drive works fine in other pc so you need another piece of equipment. I had already updated the BIOS under win7 and checked all drivers.

    I just got a strange win8 startup message saying that a boot or partition file was missing and could not start but him repressing the power button, it starts well.

    It does not always restart under a clean install of win8. I came here because I found a post with the same or similar issue. Any suggestions? Thanks Mark

    > it just would not start the power on, it would go beyond the initial screen then cursor appears at the top on the left and flash a couple of times and freeze

    The blinking cursor appears in the upper left corner indicates a malfunction or memory from HDD. I think you should check both sides.

    You said that the drive works fine in another PC. Do you hear the HARD drive?
    If so, then the HARD drive is OK and the RAM is probably the troublemaker.

Maybe you are looking for