Web cam has stopped working and is no longer in Device Manager
on my inspiron 1420 dell webcam has stopped working. I have not found in the Device Manager.
Also, which could be connected, when I start a box opens indicating this device A USB is not recognized - but there is no connected device.
any help?
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Look here:
Reload the drivers of web cam and the enforcement program web cam dell downloads for your inspiron 1420.
Tags: Windows
Similar Questions
-
Bridge "get photos from camera" has stopped working and bridge no longer recognize my DNG files
, I've got bridge set up to get the pics off mem.card whenever I have insert one in my laptop (win. 8.1). A week ago I installed PlayMemories from Sony. Without asking he hijacked the task of the bridge to get photos of my cards. What's worse, I tried to start the function "get photos from camera" manually from the deck. Bridge started working, but nothing happens. I uninstalled PlayMemories and reset the bridge, said to my laptop to run bridge as soon as I insert a card. Still nothing is happening and I still can't get the function "get photos" to run manually from the bridge. In any case, I can still rund the DNG Converter to get my photos, but today Bridge does not recognize my files DNG - a well brought yesterday. CS6 downloaded from this link https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html and tried to run the Setup program, but it doesn't seem to do anything. Maybe I should do a full uninstall off CS6 for her to do something... ? Anyway, if any of you guys could help me with my problems of bridge/CS6, I would be grateful. I have 3 sets of photos together and a shoot of comp. of snowboarding I have to finish this week
CS6 running windows 8.1
Good point.
Bridge was not integrated with CS6 to CC? I have a following if, uninstall/reinstall only for laughs.
-
Re: Satellite L450D-11 X built in Web Cam has stopped working
When I open the Toshiba Photo / Video software I just get a photo of clouds. The webcam led turns on but I have no image.
I aircrcrack and installed the latest version of the webcam software, but have the same problem. I removed the Chicony usb camera from the Device Manager and rebooted.
The pc has re - install the driver software, but I still have no picture.
All of the suggestions.
Thank youHello
Maybe you should try it;
In Control Panel-> devices and printers, you will see the webcam listed as working device.
We could remove the webcam and could attempt to reinstall the driver again.I'm not sure if it would make a difference because you have already tried to delete this device manager but it of certainly worth a try.
-
Whenever I send an email that the warning box appears - WebKit2 process Web, exe has stopped working. I hit close program, then he gets me out of my Inbox.
If I do not close the warning box my computer would you like s in limbo. What is is? It is not in my control panel and is not launched as program in my computer.Help?You will find support for Safari (browser) in this forum-online https://discussions.apple.com/community/mac_os/safari?categoryID=169
-
I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message
"GPCore COM object has stopped working and was closed".
This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.
Hello MikeF48,
Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.
I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.
Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.
Of the Original installation CD:
1. Insert the CD in the drive and then cancel Setup
2. open my computer and click right then on the CD from the drive and select open
3 open the Util folder
4 open the CCC folder
5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://get.Adobe.com/flashplayer/
9 download drivers and full software features
Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
10. run the download to reinstall the printer
If the software has been downloaded and extracted to your system:
1. type % temp % in the field of race
2. Locate and open the folder starting with 7z (example: 7zS2356)
3 open the Util folder
4 open the CCC folder
5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://get.Adobe.com/flashplayer/
9 download drivers and full software features
Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
10. run the download to reinstall the printerAfter having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.
-
Installer of Modules of Windows has stopped working and was closed
Hello
I have a laptop Toshiba Satellite (running Vista Home Premium) that I bought about two months ago. When he tries to run updates, he routinely gets through a few and then up pops the message "Windows Modules Installer has stopped working and was closed." I have already reinstalled Windows Updates and Microsoft Updates, nothing helps. Recently, she was immobilized on the KB958623 update, so I tried to install that separately, but the same message popped up and it did not work.
Help?
Thank you!Greetings mollypopsicle,
I see that we have always had problems with this update. This leaves me with the question about the possibility of fi computer update auto is damaged during download.
I would like to have you create a folder on your desktop. Right-click on an empty spot on the desktop / new / file - name of the folder KB958623.
If you have a download manager, please use it to download the KB958623 update from this Web site
http://catalog.update.Microsoft.com/v7/site/search.aspx?q=958623%20
Make sure you use the version of Windows Vista that applies to your system.
Once the download is complete and before running the update
- Restart your system in safe mode with networking, as described in the above post from Brian.
- Once the system is booted in safe mode with network, run the update from the file that is downloaded on.
- If this does not properly complete, were there a pop-up Windows indicating that an error? If so, what were these errors?
- Maybe it's that the error you receive is that this update does not apply to your system. If so, this update can be hidden in your list of updates.
Here is a link on how to hide the update
Select only the I'm getting offered an update from Windows that I don't want.
However, before you do, check which version of Windows Vista is ran - home edition, Premium, Ultimate, it is 32-bit or 64-bit edition. Also, if there is an error of execution of this manual update mode safe mode with networking, include this information in the forum.
Thank you and continue to keep us informed of the State of this update.
Best regards
Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.
-
Whenever I run windows update, and try to install an update for Vista, I get the error message"
"Windows Modules Installer has stopped working and was closed"
. This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.
Thank you
Luke
Hi guys
I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.
Thank you
Luke
-
Desktop Window Manager has stopped working and was closed
One of our machines (HP Pavilion dv7 Notebook PC running Windows Vista x 64) will receive the error "Desktop Window Manager has stopped working and was closed" with lots of close error. He reappears (as well as all windows flasher to non-aero, then back to aero) in a few minutes, spends about 5 times per hour.
I did some research on this and have already taken the following measures without a bit of luck:
1 run the command chkdsk / SFC scan - nothing found via chkdsk, SFC found some issues fixed, and some, it did not set. Them that it solves not all related to Windows Sidebar, which I do not / does not start.
2. put updated drivers for ATI Radeon 3200HD - this had a lot of new questions. Installing caused newer drivers ATI catalyst to no longer work with errors during installation and popup errors at startup. After trying several solutions workaround to try to get installed it, I ended up coming back to the driver that came with the laptop, that are properly installed and working without error. I am skeptical of update of this stable driver as a solution to the dwm.exe error.
3. this problem just started yesterday, that occur with not a lot of changes. Other than updates of windows (I think that .NET framework and a few other updates installed), I replaced NOD32 antivirus with Bitdefender antivirus. The system was stable with bitdefender for about 2 weeks, so I'm not convinced that this program is causing the error.
4. the event viewer shows the following:
Failing application Dwm.exe, version 6.0.6002.18005, time stamp 0x49e02696, failed module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0 x 80000003, offset 0x00000000000461f0, process id 0 x 124 error, start the application time 0x01cea0365a457adc.
Offset, process id and start on time all vary, but there are a lot of these application errors in the viewer all screaming Dwm.exe like the failing application.
What should be my next course of action?
You do not receive an error but a caveat. NTStatus results (the set of codes execption used by ntdll - the failed module) begin to 0 for no error, 4 for information (you should never see this), 8 for putting guard and C for error.
It's your specific error.
//
MessageId: STATUS_BREAKPOINT
//
MessageText:
//
EXCEPTION {}
Breakpoint
A breakpoint has been reached.
//
#define STATUS_BREAKPOINT ((NTSTATUS) 0x80000003L) / / winntProblem is, you shouldn't have breakpoints. Breakpoints are set by debuggers and stop the execution of the program to the State of the program can be examined. There should be no breakpoints in a retail system. More breakpoints are inserted into memory during execution of the program in a debugger. They tend not to do in the actual file.
So here are two assumptions, either you have no exit code, IE test code (driver?). Or you have a running program that behaves like a debugger (which is suspect).
Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.
Clean boot
Click Start - all programs - Accessories - run and typemsconfig
Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.
Tip clean bootIf the above does not help.
Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.
Reset. If this resolves your wake problem half of the items until you find the one that.
Safe mode
If the above does not help.
Click Start - all programs - Accessories - run and typemsconfig
Go to the Startup tab, and then click Start. Reset. Come back here and uncheck the box secure start to return to normal mode. -
Trend Micro Internet Security has stopped working and was closed
Original title: manages all components of Trend Micro, __Internet security. has stopped working and has been __closed. __
Have you tried to disable my windows firewall and am always get error message (manages all components of Tred Micro Internet security has stopped working and was closed)
Hello
You should check with the support of TrendMicro.
Frankly it seems to ask a lot of questions, so I remove it and replace it with other more
compatible methods. To uninstall it, and then use the removal tool from
TrendMicro.TrendMicro - removal tools
http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspxHow can I uninstall my Trend Micro program removal tools fail?
http://eSupport.trendmicro.com/pages/how-do-I-uninstall-my-trend-micro-home-and-Home-Office-program-if-the.aspx------------------------------
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 5.x and 4.8 x
Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Intel Graphics driver has stopped working and fixed
Hello
Just for a few weeks, I get an error message whenever I try to go that you tube, Intel Graphics Accelerator driver has stopped working and got windows xp. Although I use windows 7 64 bit, I get windows xp driver error. Anyone has any ideas how to fix this error...?
Thank you
Osama
Hey Osama,
I suggest you to see Web site intel to learn more about questions to know about errors in Intel.
http://www.Intel.com/support/graphics/sb/CS-009483.htmSend us updates after trying the steps above.
-
Registration for the web function has stopped working in my copy of photoshop elements 12. I get this message "the operation could not be completed. The system cannot find the path specified"reset preferences was not fixed.
My os is windows 7. elements of 12 worked fine for several months and then save for web stopped working
-
HP pavilion n203tx 15: Amd driver has stopped working and has recovered
Hello ive been using this laptop for 2 years now and ive started suddenly get this error "amd driver has stopped working and has recovered" and sometimes one of the apps I open freezes and then I get BSOD with errror "AMD pilot State failure" any help would be appreciated.
my laptop is Hp Pavilion 15 n203tx im using windows 8.1 I have amd radeon hd 8670 m graphics card
Thanks in advance
Hello
Try this
install the following in the same order
Chipset: http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63965.exe & Reboot
Graphics: http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64573.exe & Reboot
BIOS: http://ftp.hp.com/pub/softpaq/sp73001-73500/sp73288.exe & Reboot
Or if you have assestent installed on your laptop supports HP run all updates of pilot who.
-
My safari has stopped working and will not charge
My Safari has stopped working and will not reopen little matter how hard I try. I was told to paste some information on this forum.
Try to open Safari in safe mode. Make sure Safari is no longer running, the black dot in the icon on the Dock should not be visible. Hold down the SHIFT key while clicking on the Safari icon. If Safari loading, the problem is related to the third-party extensions or plugins.
If Safari is slow, unresponsive, which closes unexpectedly, or has other issues - Apple Support
-
Original title: I get a box indicating the dell support center has stopped working and microsoft has closed the program in order to seek a solution, then nothing happens, and the box comes up again and again?
I get a box on screen telling me that the dell Center support has stopped working, and microsoft has completed the program to check the solution
It happens every 5 minutes but never comes up with a solution
Hello
Refer to this article and follow the steps to help solve this problem.
Dell Support Center has stopped working error appears
http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=427832 -
Why my 8 Adobe has stopped working and I am unable to download the latest updates?
My 8 Adobe has stop working and now I am unable to open everything about Adobe. I tried to update to the latest cersion, but don't succeed.
The most recent version is Adobe reader X (10)
I do as suggested by Azam and uninstall the previous version. Have you tried a system restore to an earlier date and then tried to uninstall. If you click on "help" in the toolbar of the Adobe Reader there may be an option "repair Adobe installation".
You could also try to reinstall Reader 8 and try once again an uninstall.
If all else fails I try and install Reader X in any case if you have a corrupted version of the 8
Maybe you are looking for
-
Problem with DVD/CD-RW on a P10 with XP home SP2
Satellite P10 804 Windows XP Home SP2.When I use my DVD - RW to write CDs (I'm not sure about only read) DVD - RW then won't recognise a DVD until I rebooted the machine.Of course, he is stuck in a kind of internal mode.How can I fix?TFAI
-
I downloaded a soft music that says Norton were safe, but the minute I opened it, my computer froze. So I restarted and it will allow me to connect but then just goes to a black screen with the mouse. What should I do?
-
Pro XP Recycle Bin is corrupted?
Fix it scan reveals this problem without solution. I really didn't not at all understand this problem.
-
Installation problems: Dell AIO Printer 962
I can't install my old printer (Dell AIO Printer 962) to my new laptop which is running Vista. Can you help me please?
-
I don't know much about how to do updates, except to allow Windows to automatically. However, since the installation of Windows 8 on my computer about 3 weeks ago, I can't get the updates. Computer through movements and then says that it has failed