Watchdog PXI

Similar Questions

• PXI-8110 update to Windows 7 image

  I was wondering if someone has updated their controllers to a new OS?  Specifically, we received earlier this year a couple of PXI-8110 controllers incorporated with the gradient to XP option.  But now we wish we had Windows 7.  I was jumping that NEITHER would be able to provide the Windows 7 CD recovery of for this controller (because Windows 7 is an option) and I would have to pay the Bill for a license of Windows 7.  However, they said that it was not possible (OR - Please correct me if I'm wrong) and I have to install it myself.  So, any advice on this process would be appreciated.

  Thank you

  Paul

  Here are two INF files for drivers who have not installed correctly the first time.  Sara had sent to you about a month, there are and said they worked for you.  I am posting here in case someone else needs them as well.

  Note: This is not the ideal way to install drivers for a PXI controller.  The controller should come image correctly with all necessary drivers and the recovery disc as well.  If however you encounter the same situation, then you can try these.  They are drivers for the delivery of trigger PXI and WatchDog Timer for Windows 7 on the PXI-8110.

• PXI-8184 restarts junk

  Hi all,

  This is my first post so I apologize if I missed something and also for my English

  We have conducted many years successfully applying LabVIEW RT (version 8.5.1) on a PXI-8184 (2 PXI-4472 modules, 1 module PXI-6624, chassis PXI-1042, 1 module PXI-6224). In our maintenance protocol, we loaded a picture of the traditional configuration of PXI (that we always use), using the system replication tool, as we usually do.

  A few days ago, we did it. After the application has started running, suddenly restarted PXI. Since then, the PXI application always restarts junk.

  This does not happen if we run the application directly from LV (no build request).

  It is important to mention that we have no trace of falls or visits that could affect the integrity of the PXI system. We tried different solutions, but nothing happens (resetting, reinstalling,...).

  First it hardware or software explanation to this? (watchdog, CMOS).

  I would really appreciate any comments.

  Greetings.

  Roberto.

  
  

• Watchdog question along with BACK Smurf attack on router and duplicate MAC hardware address

  Before we get into too much detail, you should know that my understanding of the internal processes of a MAC or any computer self-taught self and therefore flawed and elementary is at best.  Specifications for my MAC will be provided below my Epistle.   The bottom line is that I caught an employee a long time ago on my iMac while I'm out and I noticed that she was doing something with the watchdog.  I thought nothing of it at the time, but the watchdog of name stayed with me.  Since that time, over a year ago, there were several problems with why online banking and other fraud concerns.  If the 2 are linked, I have no way of knowing.  But my iMac is essentially useless at this point, there are countless accidents every day... but before you spend $3,000 on the new, I thought that it prudent to ask for assistance from several sources informed.  My console, I noticed several instances of the hardware MAC (DAD) duplicate addresses.  I'll give you the result below.  I have also connected to my router Xfinity and that this month there were 5 distinct "SMURF ATTACKS" or DOS attacks.  Yet once, I'll give you the result below.  And finally, by connecting to my computer in standard mode, watchdog daemon doesn't seem to exist. However, when in safe mode, there is, but he is unable to initialize.  I followed Davis Linc instructions (from a question someone asked about watchdog not booting not) and his bash script output will be provided below.  Any help would be appreciated I run my business from my iMac and say State it mildly, I'm tired of spending days trying to solve this problem.

  Be aware that, in my view, that my virtual RAM is low, although I can't find a definitive answer.  Support Apple says simply drag the hard drive and start over.  Maybe they have reason.  No matter, I know that I have provided too much information below, but I don't have the knowledge to know what is important and what is not germain to the issue.    Thank you in advance.

  I. SMURF ATTACK - denial of Service

  FW. IPv6 BEFORE drop, attempts of 1772, 2016/3/13 12:44:59	Firewall blocked
  FW. Fall of IPv6 ENTRY, 22 attempts, 2016/3/13 12:38:09	Firewall blocked
  Blocked Unallowed devices, 17 attempts, 2016/3/13 12:14:43	Machine blocked
  FW. IPv6 FRONT drop, 3209 attempts, 2016/3/12 23:57:02	Firewall blocked
  FW. Fall of IPv6 ENTRY, 251 attempts, 2016/3/12 17:46:33	Firewall blocked
  Device MAC: 70:48:0F:82:02:43, 11281 attempts, 2016/3/12 12:52:06	Machine blocked
  FW. LAN2SELF DROP, 2 attempts, 2016/3/12 09:31:22	Firewall blocked
  FW. IPv6 FRONT drop, 2622 attempts, 2016/3/11 23:56:33	Firewall blocked
  FW. Fall of IPv6 ENTRY, 301 attempts, 2016/3/11 23:17:54	Firewall blocked
  FW. IPv6 BEFORE drop, attempts to 2392, 2016/3/10-23:56:04	Firewall blocked
  FW. Fall of IPv6 ENTRY, 323 attempts, 2016/3/10-23:35:55	Firewall blocked
  FW. IPv6 BEFORE drop, attempts at 2669, 2016/3/09 23:57:34	Firewall blocked
  FW. Fall of IPv6 ENTRY, 186 attempts, 2016/3/09 23:38:57	Firewall blocked
  Device MAC: 38:71: A: 18:D2:C9, 14185 attempts, 2016/3/09 23:32:32	Machine blocked
  FW. IPv6 BEFORE drop, attempts to 2986, 2016-3-08 23:57:12	Firewall blocked
  FW. Fall of IPv6 ENTRY, 305 attempts, 2016-3-08 21:55:14	Firewall blocked
  FW. IPv6 BEFORE drop, 999 attempts, 2016/3/07 23:57:50	Firewall blocked
  FW. Fall of IPv6 ENTRY, 105 attempts, 2016/3/07-23:53:20	Firewall blocked

  WiFi] [1393]: Wifi WPA2-Personal security mode 3/2016/02 05:40:06Notice [Dhcpc] [2224]: erouter0 T1 expires, Enter rescued State 2016/3/02 01:11:12Notice [962] Firewall: DoS attack - SMURF ATTACK IN = erouter0 OUT = MAC = 10:86:8 c: 50: *: *: 00:13:5f:05:ab:e2:08:00 SRC = DST = 46.229.168.201 *.155.194.241 LEN = 40 TOS = 00 PREC = 0x20 TTL = 41 ID = 29965 PROTO = ICMP TYPE = CODE 13 = 0 2016 15:16:16Notice / 3 / 01 [Dhcpc] [2224] : erouter0 T1 expires, Enter rescued State 2016/2/29 05:08:01Notice [962] Firewall: DoS attack - Smurf Attack IN = erouter0 OUT = MAC = 10:86:8 c: 50:2 *: 00:13:5f:05:ab:e2:08:00 SRC = DST = 73.155.194.241 LEN = 40 TOS = 00 PREC 209.126.116.176 = 0x20 TTL = 35 ID = 31525 PROTO = ICMP TYPE = CODE 0 2016 = 13 / 2 / 28 04:26:41Notice

  II. customers blocking Shutdown

  My iMAC struggles to sleep and I noticed this from the Console.  Not sure if that means anything, but I wanted to offer it.

  com Apple.ctkpcscd (164)

  19/03/16 4:54:57.728 Photos [34785] PM: customers blocking the closure:

  IPXProjectBrowserController2 (0x7ff8dd84e480), County of registration = 1

  PAImageItemController (0x7ff8df12bd70), County of registration = 1

  IPXProjectBrowserModel (0x7ff8d8f86600), County of registration = 1

  IPXAlbumsBrowserController2 (0x7ff8dd840600), County of registration = 1

  PAImageItemController (0x7ff8de2af680), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7da20), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda534f0), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda73b10), County of registration = 1

  IPXSharedTabBrowserModel (0x7ff8d8f81760), County of registration = 1

  RKBackgroundImageProcessingContext (0x7ff8db6b29e0), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda535a0), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7db00), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda73bc0), County of registration = 1

  IPXDatabaseYearsController (0x7ff8ddcb6f70), County of registration = 1

  IPXMainWindowController (0x7ff8d8c47380), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7c390), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d3d0), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda73c70), County of registration = 1

  _IPXOneDatabaseSpecificVersionsController (0x7ff8df01c0a0), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d480), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda73d20), County of registration = 1

  IPXDatabaseYearController (0x7ff8dda7dcf0), County of registration = 1

  IPXProjectEditorProxy (0x7ff8d8c42d90), County of registration = 1

  IPXDatabaseYearController (0x7ff8dda11bd0), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d530), County of registration = 1

  FaceRecognition (0x7ff8d8fa9f40), County of registration = 1

  IPXDatabaseYearController (0x7ff8dda7dda0), County of registration = 1

  IPXDatabaseCollectionsController (0x7ff8ddcb7220), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d5e0), County of registration = 1

  IPXAlbumThumbnailGenerator (0x7ff8d8d85a50), County of registration = 1

  IPXDatabaseYearController (0x7ff8dda7de50), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d690), County of registration = 1

  IPXFolderThumbnailGenerator (0x7ff8d8fceeb0), County of registration = 1

  PAImageItemController (0x7ff8de31e4a0), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d740), County of registration = 1

  IPXEditorModel (0x7ff8d8c41030), County of registration = 1

  IPXImportBrowserModel (0x7ff8d8c22230), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d7f0), County of registration = 1

  IPXDatabaseYearController (0x7ff8dda7e010), County of registration = 1

  IPXVersionsMonitor (0x7ff8de143b60), County of registration = 1

  IPXPhotosBrowserModel (0x7ff8d8f79d20), County of registration = 1

  IPXVersionsMonitor (0x7ff8de255a70), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d8a0), County of registration = 1

  IPXDatabaseYearController (0x7ff8dda7e0c0), County of registration = 1

  IPXEditorModel (0x7ff8de626590), County of registration = 1

  IPXEditorModel (0x7ff8ddbaadf0), County of registration = 1

  IPXBadgesOverlayController (0x7ff8ddd5ab10), County of registration = 1

  IPXAlbumsBrowserModel (0x7ff8d8f86540), County of registration = 1

  19/03/16 4:55:03.411 Photos [34785] PM: customers blocking the closure:

  FaceRecognition (0x7ff8d8fa9f40), County of registration = 1

  IPXPhotosBrowserModel (0x7ff8d8f79d20), County of registration = 1

  IPXSharedTabBrowserModel (0x7ff8d8f81760), County of registration = 1

  IPXImportBrowserModel (0x7ff8d8c22230), County of registration = 1

  IPXAlbumsBrowserModel (0x7ff8d8f86540), County of registration = 1

  The closure of blocking app which seems to be Photos.   I would back up all your files here first - probably two external backups - then try a photo / iPhoto repair pass - stop pictures / iPhoto, then launch the application with the option key (also labeled alt on some keyboards) and command.   You should get a dialog box asking you if you really want to fix the library.   If this fails, I would export or copy everything I could and rebuild each photo / iPhoto or - given other issues here - the whole of the environment.

  Regarding the duplicate addresses, you have an airport or time Capsule?  And if you want and need to have Wi - Fi and network assets, wired (such as it is apparent that this is the case), you will need to configure Wi - Fi as a point of access (the ' bridge'), or configure separate subnets for traffic.   This can be automatic with some integrated network devices, but may require one manual configuration with others.   But if you have a Gigabit Ethernet connected and active cable, there is usually very little reason to have Wi - Fi connected and active.

  What did or didn't happen here with unauthorized access is not likely going to be addressed either through the forums, many different things can happen to a system that has been compromised or has suffered an attempt to compromise, unfortunately.

  In regards to your concerns around safety and handling, the system has been tampered with, Apple is correct.    Down your data to one or two probably of external storage devices and reinstall from verified distributions and do not migrate existing applications or tools.   Reinstall those distributions checked.    Also remove all products the security module, anti-virus or anti-malware tools can be added here - what that looks like Symantec is installed - according to the suppliers for this withdrawal.   Additional security tools can cause a variety of problems in the system.

  You'll want to have these external backups in all cases, as one of the causes of the reported behavior is a peripheral fault storage.  Systems to get slow and flaky when storage is a failure.   A Time Machine configured and running, or some other regular module backup tool, at least.

  What is happening outside your router's problem of Verizon and just the normal dreck that happens on the rest of the Internet.   This is not your problem, unless you opened Internet access paths to the inside through the router on your network, and so does the rest of the Internet your problem.

  I'd probably also avoid installing the software add-on from HP, if you print only and you don't need features beyond what is in the base OS X distribution.

  The process of CEPHtmlEngine consuming resources system generally involves the Adobe software; see the for more details on this Adobe forums.

• 3G Watchdog

  I've upgraded to the new version of 3 G Watchdog; However, it does not update the volume of traffic. After 4 days, I always show 0 because the total traffic.

  I uninstalled and installed again but same result - ZERO content traffic.

  If anyone has had this problem or is there a switch to turn "on" the counter?

  Thanks, y ' All!

  UPDATE

  I sent Richard 3GW responding very quickly and, as an entrepreneur myself which imports / distributes audio components ultra premium, I was very impressed with this level of support and knowing how important both product & customer support can be to any company's long-term success.

  Richard has provided a number of suggestions re: System settings, tandem of reboot, resolved any outstanding issues.

  FYI - traffic counters are selected automatically by the software 3GW so my attempts to change was unnecessary. Now, all the counters are working as expected and still very close to actual updates ATT data use.

  I want to publicly offer my sincere "Thank you" to Richard for taking time from his schedule to offer its help to solve my problem of meter.

  I strongly recommend 3GW and will purchase its upgraded version to support his wonderful product.

• Using SMU 6612 to measure PXI-6528 pulsewidth channel - channel is not available.

  Hi all

  I use SMU 6612 card counter to measure the pulse width of the signals to PXI 6528 DIO card. These two cards are in the same chassis PXI (NI-SMU-1065). I could measure the pulse widths using the example LabVIEW 2013 Counter - pulse width of reading and (over) frequency example of .vi. However not all channels of the PXI-6528 map appear in the drop-down list of channels on the pulse width can be measured. Try to connect any other channel that those which are available in the drop-down list returns the error. On the PXI card port 6528 0,1 and 2 are entered ports and port 3-5 are output ports. I can measure the pulse on port 0, 3 width and line 0 port 1 and 4.

  Can someone explain to me why don't see port 1 or port 2 channels in the drop-down list or force the VI to measure the width of pulse on these channels?

  I can plug PXI-6528 external input channels SMU 6612 counter input channels and measure the pulse width, but if possible I'd like to avoid the external wiring between the 2 cards.

  Probably not.  Unless the routing plan is in fact reversed as it seems a bit sorta that.  As stated on my system, you can route * of * a port of entry * to * RTSI, or you can route * of * RTSI * to * one output port.  This does not make much sense to me, but that's what I see:

  

  If the routing card * is * reversed, your only likely workaround without physical wire would be to generate impulses in question of port 3.  It's pretty clear that 1,2,4,5-tetrachlorobenzene ports have no ability to interact with the bus timing, physical wiring would be the only option.

  -Kevin P

• PXI-1033 not detected until the pc is rebooted

  We have a chassis NI PXI-1033 with a PXI-5114 and PXI-4072-PXI-6221, fist, that he had failed to recognize and install drivers for motherboards. The search in the knowledge base, I tried workaround by disabling the PCIe mode ' bcdedit/set pciexpress forcedisable' command and rebooted the pc. Then the system recognized and installed the drivers for all the hardware.

  Disabled the PXI system at the end of the day. The next day, after activating the system, he did not recognize the hardware, returned changes to aid 'bcdedit/set pciexpress by default', then restarted the pc. Once again the material have been recognized.

  I tried to change the configuration on the PC BIOS, without success. The PC is an ACP-4000 of Advantech. We need to restart PC after a cold start so he could recognize the hardware and load drivers.

  Is this normal?

  Concerning

  The PC is under Windows 7 Pro. I searched on google for similar problems, where I found one where someone said that the culprit is that the chipset of the motherboard not give not the PCIe card delay what he needs on a start cold in order to be recognized. A reboot gives the time required and the card works.

• Delay time 4070 PXI DMM

  Hello

  I use a PXI-4070 DMM and DotNet "SoftwareTriggeredMultipointAcquisition" example

  I want to trigger the DMM4070 with the AuxTrig entry to the front of the instrument.

  This works very well, but how can I change the time out the of triigger?

  It is now on 2000msec. I want to 10000msec.

  When I us the example and do not trigger in the 2000msec I get error message saying:

  ModularInstruments.NIDmm: The operation did not complete in time maximum allowed. Timeout: 2000mS.
  Error code:-1074126845

  Thanks in advance

  Wissam

  Hello JaredRo

  I can set the time-out period now.

  Problem solved. Thank you Manny

  With greetings

  Wissam

• PXI SFP 5105 configured Vs Acquisition VI

  Hello

  I recently started to use the NI PXI-5105 cards, I need to capture (noise level<20KHz) on="" top="" of="" my="" dc="" signal,="" i="" used="" software="" front="" panel="" to="" capture rising="" edge="" of="" an="" analog="" signal i="" was="" able="" to="" capture="" signal="" when="" it="" meets="" my="" trigger="" requirements="" same="" as="" configured="" acguisition="" example="" vi="" also="" vi="" recommended="" input="" signal freq=""  ="" is="" 100khz,="" what="" changes="" i="" need="" to="" do="" in="" order="" to="" make="" this="" vi="" to="" trigger="" when="" the="" noise="" level="" on="" my="" dc="" signal="" exceeds="" certain="" point="" can="" anyone="" please="" help="" me="" with="" this="">

  Thanks in advance!

  Hey djo.

  If I understand your description, the best sounds of relaxation as it can be a trigger of hysteresis with coupling AC trigger in order to eliminate the effects of your DC signal. You will then be able to adjust the amplitude of the noise that you are looking for as the level to which you want to trigger off. You can find information about the options available with the help of scanners trigger high speed OR under Fundamentals > trigger.

• While with PXI-5122 digitizer loop counter

  Hello world

  I am a beginner of products NOR. Currently I use the PXI-5122, 2014 Labview for the ultrasonic signals. I have a problem when you count the number of signals using an external trigger (by a function generator) source. When I trigger the digitizer under 50 Hz, the meter is working properly (a single trigger = a signal). With a frequency greater than 50 Hz of trigger, the meter is malfunctioning. For example, with the shutter to 50 Hz and 500 number of signals, the counter takes 10s to get data. But, with the trigger of 100 Hz and 500 number of signals, the acquisition time was always around 10 s.
  You can see the code in the file attachment.

  Please let me know if you have any suggestions or recommendations for my situation, I would appriciate that.

  Thanks in advance!
  Best regards
  You

  WorldALoneMe,

  Looking at your code, you're software re - trigger your device.  With your Setup, you configure the digitizer to hold a single record acquisition in your "A - Scan.vi".  This VI opens the resource OR-SCOPE, configure, captures, returns the data, then closes the resource OR-SCOPE.  It then does this for each unique A-Scan that you do and would be the reason that b Scan.vi takes so long.  It appears then that fewer than 50 Hz, this reset any software and reconfiguration and the acquisition can occur without missing a trigger, but more than that, your triggers occur faster it takes to do these things.

  What you need to do set up the digitizer to a multi-record acquisition.  This is done using the 'niSCope configure horizontal timing.vi' and wiring in a number higher than '1' in the entry "number of records".  "You can find an example of how to perform a multi-record acquisition if you open the Finder of example OR > material input and output > Modular Instruments > NOR-SCOPE > Getting Started > niScope EX Multi Record.vi.

  In this example, the digitizer is only once configured, and it returns all the documents requested at the same time.  For your application, each record would be a simple Scan of A, and then if you configure 500 files, your B-Scan would be 500 wide.  This time allows the material to rearm between triggers that is much faster to do it in software.

  For a verification of more complex example out (in the finder of the example) "niScope EX Multi record go get more available Memory.vi"

  Kind regards

  Nathan P.

• 5154 PXI trigger on the external input

  I use a PXI-5154 and want to change my previous program to trigger the external source. I'm feeding the external source from source to V 2.5 and it seems to trigger fine. However when data acquisition the vertical range of the oscilloscope will 5 V which is too high as to my request I acquire in the millivolts range. I tried to show the vertical range of the channel I acquisition, but although I put it as the active channel I get the following error:

  Error 1074118616 has occurred to the property node (arg 1) in PD_measurements_v11_test.vi

  Get a base attribute value channel failed because the channels interviewed have different values.  Please specify a channel when you query a string based attribute.

  I enclose you a printsceen of the relevant part of the code.

  Kind regards

  Karavellas

  Dear Tunde

  I managed to make the changes you suggested and the works of the example. I'll look in my code and see what the problem is. I'll get back to you if it has been fixed in my code or not.

• Incompatibility of pilot PXI 5105 and unable to be detected by OR-SCOPE FPS with NO-SCOPE installed 14.1

  I am setting up test bench and just add a PXI-5105 card to my chassis SMU-1078.

  I currently have NO-SCOPE 14.1 installed on my PC host and target RT.

  When I try to run the Test panels in MAX, I get the following error:

  

  If I try to launch SFP-OR-Scope, it does not detect the card of the scope:

  

  The map seems to indicate as normal in my remote systems in MAX.

  For the host, the Installation of NOR-SCOPE includes:

  • Configuration support 14.1
  • 14.1 development support
  • 14.1.1 duration

  For the target RT, Installation of range OR watch as 14.1.0.

  I even checked in the feature add/software for the remote system see if a driver incompatibility was actually present:

  

  I have also confirmed in the Readme that PXI-5105 is supported OR-SCOPE 14.1.

  I'm kind of dead in the water on other ideas to investigate on concerning the system is behaving properly with the new card.  Other ways suggested for study?

  I continued to play with setting up more and find my VI has been targeted my Windows host instead of the goal of the RT.  I'm nowable to see my map of scope 5105 now through Labview + RTM.  Thank you for tolerating a newbie.

• How to identify a particular relay on a PXI-2532 module

  I have a defective relay on a map of PXI-2532 matrix. I don't know who it is, but I do not know how to identify on the map itself relay. I would like to replace it. Any information would be appreciated.

  With a few head scratches, it helped a lot. Thank you!

• The streaming of data in c (PXI-5421)

  Hello

  I do the data streaming in C by PXI-5421 follow this instruction: http://zone.ni.com/reference/en-XX/help/370524R-01/siggenhelp/streaming/

  Here's my psudo code:

  1 set the amount of memory shipped to use for streaming

  waveformSize = 1048576;

  short * CurData [16];

  checkErr (niFgen_init (resource, VI_TRUE, VI_TRUE, & vi))

  checkErr (niFgen_ConfigureChannels (vi, ChannelName)); ChannelName = '0'

  checkErr (niFgen_ConfigureOutputMode (vi, NIFGEN_VAL_OUTPUT_ARB));  //Arbitrary mode is used

  checkErr (niFgen_ConfigureSampleRate (vi, SampleRate));   Rate of sampling = 40e6;

  checkErr (niFgen_AllocateWaveform (vi, ChannelName, waveformSize, & wfmHandle));  Allocate memory for broadcast borad

  2. identify the waveform streaming

  checkErr (niFgen_SetAttributeViInt32 (ChannelName, NIFGEN_ATTR_STREAMING_WAVEFORM_HANDLE, vi, wfmHandle));

  checkErr (niFgen_SetAttributeViReal64 (vi, VI_NULL, NIFGEN_ATTR_STREAMING_WRITE_TIMEOUT, 10.0));  Set TimeOut = 10 s

  3. fill the waveform continuous initial data

  for (j = 0; j<>
  fread (CurData [j], sizeof (short), waveformSize/16, PlayedFile);  Read data from my saved file
  checkErr (niFgen_WriteBinary16Waveform (vi, ChannelName, wfmHandle, waveformSize/16, CurData [j]));
  }

  4 start generating the waveform

  checkErr (niFgen_ConfigureOutputEnabled (vi, ChannelName, VI_TRUE));
  checkErr (niFgen_InitiateGeneration (vi));

  5 write a waveform data block. (Optional) Monitor available memory that generates the waveform

  {}
  niFgen_GetAttributeViInt32 (vi, '0', NIFGEN_ATTR_STREAMING_SPACE_AVAILABLE_IN_WAVEFORM, & FreeSpace).

  {if(FreeSpace>=waveformSize/16)}
  fread (renewData, sizeof (short), waveformSize/16, PlayedFile);

  checkErr (niFgen_WriteBinary16Waveform (vi, '0', wfmHandle, waveformSize/4, PlayData));
  //}
  } while (1);

  I properly generate first 1048576 points of data. However, I'm stuck in writing new data in my space of memory onboard.

  The error message space in continuous waveform has not become available within the specific period, and appears after 10 sec which is my time-out period.

  If I check my available space via the property NIFGEN_ATTR_STREAMING_SPACE_AVAILABLE_IN_WAVEFORM, it never increases.  Did I miss something? Can I work in arbitrary mode for data streaming?

  Any suggestion is appreciated. Thank you!

  Looking at the example LabVIEW/CVI, it seems that you are on the right track.

  If you remove the Do / While loop, do you still 1114112 samples? In other words, samples of 1048576 (1048576/16)?

  What is the value returned by ' niFgen_GetAttributeViInt32 (vi, '0', NIFGEN_ATTR_STREAMING_SPACE_AVAILABLE_IN_WAVEFORM, & FreeSpace)? "

  I have attached the CVI example in this post. It has many additional functions that change the GUI of the CVI, but ANY function calls should be the same. Is the only thing that is considerably different that they set a number of rehearsals and use unique relaxation mode. I would go ahead and change your code to be similar in order to ensure that it is no hardware problems. Then I would try to generate and disseminate a sinusoid first before trying to use your file. I hope that we can refine all the problems.

  Jason L.

• Test Panel does not work with the PXI-6541/6542/6551 in PXI-1002

  Ripping my hair out trying to get the Test Panel can work with system as described below:

  1002-PXI chassis with controller PXI-8176.  In the three places available (from left to right) PXI-6551, PXI-6542 and PXI-6541.  They come in NIMAX, they self test, reset and to calibrate.  But when I try to open a Test Panel, I get an error as follows:

  nidmfpan.exe - Application error

  The application failed to initialize properly (0xc0000142). Click OK to close the application.

  I uninstalled, re-installed, modified and repaired everything NIDAQMX (15.0.1) 15.0 HSDIO, NI-VISA (15.0.1), etc.

  Original symptom is that when I pressed the button on the test Panel, nothing would happen.  Then, the next symptom is that MAX has said MFC90.dll (not found) and MSVCP90.dll (not found) and MSVCR90. DLL (not found).

  I can not find help topics or the forum messages that cover this.  Very annoying.

  Hi fully,

  Sorry to hear that!  Nidmfpan.exe is the process that opens MAX test panels and MFC90.dll is a Windows wrapper.  Combinations of driver reinstall or copy other MFC90.dll files in System32 are unlikely to solve the problem.

  You are on XP?  Try to navigate to C:\Windows\System32 and rename the nidmfpan.exe.manifest to nidmfpan.exe.manifest.back and after close/reopen MAX file and try to open a test Panel.  Is it effective?

  Note that the file you want to rename is nidmfpan.exe.manifest and NOT nidmfpan.exe.

  If not immediately successful, close and reopen the MAX and try the test panels a few times more.  If after several attempts it still does not work and the correct manifest file has been changed, it can point to a deeper problem of Windows that requires a reformatting of the OS.

  Really that's hope!

  P.S. you might get more visibility to a problem as it is in the sections "PXI" or "Digital i/o.  VXI and VME are not widely used these days, so this section of the forums is probably not too much traffic.