We get an error "D: / is not accessible." a device i/o error"when trying to access hard drive
* Original title: e/s problem
I am not able to access my hard disk.windows that says: -.
"D: / is not accessible." an i/o device error. "
I also tried chkdsk but it says that it is not directly operatable.
Hi Rishanpc,
Thanks for the post. I am sorry to hear that you found a mistake "D: / is not accessible." a device i/o error"when trying to access hard drive.
I imagine the inconvenience that you are experiencing. I will definitely help you with this.
To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:
1. have you checked if the cables are connected properly?
2 what is an internal hard drive or external?
3 have there been recent changes made on the computer before the show?
The most common cause of a non-accessible i/o error is a disconnected cable. When the computer tries to access a device, and it's no response after several tests, it will generate this error. Another common cause is when a program tries to access a file that has been removed or eliminated.
Disconnected Hard Drive/cable misconfiguration
Internal hard drives require a specific set up. IDE hard disks can have only one master. If another hard drive has its defining together correctly pin code, a user is perhaps not able to access the data, and he will receive a message that the drive are not available. Cables come off inside the case of the computer also cause a not accessible i/o error. The user can correct this problem by opening the case and attach the data cables for each drive safely at the back of each drive and the motherboard.
You can follow the steps below and check if it helps.
a. go to "Control Panel" in the start menu and choose 'performance and Maintenance '.
b. click on 'System' then go to the Hardware tab and click on "Device Manager."
c. find the device that records an error by developing the appropriate category nodes. If the device has a red "X" on the icon beside its description, the hardware is disabled; Go to step d to activate it. Otherwise, go to step e.
d. go to the general tab and click on "Activate the device" found in the device status section. then press 'OK '. (Note: you may need to follow the guests, as indicated via an assistant of favorable device.) If you do, continue to click "Next" and follow the instructions until the process is complete.) Test the equipment. If an error is displayed, go to step e.
e. click the general tab and click "Troubleshooting" found in the device status section and then press 'OK '. Follow the prompts to fix the problem. If an error is still displayed, go to step f.
f. click the driver tab and click on 'Update driver'. Follow the instructions until the process is complete and then to test the equipment.
Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.
Tags: Windows
Similar Questions
-
404 error when trying to access help online in EMP 11.1.2.3
Hi all
I try to access using the line (by pressing F1) at EMP 11.1.2.3 but I get the following error:
Also, I get this error when trying to install a client tool such as customer of HFM to tools-> Install-> HFM Client for 64-bit.
Anyone help on this?
Thank you
To the right...
It was just to create the path of access/workspace/static/hfm/and put the customer's installation and it worked.
-
First of all, I got a new game called (2 prototypes) the game was working fine then when I tried to run 2 days after installing... I got an error message saying XAudio2 is not found. Please re - install the game and install him required DirectX 9 provided .0c or get the latest version of Microsoft and the game works without noise... I re-install the game, but the same problem appearing Dungeon, which is why I tried to install the latest version of directx, but during the installation of directx, I got another error message saying (xAudio2_3.dll is not designed to run on Windows or it contains error) I tried to fix it by doing the registry repair , but it did not work so someone can tell me what is the problem and why it work well before then I got this error without changing anything!Here, any help would be helpful thnx in advance :)
Hello
Please contact the developer to check whether the game is compatible with Win 7 or not, since we have no information concerning its compatibility.
Windows 7 Compatibility Center
Try to install the game in compatibility mode and check. Give the link.
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
Check the version of DirectX to the computer referring to this article:
http://Windows.Microsoft.com/en-us/Windows7/which-version-of-DirectX-is-on-your-computer
Diagnosing basic problems with DirectX
http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX
See the article on how to solve the problems of the game performance:
The problems of the game performance
http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems
It may be useful
-
Cannot start. Don't get the error "no boot sector on hard drive internal.
Original title: computer does not load.
After that I turned on my laptop (windows XP) I get a black screen saying "no boot sector on hard drive internal" "no devices bootable-strike F1 to retry boot, F2 for installation; After pressing F1 displays the same screen and if I press F2 Setup screen appears and then I'm lost. Help please!
Hi Jose_luna47,
- Did you the latest changes on the computer?
- When was the last time it was working fine?
Method 1
I suggest that you perform chkdsk analysis on the computer to check and fix the errors on the hard drive by using the recovery console.
Chkdsk
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/chkdsk.mspx?mfr=true
How to install and use the Recovery Console in Windows XP
http://support.Microsoft.com/kb/307654
Description of the Windows XP Recovery Console for advanced users
http://support.Microsoft.com/kb/314058
Method 2
If the previous step fails, then you will need to check the settings in the basic input/output system (BIOS) and you need to contact the computer manufacturer for help with basic input/output system (BIOS).
Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
-
I get an error when trying to update my CS5 Design Premium Suite
Hello
I bought a license for Adobe Design Premium CS5 5.0 Win. For some reason any when I ran an update it gave me an error during installation. My goal of installing this version is because when I opened an extension .eps .indd file I get this error.
For the .eps files, I get this message:
The inDesign file, I get this message:
Can someone help me with this? IM thinking the outside designer uses CS6 and we have CS5. What is the question?
Yes, it is possible that someone sends you files create with cs5 + versions and, if that is the problem, update will not help.
That said, you should be able to install the latest updates of cs 5 by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/
-
Mac, get the 1 configuration error when trying to open external drive re-installed files
Recently, I had to do a clean install from my computer and tried to run my Adobe applications after installation from a hard drive backup. It continues to give me 1 Configuration error. I tried to take a different route and use my serial number to activate Adobe Acrobat X Pro and my serial number will not work for free download.
I downloaded a copy of the University of Adobe Creative Suite Design Premium CS5.5 in September 2011
http://helpx.Adobe.com/Creative-Suite/KB/CS5-5-product-downloads.html
Mylenium
-
PDFDoc.dll 126 error when tried to access MyScribe
Original title: pdfdoc.dll error 126
When I tried to down load the new version of the software school myscribe it corrupted my registry and I am can't access myscribe and get an error pdf.dll 126 and must remedy before that I can download the new version and the old version is not available.
Can you help me?
Hi Gregory,
We recommend that you reinstall Adobe reader as well as MyScribe and check the result.
See Download Adobe ReaderImportant: Install non-Microsoft programs is at your own risk that Microsoft has not tested this software for their best feature.
For more technical support options, get in touch with theMyScribe Support Team
Visit ourMicrosoft answers feedback Forum and let us know what you think.
-
Administrator account is disabled - system 5 error when trying to access
So I created a user account with administrator rights because I had problems with other accounts of user download of malware and viruses on my computer. Unfortunately, I've changed the password one night when I was very tired and now draws a complete blank on what it might be. Time has passed and I have tried everything I can think enough to know that I'm up a Creek trying to remember this password. After that some searching around, I learned to start safe mode to access the hidden administrator account, which does NOT produce the hidden administrator account. Then I read about access to the cmd as administrator, but that doesn't work either because he asks me the password I don't remember. If I try to run cmd with "net users administrator / Active: Yes", receives a message indicating "system error 5 has occurred, access denied. Same thing if I try to enter "net user
*", and then click the password twice to clear it. I know that I have set up with administrator access the user account is different than construction administrator b/c if I go 'lusrmgr.msc' in the search/run box on the start menu, then clicking on 'users' I can see that they are two separate accounts. When I click with the right button on the built in Admin and select Properties, it shows a check in the box "account is disabled". If I uncheck this box, I gives me the error message "access denied." If I try to go the other route and check the "account is disabled" on the user account that I set up with administrator access, I gives me the same error. If I try to delete the setting of administrator group of the user account that I set up with administrator access I'm access denied once again. All this is considered... other ideas or tips? I read somewhere that apparently since I created a user to have admin access, hidden admin is disabled by windows automatically for safety. I really hope this isn't the case! I'm very hesitant to use a tool to reset password to a third party if I have to, but I'm running out of options and it's been months. I appreciate any help, tips, reviews, etc. Thank you! You cannot administer a computer unless you are an administrator.
The built-in account is disabled if there is another admin account.
There is no way around it, or it would not be safe.
Don't forget the computers are not safe during execution.
MS sites will not discuss hacking password.
-
ProdID:V0Q01UA #ABA
Hello, so I performed a reset that restore my computer to factory settings, I have chosen to erase all files. I've done this before, and everything went well. What was going on, it was my disc useage was at 100% a lot and that something was wrong with my computer then I factory reset it. While the factory reset is 44% in "resetting your computer" and the next thing I knew I had 2 options, stop or start with advanced options. Well, I chose to stop it, 5 minutes later, I turned it back on and I ran a SMART check has no that was the ID # 9367LW-86J89N-MFPX7G-60BR3 followed by the product id that is shown above. He said that when I start to Boot Device not found, please install an operating system on your hard drive. Followed by the hard drive (3FO), I can only click f2 and it gives me the link to visit the Help Center. The computer saying that it did not have an operating system was not the first alert, that I had, it was something else saying there was an error of hard disk which then became not having not not an operting system. I tried to go to f11 and go in this way, but regardless of what it always comes back to the screen that shows the found boot device, please install an operating system. Help, please! Thank you. in advance.
He was sent to HP they will solve this problem, my warrienty coverd.
-
Error when trying to access an item in the repository through the VAC
Hello
I tried to access an item in the repository of the ACC, I receive the following error message:
Error reading the list index or a table of the database. , This means the database table holding that this property has sequential whole not starting with 0 in multiple columns. This only happens if the database table has been modified directly (outside of Dynamo).
java.lang.Exception
at atg.adapter.gsa.ListTable.loadHelper(ListTable.java:190)
at atg.adapter.gsa.ListTable.loadProperties(ListTable.java:97)
at atg.adapter.gsa.GSAItemDescriptor.loadProperties(GSAItemDescriptor.java:5874)
at atg.adapter.gsa.GSAItemDescriptor.loadProperty(GSAItemDescriptor.java:5986)
at atg.adapter.gsa.GSAItem.getPersistentPropertyValue(GSAItem.java:1339)
at atg.adapter.gsa.GSAItem.getPropertyValue(GSAItem.java:1232)
at atg.adapter.gsa.GSAItem.getPropertyValue(GSAItem.java:1510)
at atg.repository.RepositoryItemImpl.getPropertyValue(RepositoryItemImpl.java:151)
at atg.repository.nucleus.RepositoryItemPropertyMapper.getPropertyValue(RepositoryItemPropertyMapper.java:151)
at atg.beans.DynamicBeans.getPropertyValue(DynamicBeans.java:333)
at atg.beans.DynamicBeanState.initializeFrom(DynamicBeanState.java:152)
to atg.beans.DynamicBeanState. < init > (DynamicBeanState.java:122)
to atg.ui.repository.model.RepositoryItemState. < init > (RepositoryItemState.java:428)
at atg.ui.repository.model.RepositoryAgentImpl.createRepositoryItemState(RepositoryAgentImpl.java:2934)
at atg.ui.repository.model.RepositoryAgentImpl.getRepositoryItem(RepositoryAgentImpl.java:3901)
at atg.ui.repository.model.RepositoryAgentImpl.getRepositoryItem(RepositoryAgentImpl.java:1225)
at atg.ui.repository.model.RepositoryAgentImpl.getCompressedRepositoryItem(RepositoryAgentImpl.java:1251)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
to atg.security.proxy.UserSessionProxy$ SessionSkeletonHandler.invoke (UserSessionProxy.java:273)
at atg.rmi.context.ContextualSkeletonImpl.invoke(ContextualSkeletonImpl.java:127)
at sun.reflect.GeneratedMethodAccessor401.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:303)
to sun.rmi.transport.Transport$ 1.run(Transport.java:159)
at java.security.AccessController.doPrivileged (Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:155)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535)
to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run0 (TCPTransport.java:790)
to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run (TCPTransport.java:649)
to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:895)
to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:918)
at java.lang.Thread.run(Thread.java:662)
Corrected data type for a property change in the definition file.
-
I get 0xc000007b error when trying to open Photoshop Lightroom
I bought and downloaded Lightroom on my PC, but the program will not open or run.
Based on the user comments and suggestions, we have updated our documentation on this subject with a few new solutions.
http://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html
We are locking this thread.
If you have any other questions or still see the error, please continue the discussion on this thread: http://forums.adobe.com/message/4836005
-
Exit code: 6
Please see the faults and warnings below for troubleshooting. For example, ERROR: DW050... WARNING: DW016...
-------------------------------------- Summary --------------------------------------
-0 fatal Error (s), 15 (s), 4 warning (s)
WARNING: DW016: NOTE: cannot set the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} action Suite Shared Configuration CS6 3.0.0.0 as she is already updated by {8706963D-5F48-47CC-998B-DAB70B089DB8} payload Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: cannot set the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} action Suite Shared Configuration CS6 3.0.0.0 as she is already updated by {8706963D-5F48-47CC-998B-DAB70B089DB8} payload Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: cannot set the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} action Suite Shared Configuration CS6 3.0.0.0 as she is already updated by {8706963D-5F48-47CC-998B-DAB70B089DB8} payload Suite Shared Configuration CS6 3.0.0.0
WARNING: DW016: NOTE: cannot set the payload {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} action Suite Shared Configuration CS6 3.0.0.0 as she is already updated by {8706963D-5F48-47CC-998B-DAB70B089DB8} payload Suite Shared Configuration CS6 3.0.0.0
-Payload: {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0.
ERROR: Install payload MSI failed with the error: 1601 - the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team.
MSI error message:
-Payload: Redistributable Package from Microsoft Visual C++ 2010 {9E0AF030-AC6B-11E0-8837-00215AEA26C9} (x 86) 10.0.40219.1.
ERROR: Cannot install the Package redistributable Microsoft Visual C++ 2010 (x 86). Please try to install by double-clicking the executable file to "C:\Users\OWNER\AppData\Local\Temp\{57250072-CAEA-4E53-A6A2-EBF3C6113D75}\InDesign_8_LS16 VC 2010 Redist (x 86) \Adobe \vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x 86) Microsoft Web site - www.microsoft.com
-Payload: {9C4AA28F-AC6B-11E0-8997-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x 86) 9.0.30729.4148 -.
ERROR: Cannot install Microsoft Visual C++ 2008 Redistributable Package (x 86). Please try to install by double-clicking the executable file to "C:\Users\OWNER\AppData\Local\Temp\{57250072-CAEA-4E53-A6A2-EBF3C6113D75}\InDesign_8_LS16 VC 2008 Redist (x 86) \Adobe \vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x 86) Microsoft Web site - www.microsoft.com
-Payload: {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x 64) 9.0.30729.4148 -.
ERROR: Cannot install Microsoft Visual C++ 2008 Redistributable Package (x 64). Please try to install by double-clicking the executable file to "C:\Users\OWNER\AppData\Local\Temp\{57250072-CAEA-4E53-A6A2-EBF3C6113D75}\InDesign_8_LS16 \Adobe VC 2008 Redist (x 64) \vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x 64) Microsoft Web site - www.microsoft.com
-Payload: Redistributable Package from Microsoft Visual C++ 2010 {9D2A060F-AC6B-11E0-8C00-00215AEA26C9} (x 64) 10.0.40219.1 -.
ERROR: Cannot install the Package redistributable Microsoft Visual C++ 2010 (x 64). Please try to install by double-clicking the executable file to "C:\Users\OWNER\AppData\Local\Temp\{57250072-CAEA-4E53-A6A2-EBF3C6113D75}\InDesign_8_LS16 \Adobe VC 2010 Redist (x 64) \vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x 64) Microsoft Web site - www.microsoft.com
-Payload: {7E91BB17-16A1-42CE-9502-D6C98BE04920} PDF settings CS6 11.0.0.0.
ERROR: Install payload MSI failed with the error: 1601 - the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team.
MSI error message:
ERROR: DW050: the following payload errors were found during the installation:
ERROR: DW050:-Microsoft_VC90_CRT_x86: installation failed
ERROR: DW050:-CS6 settings PDF: installation failed
ERROR: DW050:-Microsoft_VC80_CRT_x86: installation failed
ERROR: DW050:-Microsoft Visual C++ 2008 Redistributable Package (x 64): installation failed
ERROR: DW050:-Microsoft Visual C++ 2008 Redistributable Package (x 86): installation failed
ERROR: DW050:-Package redistributable Microsoft Visual C++ 2010 (x 64): installation failed
ERROR: DW050:-Package redistributable Microsoft Visual C++ 2010 (x 86): installation failed
ERROR: DW050:-Adobe Mini Bridge CS6: installation failed
ERROR: DW050:-standard Adobe 2.0: installation failed
-------------------------------------------------------------------------------------
Try to remove this folder and reinstall:
C:\Program Files\Common Files\Adobe\Adobe PCD.
C:\Program Files\Fichiers Files\Adobe\caps.
C:\Program Files\Fichiers Files\Adobe\backup.
-
I am running XP and Firefox 3.6.16. Problem began in the middle of the day, nothing else I can do to that could have triggered it. Have restarted and who does not work either. Does not affect other sites.
This problem may be caused by corrupted cookies.
Try to clear the cache and cookies from sites that cause problems.
- "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
- 'Delete Cookies' sites causing problems: Tools > Options > privacy > Cookies: "show the Cookies".
-
I can not download on my computer beak not enough space... I tried workarounds when I googled and it is not working thank you
This particular update must be made on your computer.
-
The error reads 'an add-on of this Web site has failed.
I use the Windows 7 operating system
Browser?
Try to download and run (full) MSI installation program
Maybe you are looking for
-
The number 0003 in a small square appears in some texts. How to get rid of him?
I'm building a website and when I preview it with Firefox, a small square with the number 0003 it appears here and there in some of my text. This particular icon does not appear with Chrome and Safari.
-
Restore previous session button on "subject: House ' stops working
to clarify, I can always restore session by making history > restore previous Session but it is not as intuitive that have start to the top of page on everything: home and press just this big button 'Restore previous Session' blue It happened all of
-
Pavilion P7-1410: load and sleep USB
I have a p7-1410 Pavilion. (A) no it automatically standby if on but not in use? (B) she "sleep and charge" USB ports? (C) if B is "Yes", where the ports? Mnay thanks!
-
I4 phone serial number is located where?
I4 phone serial number is located where?
-
It's a simple little test but he drives me crazy. The first line of the output is fine, but all other lines has an extra TAB inserted at the beginning of the line. I cut out the section of the chart and the offending article of the output file. The o