We can implement random generator lv in hardware?

Similar Questions

• How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

  Hello

  How can implement you not with Time Capsule and AirPort their simulation on the iMac?

  I don't know what you're asking.

  AirPort Extreme is a wireless router.

  A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.

  An iMac is a Mac computer.

  An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.

• My MacAir guard pick up ads etc. - I deleted the previous links that helped - is it a cleaning system I can implement on my Mac Air to stop it happening again

  My MacAir guard pick up ads etc. - I deleted the previous links that helped - is it a cleaning system I can implement on my Mac Air to stop it happening again

  Fixes for Adware and pop-ups:

  1. Malwarebytes
  2. 2.11 DetectX
  3. Remove the adware that displays pop-up ads and graphics on your Mac
  4. T stop advertising windows pop-up and adware in Safari - Apple Suppor

  I had good results with GlimmerBlocker.

• draw the histogram of the random generator of > > >

  Hello

  I have a bulit a random generator by using + 1 D Cellular Autómata LFSR

  I need to draw the histogram of the system to check the shape of the distribution

  I have the vision of labview

  help me draw

  I thank you in advace

  concerning

  Mathematics-> probability and statistics, below a histogram express vi that will help you.

  

• The streaming videos on Windows Media Player error "your media usage rights were corrupted or are no longer valid. This can happen if you have replaced hardware components in your computer.

  I'm trying to videos from 3 completely different sites.

  The last post I got Windows Media player was

  "Your media usage rights were corrupted or are no longer valid. This can happen if you have replaced hardware components in your computer. »

  I replaced WITHOUT hardware on my computer, and last week, I could listen no problem at all!

  How to get corrupted my media usage rights and how to remedy the situation?

  I'm not a complete dummy, but sometimes I feel like one. :(

  Hello

  This problem can occur if the media rights (DRM) a folder is corrupted. We need to reset Windows Media DRM in delete/rename all the files in the Windows Media DRM folder. Note that the Windows Media DRM folder is a hidden system folder.

  Check out the links and follow the suggestions that are marked as an answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Winapps/getting-error-messageyour-media-usage-rights-have/54bfacbb-C104-4c22-800F-f293d18d94c2

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/constantly-getting-this-message-your-media-usage/840c560d-04aa-4ae2-aed0-59022cfdef04

  Please let us know if the problem still persists.

• Can we can implement App - V license with the SMB file streaming

  Hello

  We are currently in place a complete infrastructure of App-V 4.6 SP2 in our Organization, and we have all applications stored in a SMB file server. We have two App - V Management servers related to a balancerto load. In addition, we have configured the ApplicationSourceRoot registry key in the machines of Client pointing to the SMB file server. The flow of applications successfully from the SMB file server. So far everything was fine.

  However, when we try to implement the licensing options we see that App - V licenses work with RTSP protocols. In addition, we tried all the best we can, but we could not implement RTSP streaming from a SMB file server.  Protocol of RTSP protocol leader changes: / / with the use of the ApplicationSourceRoot registry key.

  Can anyone suggest a work around for this problem, where we can implement App - V license with the spreading of the SMB file?

  Thank you

  Arun

  Arun

  Server issues should be placed here

• Solution campus 9.0: can implement us SetIDs 2 levels, because tree SetID conflicts with SetID Campus?

  People,

  
  Hello. I implement 9.0 Campus of a University with 4 campuses: Campus_USA, Campus_Canada, Campus_China, Campus_UAE.

  
  For financial information, I set up each unique SetID for each campus: SetID USA, SetID CAN, SetID CHN and SetID UAE respectively. I create departments, programs, careers and other levels for each campus with its unique SetID. Each campus runs correctly.

  
  But I face SetID problem in tree for 3 trees as Manager below:

  
  First of all tree: ACAD_ORGANIZATION

  This tree has no need of a SetID. I create all the academic organizations for each campus separately with its related SetID. I attribute all academic organizations with 4 SetIDs in the tree of the ACAD_ORGANIZATION successfully. The tree works properly.

  
  Second tree: REGION

  This tree requires a SetID and only can be a tree AREA and may not have many trees with the same name of REGION.

  I attribute areas of recruitment for each campus. Each campus has its unique SetID. If I use one of the SetID Campus to expand the tree in the REGION,

  the tree only can encourage the recruitment of the SetID campus areas and cannot encourage sectors of the other campus recruitment.

  So, I assign a universal SetID WorldWide for the REGION of the tree and create areas of recruitment for all campuses with SetID WorldWide for the tree in the REGION. I have run the region SetID Effdt AD505 process successfully.

  
  But on the Navigator student recruitment > student recruiters > create/update recruiters > recruiter page, the quick region field regions table has no data because SetID Campus is not the same with tree SetID WorldWide in the REGION.

  
  The fast table is a view SQL REGN_SCRTY_VW. I ran the SQL view at the SQL level database > successfully and 9 rows of data to return.

  
  Third of the trees: DEPT_SECURITY

  This tree to confront the same issue SetID with tree of the AREA.

  
  For financial reporting purposes, we need a unique SetID for each Campus (USA, CAN, CHN, UNITED Arab Emirates).

  
  My questions are:

  First of all, is it possible to make the REGION and DEPT_SECURITY without SetID tree as the tree of ACAD_ORGANIZATION?

  Second, we can implement SetID level 2 which is a universal SetID WorldWide for tree, then the single Campus SetIDs pennies in the world?

  
  Thanks in advance.

  People,

  Hello. The problem is solved by myself.

  I use a universal SetID worldwide for all campuses which is the same SetID with tree AREA and DEPT_SECURITY.

  the two trees run properly now.

  Thank you.

• How we can stop to generate multi invoice to receive a delivery ID?

  Hello Experts,

  How we can stop to generate multi invoice to receive a delivery ID?

  Hi SwanandP,

  To generate an invoice by delivery, the profile number "method of numbering to the invoice of OM:" must be set to 'delivery name '.  This will cause all lines shipped in executing even expect of each other for billing, and all lines will be on the same Bill.

  Concerning

• The implementation of generator of random when password the user is created using recon trust in OIM 11 g R2 PS3

  Hello

  Event handlers in the process pre don t work with recon trust in OIM 11 g R2 PS3. In our scenario, we want to create the user using recon trust and need the password to be generated randomly for the user created through trust recon.

  What is the workaround that can be implemented.

  Help, please.

  Thank you

  Sahana

  Post event handler process on the user object to create a new action. Set the order after the current ootb event handler that generates the default.

  -Kevin

• I can implement using the NOR-6221 SPI? When I try to generate using ctr0 make an error indicating 'Sample clock' is not a supported option.

  I'm trying to use a NOR-USB-6221 to implement SPI in a C++ application.  When I try to configure a digital output task that uses ctr0 as the clock, I get an error stating that 'Sample clock' is not supported and use instead "on demand".  I would be able to use the NOR-6221 and if so how to do this?  Thank you.

  Hi IntAndTest,

  Maybe silly question: are you sure that you have a USB-6221 and not a USB-6212? The USB-6221 supports clocked DIO, but the USB-6212 is not working.

  A problem with your code: when you specify a terminal DAQmx name, it must be is compared to the device (such as 'Ctr0InternalOutput', "AI/SampleClock" or "PFI0") or contains a slash before the device name (like "/ Dev1/Ctr0InternalOutput", "/ Dev1/AI/SampleClock ', or ' Dev1 / / PFI0"). This does not apply to the names of physical channel (like ' Dev1/port0' or "Dev1/ctr0").

  The error is returned from code that you have not displayed? Your says error message DAQmxCreateDIChan failed, but the code you posted does not call this function. In addition, I don't see a call to DAQmxStartTask or DAQmxWriteDigitalU8, U16, U32, whatever.

  Also, what NOR-DAQmx version are you using?

  Brad

• implementation of generator electric automation in labview

  I'm a grad student. I am doing my final project on automation of generator.

  my project is->

  I want to view, input voltage (mains voltage), temperature, fuel level, current load. If the supply voltage is interrupted, it automatically goes to the other power to start the generator. Now he's going to keep the generator temperature detection. If it exceeds 50 degrees celcius then generator will be automatically stopped. If the fuel level is below certain level, then it will sound the alarm. At the same time, I want to display the fuel level and temperature on the LCD.

  It comes to my project.

  I want to ask can I implement this project using the FPGA and LABVIEW?

  What devices I have to buy for this (FPGA board)?

  about, what will be the cost of Board and sensor devices?

  Help, please. I'll be very grateful to you.

  I agree with Smootastic, but NEITHER will not be able to provide everything you need to make all these measures.  You talk about a wide range of sensors for all these tasks.  You will need of thermocouples and RTD/themistors for measurements of temperature (see www.omega.com or www.marlinmfg.com), you will need a level indicator (Omega, Newark, Allied Electronics, etc.) and ammeter with alarm output (Grainger? McMaster Carr?).  You have a catalog to search for.

  I don't know FPGA is needed to do this, have you considered Compact Fieldpoint?  Your rep OR can advise you better.

• Implementation of the Suggestion for hardware OLIVIER

  Hi all
  
  We will implement analytic OBIA for Oracle Financials R12.1.3 and Procure and spend analytical.
  
  Source database will be E-Business Suite R12.1.3 where Oracle Financials and acquisition Modules are already being implemented.
  
  We'll go with the last product of press i.e
  
  OBIEE 11.1.1.6.8 (so far)
  OLIVIER 7.9.6.4
  Informatica 9.1 HF2
  DAC 11g.
  
  Number of users for EBS will be about 500 and number of users for OLIVIER will be around 100.
  
  I need suggestions on the material. What will be the hardware recommended with above products.
  
  There will be more good if you suggest BONE recommended for specific products as well.
  
  Here is my own suggestion.
  
  There will be a total 4 servers.
  
  1 OBIEE with 16 GB of Ram and 2 x 3 GHz processor, 400 GB hard drive
  2 Informatica/DAC server with 12 GB of Ram and 2 x 3 GHz processor, 400 GB hard drive
  3 Informatica/DAC servewith 8 GB Ram and 2 x 3 GHz CPU, 200 GB hard drive
  4 Dataware House with 8 GB Ram and 2 x 3 GHz processor, 5 TB hard drive
  
  My suggestion would be more or less on the limits. as I do all of this as a guess.
  
  Yet is there any method to calculate the sizing of the equipment?
  
  Thank you
  Naeem Akhtar

  Hello

  As Abhishek Anand says there is no need to have a server for Informatica / DAC client - Client tools can be installed on the laptop.
  I think that configuration OBIEE OBIEE is very good (16 GB, 6 CPU) but your database does not respect the requirement (Minimum recommended: 8 cores minimum CPU - RAM: 8 GB - your configuration: 6 processor cores, RAM: 8 GB).
  You can add more CPU and RAM on your configuration (ex: 8 CPU - 16 GB of RAM).

  For a study of sizing on your environment OBIA, you must contact an Oracle sales.

  Best regards

  Benoit

• Random generator No.

  Hello

  I'm new to Flash and AS3 and I tried to create a random number generator. I have included the code at the end I have a button to generate the number and a 'exit' called dynamic text box in which to display the number.

  However, when I click on 'generate', I get the error message-> "1067: Implicit coercion of a value of type uint to type String unrelated."

  I guess that means that Flash cannot display the number as a string, but is there a way I can do this? Or something that I left out? You can convert a data type to another? I know that you can convert String into numbers, can you do the reverse?

  Thanks for any help

  CODE:

  package

  {

  import flash.display.MovieClip

  import flash.events.MouseEvent

  SerializableAttribute public class Main extends MovieClip

  {

  public void Main()

  {

  generateButton.addEventListener (MouseEvent.CLICK, onGenerateButtonClick);

  }

  function onGenerateButtonClick(event:MouseEvent):void

  {

  var randNum:uint = Math.ceil (Math.random () * 100);

  output_txt. Text = randNum;

  }

  }

  }

  You can cast randNum string or use:

  package

  {

  import flash.display.MovieClip

  import flash.events.MouseEvent

  SerializableAttribute public class Main extends MovieClip

  {

  public void Main()

  {

  generateButton.addEventListener (MouseEvent.CLICK, onGenerateButtonClick);

  }

  function onGenerateButtonClick(event:MouseEvent):void

  {

  var randNum:uint = Math.ceil (Math.random () * 100);

  output_txt. Text = randNum.toString ();

  }

  }

  }

• Randomly generate the special characters

  I want to generate random password which should include at least one special character that could be any special character except @. dbms_random. String ('p', 1) will give 1 printable character that could be all in uppercase or lowercase, or any numeric value too. But how can I generate just 1 special character (with the exception of the @)?
  
  
  Thank you
  
  Published by: user5406804 on November 4, 2009 05:50

  Hello

  Welcome to the forum!

  You can do something like this:

  SELECT     SUBSTR ( '!#$%^*:;,.'               -- list all special characters here
                 , dbms_random.value (1, 11)     -- 11 = 1 + number of special characters
              , 1
              )     AS special_char
  FROM     scott.emp
  ;
  

• Number of random generator help

  I created a generator of random numbers with this code. The idea is that a number is introduced into the EntryText and a random number is chosen between 1 and the value of EntryText.
  
  "" ResponseString =:
  TempString: = LowerCase (EntryText)
  ResponseString: = (number: = Random (1, TempString, 1)) ^ return
  
  Is it possible that I can improve it so that:
  a. once a number has been selected, it will not take again?
  b. instead of display an imbue at one time, a whole list of numbers appears in the range between 1 and the value of EntryText. For example, if the value of EntryText was 5, the list might be:
  3
  1
  4
  5
  2
  

  Given that the space varies in fact (i.e. for a given result, there may be
  groups of different sizes), it is probably better to specify the number of
  groups instead, then maybe something like:

  TempString: = "15".
  numgroups: = 5

  t: = Number (TempString)
  [randomlist: =]
  Repeat with j: = 1 to t
  AddLinear (randomlist, j, Random(1,j,1))
  end repeat

  "" ResponseString =:
  a: = 0
  b: = t
  Repeat with j: = 1 to t
  ResponseString: = ResponseString ^ randomlist [j]
  a: = a + numgroups
  If a > = b then
  ResponseString: = ResponseString ^ return
  b: = b + t
  on the other
  "" ResponseString: = ResponseString ^ ' "
  end if
  end repeat

  Chris Forecast