Watermark after the bios update.

Similar Questions

• Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

  I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

  But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

  Can someone please help.

  Hello

  Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

  What code you get BSOD?

  After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

• Satellite A500-138 60 fps instead of 99 fps after the BIOS update.

  Hello!

  Before I have a little problem with my fan, but I do it with the BIOS update. His work!

  Now, I have a little problem of different...
  I am a player of counter-strike and before the BIOS update I have 99.9 FPS now, I have about 60... Who is wrong?

  Its make me crazy...

  Hello

  Seems the CPU and GPU don t run full implementation after the BIOS update.
  Any performance CPU/GPU leads to lower the heat dissipation and this means that the cooling module does not need to execute quickly and very often.

  Check to see if you can change an option is the BIOS.
  You can also try to update a graphics driver and could control Windows 7 power management.
  Power management settings 7 victory could affect CPU and GPU performance to save battery power and reduce the heat dissipation.

• Satellite P200 - after the BIOS update I can't start the machine

  After the BIOS update I can't boot the laptop because the system doesn't recognize the relecommunicarions password.

  Before updating the password is 0000.
  After when I try to set the password incorrect password start apeeras

  The BIOS password can only be removed from an authorized service provider. So I think that there is no other way.

  On the Toshiba site, you can search the nearest:
  http://EU.computers.Toshiba-Europe.com

• Satellite A300 - after the BIOS update I can not install two OS

  Hello everyone:

  I bought a laptop Toshiba Satellite A300-247 with Windows Vista Home Premium.

  Then I formatted it and divided the hard (320 GB) into 6 partitions and installed Windows Vista and Windows XP on drive C to drive D after having changed the SATA controller mode in the BIOS for compatibility. The computer worked well with 2 operating systems. However, when I updated the BIOS to version 1.9, two operating systems stop working and one of them can be installed: XP can be installed when SATA controller mode is placed on compatibility and Vista can be installed only when the SATA is changed to AHCI.

  Is there is no explanation of what past? And can I install operating systems 2 together again?

  Thank you

  Hello

  First of all, I doubt that this has something to do with the BIOS update. I think that after the BIOS update HARD drive mode has been changed from AHCI to compatibility and therefore the OS didn't start.

  Anyway, in compatibility mode you can install Vista and XP without the SATA drivers. This should t be a problem.

  But do you know the difference between compatibility and AHCI? AHCI mode is faster and therefore I would recommend this mode.
  Like you said Vista you can already install in AHCI mode and for XP, you need Intel Storage Manager. This package includes the SATA drivers you need and here is a step by step guide to use these drivers:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Last but not least, you can install 2 OS. You can do what you want! ;)

• Tecra 8000 does not start after the BIOS update

  From one day to the other does not start my Tecra 8000 (400 MHz/256 MB BIOS 9.30 for years). After start-up, the disc starts to turn, but the screen including the backlight remains completely black, without red logo TOSHIBA BIOS is not accessible.

  I got a new mainboard on stock, so I replaced it, and it worked. Unfortunately now my WLAN card now did not work properly. I tried several settings of the BIOS with no results, so I decided to do an update of the BIOS from 7.50 to 9: 30. After the upgrade, I get the message "ROM WRITE successful, utility completed. LEADER BIOS: Tecra8000 v 9,30 ". Because what either kept silent, I pressed the power button to restart and heard a long and many short beeps (endless). I could interrupt what pressing the powerbutton for 5s.

  After turning on again I have the same problem as described in the first line :-( I can't get into the BIOS, but I can again update (with pressed F12). Once again these beeps.

  What to do with these beeps after average BIOS update? I replaced the MoBo connector LED with pension. Processor, memory, keyboard and HD has remained the same. So, before I start disassembling the machine, please notify, your help is very appreciated.

  Hello Joachim

  I'm not a technician and don t know what the beeps but I am afraid that the BIOS chip is damaged. Because of this, the unit is completely dead. Sorry, but I really don t believe you can do anything. Maybe the new motherboard again :(

• Satellite L350 - does not start after the BIOS update

  Hello

  I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

  Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

  The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

  Any help would be greatly appreciated.

  Thank you

  Andy

  Hi Andy,.

  Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

  So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• Satellite Pro L300 - which improved after the BIOS update

  Hello users,.

  I just finished an update of the BIOS on Satellite Pro L300 using Updater Insyde Bios. I tried the Toshiba site to see what's new or what has improved since the update my bios 1.7version v2.2. But there is no search results. I also went to the site Web Insyde, but neither have they put up what has changed or improved?

  Is there a documentation or information which could help me to know how my laptop has improved or better after the update of the BIOS and what has changed since my update of the BIOS?

  Thank you

  Hello

  I assume you mean a changelog of the BIOS. Well, normally this document is placed on the Toshiba page where you can download the BIOS update.

  If you can't find such a t changelog, there is no available changelog. All that s!

  In addition the BIOS update should be performed only if it of really necessary. This means that if everything works fine, I don't see a reason to update because this update is a bit risky.

• Z50-75, does not start after the bios update

  Hi all!

  I just baught Z50-75 with AMD FX7500, 8 GB of Ram and FreeDOS. I installed Windows Pro 8.1 and they shot a few drivers during the installation and I went to the view of Lenovo and downloaded all the rest (graphics, camera, etc.), after each installation the computer restarted normally and everything was OK The latest drivers I've seen on the site were originally from the BIOS and I downloaded those to and he started the installation, after which he said: "the system will now restart for the changes to take effect" and he did, but it wouldn't start after he did that show me this on the screen:

  And I tried both options (either with the Windows CD inside), but it just stays where it is, no effect.

  I can enter the bios and change the settings, but none of them seem to work because that's the maximum where it will go, the only difference is when I change from AHCI to compatibility mode, it restarts and I get a white screen, I have to use a button recovery to return to the image above...

  I appriciate any help kond, please give me some advice.

  Thanks for the reply!

  I solved the problem after updating the bios, communication between it and the disk hard drive had a few problems and is causing the boot problem. I solved with out the hard drive and install on another laptop, flashed the windows and installed the hard back in my Lenovo, and that worked.

  You tell the truth, I don't really know how it was the solution, but it worked, I guess that Flash just windows helped the hard disk to create the new connection to the bios, that the first was simply corrupted by an error during the update of the bios...

  Now, I know that the bios update is the last solution I'll never use, and of course, save all peace of data I had on the hard drive if possible.

• HP Envy 15 Touchsmart does not start after the bios update

  I had one laptop touchsmart from HP Envy 15 (initially Windows 8, windows 8.1 now) for about 2 months now and have not had any problems, until a few hours ago I tried to update the bios of my laptop with the hp support assistant. After the reboot, the pc is more would start up and took me to a blue screen with the error SYSTEM_THREAD_EXCEPTION_NOT_HANDLED. Everything that I've done short far from a refreshment or a reset has not worked and if I could I would avoid both that I don't have the bandwidth to download windows 8.1 again.

  HI Calsius:

  Thank you for your query.  I will be happy to help in any way I can!

  After the Windows 8.1 update, did you create a restore point?  If so, you can use to restore from that date and not lose your 8.1 updated.  Some BIOS have an option for a restoration which should not affect your operating system.  I did a search of Microsoft and found this answer click here.   Here is a document on the ' update the BIOS'   click here.»  You did not provide your model number and the HP Envy 15, is a series, so I couldn't get a specific documentation for your computer.  Here is a document on ' computer will start (Windows 8) " click here. If you are able to get your computer running and upward I update all the driversand then create a restore point to return if necessary.  If the Bios update should fail a 2nd time, your restore point will take back you to just before you retried the update. If you were to use the recovery option you need go back to Windows 8, or back to the factory.

  Please let me know if this helped.

• HP DV7-7259nr does not start after the BIOS update

  Hello

  I have a problem with my HP DV7-7259nr laptop, WIN8 running: it does not start after tune recommended to update BIOS and drivers.

  It downloaded all the drivers and started installing at one time, he asked for a reboot, click OK and the BIOS update has begun to load. The process ended successfully and after the reboot that my laptop wouldn't start; everything is black and the cooler is runing.

  I tried:

  -battery disconnected and power - button Power - plugged power again-> NOTHING

  -Windows key + B + Power button--> nothing

  Please help as this is the laptop I use daily in my work.

  Thank you

  If you install the electro mechanical original hard drive in it starts?

  If it has been delivered with a SSD?

  The specifications indicate that an electromechanical drive was part of the specification.

  

  This is where lies the UEFI environment. It is actually on the hard drive.

• Satellite L855 does not start after the BIOS update

  I downloaded the BIOS update and followed the instructions there during the installation, but on reboot (including the requested configuration), I get a blank screen. Intermittently, the CPU fan starts and stops. I think that the BIOS update failed, how to solve this problem?

  Thank you
  Neil.

  Hello, Neil

  In General when the BIOS is screwed up you need professional help and you should contact the nearest Toshiba service provider and ask for help.

  See also this thread. Perhaps this methid can help you too.

• Satellite L300D - does not load after the BIOS update

  I had to update my bios & it seems that that wrong has been downloaded about 3% by installing the laptop just die and not to revert to.

  There is no lights & there is no noise from the laptop at all.

  Can any ideas on how I fix?

  The laptop is a Toshiba Satellite L300D

  Hello

  Well, if the BIOS update crashed you can do anything because the ROM module needs to be reflashed. This is possible only with special tools and only an authorized service provider has such tools.

  Then please contact the nearest service Toshiba and ask for help :)

• Satellite A500 - it gets stuck one second after the BIOS update

  I knew I shouldn't update BIOS unless I have problems. A message came Toshiba Bulletin Board and I was stupid enough to trust him and I have updated my BIOS. The update has been successful, my computer seems to work very well.

  Except, now when I try to watch a movie, I downloaded every 10 seconds or if it gets stuck for a second and then plays normally and it happens when I play music on itunes. Because I didn't have this problem before, I'm not accusing the update. Is there a way I can go back or how can I return to normal?

  Oh God, what have I done? :(

  You can try to update a sound/display drivers on the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] Bios update should not cause a problem like yours, but who knows... (You can also try to load the default settings in the Bios)
  Updated version of itunes and try how movies on VLC and Kmplayer

• Satellite U400 - after the BIOS update I can't start Windows

  I have laptop Toshiba Satellite U400, PSU44E and Win XP. After you have installed the new BIOS v. 3, 80-WIN32, it is not possible to start Windows, it always ends in restart. It is also not possible to reinstall Winsdows, as it always ends with the blue screen.

  Any help or suggestion?
  How can I install back my backup BIOS BACK?

  Hello

  Did you really choose the good BIOS for your laptop? Because on the Toshiba site Web are different models U400 has so you choose for PSU44E BIOS on Toshiba page?

  After the BIOS, you should load the default settings in the BIOS.
  Did you check that?

  A downgrade from the BIOS is not possible. This is possible only from an authorized service provider. So, you should contact them and ask a technician for help. I m sure they will help you. ;)

  Good bye