Web Cam not working not not on HP laptop after installing Windows 8 Pro disc

Similar Questions

• After installing windows XP Pro my computer does not start correctly

  After you have installed Windows XP Pro on my HP Pavilion (updated to XP home), my computer will not end the restart process.  I have repeatedly in a loop once the blue screen with the HP logo.  When this has happened before after installing a pack of updates for XP Home, we just started in safe mode and then had it will restart at an earlier time, thus eliminating the updates.  However, now when I try to start in safe mode, I get an error message that says: "Windows Setup cannot start in safe mode" and I leave safe mode.  We hoped that by installing Windows XP Pro, this problem should go away.  Can anyone help?  I have read several other entries in the forum for similar problems, but they all have to do with updates.  This is the first time I was not able to use safe mode, so now I'm stuck.  I hope that I can avoid having to perform a full system recovery, since it is a long involved process and having once before, I always felt the same restart problems after installing updates.

  PA bear,

  Thank you for help... After reading several posts in the forum, one of them reminded people to check with the manufacturer of the computer so that possible solutions... and this is the solution here, I wish I thought of him earlier... I did a system recovery to remove the Windows HP Pro and return to the original version of the default value.  Then I went to the HP site and downloaded the patch according to their directions.  Problems fixed! :-)

  Any PERSON HAVING HARD REBOOT YOUR HP PAVILION (with an AMD processor) after you install Windows XP service pack 2 or 3 updates:

  HP has a patch that solved all my problems.  Clearly, service packs contain information for Intel processors that is in conflict with AMD processors in many HP Pavilion desktop computers.  You can go to their customer service solutions website and download the patch.  Since I did it, I had no other problems. I wish just that I had discovered the solution until I had to do a full system recovery.

  If your computer hangs on reboot 'loop', see if this info. HP will help you:

  The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)

  If you have had problems with XP updates, including service pack 2 or 3, try this page:

  Before you install Windows XP service pack 3

  Please pass on to other similar issues.

• Web Cam not recognized since the upgrade to Windows 7

  I've recently updated my Toshiba Satellite Windows Vista to Windows 7. Skype now does not recognize my web cam. How can I fix it?

  By getting the win7 drivers and Tosh photo app supports, specific to your model, they provide win7 drivers, if it's not vista drivers usually work

• Can not hear the sound after installing Windows 7

  Original title: Audio problem

  I'm not able to hear any sound from my computer. I have integrated speakers it was working perfectly before, but after I installed windows 7 if I play any audio file I can see the game but I hear no sound what should I do

  Vista clean install of XP?

  Anyway, you will need to install W7 audio drivers specific for your audio device. Download on the part of the Web site of the manufacturer of your PC/laptop, Web site of the manufacturer of the motherboard if you made the yourseof PC, or, if you have one, the sound card manufacturer's Web site.

  See you soon,.

  Jerry

• HP pavilion n003tx: MY HP laptop does not shut down properly after installing windows 10

  My HP laptop worked perfectly with windows 8.1. After the upgrade to windows 10 is not shut down properly. Power and wireless signals is always bright and also consumes the battery.  I need to press the button for at least 4 seconds power in order to stop completely.

  Is there any possibility to get rid of this problem

  Spoiler (Highlight to read)

  

  

  When I disabled the quick start in power options > it works very well with a certain delay before start-up

• OfficeJet 7310xi does not print duplex automatically after installing Windows 8.1

  When I bought my Officejet 7310xi and installed on my Windows XP desktop PC it worked fine print double-sided documents automatically. I recently bought a new desktop PC with Windows 8 and improved to 8.1 Windows and downloaded and installed the Officejet software drivers from the HP download site. But now not printed double-sided documents AUTOMATICALLY - when this option is selected, I get a pop up screen telling me to remove the documents from the output tray, turn around, and then reinsert them into the feeder, that is, that it acts as if I asked for MANUAL duplex printing.

  I found this to be the solution: the "Général" tab: I clicked on "Edit properties"; This time when I clicked on the "Device settings" tab, the "unit duplex (for printing on 2 sides): not installed" line was not dimmed, and I was able to change the setting for "installed". Automatic printing two-sided works now. Thanks for the help.

• E1 - 572G Acer will not sleep but crashes after installing Windows 8.1

  Hello

  I recently got a brand new Acer E1 - 572G. Windows 8 was installed, I've upgraded to Windows 8.1. He won't go to sleep normally; If he sleeps, he doesn't wake up and only by pressing the Power button a few seconds causes a turn-off. All my work is lost. I reinstalled Windows 8; everything worked well and then work. Upgrade to Windows 8.1, same problem as before. What I can do to make it work under Windows 8.1?

  Wilko

  You can try updating to the latest version of the BIOS available for your system. Make sure that you carefully follow the instructions to update. I also recommend that you download and install the latest video driver for your system. You can find downloads of your product to http://www.acer.com, click Help, and then drivers and manuals.

• Can not start on Vista after installing Windows 7 Beta previously, error with vdrvroot.sys

  Windows 7 Beta is installed on the same drive as Vista boot Vista.Icant

  How to make a copy of the Windows\system32\DRIVERS\vdrvroot.sys file? Cannot start without him?

  Hello

  Here's the information to do a vista repair disk start

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!

• How can I do I check Windows Update after installing Windows 7 if my internet interface does not work?

  My only internet connection is done by an AT & T USB Connect 881U (mfg Serra wireless). Windows 7 update Advisor indicates that

  I need to check Windows Update after installing Windows 7 to make sure that I have the latest driver for this device, otherwise it can not work.
  If this does not work I have no way of checking Windows Update. Any suggestions of how I could get out of this situation if it happens.

  When all else fails RTFM:

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  The serial number of the computer has nothing to do with the product key for Windows.

  What happened when you tried to install Xp with sp3? If you do not have the original for the computer that you use to install Windows?

  You can try to contact the manufacturer of the computer who may be able to provide the recovery disc. The disks are usually under $ 20.

• After installing windows XP sp3 do not work my motherboard drivers intel

  After installing windows XP sp3 my motherboard drivers intel do not work. My mother board D845 GLAD. What could be the problim?

  Try reinstalling the drivers for your motherboard chipset, you can check this link to download the chipset driver:http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%c2%ae+845+Chipset+Family+Boards&ProductProduct=Intel%c2%ae+Desktop+Board+D845GLAD

  Also, try to download the drivers from your computer manufacturer site... Their number is 800-936-5700, and they are open Monday - Friday, 05:00-21:00 Pacific, Saturday & Sunday, 06:00 - 15:00 PST. XD

• Install windows xp pro 32-bit on pc that is already running Windows XP pro 64 bit. Product key does not work

  I have a windows xp pro 64 - bit PC. I would like to install windows xp pro sp3 32-bit. This is a PC that was used in our Engineering Department and now will be sent to a standard user in our society. I went through the installation and when I enter the product key on the COA label a message that is not valid. Do I need a different product key to install the 32-bit version of XP?

  A Windows XP 64-bit product key will not work with Windows XP 32-bit installation media.  You would need a genuine Windows XP 32 - bit product key. Carey Frisch