We will not burn SN-S082H CD player using iTunes - error 2131

Hello

I just bought a laptop PC Nextday with the SN-S082H command that will not burn CD using Itunes - error 2131 (I think from memory).

Could someone let me know the solution to this?

Thank you, Rob.

I think that this error due to consistent problems.
I read in some articles of the computer that the iTunes software is not fully compatible with different CD/DVD drives firmware.

Tags: Toshiba

Similar Questions

  • Will not play DVD on DVD player [using a Mac]

    Hi, I'm a screener for my movie with again. I can it burns very well and he plays well in my computer and on my Samsung DVD player but my Dynex XDVD2 player plays. He plays other DVDs I have. I ran into this before when I burn a DVD and give it to someone and he does ' t play in their DVD player. This could be a very important search tool and I want to make sure he plays on any DVD player, this person has, because if it doesn't it's perhaps a missed opportunity.

    I tried to burn on the settings by default and then tried a lower bitrate (6.0 MB/sec) and the lower burning speed (4 X). Still will not play in my Dynex XDVD2 reader.

    Thanks in advance for any help you can give.

    What brand of DVD?

    As a test... say still create an ISO on your hard drive and use Imgburn to do the actual writing

    Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any add-ons toolbar... ImgBurn to use slow burning speed your drive and use the media... I put my burning speed to 1 x and let Imgburn adjust to the real minimum

  • Satellite A210 - cannot burn CD - R using iTunes - error 2131

    Hi all

    I know that I'm not the only person having this problem, but I get error 2131 when trying to burn CD - R help (v7.6) iTunes on Windows Vista with an Equium A210 TSST Corp TS-L632H CD - DVD writer.

    I tried all the usual things like the update of drivers, operating system, try different CD - R etc but no joy so far.

    I noticed a similar thread that was closed with the solution to use CD - RW instead of CD - R that unfortunately does not solve my problem because my audio CD drive cannot handle CD - RW (although the CD - R is very good).

    Practical suggestions anyone?

    Thanks in advance

    Hello, Alan

    At present, there is no solution, and you can only use CD - RW media. Sorry, but your situation when the CD player does not read the CD - RW media, you're just out of luck.

  • Burned DVD will not play on a DVD player

    I downloaded a 22 minute video I want to burn to a DVD in my DVD player.  I tried on the DVD-R and DVD + R.  They burn the disk but will not play on the DVD player.  The error message indicates that the reading is not available on this disc.  I used the windows search support to problem solve on my own, but have had no success.  I made sure that I am selecting the option of CD/DVD drive to use the ISO image format.  I entered my option and I have no filters.  I have the video on NTSC format since I'm Pennsylvania / U.S..  I have not tried burning on slow or average speed because it burns the DVD without problem it just will not playback on the DVD player.  What do you recommend as my next plan of action for troubleshooting.

    I guess that the video is not DVD compatible Mpeg2.  According to the DVD player, some will play other formats, too.  If there is no program for video on the computer, try Windows Movie Maker (free) to see if the video will too be converted to standard DVD Mpeg2.

  • My Windows Media Player will not burn a CD, it is 99%, then will not be finished.

    My Windows Media Player will not burn a CD, it is 99%, then will not be finished. Used to work fine, no problems then just started does not. I tried Microsoft FixIT & or troubleshooting solved my problem. What can I do to fix this?

    Hello

    1. what error message you get when it ceases to burn a CD?

    2 What problem confined to a particular CD?

    3 did you change on your computer before the show?

    4. have you tried Open-the-playing-and-burning-cds-dvds-and-bluray-discs-troubleshooter?

    Method 1: Try a different CD and check if it helps:

     

    Method 2: Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

     

     

    Method 3: Try to perform the clean boot and check if it helps, here is the link:

    http://support.Microsoft.com/kb/929135

    Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

  • Windows Media Player will not burn my files!

    Media Player from my window will not burn my files on my blank CD rom. I add what I want in the colum burn and then I click on button (start burning) and try to start burning but 10 seconds later, it ejects my blank CD songs and pop of the screen upward to say that... (Windows media player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.)   Please help me and understand what to do!    Thank you

    Hey Tashina_Jean,

    Here are a few things to try:

    1. make sure that the disc is clean.

    2. Select a recording speed (write) more slow for the CD burner (recorder).

    3. try a different brand of blank discs.

    4. stop all other programs that are running.

    5 disable any programs that could activate themselves, while burning is in progress, such as screensavers or anti-virus programs.

    6. defragment your hard drive.

    Links: what please refer:

    To reduce the burn speed:

    Change settings for burning a CD or DVD in Windows Media Player

    http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

       

    For disk defragmentation.

    Improve performance by defragmenting your hard drive

    http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk

    Also, see if the Update CD/DVD rom driver.

    For driver updates, see:

    Update drivers: recommended links

    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

    Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Media Player will not burn CDs

    I have a ton of gripes about this crappy program, at the absence of easy navigation (where the hell is the tab "Check for updates" / "about", * can't find anything) for the long time of waiting just for the stupid thing may work correctly. My question is this: why I can not burn CD with Media Player? Lol I have always, even if Microsoft was supposed to be the smart company making the best stuff, but I don't see these days is garbage. It's sad.

    Nevermind, got the disc to burn on my Macintosh instantly without any problems.  To the review windows.

  • Satellite P10: The drive will not burn DVD

    Hope someone can help me,

    I have a Toshiba Satellite P10 and have just received some photos software, burning
    But my drive will not burn DVD, I try with discs DVD - RW which must work my laptop.
    What is happening is when it comes of the burn on the part of the disk of the process he starts, but it fails.

    I tried to burn it with Nero, but even if I burn OK on any CD discs with this software it will not work on DVD discs. It's really annoying because when the burning process it fails so that it makes the DVD - RW disc seem curupt and then my drive has problems mounting the disc to try a deletion once more.

    I have the Nero log file failed
    Done if it's any help to anyone.

    A big thank you Michael.

    Hello

    What about different DVD media? Have you tested the media DVD-R or DVD + R common?
    Have you tried different brands of DVD?
    I can't give you a properly answer why the drive can't burn your DVD - RW, but to my knowledge not every media is supported by the player.
    So I think you should check different DVDs.

  • serious discs will not play on the cd player or car drive?

    When I burned a cd of music with windows media player, the disc will not play on my cd player or car player! Help!

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/burned-CDs-will-not-play-in-CD-player/48cecc76-0A15-4c16-952d-f388244387f9

    See the response by Diana d.

    Tom Ferguson

  • Windows 7 starter edition will not burn DVD and will not format

    • My recorder DVD format player, will play and burn DVDs when I move my dvd drive to another computer running windows vista
    • It will not burn a dvd or format a dvd rw disc when it is attached to my netbook toshiba running windows starter 7

    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

    Engraving for Windows 7 Info

    If your computer has a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. Windows Burns discs in the active file system format or in ISO image format, depending on which disc format you choose.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

    My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

    I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

    When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

    A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

    If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

    Hello

    Try the microsoft 'fix - it' for your problem below

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    and read this information too

    http://support.Microsoft.com/kb/982116/en-us

  • LOOKING FOR DVD DRIVE FIRMWARE W. 7. PRO DRIVE WILL NOT BURN

    MY OPTICAL DRIVE WILL NOT BURN OR FORMAT, IT WILL READ.  IT ALSO DESTROYED RECORDS. The M/S FIXIT TOOL DOES NOT HELP. TRY TO FIND THE FIRMWARE for a (STANDARD) OPTIARC ad - 7540a PLAYER PERSPECTIVE.  I LOWERED THE WRITE SPEED, OFF THE DRIVE AND REACTIVATED, WITHOUT SUCCESS.

    AN A6020 FUJITSU NOTEBOOK, ORIG. WITH VISTA AND UPGRADED TO WINDOWS 7 PRO.

    will follow your advice and get a USB key.       Ernie g

    Definitely recommended, and they are bootable too. :)

  • my screen is blue and the playlist will not burn to a cd

    try to burn a playlist to a cd.  Playlist will not burn.

    You use a PC or a Mac - I can then ask for your message to be moved to the iTunes for Windows or iTunes for Mac forum

  • Optical drive will not burn

    I saw that there are many other positions on this, and although I found others who had descriptions which were similar to mine, the patch did not work.

    My specs:

    Windows 7 64-bit SP1

    H8 HP desktop PC - 1360t

    My optical drive: DH16ACSHR

    My driver for the optical drive is the cdrom.sys, the version of the file: 6.1.7601.17514, date 21/06/2006 driver

    When I bought my computer, I did a clean install of Windows 7 64-bit. A ran all updates at once and drive perfectly serious. A few weeks later, it will not burn. I use Windows to burn simply .pdf files, and it gets to the point where it says 'burn', but after I click on burn the dialog box disappears. The drive makes noise and rotates the disk and writes data to it, but the dialog box never pops up or check the disk. It shows no more burn % completeness. If I try to remove the disc, the drive does not open. If I open with a paper clip, because the disk rotates, it sure is beating sounds and jams. When I open the drive and the drive, the drive clearly has written data to, but it cannot be read by other readers. It just says: the disc is no longer a Virgin, but I cannot see what is on it.

    I HAVE ALREADY TRIED:

    Remove/uninstall the driver

    Checking the registry entry for the upper and lower entrances, THERE ARE NONE

    Being run/scannow - Windows comes up saying that it could not find any problems, all right.

    Update driver - he says I have the latest driver

    Roll back the driver - he says that there is no driver installed previously

    I had a HP Office before a different model and exactly the same thing happened then. When I first came to this other, it burns very well, so I thought that maybe it was a problem with the previous machine... but then after a few weeks it started doing the same thing.

    I'm confused because when I look at the release date for the driver, it's super old, and he says it's the latest version... but Microsoft lists 50 updates to it at least between then and now, some of them as recently as June. I can't seem to find a way to download this driver common windows by itself and install it this way or the other.

    I refuse to do a complete reinstall because I do not think that it will solve the problem more than temporarily. Within the company, it is the fourth total office with what has happened, and whenever we do a clean install, it works at first but then goes back to the same problem again.

    Hoping someone has an idea where I can get a newer than 2006 for this device driver.

    Hello

    Hope the following patch helps:

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Good luck.

  • I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play.

    Windows XP DVD with Windows Media Player problem

    I have a Dell dimension3000 running Windows XP. I have an upgrade video card NVIDIA 8400 GS with memorey upgrade 2 g. I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play. Is there a better plug-in or a solution to this problem?

    Try to download the utility "Windows XP video decoder check utility.

    It checks the ability of DVD to WMP encoder

Maybe you are looking for