Water and plug headphones Xperia Z5

Similar Questions

• How to use HDMI and plug headphones at the same time?

  I'm running to a HDMI projector (via a HDMI-DVI adapter) for video and Composite (red & white RCA) using the socket for headphones and a splitter cable to a receiver of older Theater-in-a-box type for audio. But when I plug the HDMI, the headset turns off - no sound. I've seen people describe the ways to solve this problem for older versions of Windows, but I have Windows 8 and I'm unable to find. Thank you

  Michel,

  Apparently, it is not possible to output sound via the HDMI and the headphone jack at the same time.  But if you want to watch the video via HDMI and listen via the headset follow these steps:
  Right click on the speaker icon in the task bar > left, click playback devices > right-click on HDMI > disable.
  It works for me.
  Rusty

• MacBook Pro sound stops once the connection when plugged headphones

  On my MacBook Pro, when I connected my jack 3.5 mm (headphones or speakers) and I switched off, the sound stops once I have connection, once again. The speaker icon is gray and I have to remove and reinsert the connector to get her back. Can you help me, please? Thank you.

  Check your settings in the Audio Midi application located in the Utilities folder.

  http://support.Apple.com/kb/TS1574 Troubleshooting for any audio speakers on Macs

  
  

  Trick/Tip: Open GarageBand if installed then, open a program (optional).

  Quit out of the app from GarageBand.

  =====================

  Repair Mac mysteriously mute

  The background on the issue, is that there is a switch small sensor inside the plug headphones. When you insert a headphone jack, the sensor includes what is what and changes the setting of audio output for headphones. If you insert a jack for digital audio output, the unit switches to digital output. When you completely remove the plug, it should read the internal speakers.

  The spirits tell me that there is a very good chance that you recently had something hostage in this port, a set of headphones or a cable leading to powered speakers, for example. When you remove the plug, something in the port have prevented triggering sensor properly. That's why you see Digital Out instead of the internal speakers.

  The solution is to force the sensor to do its job. The safest way to do this is to simply run a plug in and out of the port, a few times. A large part of the time, this takes care of the problem by triggering sensor correctly. If this does not work, there may be dirt in the port. Before moving on to more invasive techniques, get a can of compressed air, plug the small tube which corresponds to the nozzle and the breath to air a few shots in the lane. With a little luck, should dislodge dirt and the port will operate as it should.

  If this does not work, find a swab to foam tip that fits (electronics stores generally carry), dip it in rubbing alcohol and insert gently into the helmet in an attempt to wipe any tenacious dirt. I recommend foam rather than cotton fleece because the variety of cotton could leave the son behind. (This same technique works well with the bad conduct of ports from headphone output on devices such as iOS devices).

  It is possible that dirt has nothing to do with it. On the contrary, it may be that the switch should just a subtle help. If a socket or a buffer does not work, I have heard people resetting successfully with a deft poke with a toothpick.

  http://www.Macworld.com/article/2031146/repairing-the-mysteriously-muted-Mac.htm l

  

• I was on YouTube with my helmet and then I unplugged the and plugged them back and now I don't got no noise at all.

  I was online on you tube with my headphones and then I unplugged the and plugged them back and now I had no noise at all, what can I do? I checked the audio Manager and it seems fine.

  Hello

  (1) you use Internet Explorer or another browser to go online?

  (2) this happens on all websites and pages?

  (3) other sounds work fine on the computer?

  (4) may I know the operating system you are using?

  (5) were there any changes before the show?

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1: No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:

  Check the playback settings to see if the device is turned off / disconnected.

  Method 3: If you are using Internet Explorer, check if this option is enabled.

  a. Click Start, type "inetcpl.cpl" and press to enter.

  b. click on the Advanced tab.

  c. scroll down to see the multimedia section and make sure that "play sounds in Web pages" option is selected.

  d. click ok to apply the changes and see if the problem still occurs.

  Restart Internet Explorer and check if you can hear the noise.

  You can also try to update flash player on your computer and check if the problem is resolved.

  For more information, see the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  I hope the information is useful!

• Alienware M17xR4 speakers and the headphones does not

  Hello

  Once I plugged headphones Apple (like those that come with iPhones) on the plug headset no longer works. Even after that I reconnected the headphones into the Jack, the headphones or the speakers do not work. I tried different headphones as well, but they don't always work.

  When I went in the sound control panel (windows 7) I see the "speakers" and "digital output" of Sound Blaster Recon3di. When I try to play some sounds he plays through the 'digital output' and not the speakers. I also tried to disable the 'digital output' but it does not always play through the speakers, and only through the "digital output". The speakers are set to the default device.

  Help, please

  I am the owner of this laptop (M17x R4) and learned that there was some defect fundamental with the motherboard drivers and bios / Setup.

  I had my motherboard and charge cable and speakers replaced several times now with Dell and the problem comes back.

  Either the sound does not work (speakers / headphones etc.) or the cable from the charger (AC adapter) is not recognized as a valid cable and thus is will not charge the laptop.

  I wanted to share something that works 100% of the time for me now to solve this problem. Unfortunately, I consider that this defective equipment by Dell, but they do not recognize this.

  Keep the drivers card mother Bios A12 handy that Dell has for download on this model. At any time, this problem occurs, reinstall the drivers from the A12. When the computer reboots, the problem disappeared... at least for a while.  Give it a few days or a few weeks, but he'll be back.  When this is the case, re - install the A12 drivers... problems go back... temporarily.

  Something is corrupting the drivers or the MOBO config or something...

  Just re-installed A12 because there on the 15th time and boop, my speakers again, works as expected. This laptop price shouldn't have these horrible problems.

  I really hope that Dell realizes that inaction in the face of this root cause of the problem, will result in the loss of brand loyalty to their customers.

• When I power on my iPhone and plug in the charger it turns on, is this normal?

  When I power on my iPhone and plug in the charger it turns on, is this normal?

  Yes, it's normal.

  If the battery power goes off and you recharge it will reboot the phone for you when it reached a stable level so that you can get phones without hovering above the device to see if it is ready.

• I dropped my phone in the water and now he has red lines?

  I got out of the car and my phone fell and was placed on the concrete and then slid into the gutter where there was running water. I put it in the rice as soon as I got home and it was there for about 14 hours. I also put in charge while he was in the rice. It turned on for awhile, but now whenever I have try and turn it on a big red line appears in the middle of the screen with the little ones on each side and a bruise on the left side. Is the red and blue lines because I dropped it on concrete or because there is water in it.

  Thank you

  Make an appointment on the Apple store nearest to have rated free iPhone.

  Once the diagnosis is made, staff will explain your options.

  Make a Genius Bar reservation

  http://www.Apple.com/retail/Geniusbar/

  Water and electronics don't mix well. Charge the iPhone all wet most likely damaged

  some of the internal components.

• Firefox is faster on the safe mode. Even when I disable all extensions and plug-ins, it does still work on normal mode. What should I do?

  I already tried to uninstall e install again, but rest the problema. When I use safe mode, firefox works correctly. I tried to remove all extensions and plug-ins, but the problem persists. Even my mouse pointer moves slowly around firefox screen when the normal mode. I have synced with another computer and I have no problem with each other.

  Hello lgm11, try turning off hardware acceleration and check again (in safe mode hardware, acceleration is disable).

  Thank you

• FireFox crashes on a regular basis with 100% of the CPU. All the Add-ons and plug-ins disabled.

  FireFox hangs on me regularly with 100% CPU usage. I have add all and disabled plugin. In safe mode I don't have the problem. Don't know what to do next because I have disabled all add-ons and plug-ins.

  OK I fixed that by disabling 'Use hardware acceleration when available' in the 'Advanced' Options I had to restart FireFox for the changes to take effect.

• My 5s droped in water and does not

  I had droped my 5s in water and 5s does not work. It opens the apple logo sometimes happen but when it comes it freezes. What can I do now? (Sorry for my bad grammar ^ ^)

  Unfortunately, the iPhone is not waterproof. You're lucky if it still works after contact with water. Usually, phones and water do not mix, and water damage are not covered by the warranty. Corrosion has already begun.  You must schedule an appointment of genius at the Apple Store to evaluate the level of damages. They will offer you the best solution.

• Satellite P205-S6277: can I remove the battery and plug the too?

  I'm working on my laptop Toshiba satellite P205-S6277, 80% of my time at home.

  Can I remove the battery and plug the power to a UPS backup system in order to make the longer battery life?
  I can load once a week.

  Of course you can do it. You can remove the battery and work on the power current only. Remember, there is no dust on the desktop and the location of the battery in the notebook of stay clean to be used again.

  Good bye

• How can I remove the large green battery and plug icon?

  How can I remove the large green battery and plug icon? It seems pretty ugly and useless. There is already an icon of battery-plus-card used to determine the level of battery and charging status...

  Moderator edit: matched subject to content.

  Hi thang_nguyen!

  Another alternative is to double-click the battery icon and when Power Manager opens, click on Advanced Options > Options and uncheck the box "see the gauge of Power Manager in the bar then apply stains.

  To access the Lenovo Power Manager when the gauge of Power Manager is disabled, right-click on the Windows icon / energy from the battery in the bar of tasks and you should see "Power Manager".

  I hope this helps!

• USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  Hi ahmedman_10,

  ·         You follow the steps in the article of my previous answer?

  Follow these steps in my previous answer and at the same time this article, follow these methods.

  Method 1: Follow the steps in the article.

  USB port may stop working after you remove or insert a USB device

  Method 2: Update the latest drivers for chipset.

  How to manage devices in Windows XP

  For reference:

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

• If I use my network key and plug it on my slim xbox360 xbox live wil I get

  If I use my network key and taken in my xbox360 slim wil I get xbox live... I want to make a network on a USB flash drive and plugging dirrectly to my Xbox 360 slim usb port and and get live xbox can I do and is so, how do I do I already know how to do a network on a flash drive I just need info on the end of the xbox of my? Please please please help help help... and if it is not possible to s what are other sollutions I can use I already pay for im internet does not seek to get the hot spot and pay for internet 2 times I just want to be able to takr my anywhare xbox and use my internet without having to worry to connect to xbox live and also are thare any kind of hubs of wifi router, I can use HELP HELP HELP...

  http://forums.Xbox.com/ is where you should be asking.

• Z3 and double z3 xperia Xperia

  Hello everyone, just wanted to ask two questions:
  1. What is the difference between the xperia z3 and double z3 xperia?
  2. I want to buy the xperia z3, and I want to read some personal comments from you guys on the phone. It is worth the money? All bugs?

  I can answer the first question, the major difference is that the double version supports two SIM cards.