Watch OS 2.2 update

I just bought a brand new Apple Watch tonight and brought it home to put in place. As I started the pairing, he said before pairing I needed to update the software. I started it, and it seemed to take a while on my home wi-fi. Have downloaded correctly, however it is showing the audit in the watch on the iPhone application and has been like this for about 30 minutes. Any thoughts on what I should do? Should I cancel the update and try again later? My wifi connection speed is very good, and my 6 s iPhone is updated to iOS 9.3.1.

Hi Chris

Try the following steps, which can help to solve the problems at the latest to step "review".

However, do not interrupt your iPhone or watch if the process has already reached the point "Setup."

  • On your iPhone, close the watch application and all open applications:
    • Double-click the Home button, and then drag upward on each preview of the app.
  • Remove the magazine from your watch and restart both devices:
    • The two put together, and then restart your iPhone first.
    • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;
    • To reactivate: press and hold the side button until you see the Apple logo.
  • Replace your watch on the charger, keep your iPhone connected to the power supply and try to update again by following the instructions here:

Tags: Apple Watch

Similar Questions

  • Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install the updates but the shut down the computer, but the computer stops until they install.

    Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.

    Hello Tallydupp, welcome.

    Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
    Try to uninstall it if it exists.

    Let us know what happens

    Thank you! Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Apple Watch - ring exercise not updated

    Hello. Just today, I had problems with my Apple Watch Sport (series 1) watchOS3, which included the workout and the App running activity.

    Today, I went for a Cycle in the open air which I followed him on my Apple Watch (I brought my iPhone with me). I finished training and saved. In total, I had worked for 53 minutes, however, he wasn't to my activity.

    In business, he told me that I've only made 26/30 minutes of exercise, even though at the bottom it says 'Outdoor - 8.67 km Cycle'.

    I called the Apple Support, but he just told me to disable the pairing and re - pair my watch, which did not help. I was told that they were "redevelopment of their tools" and therefore could not diagnose my problem, so they told me to call back tomorrow.

    Why I write here today, it's just to see if someone has had this experience, and if you know how to solve this problem. Any help is appreciated.

    Thank you!

    Hello

    Progress toward your daily goal of exercise of credit, the application of the activity aims to identify the activity equal or exceed the equivalent intensity of a brisk walk. This requirement applies for general daily use and during the recording of training through the app to training sessions.

    Appropriations for the financial year is awarded for each full minute during which this condition is fulfilled. It is possible that not all of your cycling workout meets this requirement.

    The definition of a brisk walk varies from one person to another and depends on your personal information. To verify that this is correct - and update over time:

    • On your iPhone, in the application of the watch, go to: My Watch (tab) > health > edit - tap and adjust the settings, then press on in fact.

    Apple Watch uses different sensors and data sources to track the results of training sessions, depending on the type of activity. For example, with Apple Watch (first generation) and the models of series 1, the watch can access data matched iPhone GPS if it is taken along during the walk outdoors, running and cycling training. (Series 2 has built-in GPS).

    Calibrate your watch can improve the accuracy of the estimates made by the activity and workout app app. More information and instructions for calibration of your watch are available via the link below. The article also includes instructions for resetting the calibration data and leave.

    If you prefer to receive credits of exercise during the duration of your training sessions, regardless of their estimated intensity levels, follow them through the application of the training session using 'Other' as the type of activity. This credit a minute of exercise for each minute of the workout. Active calories will be estimated at a rate equivalent to a brisk walk or based on the data recorded by the heart rate sensor, according to what is higher.

    More information:

  • Contacts missing after Apple Watch 3.0 app update

    I just updated my Apple Watch to 3.0, and the Contacts app disappeared.  It shows on my iPhone, but not in the small icons on the watch and Siri on the watch says that I don't have a Contacts app.  Messages on my watch are coming through, but as numbers instead of names.  I tried a hard reset of the watch with no luck.  Any ideas?

    Hello

    Under watch OS 3, the friends feature (which was available in previous versions) comes over and there is no direct replacement for it.

    When making calls or sending of new messages, contacts instead can be selected via the phone and Messages applications or using Siri:

  • my watch always prompt to update 2.2.1

    I did not use the beta software at all on my watch, just my phone and I have already deleted the profile of bet, I turned off both devices gave him a few on each and still unable to get the 0 s 3 update.  He said that my watch is up-to-date with 2.2.1

    Hello

    You must first upgrade your iPhone to iOS 10 (do not forget to make a backup first):

    Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  • Serious problem with watch since the software update

    Hello

    I have a serious problem with my watch since to do the update of the software this morning.

    Watch dial keeps flashing between the Apple logo, dial and access code.

    Watch does not respond when you try to enter the access code or button does not not so can't turn off to try to restart.

    I tried to disable pairing my iPhone 6s but watch be message saying "can't match Apple Watch - Activation lock could not be disabled on your Apple Watch because of a server error.

    Nothing seemed abnormal during the update, I just let him do his thing.

    Any help would be welcome.

    With great thanks

    Nicola

    Hi Nicola

    Try restarting your watch force: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo, then release them and expect the watch again.

  • Activity do not sync after watch os 2.2 update

    Hello

    it been 2 days now that I updated to look at OS2.2 and did not get synced on my phone (stand, move, exercise) activities.

    As you can see int ht screenshot, I'm quite a heavy user of this feature, so I'm pretty bummed I lost my story for 2 days now.

    Unfortunately, I have not found all of the messages in the community that address specifically, however I tried to re-initialization, reset, disconnect, etc and nothing seems to work.

    Thank you in advance for letting me know how to proceed.

    Santiago

    Hi Santiago

    Check the fitness of follow-up is always on:

    -On your iPhone, go to: settings > privacy > Motion & Fitness - check that fitness and health monitoring are enabled.

    -On your iPhone, in the application of the Watch: Watch My > privacy > Motion & Fitness - make sure the heart rate and fitness tracking are each enabled.

    Otherwise, given the steps that you have already tried, can contribute to restore and restore your iPhone and Apple Watch:

    • Backup your iPhone:
      • Via iCloud (encrypted as standard), or;
      • via iTunes on a computer - IMPORTANT: choose to "Encrypt iPhone backup", so that the backup contains sensitive data, including the data of health and activity, saved passwords and settings Wi - Fi.
      • https://www.Apple.com/support/iPhone/backup/
    • Erase content and settings on your iPhone:
      • iPhone: settings > general > reset > erase all content and settings.
    • Pair and set up your watch:
      • Choose to restore the watch (backup restore) when provided the opportunity during the whole.
      • This will restore most of your data and settings, with a few exceptions (for example cards Pay Apple, access code).
      • Set up your Apple Watch - Apple Support
  • Everyone can not open Wechat of the Apple Watch after the last update?

    After the update for Wechat around the end of 2015, I can't open the app to Apple Watch.

    Whenever I tried to open the app, a loading screen came, and then the application leaves itself.

    Someone help please?

    Thank you!

    I already have the Apple Watch combat and reinstalled the Apple Watch. I can always open the app.

    I use a system of 2 OS on my watch and an iPhone iOS 9 5 C.

    If you have not already done so, it may help to update your iPhone and Apple Watch for the latest versions of software.

    Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

    Update the software on your Apple Watch - Apple Support

    If not, try the following steps:

    • On your iPhone, go to: settings > General > storage & use iCloud:
      • In the storage section: press on managing storage > music > Edit (top right corner) > delete all the songs.
    • Back up your iPhone to iCloud (do not reset your iPhone later, just to make the backup):
    • Also back up (but does not synchronize) your iPhone to iTunes, select the option "Encrypt iPhone backup" (even once, do not reset your iPhone later, just to make the backup):
    • Then try again to open WeChat.
    • Music can be added to your iPhone again after trying these steps.
  • Apple Watch don't stay tuned since iOS 10 and watch the OS3 to update!

    Upgrade to iOS 10 and OS3 shows my Apple Watch frequently disconnects throughout the day on my phone and the only way to solve this given to deactivate Bluetooth and turn it back on. Y at - it a bug and if yes, what is the difficulty?

    Hello

    It can help to disable the twinning and re - pair your watch.

    The app shows on your iPhone takes a backup of your watch when unpairing via the app choose to backup restore when the possibility to put courses in place. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

    Cancel the twinning of your iPhone - Apple and Apple Watch Support

    Set up your Apple Watch - Apple Support

  • Watch OS 3.0 update will not send notifications of message

    I recently installed watch OS 3.0 and iOS10.  I don't get notifications on the watch.  I have checked all the notifications settings, restarted the two devices and even if not matched / repair my watch and nothing works.  Any ideas?

    Hello

    Make sure the wrist detection is enabled:

    • On your iPhone, in the application of the watch, go to: My Watch (tab) > General > detection of wrist.
  • Watch crashed during the update to look at iOS 3

    Just crashed and sent me to www.apple.com/help/watch

    Hello

    Try restarting your watch force: press and hold the two buttons for at least 10 seconds, until you see the Apple logo.

    If the problem persists, contact Apple technical support or make a Genius Bar reservation for assistance:

  • iPhone 5 s Watch 9.3 iOS updated despite already updated to 9.3

    I've already updated, without no problem, iOS 9.3 on my iPhone 5 and iPad 2. I understand 9.3 was re-released for the iPad 2 because of issues people had with her which fortunately doesn't affect me at all. Even my iPhone 5s updated without problem. So I'm puzzled to see that my iPhone now shows an update to iOS 9.3 when currently already running iOS 9.3.

    What is going on?!

    I think one might think they have reissued 9.3 today with a new generation. I a 5s and failed to update earlier. I got the message "not connected to the Internet. I have removed the old update and have not yet installed a new.

    ads-affected-by-activation-lock-issue/ http://9to5mac.com/2016/03/28/Apple-re-releases-iOS-9-3-for-Older-iPhones-and-IP

  • Watch you the 20141 updated - it creates new problems

    I just updated to PP 20141 and open a project that worked correctly on 2014, but is now defective.

    The sequence is a short trailer that uses several video files on V1 with mask of follow-up on the V3.  The multiple camera sequence use the mask properly but the following clips are cropped!  Cropping is caused by the mask and can be removed if the trajectory of the mask effect is disabled.  There is no set of cultures in the mask.  The 2 pictures show what I'm describing:

    Cropped-by-mask.jpgMask-disabled.jpg

    Please can someone tell what happened to him and if there is a solution?

    After the update, I'll have to create a new project file (seems that the news is not compatible with the old), then clean the database cache, and then I have to close the program and start it again so that it can generate new compliant files.

    I tried to use the 20141 with another project, and it seems that the PP has just stopped!

    Looks like I'll have to go back to the last weeks of the program.

    Anyone else having problems?

    Hello

    In Premiere Pro, can you go to the file-project general settings and change the engine software video rendering only in mode and check if that helps the situation.

    Thank you

    Arjun

  • Impossible to watch flash videos after updating to the latest version

    Hi, I hope you can help.

    Adobe Flash has been asking me to update for a while and I continued to hit remind me later

    now, the other day that I decided to update, it was the worst decision I've ever made.

    all flash video play more smoothly, they are restless and pause for a few seconds even with the audio

    even if I let the video buffer completely its still the same

    I use comodo dragon a version of chrome

    I disabled all extensions, no change

    I deselected activate hardware acceleration, no change

    I checked my plugins, there is one for flash player

    Then I tried internet Explorer and the latest version of flash to it, still no change

    I even tried to go back to an older version of flash, no change

    I don't know which version has been installed before the update.

    I find myself scratching my head here

    I will add that I am running on i7 with 16 GB of ram and geforce 780ti

    Dragon 33 - Flash Player issues workaround solution! -News / announcements / Feedback - CD

  • Round back app update will remain off on Apple Watch

    I go into the app to watch on my iPhone turns off refresh app backround for certain applications, but they are all light up immediately after I leave the app shows the two watches and iPhone are updated to latest iOS

    Hi there repetrillo,

    I understand you are trying to disable the updating in the background for some applications, but they just light up immediately as soon as you exit the application. I'd leave the app shows first:

    Force a nearby application on your iPhone, iPad or iPod touch

    Then restart your iPhone and the Apple Watch and try to activate the settings back again.

    Restart your iPhone, iPad or iPod touch

    Restart your Apple Watch

    Thank you for using communities of Apple Support, let us know how it goes.

Maybe you are looking for

  • I've updated to 6, but the home page still says that I'm not on the latest version.

    I updated 2 times but the home page still says that I'm not on the latest version.

  • hpofficejet pro 8620: access to printing double-sided on officejet pro8620

    Just bought hpofficejet 8620 had problems with the installation. Finally up and running.  How can I access the functionality of duplexing.  My duplexer is in position.  Is there some setting or application to allow printing side two.  It does not app

  • BlackBerry Z10 Backup does not

    I use the ease of backup to my Z10 since I bought it a month ago.  Now, it has suddenly stopped working and I get a communication error message. Any ideas anyone?

  • Facilitating ease of access

    So I'm legally blind, have been for a long time.  Before Windows 8 I had a ton of accessibility software that I could use for the magnification and screen reading.  Since the release of Windows 8 and raise your feature decreased to about half of what

  • Location of RMAN recovery

    Hi all;Try to learn the concepts of rman recovery.RMAN > backup the database archivelog;From backup 30 July 14Current archived logusing channel ORA_DISK_1channel ORA_DISK_1: from archive newspaper backupsetchannel ORA_DISK_1: specification of archive