We can install the EBS modules selectively

Similar Questions

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• After scoring in XP, get message "re - install the suite module in your system 32 directory: Comm. DRV.

  After the signature in the following message appears: re - install the suite module in your system 32 directory: Comm. DRV.  In the banner of the message box appears the following: NTVDM kernel: module system for the 16 bit missing.  When I close this box and open a Web screen, the screen is unstable.  No kids around to solve the problem.

  * original title - don't know how to do the following message; "Re-install the suite module in your system 32 directory: Comm. DRV."

  Well, it could be that Support Engineer experts who are hired by Microsoft do not know how to use Windows SkyDrive...

  Take a look in your c:\windows\system32 folder and see if the comm.drv file is missing.  If is missing, it might have been quarantined (actually deleted) by your unspecified antivirus/antimalware application.

  If the file is missing, it is up on my SkyDrive, you can download.  Here's how:

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  As the comm.drv does not fall into the field of the Protection of Windows file, there is no need to put a copy in the c:\windows\system32\dllcache folder, but you can if you wish.

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called comm when the name of the file should really be called comm.drv (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the files downloaded to the appropriate on your system folder.

• Bridge cc 64-bit, cannot install the output Module, help

  Hello

  Why is so hard to install the output module

  I've done all Install Adobe Output Module

  and when I close the bridge and restart it asked me if I want to add the output module, I asnwer Yes

  I have the outpot workspace, but when I click on it, nothing,

  I tried to delete the files in the output module, load brige cc, close-> re - install the output module

  nothing that I can not have the module output

  Why is so hard to leave work?

  can I ask?

  do you not reset preferences could help?

  in this case, how can I save them?

  I have run the last version of bridge cc, cc of photoshop 64-bit w8, 1 pro 64-bit

  Thank you

  Hello

  After reading the Forum without luck

  I found the solution at least for windows

  inside the AOM_Package_Win64 in my case because I installed only fill 64 bit

  There are

  Adobe output module

  AdobeOutputModule.workspace

  copy/extract the folder Adobe Output Module-> Extensions from C:\Program Files\Common Files\Adobe\Bridge CC

  copy/extract the AdobeOutputModule.workspace file-> in C:\Program Files\Fichiers Files\Adobe\Bridge CC Extensions\Workspaces

  
  

  launch bridge

• I have the version of visual studio 2010 ultimate and aparently there is a beta version of it 2011 and I would like to know if I can install the ultimate version 2011

  Hello, I have the version of visual studio 2010 ultimate and aparently there is a beta version of it 2011 and I would like to know if I can install the 2011 ultimate overwrting the 2010 release of visual studio 2010 ultimate version. should I uninstal it manually first? (even if I deleted the main application, some remained after) what should I do? I need help with this problem because I don't know if I need to uninstall the version of 2010 in order to install the new 2011 beta version or I just have to update like a normal program?

  Hello

  You'd be better suited post directly in the Visual Studio Forum for your questions.

  "" Installation and configuration of visual Studio".

  http://social.msdn.Microsoft.com/forums/en/vssetup/threads

  See you soon.

• I need the fix for win Xp Sp2 can install the HD Audio Device codec

  I need the fix for win Xp Sp2 can install the HD Audio Device codec!

  I has this fix and I lost it...

  It is contains (patch 3)

  can u please help me and give me the link of this hotfix

  Could be the fix. Looks like he helped other people with the same device.

  http://support.Microsoft.com/kb/888111

  If this isn't the case, I can continue to dig.

• Reference Dell printer725, can install the printer on windows 7

  can install the printer on windows 7

  We can found the driver?

  Tuesday, October 16, 2012 20:43:30 + 0000, kampen zhvan c n says:

  can install the printer on windows 7
  We can found the driver?

  If a Windows 7 driver exists (if it's an old printer, a Windows 7)
  driver exists may not) you can find it on the Dell web site.

  Ken Blake, Microsoft MVP

• Hello, I would like to know if I can install the software on several computers with my creative cloud. Thank you

  Hello, I would like to know if I can install the software on several computers with my creative cloud. Thank you

  Hello

  You can install and activate creative Cloud on two computers applications, regardless of the operating system of the individual associated with the composition of the creative cloud. See the page of the product license agreements for more information.

  Link: http://www.adobe.com/in/products/creativecloud/faq.html#what-cc

  Let us know if this helps!

• I installed the creative cloud on 2 PC and now I've lost one, I can install the cloud on my new pc?

  I installed the creative cloud on 2 PC and now I've lost one, I can install the cloud on my new pc?

  you don't know.

  Just install the desktop application cc from here on your new computer, https://creative.adobe.com/products/creative-cloud

  When you sign in with that, asked you logout of your other computers.  agree and your lost computer will be eliminated signed.

  of course, you'll also sign on one of the computers that you have, but when you use your programs adobe on this matter, you will be asked to sign-in.  do it and're you good to go.

• My computer is fried. I want to make sure that I can install the Creative Suite 3 on the new computer I buy.

  My computer is fried. I want to make sure that I can install the Creative Suite 3 on the new computer I buy. I plan to get the same computer as before, a Mac 10.4.11 Tower installed on it.

  Thank you!

  If same os, not a problem.  (though you might need an activation count reset if you will exceed your two activations.)

  If you need installation files

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • Premiere Elements: 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 12 | 11, 10 | 9,8,7
  • Lightroom: 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• Cannot install the EBS 12.1.1

  Cannot install the EBS 12.1.1 on Windows Server 2003 with Visual Studio 2008 and cygwin 1.7.9
  the 11301130.log shows:
  
  ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
  
  ------3% complete RC-50004: Fatal: error in ApplyAppsTechStack:
  
  RC-50013: fatal: failed to instantiate the driver C:\oracle\PROD\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
  C:\DOCUME~1\ADMINI~1\CONFIG~1\Temp > if 1 == 0 goto: REG_OK
  C:\DOCUME~1\ADMINI~1\CONFIG~1\Temp > echo cannot run the registration of applications Techstack
  Cannot perform registration of Applications Techstack
  C:\DOCUME~1\ADMINI~1\CONFIG~1\Temp > if "" == "TRUE" goto: INSIAS_OK
  
  RW-50010: error:-script returned an error: 1
  RW-50004: Error Code when you run the external process. Check the log file for more details.
  APPL_TOP install the driver for the PROD instance running
  Please see the remaining newspapers on the applications node to-C:\oracle\PROD\inst\apps\PROD_moc\logs\11301130.log
  
  /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
  
  This occurs in step 3 of 5 of the installation
  
  Help me please.

  Have you tried to start the services and see if it works?

  AutoConfig is completed successfully?

  Thank you
  Hussein

• want to go down and install the ebs applications

  Hello

  Mind please my ignorance, I'm new to oracle ebs applications and you want to download and install it on my test machine which is Linux.

  I want to know where I can find the apps, what to download (there is so much) and how to install them.

  I need the following application
  Oracle financials
  EAM
  CRM

  I would really appreciate your help

  concerning

  Nick

  SANAE

  What is the difference between the two versions.  Please suggest?

  also suggest materials to learn the inventory module of BSE (need over the next three weeks).  Please suggest a book with the technical and functional aspects.

  concerning

  Nick

• Help to install the OUTPUT MODULE

  I installed the download of the bridge OUTPUT module, following the directions on the adobe Web site.  The name of the module is displayed at the top right of the screen, but nothing happens when I click on the name.  I put the module folder in the folder ~/Library/Application Support/Adobe/Bridge CC location.  I could not find a file Extensions bridge CC.  I THINK I PUT IT IN THE RIGHT LOCATION.

  So, if you want to use a particular version of Photoshop open.  Then to open CC bridge or Bridge CS6 with Photoshop still open on your windows machine.   When do you a bit in the bridge who want to invoke Photoshop. Because Photoshop is open this version must be used.  However there are some problems with the interface of bridge ScriptTalk.  I rarely use the bridge.  I use it only for editing Image files metadata and framework of RTAs for groups of RAW files, that I select in the bridge. I have a process and synchronize the setting for others. with the exception of the cultures that are individually.

  I normally just use Photoshop and windows dialogs and Windows File Explorer.  I do not like Lightroom or bridge for file management, you can keep system of library in Lightroom and Bridge caches.  File Explorer is all I need.

• Not able to install the common module on satellite Pro A120

  Hi guys:
  I recently reinstalled xp professional on my satellite pro A120. I could download and install the main drivers of http://uk.computers.toshiba-europe.com and my phone is functional. However, I did not all sounds and (F6 & F7 and toggle) function keys not working, even after insalling the sound card. I read some of the posts on this forum and found that I needed insall the 'common' module to make them functional. I downloaded the driver from module common too, but when I run the Setup it starts initially, but fails both the configuration is complete.

  The same thing happens also with a few other drivers as saver of energy etc... I was not able to run the Setup program for the common module & driver power saver, basically, nothing happens after I have the respective installation.

  Can anyone help please?

  Pravesh

  As far as I know on the download page you can find the installation instructions with exact installation document order how to install drivers and tools specific to Toshiba and utilities.
  You have installed all the stuff after this installation order?

• Install the EBS in a laptop

  Hello
  I'm a consultant, I would like to implement EBS in a computer laptop or computer, to perform the test, train myself, etc... I would like to receive feedback on the steps, in internet, there are different sources, but it is unclear if, for example:
  
  1. first create a virtual machine
  2. install Linux
  3. install the database
  ...
  
  I don't know what are the steps and the order.
  
  Thanks in advance.
  Javier

  I'm a consultant, I would like to implement EBS in a computer laptop or computer, to perform the test, train myself, etc... I would like to receive feedback on the steps, in internet, there are different sources, but it is unclear if, for example:

  1. first create a virtual machine
  2. install Linux
  3. install the database
  ...

  I don't know what are the steps and the order.

  Post the details of the release of EBS and OS to use so we can advise you.

  If you want to install on Linux/Windows directly (as long as the operating system is certified), then just do the install on the operating system. If your OS is not certified with the release of EBS you install, you must create a virtual machine and install a supported operating system and then installing on the guest operating system.

  Thank you
  Hussein