Wave of the NOF Board of colored different data of

Similar Questions

• Migration of all the catalog items to a different data store in the same storage profiles

  Hello

  is any possibility to migrate everything in the catalog (time and iso files) to a different data store that has the same profile (Silver) storage group?  Because I have 2 groups of data store with the same profile of storage (Silver) and I want to delete one of this cluster.

  I found this kb: http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2058094 but it speaks solely of media files of migration between different storage profiles.

  Have vCD 5.6.4

  You happen to use rapid Provisioning?  This is probably the only problem I can think of.

  Environments that have no linked Clones or shadows created from them, you can just Storage vMotion them between the same storage policy data warehouses.  Just make sure that the data store or a store of data clusters are visible in vCloud Director first of all in the framework of this storage policy.

  When you use linked clones, I don't remember the exact process... I think that I have in my office somewhere (I'm at home now).

• List not updated virtual machines after the migration of the virtual machine to a different data store

  My vSphere infrastructure 5 uses several data stores.

  Two data warehouses are associated with NFS on different NAS shares.

  I migrate VM to a data to another store.

  The navigation data store, I see that the files are moved from the old data store to the new and that no file belonging to the migrated VM still does exist on the old data store.

  If I look at the list of VMs on the old data store, I still see the old VM.

  I see it in the list of the virtual machine on the new data store as well.

  I checked that no .iso no pagefile is in the old data store.

  How can I update the list of the virtual machine on the old data store?

  Above all, how can I safely delete the old data store by ensuring that the virtual machine works very well on the new data store and I don't lose anything?

  Concerning

  Marius

  This use of data store 'Phantom' is usually observed, if the current configuration of the virtual computer points to the 'old' data store (diskette, CD-ROM) or the virtual machine contains snapshots where - at the time where tone have been created - the VM has had these references. Once the snapshots are deleted from data store 'ghost' will go away from summary of the virtual machine.

  André

• Perform the same process twice on different data. Bug or what?

  Hello
  I am using Oracle 11 g R2 SOE. I have three tables identical almost :
  This table contains images

  TEMP
  (ID number PK,
   CONTENT blob,
   FILENAME varchar2 (200), 
  FILESIZE varchar2 (200),
   MIMETYPE varchar2 (200),
   RES_ID FK)

  I'll take pictures of the TEMP table and watermark, resize them. and store them in the IMAGES_TEST TABLE

  IMAGES_TEST 
  (ID number PK,
   CONTENT blob,
   FILENAME varchar2 (200), 
  FILESIZE varchar2 (200),
   MIMETYPE varchar2 (200), 
  RES_ID FK,
  WATERMARKED VARCHAR2 (1))

  Generate thumbnails from images in a table TEMP or IMAGES_TEST and store the thumbnails in the Table IMAGES_T

  IMAGES_T
  (ID number PK,
   CONTENT blob,
   FILENAME varchar2 (200), 
  FILESIZE varchar2 (200),
   MIMETYPE varchar2 (200), 
  RES_ID FK,
  IMAGE_ID FK)

  In short, the problem is that I can't use ORDSYS. ORDImage.process twice, even if it is applied on the different variables.
  I need to use it once to resize the images as follows:

  ORDSYS. ORDImage.process (V_source (index), 'fixedScale = 800 500');

  Then use it again to create thumbnails as follows:

  ORDSYS. ORDImage.process (V_source_T (index), 'fixedScale = 150 120');

  PLS, see the next post:

  >
  But, I get the error, more or less, "HAPPY IS NOT DECLARED"
  >
  Reread my answer - BLOCK COLLECT you all of the line at the same time. You always try to make the columns one at a time.

• Error when you try to move the cloudvolumes folder in a different data store

  OK, so I'm moving my App volume 2.10 cloudvolumes folder of datastoreA on vcenterA on datastoreB on vcenterB, because we want to separate us from our VDI of our basic infrastructure.

  We are able to access the two vcenters on the web client.

  I tried to just copy the folder datastoreA to datastoreB cloudvolumes and received the following error.

  Copy of the file object has already been deleted or has not been entirely created

  
  

  I've seen this error in Veeam before when moving virtual machines from a data store. The solution is to remove and readd the virtual machine in the inventory.

  
  

  Everyone tried to move the cloudvolumes folder?

  
  

  Any help would be appreciated.

  
  

  Thank you
  

  
  

  
  

  I would never move the folder because there are files that will always be accessible or are not in read/write mode.

  I suggest you copy the files from the 1 folder to another, or maybe add an additional data store to the manager Appvolumes and let the files (appstacks at least) copy automatically.

• doubt in the creation of tables in different data in a tablespace files

  Hi good Eve everyone,

  in my scenario, I must create nearly 50 paintings with 3 data files in a table space.

  I have to save the top 15 in datafile 1 and 15 next in 2nd datafile and the rest in 3rd datafile.

  How do I create and tables in a data file of the group.

  looking for a helping hand in need...

  thanking you in advance

  Prakash

  You can do this, but it's awkward. Here is an example:

  ALTER session set deferred_segment_creation = true;

  create tablespace twofiles datafile 'c:\tmp\tf1.dbf' size 1m,'c:\tmp\tf2.dbf' size 1 m;

  create table infile1 (c1 date) tablespace twofiles;

  create table infile2 (c1 date) tablespace twofiles;

  ALTER table infile1 allocate extended (datafile 'c:\tmp\tf1.dbf');

  ALTER table infile2 allocate extended (datafile 'c:\tmp\tf2.dbf');

  Select nom_segment, file_id from dba_extents where nom_tablespace = 'TWOFILES ';

  However, it is simpler to let the Oracle uncle to decide how to distribute the scopes.

• Cloning of VM/TIME to the different data store

  Hi all

  I am working out scripts excellent clone of Ruben garcia and one thing I'm trying to add is to have the VAPP created on a different data store.

  # Clone and move virtual machines
  {foreach ($vm to $vms)
  $vm = $vm | Get-opinion
  $vmname = $cloneName + "»" + $vm.name "
  . \LcloneVM $vm.name - cloneName '$vmname' - «$PortGroup» PortGroup
  Get-vm-name $vmname | Move-vm-destination $vapp;
  The virtual machine are getting cloned and then inserted in the passed TIME as a parameter name, but I can't understand how do to have the VAPP will be created on a data store that I specify. At this time the vApp is created on the same data store where the linked clones. Can I travel after from the user interface by using the migrate command but I want if possible to automate it.
  I thought that the next line should work but the VAPP fails when creating, so the move-vm command fails later.
  # Create VAPP

  $vapp = $host_name | VAPP-new-name "$cloneName" - data store "ThinDiskTesting"

  I am at a loss to what im doing wrong

  Post edited by: BrianRTS - difficulty of setting in the form

  You can specify the data store where you want to create linked clone delta files.

  This requires a slight modification to the script of Ruben

  # Generate specs for clone
  $cloneSpec = new-object Vmware.Vim.VirtualMachineCloneSpec $cloneSpec.Snapshot = $sourceVM.Snapshot.CurrentSnapshot $cloneSpec.Location = new-object Vmware.Vim.VirtualMachineRelocateSpec $cloneSpec.Location.DiskMoveType = [Vmware.Vim.VirtualMachineRelocateDiskMoveOptions]::createNewChildDiskBacking $cloneSpec.Location.Datastore = (Get-Datastore -Name $tgtDatastoreName).ExtensionData.MoRef
  

  Ownership of the data store is used to indicate where the clone should be placed.

  Or you want to create the clones, then move them?

• How can I move a data store a single virtual disk shape in a different data store?

  I have a host running vSphere 4 enterprise that belongs to a cluster of Foundation vCenter 5.5.  I need to move all the guests off the coast of this host to be updated. This host has a client that is using the local hard disk as a data store.  This customer has six 6 hard drive with only using the local hard disk as a data store.  How can I move the hard drive to a different data store?

  When I try to use 'Move' or 'Migrate' with vCenter (client or web interface), it seems that I can move only data not store a single entity, each database individually.  Can we move a data store single someway with the guest always under tension, or do I have to power off and manually move the "vmdk" they reattach the hard drive?

  
  

  Thank you

  
  

  Bruce

  When you click on migrate, the data store, click on the Advanced button.  It will give you the option to select a disc.  You can migrate it while it is running.

• Recovery of the space in a file of data/tablespace in 10g

  We have a tablespace of 30 GB, made up of 15 data files of 2 GB each. However, there are only 5 GB of data in the tables within this space of tables.
  
  This occurred because the database kept growing (so the new data files have been added) until it was discovered that a single journal table occupied almost all the space. When this table was truncated, he left more space free, but "fragmented" across all 15 files given.
  
  I'm trying to reclaim the space in the data files to be able to go back to the OS (there is no reason to keep more than 7-8GB to this tablespace).
  
  From what I've read, the "alter table xxx move" command must relocate the tables to new segments to the 'before' of storage space, and then we should be able to delete the empty data in the end.
  
  However, when I run this command on a test table, nothing appears to change everything.
  
  I am running:
  
  ALTER table AAFDTCRC move;
  ALTER index RM. Regeneration of the PKAAFDTCRC;
  exec dbms_stats.gather_table_stats (ownname = > 'RM', tabname = > 'AAFDTCRC', estimate_percent = > null, method_opt = > 'for all THE COLUMNS of SIZE AUTO', degree = > 6);
  
  However, when I ask the dba_extents table, is to show the table always distributed in different data files. I use the "alter table" command incorrectly, or is the table dba_extents not up to date with new information?
  
  Any help would be appreciated. Thank you!

  user11198894 wrote:
  Measure sizes might be a problem. Looks like that the previous data files use a size smaller than those created after measure. And I have naven can't able to find much information about what "alter table... move" when a tablespace has more than one data file. Maybe it does work in this situation?

  You will not be able to reduce the number of files in a tablespace; so if that's your goal, you will need to create a new tablespace and move objects inside. In addition, you will not be able to avoid a performance impact, unless you use the dbms_redefinition package to move tables because the MOVE command makes the unavailable table and requires you to rebuild indexes.

  There is a note that I wrote some time back - with a pointer to a helpfuil script - which gives you a few ideas of how Oracle behaves with management space with multiple files when you move objects: http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/

  If you want to keep the same tablespace you can try something roughly like this:
  

  
  Run my script to report on the current use of space
  Reduce as much as possible all the files
  Move objects more big are reaching the end of the files
  Repeat as necessary to step 1
  

  Concerning
  Jonathan Lewis

• How can I make the menu title of a different color when it is horizontal Spry menu menu?

  How can I make the menu title of a different color when it is horizontal Spry menu menu?

  Dreamweaver CS5.5

  Apple OS X.6.8

  Display of the site to: http://Dorsay-Easton-Indian-law.com/staging/index.html

  Steps to follow:

  1. click on the link to land on the home page

  2 link see Home in the Spry horizontal navigation menu

  Real:

  Title of the home menu is the same color as all the others.

  Expected:

  The title of the active menu is color: #FFC.

  I was hoping that a: active would give me this feature, but it's not how it is described. All suggestions are welcome!

  The tag BODY nothing that I tried in the editable model. This is why I wonder how to disconnect the model individual pages. Adding an ID to each body tag is a condition sine qua non of the how-to page that you provided.

  You are not theeditable in a template tag.

  You are the attributes of theeditable tag.

  Do not unplug the model child pages.

  Specify editable tag attributes in a template

  http://help.Adobe.com/en_US/Dreamweaver/CS/using/WScbb6b82af5544594822510a94ae8d65-7aa3a.h tml

  In the model:

  1. Select ittag (in the tag selector, or click inside the)tag in Code view)
  2. Modify > templates > make attribute editable
  3. Select the code in the drop down attribute
  4. If there is no ID attribute then click Add and type the ID in the next dialog box
  5. Attribute: ID
     Check the box 'Make attribute editable '.
     Enter anything in the field of the default label for example foo
     Ok
  6. Dreamweaver will change thetag to read
  7. The ID is now editable
  8. Save the model and update the child page

  In each page of the child:

  1. Edit > properties of the model
  2. Select the id attribute in the list (it's probably the only one listed)
  3. Change its name in the box to any name matches your CSS rule for the active state of the page
  4. Ok
  5. Save
  6. Download

• Flex 3: data of the ComboBox should appear in different colors:

  Hello

  I use ArrayCollection as a DataProvider collection to my Flex 3 Combobox component.

  
  Please tell me how to make the data in the COmbobox to appear in different colors?

  Indicate if you please, thank you.

  Custom itemRenderer

• Synchronization of the inputs and outputs with different sampling frequencies

  I'm relatively new to LabView. I have a NOR-myDAQ, and I am trying to accomplish the following:

  Square wave output 10 kHz, duty cycle 50%.

  Input sampling frequency of 200 kHz, synchronized with the output that I get 20 analog input samples by square wave, and I know what samples align with the high and low output of my square wave.

  So far, I used a counter to create the square wave of 10 kHz, display on a digital output line. I tried to pull the document according to (http://www.ni.com/white-paper/4322/en), but I'm not sure how sample at a different rate than my clock pulse. It seems that this example is intended rather to taste one entry by analog clock pulse. There may be a way to create a faster clock (200 kHz) in the software and use that to synchronize the analog input collection as well as a slower 10 kHz output generation square wave?

  I eventually have to use the analog inputs to obtain data and an analog output to write the data channel, so I need the impetus of the square wave at the exit on a digital PIN.

  How could anyone do this in LabView?

  Hi Eric,.

  All subsystems (, AO, CTR) derive from the STC3 clocks so they don't drift, but in order to align your sample clock HAVE with pulse train that you generate on the counter, you'll want to trigger a task out of the other. I would like to start by a few examples taken from the example Finder > Input and Output material > DAQmx. You can trigger GOT off the train of impulses, start by Gen digital Pulse Train-keep -you probably already use a VI like this to generate 10 k pulse train. AI, start with an example like Acq Cont & chart voltage-Ext Clk - Dig Start.vi-you'll want to use the internal clock so just remove the control of the "Source of the clock" and it uses the internal clock. From there, simply set the "Source of the command" either be the PFI line generates the meter, or ' //Ctr0InternalOutput '-assuming that you are using the counter 0. You'll want to make sure that the start of the task HAVE faced the task of counter I is ready to trigger off the first impulse. They should be aligned at this point.

  For debugging, you can use DAQmx export Signal to export the sample clock - you can then brought the train line and the PFI pulse to make sure that they are aligned.

  Hope this helps,

  Andrew S

• CANON 70 D HAS NO POWER USING THE ADAPTER SECTOR OR 2 DIFFERENT BATTERIES

  I WAS USING THE CAMERA THE DAY BEFORE, I BOUGHT THIS CAMERA IN DECEMBER 2013. I USED THIS CAMERA VERY SLIGHTLY.

  TODAY, I WENT TO DOWNLOAD VIDEO FROM THE CAMERA TO CHANGE IT, BUT THE CAMERA WOULD NOT TURN USING THE A/C ADAPTER. I KNEW THAT NOTHING WAS WRONG WITH THE ADAPTER, BUT I PUT IN 2 DIFFERENT BATTERIES AFTER CHARING, THEM AND STILL NO POWER.

  I HAVE REPEATED TO TRY THE A/C ADAPTER AND BATTERIES. I TRIED TO TAKE THE CARD, THE LENS AND MAKING SURE THAT THERE NOTHING PREVENTS THE CONTACTS FOR THE A/C OR BATTERY.

  I STARTED SEARCHING ONLINE OF THE KNOWN FOR THE CANON 70 D ISSUES, I DIDN'T KNOW ANY SPECIFIC 70 D BUT I FOUND A FEW ISSUES FOR OTHER CAMERAS OF CANON WITH THE SAME QUESTION.

  SOME WERE TOLD TO TAKE THE CARD AND THE LENS AND REPLACE IT WITH ANOTHER GOAL, THEN PLACE THE CARD BACK, AND THEN ADD THE BATTERIES AND THAT WILL FIX THE PROBLEM. IT DOES NOT WORK. ANOTHER VIDEO THAT I FOUND SAID THAT THERE WAS A SCREW LOOSE ON THE CIRCUIT BOARD PRINTED FOR THIS OLDER CANON CAMERA... HIS SCREWS SEEMED TO BE MORE IMPORTANT THAN THE SCREWS THAT THE 70 D A SO IT WILL BE VERY HARD FOR ME TO FIND A SCREW DRIVER THAT SMALL... I HAVE TO GO BUY A KIT. BUT NOT RADIO IM LOOKING AT THE BOTTOM OF MY CAMERA IF TAKE APART WILL WORK, IT SEEMS THAT MY CAMERA BODY COMES OFF AS NOT EASILY THAN VIDEO.

  SO NOW IM STUCK WITH MANY PROJECTS VIDEO IM IN THE MIDDLE OF... BUT NOW I DON'T HAVE A CAMERA... I CAN'T AFFORD TO DO REPAIR, AND I CAN'T AFFORD TO BUY JUST ANOTHER CAMERA AND I'M NOT SURE IF THIS UNIT IS UNDER WARRANTY FROM CANON. I BOUGHT AT B & H PHOTO AND I STILL HAVE THE RECEIPT OF E-MAIL FROM THE PURCHASE.

  https://www.YouTube.com/watch?v=FYlNyZ1IP3s

  HAS ANYONE ELSE HAD THIS PROBLEM WITHT THE CANON 70 D?

  AFTER VIEWING THE VIDEO SHOWING THE SCREW CAME OUT ON THE MOTHERBOARD OF THE PC, NOW I SHAKE MY CAMERA, I THINK I CAN HEAR SOMETHING MOVING INSIDE... BUT IT COULD BE MY IMAGINATION. I'M NOT 100% SURE, I HEAR SOMETHING LOOSE. IT REALLY SUCKS BECAUSE I CAN'T COMPLETE MY PROJECTS AND I'VE FITTED THE CASE OF MONEY THE NEW LENS CAMERA AND PURCHASE HAS RECENTLY...

  IF YOU CAN NOT SAY THAT IT IS THE BATTERIES BECAUSE IM ALSO USING AN A/C ADAPTER. I KNOW HOW TO TURN ON THE CAMERA! IM GETTING NOTHING. NO POWER,

  I NEED HELP.

  I CORRECTED MY OWN QUESTION.

  WHAT WOULD HAVE COST ME HUNDREDS OF DOLLARS BY SENDING IT TO CANON, I MANAGED TO SOLVE THIS PROBLEM AND PERHAPS OTHERS HAVE HAD THE SAME PROBLEM AND THEY MAY HAVE SPENT MONEY UNNECESSARY. I SPENT ONLY $6 AND A FEW CHANGES... ALLOWS CALL HIM $7 TO SOLVE THIS PROBLEM.

  I DON'T HAVE TO DISASSEMBLE THE APPLIANCE BUT AS HE TRIED TO DO, I SAW SOMETHING THAT I SUSPECTED WAS THE QUESTION. I PLAYED A BIT WITH THIS SWITCH OR SOME TYPE OF CENSORSHIP OR LOCK.

  SOMETHING LIKE THIS WAS SO SIMPLE TO SOLVE, BUT COULD HAVE COST ALLOT ME OF MONEY. THE PART IS TOO DELICATE. NOW THAT I'M AWARE OF THIS, I CAN BE MORE CAREFUL, BECAUSE I WAS ALREADY VERY CAREFUL WITH ALL MY CANON... BUT IT WAS SOMETHING I WOULD HAVE NEVER EXPECTED THAT IS THE PROBLEM, I SAW THAT HOLE SOONER BUT NA NOT KNOWING WHAT IT WAS FOR... WHILE I WAS GETTING READY TO TAKE OFF THE BATTERY COVER, I NOTICED SHE HAD A TYPE OF CONNECTOR THAT WOULD GO IN THE HOLE (SQUARE) SO I SIMPLY PUT A PEN IN THE HOLE AND THERE IS A SWITCH OR SOMETHING, I PUT THE SWITCH IN THE CENTER. I PUT THE BATTERY IN THE CAMERA, AND THEN HE CAME.

  https://www.YouTube.com/watch?v=nBmtTQn3RlE

• To get the background and foreground color of the screen title

  Currently the title screen background color is black, and foreground color is white.

  But when we use custom theme then it can have different background and foreground colors.

  That's why I need to pick up the color of the screen title properties.

  How can I achieve this?

  Thank you

  I think you want to color your application according to the background and foreground color! Override the paint of the main method and use instance graphics for call getColor () and getBackgroundColor ()... Save it to integer variables and use it anywhere where you need...

  See you soon...

• What is the function of the controller board?

  Hello!

  It seems that two series B as well of the C series have dashboard controllers. What is the purpose of the controller board?

  We have the BMC/MMIC for managing the server and read the sensors. The CMC to function as the 'control plan' of the IOM in the chassis. But what made this controller card and why cant I see not before M3 version on the blades?

  I've read a few people saying that the controller card is the same as the BMC/CIMC, but why then cisco would write things like: "once the CIMC firmware is upgraded, upgrade the room controller."

  And I also found this: "Cisco UCS C-Series M3 rack servers have firmware controller board that controls many functions of server such as eUSBs and connectors e/s. You can activate firmware controller board on these servers in a rack.<- is="" that="" not="" the="" bmcs="" function?="" if="" not,="" why="" is="" this="" function="" not="" usable="" in="" the="" m2="">

  Best regards

  Hello

  The controller card and MMIC are two different components. Be aware that the BMC/MMIC are identical from a point of view of terminology.

  The controllers of the Council is to regulate the voltage to the DIMMS to the ECC/UECC errors. The extent of why wasn't in the m1/m2 line (I think the b230 m2s have controllers of the Commission), the m3 line is when the value has been added.

  I hope this helps.

  Justin