We get an error "(4) Series Chipset processor e/s" after getting into the computer

Similar Questions

• I had to re install my vista from a backup I did earlyier and he does not remember what my password was at this time and he can't get into my computer.

  I tried to upgrade vista ultimate to 7 ultimate and never managed to do work he kept crashing until I installed it (I tried about 6 or 7 times). I then went back to vista and had to reload from a return upwards I had done. now, I can't connect to my computer all it says is the wrong password and I tried all the passwords that I can remember. I changed my password often due to having older children who want to bypass the parental control. can anyone help me to get into the computer or I have to formatt and start over?

  If you have a Vista DVD disc or repairs, the following tutorial might be able to help, as much >
  IMPORTANT NOTE: this works in cases where you changed your password to something new and then has forgotten or deleted a user account by accident. So that this works, there must be a restore point from the system during which logging has managed for the account of the problem.

  Here is the link:
  http://www.howtogeek.com/HOWTO/Windows-Vista/how-to-regain-access-to-your-administrator-account-in-Windows-Vista-using-system-restore/

  Case of failure of the foregoing, we are not allowed to help users to bypass the password protection, regardless of what are "reasons".
  Here's the Microsoft Policy on this issue: Microsoft's strategy on getting Areound passwords

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed.

  After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed" can someone help me?

  Hello

  Some research suggests that ProfileCnt.exe belongs to a wireless card or

  Ethernet card.

  Work using the boot minimum troubleshooting to identify the troublesome program,

  then uninstall/reinstall this program.

  331769-how to perform a procedure to clean boot (XP & Vista)
  http://support.Microsoft.com/kb/331796

  Alternatively, looking for C:\Program Files for the file ProfileCnt.exe can tell you

  What program is involved.

  Don

• Satellite Pro 6100: cannot get into the BIOS and does not start

  I have a portable Satellite pro 6100, en I was trying to boot from an external USB hard drive. When I activated the second hard drive option in the BIOS it has stopped booting all in all, I can't even get into the BIOS Setup more. All I get is "In touch with tomorrow TOSHIBA" screen with the icons to select the method of priming preferred manually after it's just blank screen with a cursor blinking in the upper left.

  Press ESC or F8 before to turn usually results in fast beeps sounds.
  Press tilde (~) before turn is reflected in the remaining space screen (not even the home toshiba screen appears) and slow Zens sounds.

  Apart from that I can't really do nothing at all.
  I tried to reset the BIOS by disconnecting the battery CMOS/RTC (hoewever, we call it) of the motherboard for a while with no results.

  Turn on/off without the results of HD internal in a white screen with an ERROR 'IDE #0.
  I can always stop by pressing the power button, you don't have to bother on the external hard drive it past I don't even want it works more.

  Suggestions?

  Hello

  I agree with Graeme. Your HARD drive is probably faulty. Sorry, but I don't think that you will be able to use the external HARD drive. The option in the BIOS is not for EXTERNAL HARD drive is just, I guess, for disk HARD placed in select Bay.

• Occult video BIOS BIOS occult system and I cannot get into the bios?

  IT SAYS: System hidden BIOS Video BIOS with a shadow and I cannot get into the bios?  WHAT CAN I DO

  Hello

  Why you try to go into the BIOS (Basic Input Output System)?

  For the problem with the BIOS (Basic Input Output System), I recommend you contact the manufacturer of your computer for help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information.

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• As soon as I get on the computer it is something, don't know what it is, how to stop?

  Original title: computer

  As soon as I get on the computer it is something, don't know what it is, how to stop?

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  3. do you receive any error messages?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  You can also view the programs that load at startup.

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance#section_2

  It will be useful.

• HPE-210y; trying to get into the advanced settings of the bios to change the setting of the fan

  Hello

  Model # HPE - 210Y

  Product # BK170AA-ABA

  BUILD with ID AINAv6PRA6

  CARD MOTHER-HRS880-ΜATX

  BIOS VERSION 5.09 22/01/10

  BASIC 08.00.15 VERSION

  I have a small problem when I start my computer it gives me an error: System fan has failed. Press F2

  Well my system fan works very well done any tests on old tried on slow corners fan connector

  another connector revved at full speed. I reset CMOS changes that the battery took all the memory, video card

  and everything cleaned with air. the usual steps.

  I asked around and technicians say the problem could be in the bios settings of fan cpu (quiet mode). Everyone says

  Press f1 or f10 to get into the bios Setup. go to the Advanced tab and scroll down. but for the life of me I can't find it. I know my computer if it is safe, but it's a pain to have to press f2, whenever the computer must restart

  If anyone can help pleaseeeeee

  Thank you

  Hello

  lonee37 wrote:

  Hello

  first of all thanks for the suggestion about the Nice program trying to core temp

  I replaced the temp of problem system always the same fan has not gone above 73 F

  so I guess I'll have to talk to HP to get it solved

  

  Thank you once again for youy help

  Thaose temperatures very well. Does not even begin to worry until you start to see time @140 degrees F.

  That's well below Tj Max.

  I used to use centigrade. If the temperature is close to that you certainly can't expect much better than this.

  Best regards
  ERICO

• Cannot get into the BIOS on my Sat A30

  Hi all

  I have problems to enter the BIOS. I heard when I want to get into the BIOS I have to press the ESC key when Toshiba logo is shown in the startup.

  But nothing happens!

  Could someone help me?

  Sammy23

  Hi Sammy23
  That is right. It's actually the ESC you press. But there is more to know. During the time where appears the Toshiba logo, that represents about 1.5 seconds or so machine "listens" for the ESC at the beginning.
  Means that you have to be quick like a cat to press ESC. I usually press ESC several times all the way to the market (until the Toshiba Logo is displayed). Try this. Another way to get into the BIOS uses Toshiba HWSetup (looks like a key any) in the in the Windows Control Panel. You can access almost all the parameters of the BIOS from there.

  BR

  Tom

• Portege 7200: Hot to get into the BIOS?

  Hello

  How is it possible to get into the BIOS in Portege 7200?

  Thank you!!

  Harry

  Hello

  I found the same info. Press the ESC key just after switching on the device.

• Re: Satellite C850D - impossible to get into the BIOS

  I'm unable to access the BIOS on this machine. I tried (a number of times) by pressing the FN and F2 and FN and F12 keys while the Toshiba logo is displayed. Unlike the Satellite A500, I have, no prompt for keys F2 or F12 doesn't appear at the bottom of the screen showing the Toshiba logo.

  I tried F2 and F12 keys without the FN key, but still no result.

  I need to be able to boot from the CD drive, but cannot get the BIOS to add this record to the boot sequence.

  Help pls.

  Rod.

  If you use Win8 you must make full stop at first. How to do that you can read on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  After the full stop restart your machine and press F12 to get into the boot menu. There, you can choose which device can be used as first boot device.

• Cannot get into the BIOS on my Portege R700

  Hello friends,

  I have laptop Portege R700-1321.
  1 year a go, I was updating my version of BIOS to 2.20 and after that I have cannot get into the BIOS!
  try a passer-by but noway :(

  When you press F2 after you restart the computer nothing add and put it back again.
  try to change ro F10 boot order but still just restart :(
  I need to change the boot order to install the new OS fresh and of course my BIOS setting.

  Please help me.
  If any body had a same problem or know how to fix it :(

  First of all you n t need to change the boot order in the BIOS if you want to reinstall the new system.
  You can press F12 all turn on/off the unit.
  Then a menu should appear where you can change the boot device.

• Tecra8000 - keys to get into the BIOS?

  Hi all, I am German, sorry for my English!

  I have a tecra8000 with win2000, but I lost my password, I'll install windows xp home edition now, how can I get into the bios. Wich keys must I push wen the computer is in boot mode?

  Thank you

  Leo

  Hi Thomas,

  The normal to access the BIOS path will be to press ESC then F1 during startup. This will give you the BIOS menu. Some laptops use ESC to show the progress of the POST and F2 to enter the BIOS menu.

  F8 will allow you to start in safe mode.

  F12 to select boot device (disk, CD, etc.).

  HTH

• I can't get into the bios

  When I restart my laptop I have the HP logo with the small "leak of press to enter the boot menu. Usually, when I press ESC at this stage, it gives me options to go into the bios, change the boot order and enter the Recovery Manager.

  But earlier when I try to do it, by pressing esc it will start in the windows Boot Manager, giving me the boot options in windows or to do a test of memory and I don't see any option to get into the bios!

  Laptop model: HP Pavilion dv6 3030ee!

  OS: W7Ultimate Bit

  Please someone help me with this problem!

  Thank you

  Finally I solved it! I just took the battery and put it again! then my cell phone is ok

• T530: Cannot get into the bios

  Hello.

  The issue of this link does not seem to be solved with the last update of the BIOS (or it's a similar question).

  I'm running 2.04 and since I have set to UEFI boot only I can't get into the BIOS. When I press Enter to interrupt normal startup the screen goes black, it seems to interrupt the boot but nothing looms on the screen. Starting continues after a few seconds (I guess that after the time-out of the screen of the interruption).

  There seems to be a problem with the code modesetting, because if I connect to an external monitor to the VGA port everything works correctly.

  Note that what is happening with optimus, as well as with only the active Intel card.

  Thank you.

  This seems to be fixed with the last BIOS update (2.07).

  Although a little more comments would be welcome.

  Thank you.