Web services does not work for Photosmart 7510

I just bought a Photosmart 7510 printer and I CAN'T get e-print and web services to work.

I already checked to make sure that the mapped IP addresses and I put a static IP address.

There is no new update of the product.

The utility application, your doctor, or whatever it is called found no errors.

There is no proxy server so that option is out.

I went through the troubleshooting step by step page, and nothing has worked.

It will print all day long from my computer, but whenever I try to implement Web services, it says "unable to connect to Web Services. Confirm access to the internet and try again. »

any further suggestions?

Hello

The servers are being updates not scheduled at this time. The best thing to do is to wait 1 to 2 hours at least and to 24 hours, then try again. If this is not enough, let me know and I'll see what I can do.

Tags: HP Printers

Similar Questions

  • my web button does not work for fast internet access. should what software I install

    my web button does not work for fast internet access. What software do I need to install. What past agter my hd crashed and I needed to replace it. THX

    Hello

    What is the model # computer? Check the following link to locate the model #:

    http://eSupport.Sony.com/us/p/support-info.pl?info_id=264#notebook

    You need Splashtop - software for fast Internet access. By pressing the "WEB" key when the computer is turned off, this software allows access to an Internet connection.

    Enter the model # below to check the software on the support page:

    http://eSupport.Sony.com/us/p/select-System.pl?Director=driver

    If my post answered your question, please mark it as an "accepted Solution".

  • Process, exposed as a web service does not work when it is deployed

    Hi all

    I have exposed a process as a web service (Web Service process) and you can call this from a Java Application locally. However, when I have that deploy the BPM server, I get an error. Y at - it a configuration change that I need to do when I deploy it on the server. I had used localhost for the webservice and also created a new server configuration and that associated with the process web service.

    Activity ' / TestingWebService # default - 1.2 / GlobalCreation [TestProcessCreationWS]' task "cannot run successfully.

    Activity ' / TestingWebService # default - 1.2 / GlobalCreation [TestProcessCreationWS]' task "cannot run successfully.
    Detail: method: ", Exception:"the task could not be completed successfully.
    Reason: ' fuego.soaptype.SoapExecutionException:
    return code: 404
    & lt;! DOCTYPE HTML PUBLIC & quot ;-/ / W3C / / DTD HTML 4.0 draft / / EN & quot; & gt;
    & lt; HTML & gt;
    & lt; HEAD & gt;
    & lt; TITLE & gt; Error 404 - Not Found & lt; / TITLE & gt;
    & lt; META NAME = & quot; GENERATOR of & quot; CONTENT = & quot; WebLogic Server & quot; & gt;
    & lt; / HEAD & gt;
    & lt; BODY bgcolor = & quot; White & quot; & gt;
    & lt; FONT FACE = Helvetica & gt; & lt; BR CLEAR = all & gt;
    & lt; Border = 0 cellspacing = 5 & gt; & lt; TR & gt; & lt; TD & gt; & lt; BR CLEAR = all & gt;
    & lt; FONT FACE = & quot; Helvetica & quot; COLOR = & quot; black & quot; SIZE = & quot; 3 & quot; & gt; & lt; H2 & gt; Error 404 - Not Found & lt; / H2 & gt;
    & lt; / FONT & gt; & lt; Table & gt; & lt; /TR & gt;
    & lt; / TABLE & gt;
    & lt; Border = 0 width = 100% cellpadding = 10 & gt; & lt; TR & gt; & lt; TD VALIGN = top WIDTH = 100% BGCOLOR = white & gt; & lt; FONT FACE = & quot; Courier New & quot; & gt; & lt; FONT FACE = & quot; Helvetica & quot; SIZE = & quot; 3 & quot; & gt; & lt; H3 & gt; RFC 2068 & lt; i & gt; Hypertext Transfer Protocol - HTTP/1.1 & lt; /i & gt; : & lt; / H3 & gt;
    & lt; / FONT & gt; & lt; FONT FACE = & quot; Helvetica & quot; SIZE = & quot; 3 & quot; & gt; & lt; H4 & gt; 10.4.5 404 not found & lt; / H4 & gt;
    & lt; / FONT & gt; & lt; P & gt; & lt; FONT FACE = & quot; Courier New & quot; & gt; Server not found anything matching the request URI. No indication is given of whether the condition is temporary or permanent. & lt; /p & gt; & lt; p & gt; If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. & lt; / FONT & gt; & lt; /P & gt;
    & lt; / FONT & gt; & lt; Table & gt; & lt; /TR & gt;
    & lt; / TABLE & gt;

    & lt; / BODY & gt;
    & lt; / HTML & gt;

    '.'

    Caused by: the task could not be completed successfully.
    Reason: ' fuego.soaptype.SoapExecutionException:
    return code: 404
    & lt;! DOCTYPE HTML PUBLIC & quot ;-/ / W3C / / DTD HTML 4.0 draft / / EN & quot; & gt;
    & lt; HTML & gt;
    & lt; HEAD & gt;
    & lt; TITLE & gt; Error 404 - Not Found & lt; / TITLE & gt;
    & lt; META NAME = & quot; GENERATOR of & quot; CONTENT = & quot; WebLogic Server & quot; & gt;
    & lt; / HEAD & gt;
    & lt; BODY bgcolor = & quot; White & quot; & gt;
    & lt; FONT FACE = Helvetica & gt; & lt; BR CLEAR = all & gt;
    & lt; Border = 0 cellspacing = 5 & gt; & lt; TR & gt; & lt; TD & gt; & lt; BR CLEAR = all & gt;
    & lt; FONT FACE = & quot; Helvetica & quot; COLOR = & quot; black & quot; SIZE = & quot; 3 & quot; & gt; & lt; H2 & gt; Error 404 - Not Found & lt; / H2 & gt;
    & lt; / FONT & gt; & lt; Table & gt; & lt; /TR & gt;
    & lt; / TABLE & gt;
    & lt; Border = 0 width = 100% cellpadding = 10 & gt; & lt; TR & gt; & lt; TD VALIGN = top WIDTH = 100% BGCOLOR = white & gt; & lt; FONT FACE = & quot; Courier New & quot; & gt; & lt; FONT FACE = & quot; Helvetica & quot; SIZE = & quot; 3 & quot; & gt; & lt; H3 & gt; RFC 2068 & lt; i & gt; Hypertext Transfer Protocol - HTTP/1.1 & lt; /i & gt; : & lt; / H3 & gt;
    & lt; / FONT & gt; & lt; FONT FACE = & quot; Helvetica & quot; SIZE = & quot; 3 & quot; & gt; & lt; H4 & gt; 10.4.5 404 not found & lt; / H4 & gt;
    & lt; / FONT & gt; & lt; P & gt; & lt; FONT FACE = & quot; Courier New & quot; & gt; Server not found anything matching the request URI. No indication is given of whether the condition is temporary or permanent. & lt; /p & gt; & lt; p & gt; If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. & lt; / FONT & gt; & lt; /P & gt;
    & lt; / FONT & gt; & lt; Table & gt; & lt; /TR & gt;
    & lt; / TABLE & gt;

    & lt; / BODY & gt;
    & lt; / HTML & gt;

    '.
    Caused by:
    return code: 404
    & lt;! DOCTYPE HTML PUBLIC & quot ;-/ / W3C / / DTD HTML 4.0 draft / / EN & quot; & gt;
    & lt; HTML & gt;
    & lt; HEAD & gt;
    & lt; TITLE & gt; Error 404 - Not Found & lt; / TITLE & gt;
    & lt; META NAME = & quot; GENERATOR of & quot; CONTENT = & quot; WebLogic Server & quot; & gt;
    & lt; / HEAD & gt;
    & lt; BODY bgcolor = & quot; White & quot; & gt;
    & lt; FONT FACE = Helvetica & gt; & lt; BR CLEAR = all & gt;
    & lt; Border = 0 cellspacing = 5 & gt; & lt; TR & gt; & lt; TD & gt; & lt; BR CLEAR = all & gt;
    & lt; FONT FACE = & quot; Helvetica & quot; COLOR = & quot; black & quot; SIZE = & quot; 3 & quot; & gt; & lt; H2 & gt; Error 404 - Not Found & lt; / H2 & gt;
    & lt; / FONT & gt; & lt; Table & gt; & lt; /TR & gt;
    & lt; / TABLE & gt;
    & lt; Border = 0 width = 100% cellpadding = 10 & gt; & lt; TR & gt; & lt; TD VALIGN = top WIDTH = 100% BGCOLOR = white & gt; & lt; FONT FACE = & quot; Courier New & quot; & gt; & lt; FONT FACE = & quot; Helvetica & quot; SIZE = & quot; 3 & quot; & gt; & lt; H3 & gt; RFC 2068 & lt; i & gt; Hypertext Transfer Protocol - HTTP/1.1 & lt; /i & gt; : & lt; / H3 & gt;
    & lt; / FONT & gt; & lt; FONT FACE = & quot; Helvetica & quot; SIZE = & quot; 3 & quot; & gt; & lt; H4 & gt; 10.4.5 404 not found & lt; / H4 & gt;
    & lt; / FONT & gt; & lt; P & gt; & lt; FONT FACE = & quot; Courier New & quot; & gt; Server not found anything matching the request URI. No indication is given of whether the condition is temporary or permanent. & lt; /p & gt; & lt; p & gt; If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. & lt; / FONT & gt; & lt; /P & gt;
    & lt; / FONT & gt; & lt; Table & gt; & lt; /TR & gt;
    & lt; / TABLE & gt;

    & lt; / BODY & gt;
    & lt; / HTML & gt;


    fuego.papi.exception.ActivityFailedException: activity ' / TestingWebService # default - 1.2 / GlobalCreation [TestProcessCreationWS]' task "cannot run successfully.
    Detail: method: ", Exception:"the task could not be completed successfully.
    Reason: ' fuego.soaptype.SoapExecutionException:
    return code: 404
    & lt;! DOCTYPE HTML PUBLIC & quot ;-/ / W3C / / DTD HTML 4.0 draft / / EN & quot; & gt;
    & lt; HTML & gt;
    & lt; HEAD & gt;
    & lt; TITLE & gt; Error 404 - Not Found & lt; / TITLE & gt;
    & lt; META NAME = & quot; GENERATOR of & quot; CONTENT = & quot; WebLogic Server & quot; & gt;
    & lt; / HEAD & gt;
    & lt; BODY bgcolor = & quot; White & quot; & gt;
    & lt; FONT FACE = Helvetica & gt; & lt; BR CLEAR = all & gt;
    & lt; Border = 0 cellspacing = 5 & gt; & lt; TR & gt; & lt; TD & gt; & lt; BR CLEAR = all & gt;
    & lt; FONT FACE = & quot; Helvetica & quot; COLOR = & quot; black & quot; SIZE = & quot; 3 & quot; & gt; & lt; H2 & gt; Error 404 - Not Found & lt; / H2 & gt;
    & lt; / FONT & gt; & lt; Table & gt; & lt; /TR & gt;
    & lt; / TABLE & gt;
    & lt; Border = 0 width = 100% cellpadding = 10 & gt; & lt; TR & gt; & lt; TD VALIGN = top WIDTH = 100% BGCOLOR = white & gt; & lt; FONT FACE = & quot; Courier New & quot; & gt; & lt; FONT FACE = & quot; Helvetica & quot; SIZE = & quot; 3 & quot; & gt; & lt; H3 & gt; RFC 2068 & lt; i & gt; Hypertext Transfer Protocol - HTTP/1.1 & lt; /i & gt; : & lt; / H3 & gt;
    & lt; / FONT & gt; & lt; FONT FACE = & quot; Helvetica & quot; SIZE = & quot; 3 & quot; & gt; & lt; H4 & gt; 10.4.5 404 not found & lt; / H4 & gt;
    & lt; / FONT & gt; & lt; P & gt; & lt; FONT FACE = & quot; Courier New & quot; & gt; Server not found anything matching the request URI. No indication is given of whether the condition is temporary or permanent. & lt; /p & gt; & lt; p & gt; If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. & lt; / FONT & gt; & lt; /P & gt;
    & lt; / FONT & gt; & lt; Table & gt; & lt; /TR & gt;
    & lt; / TABLE & gt;

    & lt; / BODY & gt;
    & lt; / HTML & gt;

    '.'

    at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:205)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:335)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:252)
    at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl_1001_WLStub.runGlobalActivity (unknown Source)
    at fuego.papi.impl.j2ee.EJBProcessControlInterfaceWrapper.runGlobalActivity(EJBProcessControlInterfaceWrapper.java:2033)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:72)
    at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:116)
    at fuego.papi.impl.j2ee.EJBProcessControlHandler.invoke(EJBProcessControlHandler.java:70)
    to $Proxy100.runGlobalActivity (Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
    at fuego.lang.JavaObject.invoke(JavaObject.java:227)
    at fuego.papi.impl.j2ee.EJBExecution.next(EJBExecution.java:189)
    at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:177)
    at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
    at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
    at fuego.web.papi.TaskExecutor.runApplicationTask(TaskExecutor.java:349)
    at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:95)
    at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
    at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:228)
    at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:219)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
    at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:61)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:226)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at fuego.web.filter.SingleThreadPerSessionFilter.doFilter(SingleThreadPerSessionFilter.java:64)
    at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
    at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3393)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs (unknown Source)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
    Caused by: fuego.lang.ComponentExecutionException: the task could not be completed successfully.
    Reason: ' fuego.soaptype.SoapExecutionException:
    return code: 404
    & lt;! DOCTYPE HTML PUBLIC & quot ;-/ / W3C / / DTD HTML 4.0 draft / / EN & quot; & gt;
    & lt; HTML & gt;
    & lt; HEAD & gt;
    & lt; TITLE & gt; Error 404 - Not Found & lt; / TITLE & gt;
    & lt; META NAME = & quot; GENERATOR of & quot; CONTENT = & quot; WebLogic Server & quot; & gt;
    & lt; / HEAD & gt;
    & lt; BODY bgcolor = & quot; White & quot; & gt;
    & lt; FONT FACE = Helvetica & gt; & lt; BR CLEAR = all & gt;
    & lt; Border = 0 cellspacing = 5 & gt; & lt; TR & gt; & lt; TD & gt; & lt; BR CLEAR = all & gt;
    & lt; FONT FACE = & quot; Helvetica & quot; COLOR = & quot; black & quot; SIZE = & quot; 3 & quot; & gt; & lt; H2 & gt; Error 404 - Not Found & lt; / H2 & gt;
    & lt; / FONT & gt; & lt; Table & gt; & lt; /TR & gt;
    & lt; / TABLE & gt;
    & lt; Border = 0 width = 100% cellpadding = 10 & gt; & lt; TR & gt; & lt; TD VALIGN = top WIDTH = 100% BGCOLOR = white & gt; & lt; FONT FACE = & quot; Courier New & quot; & gt; & lt; FONT FACE = & quot; Helvetica & quot; SIZE = & quot; 3 & quot; & gt; & lt; H3 & gt; RFC 2068 & lt; i & gt; Hypertext Transfer Protocol - HTTP/1.1 & lt; /i & gt; : & lt; / H3 & gt;
    & lt; / FONT & gt; & lt; FONT FACE = & quot; Helvetica & quot; SIZE = & quot; 3 & quot; & gt; & lt; H4 & gt; 10.4.5 404 not found & lt; / H4 & gt;
    & lt; / FONT & gt; & lt; P & gt; & lt; FONT FACE = & quot; Courier New & quot; & gt; Server not found anything matching the request URI. No indication is given of whether the condition is temporary or permanent. & lt; /p & gt; & lt; p & gt; If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. & lt; / FONT & gt; & lt; /P & gt;
    & lt; / FONT & gt; & lt; Table & gt; & lt; /TR & gt;
    & lt; / TABLE & gt;

    & lt; / BODY & gt;
    & lt; / HTML & gt;

    '.
    at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:1000)
    at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1175)
    at fuego.server.execution.TaskExecution.invoke(TaskExecution.java:428)
    at fuego.server.execution.GlobalTaskExecution.invoke(GlobalTaskExecution.java:146)
    at fuego.server.execution.TaskExecution.executeCIL(TaskExecution.java:554)
    at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:738)
    at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:698)
    at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:178)
    at fuego.server.execution.GlobalTaskExecution.executeGlobalCIL(GlobalTaskExecution.java:116)
    at fuego.server.execution.GlobalTaskExecution.executeGlobalCIL(GlobalTaskExecution.java:96)
    at fuego.server.execution.microactivity.GlobalCreationMicroActivity.execute(GlobalCreationMicroActivity.java:109)
    at fuego.server.execution.microactivity.GlobalInteractiveMicroActivity.execute(GlobalInteractiveMicroActivity.java:73)
    to fuego.server.AbstractProcessBean$ 41.execute(AbstractProcessBean.java:2725)
    to fuego.server.execution.DefaultEngineExecution$ AtomicExecutionTA.runTransaction (DefaultEngineExecution.java:304)
    at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
    at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
    at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
    at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
    at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
    at fuego.server.AbstractProcessBean.runGlobalActivity(AbstractProcessBean.java:2718)
    at fuego.ejbengine.EJBProcessControlAdapter.runGlobalActivity(EJBProcessControlAdapter.java:1036)
    at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl.runGlobalActivity(EJBProcessControl_1zamnl_EOImpl.java:2582)
    at fuego.ejbengine.EJBProcessControl_1zamnl_EOImpl_WLSkel.invoke (unknown Source)
    at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
    ... more than 49
    Caused by: fuego.soaptype.SoapExecutionException:
    return code: 404
    & lt;! DOCTYPE HTML PUBLIC & quot ;-/ / W3C / / DTD HTML 4.0 draft / / EN & quot; & gt;
    & lt; HTML & gt;
    & lt; HEAD & gt;
    & lt; TITLE & gt; Error 404 - Not Found & lt; / TITLE & gt;
    & lt; META NAME = & quot; GENERATOR of & quot; CONTENT = & quot; WebLogic Server & quot; & gt;
    & lt; / HEAD & gt;
    & lt; BODY bgcolor = & quot; White & quot; & gt;
    & lt; FONT FACE = Helvetica & gt; & lt; BR CLEAR = all & gt;
    & lt; Border = 0 cellspacing = 5 & gt; & lt; TR & gt; & lt; TD & gt; & lt; BR CLEAR = all & gt;
    & lt; FONT FACE = & quot; Helvetica & quot; COLOR = & quot; black & quot; SIZE = & quot; 3 & quot; & gt; & lt; H2 & gt; Error 404 - Not Found & lt; / H2 & gt;
    & lt; / FONT & gt; & lt; Table & gt; & lt; /TR & gt;
    & lt; / TABLE & gt;
    & lt; Border = 0 width = 100% cellpadding = 10 & gt; & lt; TR & gt; & lt; TD VALIGN = top WIDTH = 100% BGCOLOR = white & gt; & lt; FONT FACE = & quot; Courier New & quot; & gt; & lt; FONT FACE = & quot; Helvetica & quot; SIZE = & quot; 3 & quot; & gt; & lt; H3 & gt; RFC 2068 & lt; i & gt; Hypertext Transfer Protocol - HTTP/1.1 & lt; /i & gt; : & lt; / H3 & gt;
    & lt; / FONT & gt; & lt; FONT FACE = & quot; Helvetica & quot; SIZE = & quot; 3 & quot; & gt; & lt; H4 & gt; 10.4.5 404 not found & lt; / H4 & gt;
    & lt; / FONT & gt; & lt; P & gt; & lt; FONT FACE = & quot; Courier New & quot; & gt; Server not found anything matching the request URI. No indication is given of whether the condition is temporary or permanent. & lt; /p & gt; & lt; p & gt; If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. & lt; / FONT & gt; & lt; /P & gt;
    & lt; / FONT & gt; & lt; Table & gt; & lt; /TR & gt;
    & lt; / TABLE & gt;

    & lt; / BODY & gt;



    Thanks in advance.

    Hello

    Know how to feel. I have trouble sometimes get this working too.

    Finally, I created a small document that reminds me how to expose things like a web service for all the various versions you might encounter for WS PAPI, WAPI, etc.. :

    For 10g and Studio 6.0:
    -http://{MachineName}:9000/albpmServices/{Projectname}/ws/{Processname}ServiceListener?wsdl

    For 10g and Enterprise using WebLogic 6.0 go to:
    http://{MachineName}:7001/albpmServices/{engine-name}/WS

    For Studio 5.7, enter the URL:
    -http://{MachineName}:{WorkspacePortNumber}/workspace/webservices/ProcessService? WSDL

    5.7 Enterprise, enter the URL:
    -http://{MachineName}:{WorkspacePortNumber}/portal/webservices/ProcessService? WSDL

    For Studio 5.5, enter the URL:
    -http://{MachineName}:{WorkspacePortNumber}/{projectname}/webservices/ProcessService? WSDL

    Hope this helps,
    Dan

  • Web service does not work via XMLhttprequest

    Good evening

    I have a problem with calling a web service from Javascript for my Web application work.  I believe it has something to do with the url of the web service, but could use help from anyone.  First turn off the Service works fine on my development computer (using Visual Studio to test via Javascript without an application Web works).

    -Windows XP SP2

    -ASP.Net Web service located on the local host.

    -Eclipse IDE for Java Developers (just downloaded today)

    Version: Helios Release

    Build id: 20100617-1415

    JavaScript code:

    Hello

    Managed to do work on my Simulator (beta2) call a webservice, I was running and debugging in Visual Studio 2010.

    You code looks similar to the most  - except:
       - haven't got the ActiveXObject code
       - I specify the MimeContent e.g. ('application/x-www-form-urlencoded')
         see sample code below ...
       - I set access permissions in config.xml
           e.g. :     
           e.g. :     
           e.g. :     http://mydomain.com" subdomains="true" />
    
       - also check xml.responseText which might be set instead of responseXML
          if your mimetypes aren't correct
    

    Sample call:

        var url = "http://localhost/TestWebService1/service.asmx/HelloWorld";
        xmlHttp.open('GET', url, true);
        xmlHttp.onreadystatechange = callbackFunction;
        xmlHttp.setRequestHeader('Content-Type', 'application/x-www-form-urlencoded');
        xmlHttp.send(null);
    

    Reminder of the sample:

       function callbackFunction() {
           alert("callbackFunction enter");
    
           if (xmlHttp.readyState != 4)
               return;
    
           alert("callbackFunction response hdrs - " + xmlHttp.getAllResponseHeaders());
           alert("callbackFunction response text - " + xmlHttp.responseText);
           alert("callbackFunction response xml - " + xmlHttp.responseXML);
    
           // ....
           // ....
       }
    

    Hope that helps

    . H

  • Web Services does not work because the wwv_flow_collections view is empty

    Hello
    I followed this example to try to get a web service that runs in my application:
    http://Apex.Oracle.com/i/doc/advnc_rest_web_eg_2.htm

    When I run the page and enter the postcode 43221, they recommend a radius of 5, I get no results. When debugging and throwing the query into SQL Dev, I have no records in my opinion wwv_flow_collections . Looking at the tables that make up the view, wwv_flow_collections$ and wwv_flow_collection_members$, these two tables would join on c.id = m.collection_id only, but there are additional chooses online involving the DUAL table and that the query returns 0 records and so the view is empty. I have never messed with these views/tables, are generated automatically by APEX? Can they be updated? Right now I just can't get all web services to work because of this. This is the clause for wwv_flow_collections view:

    Of
    wwv_flow_collections$ c,.
    wwv_flow_collection_members$ m
    WHERE
    c.session_id =
    (
    SELECT
    v('SESSION')
    Of
    Double
    )
    AND c.security_group_id =
    (
    SELECT
    wwv_flow.get_sgid
    Of
    Double
    )
    AND m.collection_id = c.id
    AND c.flow_id =
    (
    SELECT
    NV ('FLOW_ID')
    Of
    Double
    );

    Can anyone help? Thanks in advance!
    John

    John,

    I have worked this week to set up exactly the same thing and got the same empty result set you have. In this case, I believe that this has nothing to do with the APEX. I downloaded 4.0.1 soapUI that tests web services and WSDL file described in the APEX Web Services tutorial for http://www.ignyte.com/webservices/ignyte.whatsshowing.webservice/moviefunctions.asmx?wsdl to create the same sample applications. She returns also no results.

    So, I decided to use a different WSDL public and try to make it work. Here are my steps below:

    BACKGROUND:
    -J' use APEX 4.0 on a database of 11 GR 2, with set ACL in place for what is APEX scheme using this application.
    -The site I used, I found via google. This is a webservice for currency conversion rate. It is explained here: http://www.webservicex.net/CurrencyConvertor.asmx
    -The WSDL can be found here: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL

    IMPLEMENTATION OF THE WEB SERVICE:
    1. in a new APEX application, I went to ' * shared components * "->" * Web Service references * "->" * create * ' to create a new web service reference
    2 selected Manual
    3. calls on the Web CURRENCY_TEST service
    4. set the URL http://www.webservicex.net/CurrencyConvertor.asmx
    5. set the Action http://www.webserviceX.NET/ConversionRate (Action can be found in the WSDL file - showing a few lines below)















    6 WSDL explains that the version is * 1.1* in this case. (However, this same WSDL has the same operation for 1.2 so it would probably work)
    7. No authentication
    8 soapUI 4.0.1 gave me the soap request which in this case is the following:





    #FROM_CURRENCY#
    #TO_CURRENCY#




    9 response stored in the collection CURRENCY_COLLECTION
    10 saved my web service reference
    11. test the web service reference (you must be on the web service references page and instead of displaying the report icon, use the display of the list.) Click the test to test the web service)
    12. on the test page, change #FROM_CURRENCY # USD (for U.S. dollars) and #TO_CURRENCY # EUR (Euros)
    13. click on the test button and you should see a valid soap response with a currency rate in ConversionRateResult tags

    USING THE WEBSERVICE AND GET RESULTS:
    1 is returned to the application and press on ' * Create Page * "->" * form * "->" * form and report on Web Service. "
    2 pick my CURRENCY_TEST web service reference
    3. following on the next page
    4. for input parameters, left the defaults to create 2 entries, From_Currency , and To_Currency
    5 SOAP Style for this is Document (found in the WSDL file as an attribute just after the soapAction in the WSDL snippet above attribute)
    6 message is literal format (also present in the WSDL: output for this operation under the attribute use above)
    7 XPATH is a bit complicated. In this case put * / ConversionRateResponse * (I used the soapUI 4.0.1 to send the request and soap response to see which would include the tags of the answer and that way I'll)
    8. message Namespace is http://www.webserviceX.NET/ (which is also present in the response soap message - I really recommend a tool to test it outside the APEX)
    9. for the names of parameters it is only one and it is ConversionRateResult (also present in the response soap message)
    10. Finish and run the report.

    OTHER TRAPS:
    So I finally got this to work, but in my case I asking a webservice to use and tags xml, that I'll be back are all xmlns:ns0 and all the tags response preceded ns0:

    In this case I had to after using the wizard to go back and change my request to change xmlns to xmlns:ns0 since the manufacturer applies only xmlns.


    select extractValue(value(t),'/*/ns0:Assigned_Group','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Assigned_Group"
    , extractValue(value(t),'/*/ns0:Assignee','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Assignee"
    , extractValue(value(t),'/*/ns0:Resolution','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Resolution"
    , extractValue(value(t),'/*/ns0:Status','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Status"
    from wwv_flow_collections c,
    table(xmlsequence(extract(c.xmltype001,'//ns0:HelpDesk_Query_ServiceResponse','xmlns:ns0="urn:HPD_IncidentInterface_WS"'))) t
    where c.collection_name = 'INCIDENT_TEST'

    Good luck!
    Jonathon

  • Single-pass does not work for Web sites after the last update of firefox

    Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.

    Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:

    • CTRL + SHIFT + a
    • "3-bar" menu button (or tools) > Add-ons

    In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.

    You may need to exit Firefox and start it again before it takes effect.

    A little luck?

  • I keep seeing pop up ads powered by '' cn tatami '' whenever I have to navigate using Safari or open a link on the FB Adblocker app does not work for this. Any suggestions? There is no option to cross the pop-up ad that it redirects to various Web sites.

    I keep seeing pop up ads powered by '' cn tatami '' whenever I have to navigate using Safari or open a link on the FB Adblocker app does not work for this. Any suggestions? There is no option to cross the pop-up ad that it redirects to various Web sites.

    Cache and history of the site Clear settings - Safari -.

    (1232)

  • WindowsXPSP3 / MSNDialup DOES NOT WORK FOR 6 weeks.

    WindowsXPSP3 / MSNDialup DOES NOT WORK FOR 6 weeks. I've been with remote access, since it was offered so I understand speed and ETC.

    Hot Mail (which I don't like) seems to work.

    On E-mail MSN - Cannot send or what I get Emails (all once in a while, we get... and when I go to Hotmail... arrived at 22). Spoke with 13 technicians, deleted all files (alt/shiftF9) 7 times. Some of the questions:

    MSN Inbox (on top left over files) continues to go to the yellow throttle and says I am offline and yet I am on line. Connection errors are the following: 0x80072efd / 0 x 0 80191002 / 0x80072eff deleted trash e.a. returns every time. Mark an unread Email and it is deleted. Tons and tons and tons of other issues. Microsoft Techs seem to be stuck on Shift/Alt/F9 and nothing is improving and sometimes gets worse... as the last time I alt/shif/F9...folders came back but old e-mail appears. Electronic mail in white and empty window. Super slow navigation & usually stops and tell me that I'm not online. Diagnosis of micro said: I am and contact MFG. A tech admitted that a new server is entered in questions. But 6weeks and I pay for the service? A tech says it's at my end frustrated, I got another PC, downloaded my MSN dialup and now... I stillHAVE questions about the addition of the computer. The 2 computers are not connected. Stand alones. Telephone lines checked. Audited modems. Microphone seems to keep secrets. And obviously can't solve my problems. Visibly frustrated spendinging 15 hours on the phone, and tired of the Microsoft Music on hold. Should I cancel? Today, same hot mail was. Using Internet Explorer, I get ERROR 500 messages or a web page from Microsoft to the particular address no longer exists. Unable to navigate while using MSN Internet Browser. What in the world that happens to us all the MSN people?

    Hi Buck,

    The question that you are running better agrees to the MSN forum at the link below.

    http://answers.MSN.com/forums.aspx?ForumID=c58ac82d-9d92-4FE0-8681-91e2d0bb1268

    For the related issue of Windows or anything related to the Windows operating system, do not hesitate to contact us and we will be happy to help you.

  • Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt

    Get the error 'windows wireless service does not work on this computer' diagnose in Wireless adapt. The same is not solved.

    I'm unable to locate networks wireless on my Windows 7 PC. Help, please.

    Try to uninstall/reinstall the drivers for your wireless network. You should be able to get them from from Toshiba Web site.

    I hope this helps.

  • HP 2000-2d29DX Notebook PC: intel rst service does not work

    Recently, I noticed the icon in the lower right of the screen showling the intel rst service does not work. In the past, I saw the icon, but it would correct themselves after a few minutes. A week ago I downloaded the Speedy PC Pro registry cleaner. Don't know weather or not to download that has something to do with the service of the RST. Help, please.

    Hi @aick,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop HP 2000 and the Intel Rapid Storage Technology Service is not running. Click the windows services key type.

    Verify your Intel Rapid Storage Technology Service is not on the manual and the service has been started. The service should be automatic and started. Once these settings are correct, restart the laptop.

    You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

    When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

    Thank you.

  • The family safety web filtering does not work after upgrade to Windows 8

    Hello, I upgraded a laptop for Windows Vista 8 and family safety works more fully.

    I have updated to the 2012 essentials and I can confirm that parental control is executed. App and time restrictions still work fine, but the filtering of the web site does not work.

    I have web filtering set to allow list only, with 3 sites listed - google, Wikipedia and BBC - but I can access all of the web content.

    I also tried to delete the files in ProgramData/Microsoft/Windows/Parental Controls such as suggested in other posts, but it did not work.

    I can also confirm that WpcMon.exe is running.

    Can you advise what could be the problem?

    Thank you

    Hello

    Thank you for coming back. Please note that the parental control is now integrated in Windows 8. The use of the parental control client that is included in Windows Essentials might not work properly. As before, you upgrade using Windows Vista, you can follow the steps described in this article (click on parental controls) to move properly the configuration of the client of parental control for the parental controls feature integrated in Windows 8.

    Note: Article also applies to Windows Vista.

    Please report if you need help.

    Kind regards.

  • Connection problem: The DHCP service does not work.

    Original title: connection problem

    After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

    Hello

    Follow these steps and check if they help.

    Step 1:

    Look for the DHCP Client service and DNS Client Services if they are started.

    a. Click Start.
    b. click on run and type Services.
    c. click right on - run as administrator.

    Check if the below mentioned services has mentioned State and type start.

    Client DHCP started Automatic\Manual.
    Client DNS started Automatic\Manual.

    Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

    To verify that double-click the service, and click the Dependencies tab.

    Step 2:

    I suggest you to reset TCP/IP settings to solve the problem.

    How to reset the Protocol Internet (TCP/IP)

  • Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

    My computer stops the update via WIndows Update Component

    Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

    My computer has a few updates, but can not run these update

    Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

    He starts to run updates 1 of 13... and stops

    If I shutdown normal e, computer stay likehanging 1 hour without stopping.

    I would like to know how to solve this problem

    Thank you

    Concerning

    Gladmar.

    Hello

    Were there any changes made on the computer before the show?

    Perform the following methods and check:

    Method 1:

    I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

    a. click Start, type services.msc and press enter.
    b. search Windows Update.
    c. right-click on the service and select Properties.
    d. in type of startup, select enable.
    e. click Start under the Service status.
    f. click OK.
    g. Repeat steps c to f for the following services:

    Background Intelligent Transfer Service
    Cryptographic services

    If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

    Method 2:

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Method 3:

    Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

    Disable the antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 4:

    The problem with Microsoft Windows Update is not working

    http://support.Microsoft.com/mats/windows_update/

    See also:

    Troubleshoot problems with installing updates
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Updates: frequently asked questions


    http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

    I hope this helps.

  • My audio service does not work - I can not use my pc on mode safe by minegold. How to return to normal

    my pc starts only in safe mode and I like the audio service is not running.

    for example, when I play something with you tube, I can see the video, but

    without sound.

    Hello

    Audio service does not work in Mode without failure.

    The services are very limited in safe mode.

    1. Close all running programs and open the windows if you are back on the desktop.
    2. Click on the Start () button.
    3. In the search box of the Start Menu, type in msconfig
    4. Then press enter on your keyboard.
    5. The System Configuration utility opens
    6. Make sure that Start Selection is set for Normal start.
    7. Click the Startup tab.
    8. Make sure you start is not checked
    9. Press the apply button and then press the OK button.
    10. Click the restart button to restart your computer.

    See you soon.

  • HP Scan does not work on Photosmart 6510

    HP Scan does not work with Photosmart 6510 wireless installation. I've deleted and reinstalled SW, SW, ran update doctor Scan and everything was reported OK. When I ran the scan test of the HP scan window comes but there is no value in the resolution box. When an analysis is attempted, I get ERROR SCAN only. I can scan successfully by other scanning programs.

    Paul sent me the log files, and from there, we followed the question until for the binary file HPScan.exe incorrect compatibility settings.   This file is located either in your "program files (x 86) \hp\\bin" directory (for 64-bit systems), or "program files\hp\\bin" directory for 32-bit systems.   In the case of Paul, his EXE was created to ensure compatibility for XP, which caused the application to try to use WIA 1.0 on a 2.0 WIA (Windows 7) system support.    This caused the app to not to interview the drivers for supported resolutions/etc and so the drop-down list is empty in the implementation of the resolutions.

    If other people see empty resolution lists in our application, it might be useful to double check that your EXE is not set to XP compatibility.

    Thank you

    Jeremy

Maybe you are looking for