Way prevents you going to specific sites?

Similar Questions

• Error 101 when you navigate to specific site but only the House on WAG160N

  We are working on a new site that is hosted on Rackspace. http://travelcafe.co

  For some inexplicable reason, we have intermittent connection problems when you try to access this site and the backend of wordpress. We are able to access it for an hour or two and then it would become unavailable and this can be for an hour or more. During these times, we get an "error 101.

  Error 101 (net::ERR_CONNECTION_RESET): the connection has been reset.

  This problem is almost certainly unique in our location / ADSL connection. We had people to other places check as we are unable to access the site and when they can. We also checked the site using the 3G network and is accessible when we have our ADSL connection problems.

  We tried to use static DNS addresses (Telecom, then Google, then Open DNS)
  We put in a cell Modem ADSL Dynalink RTA1025W thinking it was a problem with the modem.
  We tried the Telecom standard Modem Thomson, but caused even more problems (binned that one too).
  Now, we have installed a new Linksys WAG160N, but we have the same problem (but a prettier modem)

  Discussions with the support of Telecom were unsuccessful

  We connect (in case it isn't already obvious) via the ADSL of Telecom network. I am based in Manly, Auckland NZ. Our connection is also very well even if we have noticed on some of our devices recently that Facebook and Google.co.nz are unavailable for a short period. Often from right within 30 seconds approximately. This may be related.

  The Travelcafe.co domain name is registered with GoDaddy. I'm about to move to Rackspace as well and see if that helps. (Rackspace do not think so, but I'll do it anyway to clean things).

  If you have encountered similar problems with intermittent errors on specific sites, I would be extremely grateful for any advice / help.

  Thank you

  Thanks - but the problem now solved. It was question of Cache to our ISP server. They made some changes and the problem resolved.

• Since I upgraded to El Captain mail has not learned from my spam or not spam choice.  I can't find a way that I can block specific sites.  Suggestions?

  Since I upgraded to El Capitan mail has not learned from my spam or not spam choice.  I can't find a way in the preferences to designate specific as spam sites as I used to be able to do.  Suggestions?

  Hi DACav

  You can create a rule that sends the e-mail from a particular area in your trash.

  Address postal (El Capitan): use rules to manage your Inbox

• When I'm not going to update 6.0 to 6.4, it become a CC version 2015.4! I used to stay in 6.4 and no. CC version! Do you have a specific process for this?

  When I'm not going to update 6.0 to 6.4, it become a CC version 2015.4! I used to stay in 6.4 and no. CC version! Do you have a specific process for this?

  See if this link helps:

  https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• White list of specific sites to use SSLv3

  Is there a way to allow specific sites to use SSLv3 (IE whitelist SSLv3)?

  More old equipment from network and other management interfaces are not likely to be updated, but I don't want to make a fix all or nothing for a handful of sites.

  as this is mainly managed by the community support forum is probably not the right place for the characteristics of the request (we are unable to implement all the features & devs read here). Please use https://input.mozilla.org/feedback for either your reactions or if you think that it is a missing feature in the browser file a bug at bugzilla.mozilla.org.

  I agree with ideato that a portable version of firefox that is configured and used just for that purpose is probably the best way to go about this at the moment...

• When I zoomed in on a website, the other tabs with the same zoom area too; is there a way to disable the page Web site global zoom?

  When I zoomed in on a website, the other tabs with the same zoom area too; is there a way to disable the page Web site global zoom?

  You can change the zoom to be specific tab instead of in-situ.

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste the zoom and make a pause so that the list is filtered

  (3) double-click the preference browser.zoom.siteSpecific from true to false.

• Launch Dreamweaver CS4 and open a specific site

  One of my stumbling blocks from GoLive to Dreamweaver CS4 9 is to find a way to open a specific site at launch of Dreamweaver.  GoLive has a "name.site" file that contains site specific information.  Double click that GoLive site file launches GoLive (or switches to the currently running application) and in fact the current/first site plan of the site.

  With Dreamweaver, I can click twice on a page of a site and launch Dreamweaver.  However, the active site of Dreamweaver is one that has been active at the end of the last session of Dreamweaver.

  Is there a way to launch Dreamweaver to automatically open a specific site?

  -Barney

  Is there a way to launch Dreamweaver to automatically open a specific site?

  N ° if you think it's important for your workflow, request a feature through the official form.

• How do you see your bookmarks if you have a Web site open?

  It doesn't seem to be any drop-down menu or the button to display your bookmarks while you are browsing Web sites. I have to close all the tabs, and then there is a bar at the top that says bookmark. It is not very practical when you're in the middle of the navigation. I tried to leave a tab open to just my favorites and other tabs to my bookmark tab open, but when I go back to my bookmark tab, it is all reset and I have to start all over again drill down bookmark files. Yet once, is not useful at all. Is there an easier way to access my favorites while having Web sites open?

  To check the bookmarks that you do not have to close tabs. Type right on the address bar or open a new tab and tap on the Bookmarks panel.

  There is no drop-down menu or list button to display the bookmarks. The reason for this is to simplify / unify UI keep lightweight browser as mobile devices generally have fewer resources and space on the screen compared to desktop computers.

• FF8 + dialog box popup "application/vnd.wap.xhtml+xml" when you access a Web site.

  FF8 cannot use the www.translink.com.au trip planner.

  When I fill in the fields and click on 'Find journey' - a dialog box appears

  "You have chosen to open the trip planner.
  which comes from application/vnd.wap.xhtml+xml a: (27.6 KB): http://jp.translink.com.au
  What should Firefox do with this file?
  Opened with Browse...
  Save the file.

  Also a few other buttons on this site do the same thing, for example. On this page and train travel planner:
  http://TransLink.com.au/travel-information/services-and-timetables/buses/Route-204
  -If you click on the button 'Show time' - it does the same thing.

  This site worked before ok with FF7 and IE8.
  A release with the troubleshooter from the site Web - no response.
  Now it is unusable and don't know what to do.

  Other than this problem only seem to work ok - FF8 so this Web site is to blame?

  Googled the problems forums and looked for a solution - it's a problem similar to mine:
  http://support.Mozilla.com/en-us/questions/796303?s=application%2Fvnd.WAP.XHTML%2Bxml & r = 1 & s = ACE

  PS - to confirm - I use a desktop pc with a mobile broadband usb dongle.

  I hope someone can help.
  Thanks in advance.

  "FF8 + dialog box popup"application/vnd.wap.xhtml+xml"when you access a Web site."

  THE PROBLEM ABOVE IS NOW COMPLETELY RESOLVED.

  The site in question was the problem - NOT 8 Firefox or Linux Mint.

  The site has been fixed and now works as it should.

  If someone else gets a dialog box pop-up similar box to the above - suggest that they contact the administrator of the website the problem and inform them that their site user agent detection Web is not correctly identify your version of Firefox mobile browser and so redirecting to a mobile version, return of mobile specific markup (Content-Type).

  Check the Whirlpool forum: http://forums.whirlpool.net.au/forum-replies.cfm?t=1821427

  and here for a similar problem: http://support.mozilla.com/en-US/questions/796303#answer-158925

  As mentioned above, for the temporary site issue features while it is currently set, install the extension switch from User agent.

  https://addons.mozilla.org/en-US/firefox/addon/user-agent-switcher/
  

• How to block specific sites from my computer?

  original title: program block

  How to block specific sites from my computer?

  Use a parential control program, or you can block your network using your router control panel.
  The parential controls Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Set-up-Parental-Controls
  K9: http://www1.k9webprotection.com/

  teengeek.freehostingcloud.com Microsoft community contributor

• Restrict internet access to only three specific sites on behalf of the employee, but allows full access to the account manager

  Hi all

  In collaboration with a client who wishes to have a cell phone can be used by the staff and management at his restaurant. He wants management to an unrestricted administrator account, but wants the staff to have a user account restricted, such that they can only use web browsers to navigate to three specific sites. Have done the research on this for hours now and can't seem to find a solution to what should be a simple problem. All proposed software costs money, which the owner is not interested. Any help?

  Hello

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your patience.

  I hope that you will soon have the resolution of the issue of the TechNet forums.

  However, you can also consult the security forum as part of TechNet.
  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itprosecurity

  Thank you

• 'The security policies on this PC prevent you to choose certain options' / USERS / CHANGE PC SETTINGS

  For my RT of Microsoft Surface, under PC SETTINGS in the USERS tab, I get the following message in CHARACTERS RED:
   
  "The security policies on this PC prevent you to choose certain options.
   
  This message appears immediately below "require a password after that display is disabled for.
   
  As a possible solution, I tried the PC to a Microsoft Account to account Local switching and switch and then back again, but this does not improve the issue, no impact.

  Any suggestions on what is the source of this message and how to better resolve would be appreciated.  Note that I have several e-mail accounts associated with the Mail for Surface RT application, including on the Exchange based account.

  Thank you, AEK2891

  These are synchronization of Exchange Corporate e-mail system and security policies that are applied through Exchange Active Sync (EAS). These policies may impact how long before the mobile device (phone or Tablet) goes to a screen lock, if the PIN or password photo can be used to connect to the device RT for Windows. These are set up by your e-mail administrator or Corporate IT Security Team.

• Search for a specific site does does searchstate tag?

  Hi Experts

  We have a scenerio where some of our assets are shared between sites. We use searchstate tag to run a search wide site on many places. I just wanted to know weather this tag done side specific research or a specific asset. How do I strain to specific elements of site. I ask here because I can't find anything in the reference of the tag in this regard.

  Thank you

  Deep

  Hello deep,

  You can filter by site in the assetset:setsearchedassets> tag that uses the searchstate to retrieve a list of goods. You must specify the site id in the site setting. Here is an example of the attribute of ImagePicker Editor:

  Note that in your site Web you probably cannot use ics. GetSSVar ("pubid"). Usually, determine you the site id based on the setting of site on your model and then look for the id, for example by looking at the table in the Publication.

  Kind regards

  Stephan.

• Can I do a button change anchor link when you scroll through the site?

  I'm doing a scrolling site... and I have navigation buttons on the right, a full menu, but also a '1 topic upward' button and the button "1 heading downwards.

  Is it possible that I can have these buttons change anchor link when you scroll through the site.

  Example:

  I'm at home, then I press "1 heading down" and scrolls to the next topic on the site, but then I can't change the button to create a link to the lower anchor, then the button becomes useless after 1 press.

  Is it in any way possible in Muse to change the link?

  Hello

  You can try to create different buttons on the positions of the page where the scroll will be active with separate button actions. For example, you click on "I am heading down", page scrolls and there is another button set with "Next topic down", click on, it would scroll the page plus and the same on the length of the page.

  Button with anchor link scroll to the bottom of the page can not be used for different anchor links, creation of different buttons with anchors is the solution.

  Thank you

  Sanjit

• What is the correct way or better to manage your site files according to the folder of your site?

  I apologize if this seems to be a silly question but I'm still having trouble getting my head around the management of files when using dreamweaver. I know that I am supposed to create a root folder that I created on my desktop. All of my sites that I have here in create in dreamweaver go to sub files in this main file or am I supposed to have several root file?

  Ive assumed I create a single up to that point. However I have other questions... for example when I create a fluid grid site I go through the steps of creating first my folder under this new site in my account from the main root for dreamweaver, save my css inside file when asked, and then I save the html file main Sub ' save under ' as well... However, as you know, creates then two files separate, 'catch-all' and 'response' but instead of placing them in my folder of pennies for this site, he places them in the root file instead of in the subfolder that is located in the file root (if necessary). If I manually move them to the sub folder to keep things tidy this will mess up my files? Dreamweaver will be able to go to search folder under rather than the file root where he keeps putting automatically their?

  Or I have the complete wrong end of the stick to understand how to make the management of the work all together?

  Any help greatly appreciated

  Ed

  OK so just to clarify. Each site actually has its own root folder and simply for the love of the organizations you place all of your files to the root of each site in a larger folder which in your case is called 'sites '.

  Exactly that.

  My confusion is that dreamweaver seems to have everything automatically create new site, I try to go in a root folder, I created a site earlier. That's why I guess you don't have that one folder root and all of your different sites exist within of the it.

  Ignore this. I see sometimes that happens as well. But because you browse to find the folder new root of the site in any case, it is imminent can be ignored!

  -I created a new folder outside of dreamweaver on my desk first who must accommodate all that documents sites. I was the creation of each new folder in what I thought, it's the main single root for dreamweaver folder that was on my desktop up to this point.

  There is no "single root for dreamweaver folder. As you might have guessed, each site has its own root folder and root each folder contains * all * files that make up this particular site. ***

  -J' then I open dreamweaver and will create a new site layout fluid grid

  -He asks me to save my css somwhere... I save in my new site folder (I now know what will be the root folder of my sites that each website has its own root folder)

  All my sites have a "_css" at the root folder. I precede these files with an underscore so that this and other like him (for example '_img', "_scripts", etc.) will sort together, and at the top of the list of files. This issue of _css in the root of this site, this is where I would put the stylesheet quote you. ***

  -When he opens all I go to 'file' and ' save under ' so that I can put the HTML in the document in my root folder as well. (don't forget this root folder is sitting in another folder called "root folder" but you assume I simply call 'sites' in this example.)

  So. ***

  -When I do this the html records in the folder root of the site as I hope.

  -However, dreamweaver application also my permission to create two new documents as mentioned (boilerlate and respond). Despite me trying to click the folder root of sites and it saves the documents it contains, like the rest, he saves instead what is in your folder "websites" in this example... next to the folder root of sites that i would have it should be in (not... correct me if I'm wrong)

  Well, this suggests that you have not set the root folder properly. These two files must be saved in the root of the site. If this location is not what you are talking about as the root of the site, then something is wrong.

  Why do you think that what is happening? or is it supposed to? I would have thought not myself.

  as I side question while I'm here... when I see that my css or js documents have been saved in the wrong place, as I assume they were in the example above... How can I change the location of their in dreamweaver so that dreamweaver knows where they have been moved to? I know not how to do for the HTML document main because its easily done using "save under" on the file menu, but I'm not sure how do for the other document that dreamweaver creates something like a checkerboard to fluid.

  Sorry... I'm sure it's painful for those who know how... but I'd love to get my head around things like basic

  The best way to change the location of all files used in a DW site is to use the DW files Panel to drag - move these files to the desired location. Management of DW links will kick when you do this and adjust all the existing links to these files to accommodate your move. ***

  Here is a series of images that show the process to create a new site-

  THE NEW PROCESS OF SITE

  

  NAME of THE SITE, THEN BROWSE to THE NEW LOCATION for THE ROOT (this image shows the starting state of those that have been done before)

  

  NAVIGATE TO THE FOLDER OF YOUR NEW SITE WILL BE CREATED IN WHICH

  

  BY CLICKING THE NEW FOLDER OPTION, YOU CREATE THE NEW SITE ROOT FOLDER AND THEN CHOOSE IT

  

  I CREATED TWO NEW FILES IN THE ROOT FOLDER THAT WILL HOST MY CSS AND IMAGES RESPECTIVELY

  

  After SELECTING THE NEW ROOT FOLDER of the SITE AND clicking 'Choose' I SEE THE DIALOGUE START WITH THE path box to ACCESS CORRECT WORMS CE FOLDER ROOT IN THE FIELD RECORD of SITE LOCAL

  

  I hope that helps!