Web pages load slowly and also get an error: Web page not available.
Original title: Asus router problem.
Hello
I have the ASUS RT-N66U router and a computer laptop 64 bit of Lenovo Ideapad Y500 Windows 8. I also have a bespoke of desktop running Windows 7 64 bit, but I think that this router supports Windows 7 and not 8, unless you download and update the firmware. So, using my laptop, I've recently updated it by going to the downloads section of the router on the ASUS website support. I used Windows 8 64 bits like BONES, uploaded the firmware updated on the Web site of router using the firmware file and manually restarted the router. Once again, all these have been done on my Windows laptop, 8, with the exception of restart manually. However, YouTube is still sometimes the videos loading slowly. Sometimes, when I type in a website and press ENTER, it would be just the load very slowly with a blank white screen, up to the point where he sometimes displays something like "cannot load the Web page" or something like that. Other times, the site is displayed correctly, but the Web site tab (I use Google Chrome) would always indicate that it still load. And other times, when I type in a website and press ENTER, it would load slowly. I press on enter again and it would go on the site. It's really weird. Any ideas on how to fix it?
Thank you.
Hello
I try to determine if the problem is with the web browser or through the network. Check if the experience, the same question when you work on Internet Explorer and let us know the status of the issue.
If the problem is specific to Chrome, then you will need to contact Google Chrome support for assistance.
https://support.Google.com/chrome/?hl=en
Hoping to hear from you soon.
Tags: Windows
Similar Questions
-
original title: pc maintenance
Make a right click on the folder responds slowly and sometimes get an error "windows does not.
Make a right click on the folder responds slowly and sometimes get an error "windows does not.
This could be due to so many things. Malware, applications in resources, solutions anti-virus, hard drives damaged, damaged file system, processor ram capacity limitation...
can't tell what your problem exactly, you can use the reliability monitor, event viewer to discover additional problems...
What does it mean when a program is not responding? http://Windows.Microsoft.com/en-us/Windows-Vista/what-does-it-mean-when-a-program-is-not-responding
-
could not access vb run time for custom action script
I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services. Any ideas?Hello
I suggest you run the fixit and see if it helps:
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
Also check out this link:
It will be useful.
-
I get the same error when you try the same thing with the default styles, the file is not.
You can load the layer style using the Styles Panel using load or replace Styles.
Window > Styles
You can also put the asl file in any
/ Applications/Adobe Photoshop CC 2014/Presets/Styles
or
your user library
/Users/ Your user name Application support/Adobe/Adobe Photoshop CC 2014/Presets/Styles
so that it displays in the menu styles all the time
http://helpx.Adobe.com/Photoshop/using/layer-effects-styles.html
-
Please help me solve this problem, I tried everything what gpu is not seen by any program, all drivers are up-to-date
I had to re install windows only way worked
-
Whenever I try to load a program I get an error message
Whenever I try to load a program I get an error message / is not a valid bencoding, how can I stop this
original title: cannot load programs.Hello
- What is the name of the programs/Applications you are trying to install?
- Is the issue limited to a particular application or occurs with any application you are trying to install?
- What the exact error / message code you receive while trying to load?
- What antivirus do you use?
- You did it all changes to the computer before this problem?
Method 1: Resolution of problems running the program:
Open the troubleshoot program compatibility utility
http://Windows.Microsoft.com/en-AU/Windows7/open-the-program-compatibility-Troubleshooter
Method 2: We can use approach 50 / 50 to narrow down the root cause of the problem.
See the article below for instructions on how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
Method 2: Click the link below to provide newspapers:
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
Reference:
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
It will be useful.
-
Original title: W7 error play "Media is not available.
On W7 Ultimate, I'm having a problem in the use of "play to" media action to my Sony TV. The tv is visible as a device and it is the same for the laptop to the TV. On laptop I get the error: "themedia is not available." Similarly, when I try to access the laptop to TV, I get error "can not access the server. any solution?
What exact model Sony TV? You may need to install additional softwareSee the content if you want to browse the content on the computer from the computerthe TV. as to play to, seefor beginners.BarbMVP - Windows/entertainment and connected homePlease mark as answer if that answers your question -
Cannot get on internet, ebay or by e-mail. I get the page that says - Web page not available-. How can I fix?
Make sure that you are connected to your WiFi network and make sure that an internet connection could be established since the modem (the area where past the line cable or phone) and the router (the box that connects to the modem via ethernet).
-
I have download a scanned receipt on a Web site and I get the error message "the connection was reset". I downloaded these reception for two years and last week, I had to use a different browser to complete this operation. I log onto the site and make the report, I have to do, but I can no longer download on this site.
Safe mode does not work. However, when I downloaded Firefox laptop everything worked. Any suggestions as to where I should go now. Thanks Fire Fox works on other sites I work with. The download has started working. I think the problem was the website.
-
My Vista 64-bit is down packages. Load slowly and video streaming does not work.
My Vista Home Premium 64-bit, is dropping packets. It load slowly and streaming video doesn't work well at all. I changed the modem DSL/wireless 3 times now. The problem persists. I am told that this may be the result of the execution of Windows Vista. It loses about 31% of the packets of information that are sent to, as determined by a test via my DSL server. Is there a fix or I just need to upgrade to Windows 7?
Help, JMick-loreI have the same exact problems with vista. I tried modems so switching. I can't listen to anywhere on the computer including windows media player. Just restored my pc to the factory and the problem is still there. Don't know what to do.
-
Computer not starting and I get an error message
After that I ran the microsoft of what free security scan it found some files that were Trojan horses that he couldn't get rid of, so I deleted manually solve them some of the problems that I had. The end of the analysis told me to restart my computer so I did. But now it will not start and I get an error message that says: "a problem has been detected and windows has shut down to prevent damage to your computer. Then he told me to check the virus and to ensure that it is configured correctly and run the CHKDSK command to check the alteration of the hard disk and restart my computer. How am I supposed to do all this if I can't even start up? I tried to go into safe mode, but the same screen comes up. He gives this technical information at the end of the message. STOP: 0x0000007B (0xF79E4524, 0xC0000034, 0x00000000, 0x00000000) if someone could help me it would be so awesome thank you.
Hello
Check the disk for malware:
Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
Integrable Hirem is another choice - more can be found using Google.Trinity Rescue Kit - download on top right of the page
http://trinityhome.org/home/index.php?wpid=1&front_id=12CD of Hirem boot is another good choice
http://www.hirensbootcd.NET/Download.html
http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.htmlScan a Windows PC for viruses from a Ubuntu Live CD
http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/===================================================================
You can also save the data and re-install Windows 7. The hard drive can be set
another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
allows you to copy the data to removable media such as CD, DVD or other USB drives.Or you can use a boot Ubuntu CD to back up data.
Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer===================================================================
For slightly more:
BCCode: 7B 0x0000007B
INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.
Important information if you have received a STOP Code
If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.
If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.
The following actions could prevent a mistake like this does not happen:
- Download and install updates for your computer from Windows Update device drivers.
- Scan your computer for computer viruses.
- Check your hard drive for errors.
Cause
Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.
This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)
Resolution
This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.
Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.
Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.
Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.
Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.
If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.
In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.
This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.
If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.
Warning If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.
If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.
BCCode: 7B 0x0000007B<-- read="" this="">-->
* 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-=================================================================
If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
protected. The manufacturer of your system will also sell the physical DVD cheap since you already
Clean Windows. You can also do an ERD on another computer.Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
return and then try to startup repair.)How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7Try the disk Options recovery or Windows 7 startup repair.
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlAlso from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.htmlRetry After Chkdsk startup repair.
If after those you can try the system restore to fashion without failure or the valuation or Windows 7
disc.How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html--------------------------------------------------------------------
If you need to repair disks - these help repair Windows not re-install.
Often an ERD will help you when the recovery disk does not work.Download Windows 7 system recovery discs - charge now $9.75 for ISO
images to make the discs.
http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/How to create a Windows 7 - free system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html======================================
If necessary:
What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctlyHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorialsI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I try to print from quicken and I get an error message that says that I have to be in the mode of administration and run restore pdfdriver.bat. I don't know what is a mode of administration, nor I know what is a pdfdriver.bat. Can anyone help?
Hello
1. what operating system do you use?
2. what web browser do you use?
3. have you made changes on your computer?
4. What is the brand and model of the printer?
5. are you able to print from other applications?
When a printer is installed, members of the Administrators group on the computer are given permission to manage the printer by default. If you have an administrator account, you can probably change the printer properties. Otherwise, you must obtain permission to manage the printer before you can change the properties of the printer.
Method 1:
If you are using, I suggest you send the link to learn how to open a session as an administrator.
How can I connect as an administrator?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-log-on-as-an-administrator
Method 2:
I also suggest you to see link and check.
Error when printing to a PDF file: PDF driver is not found
Cannot print from Quicken
http://Quicken.Intuit.com/support/help/not-able-to-print-from-Quicken/GEN82237.html
-
I can't install the update to windows KB2680317 update for Microsoft Works 9. I get the error code 80070641, not 646. I tried Microsoft fixit and still no installation. Any ideas out there?
Hello
I would suggest trying the following methods and check if it helps.
Method 1:
Put the computer in a clean boot state, and then try to install the updates and check if it works.
How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.
Method 2:
Try the steps in the Microsoft article and check below if the problem persists.
The problems with the installation of the updates:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Method 3:
Try to download updates from the Microsoft Downloads Web site and check.
http://www.Microsoft.com/download/en/default.aspx
And also to try the steps in the following Microsoft article.
http://support.Microsoft.com/kb/818018/en-us
Hope the information is useful.
-
Someone at - he managed to get the "page not available" message when you try to download apps?
I recently joined the Adobe Creative cloud, but when I try to download one of the applications I get a blank page with the message "page not available", I tried both THE 11 and 14 of Chrome, both with the same results. I've also temporarily disabled firewall/scanner virus and anti spam, but without result. I use the optimized UK Server?
I think it's due to the interruption of the Adobe server / comms reset
Any ideas?
David UK
I have not seen other reports of this problem.
I suspect that you have a local network problem.
-
My emails are not sent and I get an error message - error 550 server windows live mail error ID 0x800ccc79.
Your help would be greatly appreciated
Thank you
original title: network
Hello GerryBenjamin,
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
Maybe you are looking for
-
My Macbook has big bumps and the screen does not close. Can it be fixed?
Previously, a fallen friend my 2013 non-retine Macbook Pro 13 inches on one floor wood to six feet in the air. After the landing, my laptop proceeded to bounce back, and when I picked it up, he had a gargantuan tooth in the DVD player (see these ima
-
Are the modules the SMEs as the pop ups?
Your 'help' sites speak of Add-ons. This morninng, that I could not open an E-mail because the quick scoring on screen says that my "pop-ups" were blocked.
-
Satellite A200 - CPU Upgrade possible?
Hello I want to upgrade my CPU.Currently a T2080 is installed and I would like to install a T7300? Can someone tell me if this is possible with my motherboard? The mother Board has the following features:Intel 940GML/943GML (Calistoga-GML) + ICH7-M /
-
Hello I get the error code, but get "transformation" and the control panel buttons are unusable. Fuser also runs hot, even after the replacement. I also saw a "system error: press ok to erase ' message. any thoughts?
-
Program network networking Internet website website URL website network I have to disable firewall to connect to the Internet. Also pop-up windows to make a dial-up connection, but we have a 2 connection wires to broadband? Help!