Water resistant / headphone jack

Hey,.

Got my Z2 yesterday, and so far here it goes great. Not had the chance to test the video and even sound.

Re the waterproof function water - I have no coverage on the headphone - should there be a?

Thank you

Its okay, there is none. Decision-making itself is waterproof to the water.

Tags: Sony Phones

Similar Questions

  • The Sansa View headphone jack repair

    How to fix a headphone jack for listening to Sansa View problem

    I bought a refurbished Sansa View 8 GB a while back for $60 at a hypermarket on the local computer and
    It came with a political guarantee of 60 days and 30 days of return of the store.  I liked the view better
    only the rocket and the Clip, they had for similar prices because of the larger screen.  At the time I'm not
    know that Sandisk has been gradually the support of support for new players, or about the
    others have had to problems.
    On the second day, I had the player, I noticed that the headphones were not playing both
    channels correctly, and if I shook the card he got much louder.  I could the deal and he would play
    good for awhile and then a channel would cut out randomly.  After some research, I found that
    others have had the same problem.  I tried to return it, but somehow, I had lost the hardback cover
    that describes the product and contains the chisel, and they could not return.  They would have
    I would like to swap with someone else and his sleeves to return the original unit, but they sold the
    them and never got over.  I think I was about $ 60 at that time here, so I went
    back line for further research.  I found a guy on this forum who had disassembled one, therefore, using
    his instructions (with some modifications), I took mine hand, found the bad soldering and fixed
    them.  Here's how:

    1. use a PIN or sharp knife to release the tiny connector black rubber that covers the screw
    It must be removed to open the case; It is located to the right of the usb plug (ahead of)
    Reader).  Put the CAP and the screws that you remove so later in a small Tupperware
    you do not lose them.
    2. remove the screw, with a very small phillips head of a glasses or a good game repair kit
    precision screwdrivers.
    3. the bottom right corner should now be free; Remove the plastic cover of metal
    Basic it and work slowly around the case counterclockwise, separating the nail of the thumb
    If you're going to.  You may need to use a tiny flat head to press the strips in transparent plastic
    which become visible when you move along the line of separation.  Take your time in order to not break
    no label.  Finally you get to the last tab in the lower left corner of the headphone jack.
    This is where I had my only problem.  Other blogs say to lift a lever to more
    release this tab; I found that nothing seemed to free him and after several minutes of
    soft eyes I broke something and it came loose.  I think it was super-colle in place!
    4. I didn't take away the little water that connects the encoder in the Council, because it is very
    difficult to re - install these things, so just press the cover of how to get to the screen and
    Live PC.  There are 2 tiny black screws holding the display remove them and
    equivalent it loose, leaving the attached ribbon cable again
    5. now you can see the battery; out of its niche and disconnect the 3 tiny dumb son.
    Nector and set it aside.
    6. push the lid, so you can see the 3 tiny black screws holding circuit board printed; delete
    them (the last is difficult to see, it's in the corner to the right of the headphone jack).  Equivalent
    the Platinum (the cursor for the power switch appears immediately switch).  You should now be
    looking at the empty metal casing and the display, printed circuit board and a plastic cover should
    all be loose, but still connected by two ribbon cables.  In the Tupperware you
    should have 1 small black cap, 1 small silver screw, 5 small black screws, the slider switch.
    and the battery.
    7. I now inspect the plug welds helmet, and it was very obvious that 2 of
    the legs were loose, probably because of not enough solder on them.  I warmed up a little
    flat-head screwdriver precision with a mini torch and has used and very fine electronics
    welding to weld safely.  After a thorough inspection of the other joints, I decided to leave
    alone because they looked OK.
    8. I now plugged the battery and booted up the test before I re-assembled.  Both
    channels played now, but I've always heard some static when you turn the CAP.  I have fig-
    measured, it was normal in my experience with small electronic devices, so I assembled the player
    and more broadly, tried using headphones and a cable to connect to my receiver.  He
    now worked better, but still had some problems with making good contact.  Now at least I can
    He lay and he will play both channels indefinitely.  I think that the problem is related to the
    bad quality of decision-making.
    9. I'm going to use it at work for a while with my powered speaker system and see how it
    works.  In the future I will try to clean the plug with the electronic device, and if that does not work
    help can I go back in and try a few welding more or contacts inside making bending.
    Worst case I might have to find a plug of new, high quality and weld them, hoping that I don't fry
    whatever it is the heat.

    So repair all taken only an hour (excluding research).  I now have the confidence to
    Difficulty everything that can go wrong in the future.  I could swap the battery in 10 minutes and I
    hear they are only about $20, so I could keep this thing going for years.  I went from $ 60
    brick for a machine that could last a long time.  I wouldn't buy a Sansa View,.
    But if you have already, I sincerely hope that this information will help to...

    It's my last update to my problem of current headphones.  The view is now fixed; Although having a few changes

    appearance.  It now sports an inch and one-quarter long cast taken helmet hanging out where the taking of origin to reside.  You can laugh now, but not for too long, because this thing is perfect now!  The repair is also robust enough to

    Use it as a portable device (carry in your pocket or other) without worrying too ripped loose.

    Here's how I did it:

    After disassembly, I unsolder the old jack, carefully lift one corner at a time, until all 6 solder joints were loose.  The

    2 front and 2 rear tabs are on enveloping metal clips which can be removed separately.  The old jack appears just out of it

    slot in the jury.  Earlier, I bought an extension of 3.5 mm headset (with volume control, $8.99, p/n 4202559) from Radio Shack, just because it was the smallest molded into the store.  They had one for $2.49, what was right, but it was twice as big, so I spent the extra bucks because he must fit into the original hole.  I now have it cut and stripped the wires, leaving only an inch of thread on the new socket.  Then I soldered the 3 wires in their appropriate places, as

    as a result;  looking at the top of the Board, with the power switch facing you, you have 6 contacts arranged like this.

    : the 2 middle are positive of left and right, top left (ground) common to both channels. The others are only to secure the plug to the Board of Directors.   After brazing firmly the son I just put all together. the ribs on the molded strain relief perfectly nested within the original hole in the case, then it will not easily get out but retains some flexibility.  The only problem I see is that the case is not quite keep hanging down in that corner more, but that could easily be corrected by a small drop of super glue.  I'll do it later if it seems that the case is in danger of seperating

    or if the wire pulls.  I have also considered the fill area with hot melt glue, but who could do a more difficult future repair.  I think that super glue will be the best and is still to open again if you only use a microdot of glue.

    So after all this pain and suffering, I finally a player, maybe I can use for years to come.  Total cost:

    Given to nine Sansa View 8 GB... $60.00

    RadioShack 3.5 mm ext. p/n 4202559... $9.00

    Duracell Micro SD card 8GB... $20.00

    Total .........................................................................$89.00

    Of course, I could buy a 16 brand new notice of GB for that price, with one year warranty!  Well, NOW you can laugh,

    as long as you want!  But wait a minute, I would have just the same problem with a new, a week or a month

    After the purchase?  Then I could send it to Sandisk for RMA and after paying for delivery, and in the meantime maybe a month to get him back, I would have another new view to manhandle.  So a year later, after the replacement of my 3rd or 4th, the guarantee was due to expire, and I do repair above on it to make it work, having had the use of the thing for only 6 months of the first year, what with shipment will remind it so many times!  So maybe my path is correct. at least I use throughout the day now, and I'll NEVER have to send anywhere.

    The moral of this story is: don't out cheap if you want a decent PMP - spend $150-200 for a Samsung P3 or a

    Cowon S3; both have video and excellent sound and can read files DivX 800 x 600 without conversion, have tactile and menus screens customizable, not to mention the bigger screens.  If you just need to play music, there are a myriad

    players good markets that are simple and almost indestructible and if you lose or break will be a much less expensive than lesson

    that I've learned.

  • the iPad headphone jack fault

    HI, I own an iPad iPad 4 mini and an iPad2

    There is a week iPad headphone plug 4 went in one channel and was sent for repair.

    last night, taken to mini helmet iPad went extremely crunchy before a few hours later the iPad died completely.

    Headphone Jack even night iPad 2 does not recognize a put jack in and goes to the headset mode.

    I like to use iPads for Djaying but cant help thinking that the helmet in all iPads is lower

    advise please because I can not continue to pay for repairs and lose the job because of this problem.

    Thanks in advance

    You can try to check the ports for any debris as well as the verification of the other end of your equipment. It is rare that the iPads fail together so by chance in order to check the other end of this cable.

  • Portege R100 - defective headphone jack

    Headphone 3.5 mm on my R100 hole seems to be defective (I tried it with another helmet and with them the sound is distorted unless I managed to get the plug in the right position).

    I will provide Toshiba on this subject shortly, but I was just wondering if anyone could tell me if this component replacement is a simple procedure?

    Thank you very much.

    Hi Dan,.

    The headphone jack is a pretty basic device that can usually be bought quite cheaply from most electrical spare outlets. The real problem is to find a repairman that will repair to the component level. Nowadays, the trend is to replace a whole PCB rather than simply weld on a new component.

    According your description of the problem as it sounds as if we spring metal tags is either loose or bent and therefore does not sufficiently wityh contact the helmet when it is inserted.

    If your laptop is still under warranty, then it should be replaced at no charge.

    If your warranty has expired, it may be useful to check for repairers of local PC that quote ' component-level) repair services.

    Good luck

  • Headphone jack to desktop computer HP Envy does not

    Whenever I plug a headphone into the socket headphones on top of my desktop HP Envy computer the computer will not recognize that anythings were connected. I looked at setting sound and all that value by default, but nothing shows that the headphones are connected. Yes they are plugged in all the way and the headset works with other devices.

    Computer model: http://www.shopping.hp.com/en_US/home-office/-/products/Desktops/HP-ENVY/E9G99AV?HP-ENVY-700-210xt-D...

    Hello Vesrox,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more. I understand that the headphone jack on the top of your computer is not recognizing what is connected, and I'd be happy to help you! To start, I have to ask you a few questions:

    • What is product and model number from your desktop?
    • What version of Windows you have installed on your computer?
    • Are you able to produce sound from the headphone jack on the back of the computer?
    • Has your computer finished all his important updates from Windows?
    • Have you updated your drivers from HP the HP SupportWizard?
    • Is this a recent or current program?
    • You are able to recognize USB devices on top of your computer, where the plug headphones on it?

    In the meantime, I recommend that you follow this document on the no sound on speakers (Windows 8). This should help to produce a sound of the headphonejack on the top of your desktop.

    Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

    Concerning

  • 23 - r110: speakers connected to the headphone jack

    Powered with subwoofer speakers can be connected to the headphone jack? Computer has no audio output. HP said yes but did not sound very sure. Thank you

    Thank you. I have two speakers with a subwoofer that is powered.  So you say, he should be allowed to connect these speakers

  • Designjet T610: 24 "waterproof or water-resistant paper roll

    Does anyone know if waterproof or water resistant paper is sold in rolls 24 "wide with a 2" base for my Designjet plotter?  Had no luck finding one.  I just bought this used tracer.

    Thank you

    Check the following two on Ebay & around $60 with shipping.

    Premium Glossy Photo Paper Roll inkjet canon hp epson photo RC

    I also tried the photo paper glossy HP pigment daily & water launched on it. Pass.

    After printing, wait longer and better.

  • Can satellite 2410-504 - I replace headphone jack card?

    Hey

    Stupidly, I hit my laptop when I had headphones plugged in and broke something.
    Now my laptop think headphones are permanently connected and won't play sounds through the built-in speakers.
    I tried searching the Web to find a replacement headphone jack card, but still I had no chance.

    Anyone know wehre I can get one?

    your

    > I tried searching the Web to find a replacement headphone jack card, but still I had no chance.
    You want to replace the headphone jack online?
    I doubt that you will be able to do this because something like that does not exist.
    Microphone and headset is part of the motherboard, and if something was wrong with the ports/Sockets then in most cases you will need to replace the motherboard.

  • Helps the headphone jack!

    Welcome.

    So about 4-5 months ago, I bought a brand new HP Pavilion PC g6.
    A few months later (2-3) I started to have problems with the sound. Whenever I plugged the headphones, the sound would not come to her. First of all, I thought it was the helmet that I was using. It turns out that it wasn't. Then I thought it was something with audio players or anything else. (Control Panel-> hardware and sound-> manage audio devices). It turns out that it wasn't.

    The problem started as my helmet is sound but cut wide in some places. I have to play with the headphone jack and move it a bit to get the sound. At that time, portable headphone plug was already loose. Then, for about 5-10 minutes, something really strange happened. His was no more. I couldn't not all the sounds if it was for my headphones or speakers of my laptop.

    After about 10 minutes, the sound is back after a reboot. However, the sound was weird and glitch. I mean, is that whenever I plug in the headphones, 55% of the sound would come through them, but the other 45% would come out of my laptop speakerks.
    Yet once again, I thought it was the helmet, but no. Even with multiple changes of helmet and try them on different computers, the headphones were great. I started thinking that it was the helmet being loose which caused all these problems. I started to look for solutions. I came across a post of aid for the same issue: being loose headphone jack.
    Most of them said that if the helmet was not directly related to the motherboard, that the issue would be fixed easly.

    My question is:
    (1) how will I know if the headset is connected to the motherboard directly?
    (2) how can I fix the problem if;
    (a) it is directly connected.

    (b) if it is not connected to it directly.
    (3) the headphone plug is loose have EVERYTHING link to my sound works does not correctly.

    Thank you and more information will be provided on request.

    Additional information: I know that HP laptop computers have a 1 year warranty, however, how do I check for mine?

    Hi kamel.

    1. with the hardware problems, it is best to contact support for your options before going inside the laptop.

    2. If you notice that you are not covered by your phones warranty, if you provide me with your laptop model number, I'll see if there is a maintenance and service guide. (another workaround of the guarantee is to get a USB headset connected)

    < How can I find my laptop model number >: http://support.hp.com/us-en/document/c00033108

    3. Yes, he seems to have everything to do with the question.



    Check your warranty:

    http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us & LC = in



    HP technical support: 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

  • Headphone Jack does not not on Satellite A215 S7416

    Im having a problem with my headphone jack, it does not work with everything and when I plug something in it, it does not work and always comes out the speakers. When I go into screen material add nothing happens with something lack or anything like that. Do I need a driver any?

    You have reinstalled the Sound Driver?

    Maybe the headphone jack is damaged.

  • Satellite Pro A200-PSAE4E: Headphone Jack does not work

    I use this computer to my work as a dj. and I use one called audio8djdriver (http://www.native-instruments.com/index.php?id=audio8dj&ftu=25a739a1c5cd54c) external sound card and I used it with a program called traktor (http://www.native-instruments.com/index.php?id=traktor3_us) and use usb sound card.

    Here I put in the links of the product if you n t know what it is...

    And when I m at home I n t use this external sound card.
    I just used the release of the phone forward as a line out put...

    But suddenly sound only coming sound speaker that is built into the computer.
    I tried to reinstall the audio drivers but no success

    It seems that he doesn t know I have something out of the phone or microphone. And I even tried to upgrade the Bios.
    It may have something to do with the upgrade of the Microsoft Vista?

    Hello

    Have you tried plugging a headset to the headset jack to see if it would work?

    This external sound card is not only known to me and I ve no experience with this device, but using the helmet you could check if this problem is related to the headphone jack or another part.

    On the other hand if you use Win XP then you can check the settings in device-> Realtek HD audio Manager manager.
    There is a tab called Audio i/o.

    Plug in headphones and see if they would be activated it.

    Concerning

  • You can use a headphone jack as a Mic In on iPhone

    Hello!

    You can use a headphone jack as a Mic In on iPhone? I need an external MIC for video production...

    Thank you!

    N ° however, headphones with microphone and the proper plug on the headphones provided with it, then you can use this microphone. You might associate your own plug, taking care to use tape appropriate to connect the microphone during the deactivation of one for the headphones. Don't forget the microphone you are using matches the impedance of the microphone of the device.

  • Headphone Jack HP DV6-6000 series

    Hi, I would ask... HP DV6-6000 has 2 ports of helmet catch... One of them is a SPDIF port?

    It's the manual.

    There is no S/PDIF out there are two headphone jacks.

  • HP Pavilion 15 laptop: Headphone Jack works sometimes?

    My headphone works sometimes only. I'll get my wired headset and I can hear everything perfectly clear, but if I leave the laptop on overnight or leave for 30 minutes, I hear nothing more.

    I checked to make sure that the headphone jack is the audio device by default and the earphone works perfectly fine, so I don't see what the problem.

    The only way to solve the problem, as far as I understand, is to just restart the phone whenever the problem occurs, and it works. But I'd rather not have to restart every time this problem occurs. I also do not have to send the laptop.

    @polarpower,

    Hello and thanks for the display on the HP support forums.  There are only two things that can cause for your problem of making head phone.  When the system goes and warms the chips that handle the audio channel enter a blocking state as soon as this happens her loose.  As soon as you restart the voltage on the chips are erased and will work very well until things warm up again and the right signal is applied to this chip to block again.

    You can try to backup all your data and perform a recovery of the system so that tha system goes back to its original configuration.  It will be deleted including updates which could have caused this.

    Even though this is listed as Windows 8 you can use for Windows 10.

    HP computers - performing a recovery of HP (Windows 8) system

    Failure to resolve the issue, you will need to send in for repair.  Use the following link to help you contact the appropriate HP support department.

    Contact HP support.

    Please let me know how things are going with this.  Thanks again for posting and have a great day.

  • Headphone Jack does not work properly.

    Why is there no sound in my headset any headphones? Even if my laptop told me that you have plugged just a new device in the headphone jack?

    Hello

     
    You are able to hear the sound from the speakers with no problems?
     
    Method 1:
    You can try the following steps:
     
    Close all programs
    Right click on the Volume icon in the system tray
    Select the playback device.
    Some phones head as default device.
     
    NOTE: If the head phones are not displayed, you will need to select the option to view the disabled devices and disconnected devices and select head phones from the list, and set its default value.
     
    Method 2:
    Check out the link and follow the steps.

Maybe you are looking for