We have Vista and you are unable to run Zoo Tycoon 2 Ultimate collection.

Similar Questions

• Unable to run Zoo Tycoon 2 Ultimate Collection

  I can install Zoo Tycoon 2 Ultimate Collection.

  But when I try to start the game, it says "zoo tycoon 2 executable has stopped working. A problem causing the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  I uninstalled and Re installed 3 times and I shut down my computer.
  Is there anything I can do to fix this or make it work?

  Hello

  The game Zoo Tycoon: complete Collection is not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=Zoo%20Tycoon%3A%20Complete%20Collection%20

  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  See also:

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

• I have windows vista and you are unable to install silverlight

  I can't install silverlight on my laptop. can you tell me the problem?

  Silverlight solutions Center:
  http://support.Microsoft.com/ph/12929#tab1

  Forum on Silverlight.net:
  http://forums.Silverlight.NET/forums/

• Unable to run Zoo Tycoon 2

  I have Zoo Tycoon 2: Zookeeper collection and most of the expansion packs. When I installed it, it happens with who need 256 MB of memory detected system to run zoo tycoon 2 (0Mo), I have 2 hard drives with 690 GB and all software. The compatibility of Microsoft site says it should work with a windows 7 64 bit. Is there anything I can do to get this job?

  the amazing people at Microsoft support knew exactly how to fix it.

  1) press start and search for msconfig
  (2) select boot
  (3) advanced options...
  (4) maximum memory change check 4927 (something like that) eventually, it may be different for each computer
  5) click ok and apply and ok again... He will be asked to restart and the game works as it involves

  I give many congratulations to the Microsoft team, it team chat is fantastic. If this does not work for you, I suggest using the Microsoft team since the Web site of Zoo Tycoon 2

  http://support.Microsoft.com/select/default.aspx?target=assistance

• I get "proxies cannot be captured by a stateless session" when I try to log in to this site. I went there there more than once in the past, but this is the first time I received this answer and you are unable to log on to this site.

  I've logged on this particular site, http://www.springairsystems.com/SpecAndQuote/User/Login/View.aspx a number of time's recent past. When I try to log in now, I get a prompt in red letter indicating, "proxies cannot be captured by a stateless session." What should I do to open a session? I set my privacy settings to allow cookies from Firefox, but is not alleviate the problem.

  See this - http://en.wikipedia.org/wiki/Proxy_server

• I have a new desktop computer HP with Vista Home Premium 64-bit, with 8 GB RAM and when I try to start Zoo Tycoon 2, he won't play, said that I have no memory system.

  I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message:

  You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected)

  Y at - it a patch? I have read many "Workaround" and none of them work. I tried to run in Windows XP compatibility mode and it didn't work.

  Hey tprefling,
   
  Thanks for posting in the Microsoft answers site!
   
  Right-click on the zt.exe file and choose "Run as Administrator" to launch the program.
   
  See if you are able to play the game.

  If this does not work, turn your computer to clean the start State and see if the fgame plays very well.
  
  To put your computer in a clean boot, follow these steps:
   
  Note: If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  1. sign the computer by using an account with administrator rights.
   
  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
   
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  5. click OK and then click on restart.
   
  For more information about the clean boot, see the link below:
  http://support.Microsoft.com/kb/929135
   
  In addition, change the size of virtual memory and see that helps. For more information, see:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

  For more details on the Zoo Tycon game, consult the following link:
  http://forums.zootycoon.com/forums/default.aspx
   
  I hope this helps!
  Gokul T - Microsoft Support

• I did a reinstall of XP Media Center Version 2005 with Update Rollup 2 and that you are unable to see my verizon cable internet connection? can canone help?

  I did a reinstall of XP Media Center Version 2005 with Update Rollup 2 and that you are unable to see my verizon cable internet connection? can anyone help?

  Thank you
  Joseph

  Open a command prompt window and type these two commands in the following
  order:
  (1) ipconfig/release
  (2) ipconfig / renew

  J W Stuart: http://www.pagestart.com

• What do you do if you are the administrator of a computer vista laptop and you are stupid enough to forget the password? How can I reset it? the "Wizard" and the reset option are without help?

  What do you do if you are the administrator of a computer vista laptop and you are stupid enough to forget the password? How can I reset it? the "Wizard" and the reset option are without help?

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• Windows wants to install updates for Office 2002 and Office XP and I have VISTA and Office 2007

  I have read many topics and I can't seem to find the same problem I have.  I use Windows VISTA Home Premium (32 bit) for awhile and since June 30, 2009, I had bad download and install Windows updates.  I installed updates today, but I continue to be invited to run/install updates for Office XP and Office 2002 (currently about 9).  I used VISTA and Office 2007 for some time.  I believe that I have IE 7 and SP2.  I appreciate any help I can get to fix this.  Thanks in advance for your help.

  Hello SKYisDlimit,

  After my communication to you, I continued to the Internet using the search.  I was finally able to locate the file you suggested (Msmapi\1033) he successfully Office Pro 2003 Outlook running.  Thank you!!

  I don't know if you're alone in asking the question following or not, but I'm still able to re - install Microsoft Office Professional 2007.  I uninstalled after information I received of Santosh, and it has the re - install Office Pro 2003 (which have been upgraded).  Now when I try to reinstall 2007 (bought in February 2007), I keep getting the following message: "Setup is unable to find a version of Microsoft Office on your computer.  If Office is installed on a disk or a network share, click the buttun browse to select the appropriate disk or sharing.  If you have a version of MB on a CD, insert the CD into your CD-ROM drive, and then click the Browse button to select the appropriate drive. »

  I tried several times without success.  Of course, I use Office 2003 Pro, so it's on the computer.  If you are unable to solve this problem, please either direct to the appropriate area or tell me who I need to contact.  Once again, thank you in advance for your help.  Needless to say, it's more frustrating!

  Katydid2

• Error during the downloading of any software on the computer: you do not have the necessary permissions to use all the features of the program you are about to run. You can run this program...

  Original title: administrator password

  Hi, I'm Jays

  I am running a windows vista, dell computer operating and so I would like to download a software on it, he asks an administrator password. The problem is that I don't have an admin password.

  There is one account on this computer, and it is not password protected.

  The entire message says:

  You do not have the necessary permissions to use all the

  features of the program you are about to run. You can run this

  program under a different name or continue to run the program as the

  current user.

  [checkbox] Current user (Dell-Dell-PC)

  [checked] Run the program as the following:

  User name: administrator

  Password: [BLANK]

  If I click on the area of the current user, it will not let me continue

  as I don't know the password, it displays a message when enter is pressed.

  What's wrong?

  Hello

  1. don't you make changes on the computer before this problem?
  2. I would like to confirm if you have found this quick installation of programs or by downloading programs? If you get this fast downloading then which browser do you use?

  If get you this error message during the installation of a program and then try to run or install the program with administrator privileges.

  Steps to run the file with administrator privileges:

  1. right click on the executable file of the program and select run as administrator

• We have a Nextbook but are unable to access the Internet at home

  We have a Nextbook but are unable to access the Internet at home, even if we have a laptop and PC. How to solve this problem? Thank you.

  Hi Vernon,

  1. you are trying to connect the Nextbook to wireless (Wi - fi) network in your home?

  It is a tablet based on Google's Android. As it comes to one product other than Microsoft, I suggest that get you in touch with the manufacturer about this issue. You can contact them at the following link:

  http://www.nextbookusa.com/techsupport.php

  Hope this information is useful.

• I have CS2 and you bought a new computer.

  I have CS2 and you bought a new computer. I could not download on my new computer, because it says "PowerPC applications are no longer supported." I contacted customer service and got a link to download cs2 using a different serial number but this download also said "unable to support powerPC applications." I know this is a very old version, but if I buy something that costs hundreds of dollars, I want this program to be effective.

  I know this is a very old version, but if I buy something that costs hundreds of dollars, I want this program to be effective.

  Well, this problem was caused by Apple not Adobe.

  In 2005 - 2006, Apple has changed the processors in their computers from PowerPC to Intel, which means that no software written for PowerPC (including CS2) will work on Mac to today Intel processor.

  If you want to continue to run the 11 year old software, you have unfortunately need an old Mac to run it.

  Current Macs can only run Adobe CS3 and later.

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• I have Vista and I can not program to open my Control Panel control or office told me application not found

  I have Vista and I can not program to open my control panel or office

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  You probably have an association bad .exe. Try the fix for this.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  * Original title: startup

  How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  Hello

  I understand you want to learn about programs, you should start your Windows startup. I will certainly help you to question.

  When you start Windows by using a normal startup startup, several applications and services automatically, and then run in the background. These programs include the base system, antivirus software, utility applications processes system and other software that was previously installed. These applications and services may cause interference when you install or run a program.

  The system configuration is a tool that can help identify problems that might prevent Windows from starting correctly. You can start Windows with common services and startup programs turned off and then reactivate them, one at a time.

  I suggest you to refer to the links below and check if this is useful:

  Using the Configuration System (msconfig)

  Perform a clean boot to determine if background programs interfere with your game or program

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.