We get an error "this device cannot start" Code 10 on Windows 7.

Similar Questions

• Installation of driver with PXI-8360 error "this device cannot start - Code 10"

  While trying to install PXI-6541 to the PXI-1036 chassi with controller PXI 8360 [express-8360 side laptop], the error message "this device cannot start [Code 10]" laptop is Lenovo T60 with the latest version of the BIOS

  Thank you

  Manu

  Sounds great Manu,

  I also followed on that for you, then you should be getting approval sometimes today.

  I hope for the best

• Microsoft isatap adapter, get the message "this device cannot start code 10".

  have you tried the driver from the web and update manually update but it States driver is up to date?

  Hi"

  "Description of errors related to the 10 Code that generates the Device Manager in Windows on computers"

  http://support.Microsoft.com/kb/943104

  But it's the information from Microsoft Isatap adapter:

  "On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

  http://support.Microsoft.com/kb/932520

  See you soon.

• IDT high definition audio CODEC. Error: the device cannot start (code 10)

  Original title: IDT high definition audio CODEC

  My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
  I hope this helps.

  See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot access the he DVD drive in Windows Vista. Error: This device cannot start. (Code 10)

  All of a sudden my DVD drive has stopped working. Windows Vista SP2 doesn't see it, but I can see it in the BIOS.
  Error: This device cannot start. (Code 10)
  The driver has the exclamation point. I uninstalled the driver and restarted the PC, but the system does not re - install.
  The exclamation point is up there.

  Help, please

  Thank you

  Hello

  This article can help...

  http://support.Microsoft.com/kb/314060

  Tricky

• "this device cannot start (code 10)", which means code 10?

  I was alarmed because I could stop my computer because of a 'message' came onto my computer and I was able to get off. So he would'nt stop. I was installing some new drivers with my Scanner Driver Uniblue, when this happened and so I Google'd up Uniblue to see if I could know what I could do about it, and I found there an investigation on the system cleaners and uniblue was last on their list of 5 questioned, and there were a few bad reports on this subject. I also had on my system, cure of Parelogic pilot, who had slipped completely under my guard through an email from the author of 'Math better explained', an e-book that I had downloaded some time ago and I have now seems to be a fake email because when I looked towards the top of Parelogic there was so many complainants and we even said that they do absolutely nothing positive and in fact that their objective is to implant the computers people and they must be reported to the FBI.

  In any case I finally understood how to disable the offending message. But now I'm worried about 10 network cards that have yellow triangles with! "s with the message"this device cannot start (Code 10) ". It's probably just because I have no network connection, but I can't be sure until I have find this code 10 means,.

  Thank you for your trouble,

  calicoghotmail

  Hello calico.ghotmail,

  My apologies for the delay in the response to this topic.

  Code 10 means that a device could not start.

  If there is no network connection on this computer, then this might be a possible reason for this error.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• Microstoft ISATAP adapt: this device cannot start (code 10)

  I've had no internet access for a few weeks - a day that worked and then the next day no wi - fi or Ethernet connection. Someone on the MS Community suggested to install driver updates, but the laptop in question has no access to the internet and has been updated automatically anyway. Today, I tried to reinstall the drivers on the adapters wi - fi and broadband from the phone itself, which seemed successful. But when I got to the ISATAP Protocol would not do the same thing and it comes up with the error message in the title of this post.

  I read a few posts, which suggest to uninstall the adapter and then put it back, but as my laptop has no way to connect to internet, I don't see how it will work in my case. I don't seem to have the Win 7 CD either, unfortunately. So, where do I get a new adapter or update the driver, or whatever I need to do?

  Thank you

  IRB

  Hi Snarli,

  Thanks for posting the query on Microsoft Community.

  I understand that you are unable to connect to the internet and that he wants to know if you will be able to re - install ISATAP Adapter without an internet connection or not.

  I suggest you to run the troubleshooter and check if it helps.

  Hardware devices do not work or are not detected in Windows:

  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  You will be able to install base drivers to restart the system after installation.

  If you have any other computer where you can download the driver and the copy to an external hard drive or USB key, you can go ahead and uninstall the driver and restart the computer. Is it does not automatically get installed, and then try to install it by using a USB key.

  You can consult the advice given by Vinod N replied on 26 April 2011.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/this-device-cannot-start-code-10-Microsoft-ISATAP/dc43be6f-466F-E011-8dfc-68b599b31bf5

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• in the Device Manager window.there is a brand of (!). Microsoft tun miniport adaptor.this device cannot start. (code 10)

  in the Device Manager window.there is a (!) brand microsoft tun miniport adaptor.this device cannot start. (code 10) hmendezlopez

  Hello

  Control Panel - Device Manager - do right click on them - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
  and on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• This device cannot start code 10 and could not open selected port

  I load the driver for my track past tracking key Pro and I get the message that this device cannot start code 10. I show no upper or lower filters so the troubleshooting on found here does not work.  If I go to program followed past and then look for the device I get the message could not open selected port.

  I tried all USB ports and they work with other devices. I have a Toshiba satellite running windows 7.

  The company was no help.  Can someone help me please?

  Thank you

  Liz

  Your best bet is to contact the developer again, we have no knowledge of their products.

• In a work previously Win 7 Pro Shuttle system, we are now "this device cannot start (code 10)" with high defination driver.

  The system with the problem is a shuttle G2 7600 with Windows Home Premium 32 Bit, AMD Athlon II X 2 ' dual core 2.9 HZ.  The sound is integrated 5.1 audio channels.  This works installed sense July 14, 2011.   We now have no audio.  After the properties of the device, see the "this device cannot start (code 10)" someone can help me with this problem?

  Hi Jack,

  You did changes to the computer before the show?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  I suggest you try the steps from the following link:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104/en-us

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Canon HG20: this device cannot start (code 10)

  Hi all

  My Canon HG20 camcorder works well on Windows XP. But it's not on Windows 7 64 bit.

  Here's what happenning:

  -The camera is recognized when I connect (via USB) to the PC photo transfer mode.

  -It is not recognized when I connect (via USB) transfer of film mode.

  -In "Devices and printers", the camcorder is shown, but with a yellow exclamation mark on it, notify a problem.

  -The properties panel (right click-> properties) shows "device status: this device cannot start (Code 10)".

  -(Right click-> troubleshooting) troubleshooting completed but fails: "USB mass storage has a driver problem.

  Any suggestions would be greatly appreciated.

  Thanks in advance.

  Hello

  You can try to launch its convenience store and check out what he has to say.

  Here's how you can do:
  1. click the Start button, and then select devices and printers.
  2. right click on the mouse and select troubleshooting.

  I also suggest to install windows update and check if that helps. Also update the drivers chipset, for this you may need to contact the manufacturer of your computer.
  See the article below to install windows update.

  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  http://www.USA.Canon.com/OPD/controller?Act=OPDSupportDropDownAct
  http://www.USA.Canon.com/OPD/controller?Act=OPDContactUsAct

  Hope this information is useful.

  Umesh P - Microsoft Support

• Satellite Pro A10: New card wireless Atheros/Askey, but "this device cannot start" code 10

  Hello

  I have a Satellite Pro A10 and bought an internal pci wireless adapter. The following information is displayed on my card:

  Askey WLL3070-D4 (MOW)
  Atheros AR5BRB-43

  I installed the card, attached to the ariel and turned on the laptop... the switch at the front lights up now and Windows xp detects the new ethernet adapter. My problem is the following...

  Any driver I install (and Ive tried all the drivers of the first 20 + pages of yahoo/google Askey/Atheros etc.) the card installs very well but then in device manager has a yellow! next to him and says this device cannot start (code 10)

  I am really puzzled. I have little ram more to come in the next few days how I am installng Vista im hoping sort my problems, but someone has any ideas?

  I have not yet find a driver which specifically refers to the AR5BRB or the WLL3070-D4 model number.

  Does anyone have a location for a pilot, etc.?

  Thank you

  Hello

  I always use this page for WLan driver update:
  http://APS.toshiba-tro.de/WLAN/

  It is a Toshiba WLan driver portal and you will find all the necessary drivers for WLan

  Ciao

• Get a Code 10 error "this device cannot start' for my optical drive

  Hello

  I am running a Dell Studio 540 with the following specifications:

  Processor: Intel Q6600 @ 2.4 GHz

  RAM: 4 GB

  HD: 750 GB 7200 RPM SATA

  Graphics card: nVidia 9800GT 512MB

  OS: Windows Vista Home Premium 32-bit

  All the drivers and BIOS are up-to-date.

  My current optical drive is an Optiarc DVD +-RW AD-7200 s ATA Device Unit which has now disappeared from "My Computer". By opening the Device Manager, it has a small yellow triangle with an exclamation mark inside. When I click on it that a new window will open and in the device status area, he said:

  This device cannot start. (Code 10)

  Currently, I have tried two methods without success. First, I downloaded the latest drivers/firmware for the optical drive directly from the Dell Web site, but to try to install, I get an error box saying that the "target drive is not properly".

  I also ran the Mats_Run.devices of the Microsoft Automated Troubleshooting services who correctly identified the problem, but said he could not address them and directed me to these forums.

  Any help would be greatly appreciated.

  Thank you for your time,

  Donald Lundie

  Hello

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  As you have already tried updating the drivers for the device, you can just go through the article that talks about the Code 10 error.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104/

  You can run the fix in the below article data and check if this is useful.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why won't my CD/DVD Slymtype player work, error: this device cannot start. (Code 10).

  Original title: why not my job as a player of DVD/CD of Slymtype at all?
  Here's what I have:

  SlimType DVD C DS24CZP ATA Device

  Windows Vista Home Basic

  Acer aspire 3680 series
  ------------------------------------------
  So here's my problem:

  Recently, I put a DVD disc into the drive. Then, once I closed it, it started to turn, then what sounds like a sound signal, spining, beeps several times, and this will be repeated for a few minutes. Once it stopped, it does nothing. You can not even here it spining. No AutoPlay starts, none Open box, nothing at ALL. The computer doesn't even recognize that there is a DVD in there.

  So, I advanced and found in the Device Manager. The picture showed it was a disc with a CD on top (representing is a DVD/CD player) and in front of it, there was a «!» So I opened the information for it. Here's what he said:

  "This device cannot start. (Code 10) »

  When I try to make windows to search for a solution, it came not with something. I tried to update the driver; no effect. Tried neutralizing him and he the reactivation. No effect. Tried unistalling and restart my computer. When he tries to install it, it fails.

  So now, I did everything I know. Does anyone know how to fix this without having to replace the drive itself? Or should I replace it?

  Thanks in advance!

  Hello

  Did you do changes on the computer before the show?

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Method 1:
  You can perform the steps in knowledge base article and check:
  http://support.Microsoft.com/kb/982116

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Method 2:
  You can also visit the links:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

• Series USB drivers does not start error: "this device cannot start. (Code 10) »

  Hello

  I have a usb_dev_serial.inf of TI and a catalogue of security usb_dev_serial_amd64 and a folder containing the amd64
  the DLLs below.  When I used the Add Hardware Wizard to load the .inf, properties of the pilot were "this device cannot start. (Code 10)"
  Does anyone have a suggestion?
  Thank you
  Larry

  Hi Larry,

  Thanks for posting in the Microsoft Community Forum. According the description, I understand that the USB device does not work, rest assured that we will do our best to help you with this problem.

  Answering the question that helps us provide the best solution:

  1. it worked before?
  2 have had any changes made to the computer before the question?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  Try the following and see if it helps.

  Method 1:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:

  http://support.Microsoft.com/kb/943104

  Method 2:

  Install the latest driver for USB and check if that helps.

  To do;

  a. click Start, type devmgmt.msc in the start search menu.

  b. right-click on the USB device and click on Update driver software.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Try connecting to another USB port and check if it helps.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.