Web services for Photosmart 7510

Installed photosmart 7510 to my network.  Wireless works fine, but can not access the web services.  Says the Internet is bad, but it works very well.

Let's set a static IP address for the printe give direct access to a DNS Server:

-Print a the front of the printer Network Setup Page. Note the IP address of the printer.
-Enter the IP address in a browser to reveal the internal settings of the printer.
-Choose the network tab, then wireless along the left side, then on the IPv4 tab.
-On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
-Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
-Enter the IP of your router (on the Page of the Network Config) for the gateway.
-Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS (DNS from Google).
-Click 'apply '.

Now, stop the router and printer, start the router, wait, and then start printing.

After that, you will have to redo 'Add printer' using the new IP address.

Tags: HP Printers

Similar Questions

  • Unable to choose Web services on Photosmart 7510

    The selection of the webservices I get a warning: Serverconnection error. I would like to pass this point. Can someone tell me how?

    Hello

    I believe you are trying to install your HP Photosmart 7510. I had a chance to test this printer last year, a quick and easy way: install from a computer that is connected to the internet through your home wireless network. Running on your computer, printer will get all THE information of network connection and you do not have to install from a small Panel on your printer.

    Please run the Setup program from the CD supplied with the printer.

    Kind regards.

  • A web service for windows authentication

    Hello
    I have a number of web services on a windows server.
    These web services are for a program client (in vb.net), access and retrieve data.
    This client program are launching for the PC of the individual user.
    The above configuration is in a windows domain.
    Currently, web services allow anonymous access. This means that anyone in the Organization, with the correct URL is able to trigger the web service.
    We are asked to remove anonymous access and all forms authentication configuration.
    Questions

    1. What is the best practice for configuration for a web service for windows authentication.

    2. We also have a couple of unix servers. They are required to access the web services (with the correct authentication). How can I get a cross-environment configuration?
    Thanks in advance.

    Hey Wee Hoe Chiang,

    The question you have posted is related to Windows Server and would be better suited to the TechNet community.

    Please visit the link below to find a community that will provide the support you want.
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

    I hope this helps.

  • How can I register a web service for BSE without JDeveloper?

    We use Oracle SOA Suite 10 g (10.1.3.3). We try to find a way to register a web service for BSE without using JDeveloper. All the docs and examples using JDeveloper. Everyone was able to do it with any other IDE or manually? If so, can you point me to this process?

    Thank you
    J

    When you deploy BPEL with JDeveloper processes are automatically enroll in BSE. If you want to do this without JDeveloper, you should use ANT, or BPELC / OBANT tool. These tools compile and deploy the process for the BPEL PM and register for BSE.

    http://orasoa.blogspot.com/2008/05/build-tool-deploy-AIA-BPEL-ESB-Java.html

    Marc

  • Web services does not work for Photosmart 7510

    I just bought a Photosmart 7510 printer and I CAN'T get e-print and web services to work.

    I already checked to make sure that the mapped IP addresses and I put a static IP address.

    There is no new update of the product.

    The utility application, your doctor, or whatever it is called found no errors.

    There is no proxy server so that option is out.

    I went through the troubleshooting step by step page, and nothing has worked.

    It will print all day long from my computer, but whenever I try to implement Web services, it says "unable to connect to Web Services. Confirm access to the internet and try again. »

    any further suggestions?

    Hello

    The servers are being updates not scheduled at this time. The best thing to do is to wait 1 to 2 hours at least and to 24 hours, then try again. If this is not enough, let me know and I'll see what I can do.

  • Impossible to activate the HP Web services for my HP Laserjet 200 MPF M276nw color

    Kindly help, I tried to update the firmware, but still my web services will not turn on.

    RGS

    G

    Hi GayleneC,

    Thank you for the update and additional information.  I really appreciate it.

    You indicated that you tried to update the firmware, I wonder because the printer is not connecting to web services that is may not have logged in to check the updates of the firmware.  I have included two links, one is for the Windows of HP LaserJet Pro Series Firmware Update Utility version , the other is for the Mac version of the HP LaserJet Pro Series Firmware Update Utility. Please choose your operating system and we will try and update the firmware without using the front panel of the printer.

    After you run the firmware update utility, please disable IPv6 wireless via built-in web server.  Please follow the steps below:

    1. To open the HP embedded Web server, type the IP address of product in a Web browser address line. When it opens, it should look like the screenshot below.

    2. Please click on the 'Network' tab as highlighted in the screenshot above.

    3. Please click on 'Advanced' in the side menu on the left as indicated above. Please disable IPv6 and click 'apply '.

    4. Please click on the "HP Web Services" tab.

    5. Please click on the button "activate". Print the newsletter of Web Services.

  • Web service for a more specific class when compiling

    Hello

    I just started using labview generator of the user Web interface and I have a problem when I generate the project.

    I recover data with the service and all works well when the application runs in the generator of the user Web interface of labview environment.

    But when I build the project, the Web API service is not recover my data. After a few debbuging, it seems that the problem comes from the block 'Parse Web Services', which returns nothing.

    Someone has an idea?

    Thank you

    I called the support OR and the response was:

    Name of the object should never have special characthers as e, to, o (in french) etc...

    The reason is that the application is generated by a server OR English on the web.

    So for the french, think of never having name determined that contains special characters.

    Otherwise, the application will run in the development environment but not after compilation by the server OR.

    Good bye

  • Cannot start the installation for Photosmart 7510

    Try to install the drivers for my 7510. I can't find my CD, so I downloaded the driver. When I try to install the driver for the complete package, the file itself, unpacks the computer thinks on this issue for a second and then more nothing. I also tried automatically detect it and install, and which does the same thing. I got a deskjet, 4100 home before this machine before, but I uninstalled all the software for it. I even ran Ccleaner and deleted a few HP registry entries after the problem started. The old printer has been disconnected from the computer. I checked the Task Manager, and I don't see that anything that looks like it could be installation listed in the listed processes. The printer is already connected to the network, and I've never connected it via USB. Computer is a Windows 7 64 based Q6600 2.4 GHz self-construction

    Thoughts from anyone?

    Hi robcorbin,

    When the download download files extracted, they are placed in a hidden temp folder. The best way to access the files is to type folder in the find programs and files and look for a folder beginning with 7z? In the folder, you will find the setup.exe file to install the printer. If you are still unable to install it in this way, the download file was damaged during download, and you will need to download the file again from the link below. Let me know what you find?

    HP Photosmart full feature software and drivers

  • Photosmart HP 7510: Ink for Photosmart 7510

    A person cannot buy any black ink 564 for the 7510 Photosmart cartridges leaner (as the color ones) or they are only those that will fit only in the slot of the picture now?  It cost me a fortune printing my school work.

    The skinny cartrdige with the bowtie symbol's picture, not black. See this page for more information.  The black cartrdige is 'fat' compared to the color or photo cartridges.

    Figure 1: Cartridge with the logo of the camera
  • With the help of an activity to run Web services for webservice secure.

    Hi when I try to use the activity run the Web Service, I get the error "' object Refrence not set by an object" . " My WSDL needs a credentials for acess.

    Can any one done in the face of the question before? Please help with resolution.

    Please find the attached images of W.F.

    Concerning

    REDA

    Normally, I saw this error when a field is missing entry or is not a valid XML code or something to that effect.

    I do a ton of work web based services and I never use the Execute. It is slower and I prefer to write my own web calls.

    To use the http web request for your case I would download and use SOAP UI.

    Load the WSDL in SOAP UI and it will help you to configure web calls that you can then transfer it to the http web request.

    If you need more information, I suggest you check some of my blogs. I have abit blog on custom creation and such.

    -shaun

  • Web service for private cloud OPA connectors

    Hello

    1. is there a pre-configured for Oracle HCM web services connector? The documentation (which is a web service connection?) specifies that "predefined web service connectors are available for some Oracle applications."

    2 are PL/SQ skills necessary to query and update the data source (Oracle), or the structure of connectors contains of classes/methods/etc, that to do this at a higher level (i.e. just by specifying the details of db connection & fields)?

    I am aware of the example of project (that I'll study in parallel), but just ask quickly here as well.

    Thanks in advance,

    Razvan

    I'm not aware of a web services connector pre-built from Oracle for HCM, but it is possible that there is something developed by a partner of Oracle.

    The structure of connectors is really an architecture and a set of definitions of the web services any connector must support. It is possible to build a connector that uses the JDBC API, PL/SQL, other Java API, or call other web services. The main requirement is that it should provide a mapping to something that resembles the structure of the Table/column/line/field expect web services of the OPA.

  • Create the web service for foreign service composite of soa

    Hello

    only a few things to know.

    Worth better tick: copy wsdl and its dependend in the project artifacts?

    Which option to choose in Participation of the Transaction?

    Tryng to create a Web service to call a service proxy on OSB.

    Thank you.

    Fairlie

    Fairlie,

    Here you can find details on the transaction of participation parameter values - http://docs.oracle.com/cd/E25054_01/dev.1111/e10224/sca_bindingcomps.htm.

    This setting basically said if the appeal service should participate in the transactions of the process (if there is). If you want to keep the transactionality between the process and the OSB service, you'd better direct soa user liaison who takes in charge transactions. If you the OSB is transactionless, you can leave it blank.

    With respect to the WSDL, I would avoid the copy, but you should interest you when you deploy your process between different environment, for example, test, and production. In this case, you provide the configuration level to replace the URL of the WSDL for production test.

    See you soon,.

    Anatoli

  • Test a REST based Web Service for Oracle R12.2.3

    Using the Oracle Support document,

    Installation of Oracle E-Business Suite integrated SOA Gateway, version 12.2 (Doc ID 1311068.1()

    I was able to deploy the REST web service based to FND_USER_PKG as FndUsrPkgSvc.

    I am able to view the file w.


    How once on the test REST based Web service?


    There is everything by deploying a REST Service Secuirty next note

    How this only plays a role in testing the web service.



    REST service security

    REST Web service is secure basic authentication HTTP to the HTTP Transport level. Send any of the following in the "Authorization" header according to the basic HTTP scheme:

    -Username:Passwod

    -Security token.

    Tip: Use connection Service to get a token of security for account taken of the user credentials.



    Thank you

    Rohit



    The guidance provided in the Guide of the SOA (156 Pg) developer are very useful, and once followed step by step allows not only to deploy, but also test the REST web service.

    Rohit-

  • Basic authentication for the WSDL Web Service for load test

    I am trying to load test a web service; the URL of the WSDL is behind a user name and password using http basic authentication. I can add the URL of the WSDL without problem with the user name and password, but when I read the script, I receive a "401 Unauthorized" errors

    I looked at the preferences > recording > Web Services > the Proxy Configuration, and then refer you to the preferences > recording > HTTP > the Proxy settings. I also looked at similar settings under Preferences > reading.

    I'm running OpenScript (9.1), how to configure it...?

    Thank you very much!

    KM

    Published by: KM 14 Sep, 2011 12:12

    Hello

    You can right click on the section to initialize your script and then:

    Add-> other-> HTTP-> authentication.

    You need 3 parameters:

    A - http://someurl - url that will authenticate any url that contains the http://someurl string for example http://someurl.com/index.html
    A password
    A user

    The following code should be added in your script:

    http.addAuthentication("http://someurl", "username",
                        deobfuscate("5blNah5kX/XuZnepYwInFw=="));
    

    Hope this helps

    Alex

  • How to invoke Web service for each row of a result?

    Hello
    I have an application that has a report on my old system tables. But for every line of this request, I have to go to Oracle EBS and return a value. The simple approach would be to create a link of database between these 2 databases, but for reasons of security in my company, which is not allowed. So, I built a Web service based on a PL/SQL function stored in the database of the EBS. The Web service has been tested and it works very well. This webservice takes 2 parameters, and returns a number. I would like to call it for each line of the report query result, the parameters passing the columns of the query. Is this possible?
    Thanks in advance!

    Published by: Ygorc on December 17, 2009 16:09

    No, I suggested me not to use UTL_DBWS. Flex-ws-api is... Jason Comment should I say... much more flexible, functional and reliable.

    Tyler Muth
    http://tylermuth.WordPress.com
    [Oracle security application: development of secure database and Middleware environments | http://sn.im/aos.book]

Maybe you are looking for

  • MacBook pro 13 "rankles more

    I have a MacBook Pro (13 inch, mid-2012), 2.9 ghz processor intel core i7, 8 GB of memory, graphics Intel HD Graphics 4000 1536 MB.  I upgraded OS to X EL Capitan 10.11.5 worm (15F34), two weeks back. Since then, my laptop gets overheated in a min wh

  • Need help for upgrade

    Hi my laptop is a HP Pavilion G6 product number: D5F44PA #ACJ currently I have 8 GB of RAM I want to switch to 16 GB but is not portable plug from motherboard. Please advice.

  • Installer of heel

    I'm still working with XP and I get a popup that says "Installer Stub" has stopped working.  It gives me the option to send an error report or not to Microsoft.  Of course he doesn't let me because Microsoft does not support XP more.  But I can't get

  • Windows 8 drivers for my HP pavillion dv7 6143 cl

    I've recently updated my computer Windows 7 to windows 8.  I did a complete reset, so I lost all my other software in the process.  Now, I am looking for some drivers and return programs that were not automatically by windows 8.  Specifically, Miss m

  • My 6500 printer prints my page of email without the printer code. Help!

    Can someone tell me why the page prints without the printer code