Watch the keep on moving up and down

Similar Questions

• Satellite A215-S4757: screen started to shake, moving up and down

  I bought my laptop about a year and a half and no major problems until this week.
  It started a few days when the image on the screen started to shake, moving up and down and lines began to appear on the screen and get out. I restarted the computer, but the screen would not power on. After a few tries, it ends by came and worked fine for a while before he has begun to do the same thing again. It happened a few times until yesterday when no matter how many times I tried it didn't come.

  I don't think that the problem is only with the screen because I have the laptop connected to my TV via the VGA cable and image out there doing the same thing once more. Also although powers mobile upward and the power light lights, satellite words do not light upward unless the screen lights up.

  The CAPS LOCK button also has a light on what should be enlightening (pressed) so if everything works fine and it does not either.

  Does anyone know what I can do to fix this?

  Thank you.

  Hello!

  Have you installed the latest driver to display on the Toshiba site?
  http://www.CSD.Toshiba.com

  In the worst cases, the motherboard should be replaced. I doubt that s a display problem internal because you have the same problem on the external monitor.
  So contact the nearest ASP.

  Good bye

• Is the a similar to the old central action for older versions of Photoshop where the individual could until load and down load the web site actions

  Is the a similar to the old central action for older versions of Photoshop where the individual could until load and down load the web site actions

  This is the new site for extensions, actions, etc.

  https://creative.Adobe.com/addons

• When I use the arrows or the right scroll bar up and down, it is very slow. What can I do to fix this?

  When I have one on the internet and you want to scroll up and down, I use the arrow keys or the scroll bar, but the screen is moving slowly in the kind of a stall model.

  Any suggestions?

  Hello

  • This happens only on Internet Explorer?

  You can refer to the following steps:

  Step 1:

  Verify that if the problem exists in Mode safe mode with networking, if the computer works as expected in mode safe, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Step 2:
  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

• How to enlarge the fonts in the fields of data up and down my Dell computer

  Somewhere along the way, the size up and down my Dell has reached the size of ants boogers - almost. How to get em ' full-size '?

  Somewhere along the way, the size up and down my Dell has reached the size of ants boogers - almost. How to get em ' full-size '?

  ====================================
  The following links may be worth a visit:

  Windows Vista - Customization Menu
  http://KB.wisc.edu/page.php?id=5196

  How to change the font size in Windows Vista
  http://www.wintuts.com/how-to-change-font-size

• Watch the Black Border ATI HD4670 and ST2410 HDMI Cable

  There is a black border on my screen that I just put in place today 21/01/2010 from Dell which is approximately 1 "all around.

  The office is set to 1920 x 1080 at 60 Hz

  I can't find a setting in ATI Catalyst Control Center to adjust it to the height and width of the full screen.  I found this post http://en.community.dell.com/forums/p/19309246/19620047.aspx#19620047 with these tips...

  «Open the Ati Catalyst Control Center - digital Panel properties - attributes - resizing the Image and select "Adapt the image to the size of the full panel".»

  and have not found this device setting of anywhere.

  Anyone know the solution? Do I need to download a newer version of the CCC?  Thank you

  It's the implementation using an HDMI cable

  GIGABYTE GV-R467ZL - 1GI Radeon HD 4670 1 GB 128-bit DDR3 PCI Express 2.0 x 16 HDCP Ready CrossFireX Support video card http://www.newegg.com/Product/Product.aspx?Item=N82E16814125277 and the Dell ST2410

  I just fixed the problem BLACK at the BORDER.

  In the Catalyst Control Center (CCC for short), check if the following settings:

  Right-click on your desktop and go to the Catalyst Control Center. Switch to advanced mode if it isn't already.
  -At the top left, click on the menu "Graph", then "Desktops & displays.
  -For your desired display, left, click on the small black triangle in the lower part of the screen, on the SMALL image, not the BIG and click on 'configure '.

  This part is very CRUCIAL. There is a little image of a TINY TINY TINY TINY arrow display down FAR LEFT of the CCC menu. It's this LITTLE ARROW that you click on the button that says "Base...". "and the button that says 'OK' when you click the arrow of llittle black small-small (not the big black arrow in the middle of the CCC window you will be able to click on 'Configure', then the following will be available):

  There are 6 buttons at the top of the CCC

  Attributes

  Avivo color

  Scaling options

  HDTV support

  Screen LCD Overdrive

  Pixel format

  Under attributes

  -Check the box "Enable the GPU scaling" and select "scale image to full panel size. Hit apply.

  Under scale Options

  -There is a scroll bar to set Underscan and Overscan. I updated 0% Overscan and everything was perfect instantly.

  Click on apply

• At the same time, moving audio and video to another layer

  I have all my files audio and video, linked between them on my calendar, so they slide left and right together, but if I try, say, drag a video clip up to V2 V1 layer the audio remains on A1 (even if it remained linked to the extent where your stay directly on the video clip and do not get synchronized). Is there a way to move audio and video of a clip to the same layer numbered in one step, rather than to move them separately?

  Don't let the mouse and the SHIFT when moving the audio part that is.

• I have a blue line on the left side, going up and down my screen.

  I have an iMac 21.5 inch late 2009 model and running El Capitan V. 10.11.6. My problem is that I now have a blue line that extends from the top of my screen, starting to the right of 'File' and runs all the way down. The only thing I did recently was last updated iTunes on 18 July and I updated on July 20 of the OS that was yesterday.

  The single trouble shoot I did is off my computer for a few hours. However, the line is always there. Someone at - it this experience? I have attached the Image after reboot of my iMac.

  

  Have you tried a system management controller - reset?

  Reset the management system (SCM) controller on your Mac - Apple Support

  This reset also covers certain aspects of the resolution of the screen:

  How to reset the NVRAM on your Mac - Apple Support

  Not sure if the symptom is indicative of the material cause; using above

  Links may be able to solve the problems, and then decide if a visit to the CENTER or

  Apple Store (engineering) for inspection would be wise.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider

  I hope that a reset or other aid.

  Good luck & happy computing!

• I tried to watch the show from Stephen Colbert and not only audio video. Why?

  I'm a Firefox user dedicated for about 10 years now. The new current issue is: can I watch is no longer the Stephen Colbert show for some reason any. I have always used Firefox to watch this show. Now, I get only audio no visuals. I had to go to IE and it works perfectly. I only use his show as an example that might help with your application. I was curious if it's specific to Firefox and it is. IE displays video and audio. Advice?

  You can try to disable the HTML5 Media Player by setting these false prefs on the topic: config page.

  • Media.DirectShow.Enabled
  • Media.Windows - Media - foundation.enabled

  You can open the topic: config page via the bar of address and you can accept the warning and click "I'll be careful" to continue.

• I disabled Adblock to watch the content on Att Uverse, and since then it won't work anymore.

  I disabled Adblock Plus to watch a show on Uverse TV the other day, and when I went to him, again, it had disappeared; so I re-installed, but it's still not there despite the fact that he claims to have installed on my computer.

  Disable you Adblock more addons bar or a toolbar, click the icon and choose 'Disable all' what uncheck - mark the line. Nothing should disappear from your toolbars or be disabled or uninstalled modules.

  How do you turn it off, if you have disabled the extension itself it will appear at the bottom of the list of extensions such as being turned off, turn it back on and restart Firefox and you that you be back. In the extension options enabled once click on Options and tick all the items there and it will be active and visible in the bar of the modules. The list of options in the list of modules is identical to the list 'preferences' in the module in the icon bar. The options there is the same as the options in the list modules menu options. Disable menu options is identical to the item 'disable all '. ' Ctrl + / ' will show or hide the module bar.

• How do I enlarge the bookmarks dropdown arrows up and down?

  When I click on the bookmarks drop down menu (on the line with the edit file, see stuff) there is a small arrow at the bottom and top to scroll my list of bookmarks that I should really better organize! Is there a way to make this little more grand/more big burst? It's so hard to find the mouse on this small area, especially on my laptop...
  Thank you
  Carwarr

  Maybe use a scroll bar instead. It is a faster way to get to the desired position. I use the following code in userChrome.css to have scrollbars in the bookmarks menu and the bookmarks toolbar.

  Add code to userChrome.css below @namespace.

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #bookmarksMenuPopup scrollbox,
  #personal-bookmarks scrollbox {
   overflow-y:auto!important
  }
  
  #bookmarksMenuPopup .autorepeatbutton-up,
  #bookmarksMenuPopup .autorepeatbutton-down,
  #personal-bookmarks .autorepeatbutton-up,
  #personal-bookmarks .autorepeatbutton-down {
   display:none!important;
  }
  

  • http://KB.mozillazine.org/Editing_configuration
  • ChromEdit more: http://webdesigns.ms11.net/chromeditp.html

• When I try to go on "fullscreen" while watching the screen tube u develops and becomes empty. The sound still works. I have Firefox. Can someone help plse?

  I can't watch any of the programs in U tube on change too many full-screen. yesterday everything was ok. I tried a restore of the system without result.

  Hello

  · Is the behavior even with Internet explore?

  If Yes, then you can follow the procedure:

  a. Click Start, click Run, type desk.cpl and then click OK.

  b. click on the settings tab and then click Advanced.

  c. on the performance tab or on the Troubleshooting tab, move the hardware acceleration all the way to the right (Full position).

  d. click OK and then click Close.

  e. If you are prompted to restart your computer, click Yes.

  If the problem is only with Firefox, you can post your request in the support forum of Mozilla for assistance: http://support.mozilla.com/en-US/questions

• The screen is moved backwards and there is black space at the bottom of the screen

  Original title: MY HEADS CUT OFF

  When I turn on my screen has its head cut off and I have a black 3-inch space on the bottom

  No guarantee...

  Simultaneously press Ctrl + Alt and HOLD > down, arrow press see if you can get to the screen to move down from the top. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Strip tip that displays the coordinates while moving (delta) and size when resizing went

  I've been using LabVIEW since version 3.  I used to use it full time, but only part-time and the.

  I have a Win XP Professional computer running LabVIEW 7Express, and I have a Win 7 Home Premium computer running Labview 2013.

  I have always used and relied on small pop - up (Advanced band, ToolTips) which indicates the coordinates when you move an object on the screen: delta 4, 19 for example; and shows the new size when resizing: 4, 19 for example.  It works my Win XP Professional LabVIEW 7Express machine but NOT on my Win 7 Home Premium LabVIEW 2013 machine (and I need to work on this machine).

  I think there are 3 places to search for:

  1) LabVIEW, tools, Options, block: see the tip terminal strips - "this option is enabled on both machines.

  (2) LabVIEW.ini - "I can find similar entries on both machines.

  3) strips of MS Windows Advanced treatment - "not sure about it, Win 7 Home Premium is not easy to use with this and web sites I've found seem to point to key in regedit which seem not to be there.

  Thanks for any help!

  Nevermind, I figured it.

  My Win 7 machine is dual-boot.  I have a SSD LabVIEW 2013, on the other hand I have LabVIEW 2012.  I looked on the side of 2012.  I noticed that there are 3 places that you can treat with strips of tip under LabVIEW Options: front panel, block diagram AND UNDER environment.  Who has been disabled on my side LabVIEW 2013.  I fixed it.

  I think I have disabled all 3 places when I was trying to stop one of the most annoying things in LabVIEW.  When interacting with case and sequence stacked Structures, that terrible pop-up ads (Advanced band) would appear and cover the value of the Structures or Structures of stacked sequence case who I was interacting with blocking my view.

• Stop the video after sliding up and down in the article

  If this question has been asked many and most of them give the tip to a white page video/audio file that refer to the.

  This does not work for me. All audio and or video are ignored by all actions.

  Video continue to play in the background.

  Anyone here have a better solution for this?

  as a side...

  How it to the design process, I want to say these are the rules of conviviality right base? whenever someone passes away or departs a video, they won't look so why let the video game in the background at all?

  Why not auto pausing and resuming automatic again?

  I mean I know Adobe is a big company, but for the last two years I was very disappointed of the DPS product as a whole (especially considering the price we pay for this product).

  Hi Patrick,

  If you add an audio only a second on the article and the auto muffler play. any other

  audio stops because the iPad can only play a media at a time.

  Thank you

  Afonso Upreti