Web sharing guest network

Similar Questions

• I want to use web sharing in windows 7, how can

  pls talk to me earlier in the topic

  Web sharing option available after the installation of IIS in WinDOWS xp

  but in windows 7 it is not

  pls guide me in this regard

  your

  SOM

  Hello

  In Windows 7, files, folders, printers, and other devices can be shared with other computers on your network. This is accomplished by accessing a folder, right-click on it and choose the sharing tab. You can share all printers to your network by doing a right click on the printer to share. As long as your computers are on the same workgroup, you should be able to find these devices.

  In Windows 7, a new option was introduced called homegroups. You can create a homegroup to share files more easily between systems.

  Reference:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finish

  Hope this helps and keep us posted.

• Problem guest network

  I've recently reconfigured my network as follows:

  Modem > router Netgear FVS318G > two airports in mode bridged (by Ethernet cable) another joined the network for AirPlay.

  The guest network problems DHCP configuration. My first thought was to turn it off. However, when I turn off the toggle, the network remains around. Ideally, I would like to configure a VLAN 2 so that the client's network could still be used (primary wifi I want on the VLAN 1) but if this cannot be done, so how can I turn off the radio comments!

  Any suggestions would be greatly appreciated.

  The airport network comments feature will not work properly unless your router 'first' AirPort is set up for DHCP and NAT.  The comments feature does not work when the first or main airport is configured in Bridge Mode.

  Once the 'main' airport set up to do DHCP and NAT, then it is possible to build another airport 'downstream' of the first and extend the functionality of comments like that.

  If your two airports must remain in Bridge Mode... (they will probably stay in bridge, since you already have another router upstream, and you probably don't want to mess with the complications of a NAT Double error on the network), then you can disable comments on the routers of the airport.

  'How' you do this depends on the version of AirPort utility that you use to administer airports.  Please open AirPort Utility, click on the menu of AirPort Utility in the upper left of the screen, and then click the AirPort Utility.  After back with the version number that you see here.  Example is below:

  

• Unable to connect to localhost - web sharing does not?

  I recently upgraded from the Mavericks to El Capitan. Before the upgrade, I could go to localhost/folder/file to test php files that I had in Library/WebServer/Documents/but since the upgrade I just get "Unable to connect" message in my browser.

  The first thing I checked was in system preferences > sharing Web. It was not so I have tried to market. When I do the cursor moves on IT and the words say "web sharing is on", but the dots are red. If I close the web sharing control panel and reopen it is OFF.

  The second thing that I tried was running on apache in the Terminal, but he says that it is already running.

  Then I tried this trick and got the following error:

  apachectl configtest

  AH00526: Error on line 20 of /private/etc/apache2/extra/httpd-mpm.conf syntax:

  Command not valid 'LockFile', perhaps misspelled or defined by a module not included in the server configuration

  Have tried Googling this syntax error and tried a few solutions, but just make more and more confused now. Maybe someone out there better than I understand what is happening? Thank you very much in advance.

  What is in your file httpd - mpm.conf around line 20.

  I have no reference to "LockFile" anywhere in the config file, so looks like there's something wrong with the file.

• Why can't I configure guest network?

  TV, telephone and Internet are brought home through fiber TDS and distributed to households through ethernet.

  Actiontec modem/router (Model T 2200 H of TDS), is connected via LAN to my Airport Extreme (model HE ME918 / bought 08/09/15), and the primary network works fine.

  Recently, I tried to set up a network of comments and set up a name and a password. iPad, laptop or phone unable to connect to the Guest network.

  I have not noticed any IP address, subnet mask, router, DNS and search domains in the boxes associated with the network of comments.

  Is the router "does not fully with Airport Extreme" or something else.

  TDS is very focused on the PC and I found even any reference in section helps the router that they issued me so I'm not very confident that they will be a lot of help.

  Thank you in advance for any help posted here.

  Why can not put in place a network of comments?

  You have an Actiontec modem/router...and that you need a simple modem... If you want the function of feedback network works on the AirPort Extreme.

  When AirPort Extreme "sees" another router on the network, it is configured in Bridge Mode in order to avoid a situation where you have two routers on the same network, the two try to act as routers. That will produce any IP address conflicts and another called problem Double NAT... you do not want on your network.

  Unfortunately, the AirPort Extreme network comments feature won't work correctly when the AirPort Extreme in Bridge Mode.

  If Actiontec modem/router can be configured to operate as a simple modem.. .not one router... so the network comments feature will work correctly on the AirPort Extreme. Check with your provider to see if this could be a possibility.

• How is "Guest network" differs from the main network?

  I just purchased and installed a refurbished Airport Express. Everything works fine. In the installation program, it gave me the opportunity to create a network of comments, which I did and it works. My question: How is this different guest network from my main network?

  "Guests" that connect to the network comments can only access the Internet.  They cannot "see" devices on your main or private network.

  So if you want to not "invited" to see your personal devices and possibly see your private data on your computer or computers on your private network... or... you don't want to give "guest" password to your network private... it makes sense to leave the 'invited' to use the guest network.

• MAC filtering with guest network

  Hello, I have E4200v2 of Cisco, and after someone hacked password of my router, I was forced to activate a white list of MAC filtering. Problem is that I also like to activate a network of comments so my small business clients could still connect to the wifi, without acceding to out to home PC (and drink our bandwidth).

  Is this possible? Thank you.

  1. make sure that disable WPS.

  2 change the router password on the Administration page to guarantee something.

  3 make sure to disable remote management.

  4. set WPA2 Personal with a new strong password.

  5 disable the feedback network.

  That will protect your network. Piracy is not possible unless someone passes the WPA2 password or have access to the router and ethernet ports.

  The MAC filter won't help you. MAC addresses are transferred, are easily picked up and not cloned.

  If you want to activate the guest network you must accept the fact that other computers connect to your guest network and try to access the internet from there. They manage unless they know the password, but still, they can connect to the guest network because it is not protected. Only access from the network invited to the internet is protected.

  He must also accept the fact that you can "drink your bandwidth. If you do not like who don't offer guest access.

• Guest network: ESET detects open network

  A parent has an EA6400. It has established its guest access. A guest the latter using an Android with ESET security phone received the following message:

  

  Security risk

  Connected to 'XXPrivateXX-comments '.

  Open network

  ESET recommends:

  Connecting to public Wi - Fi networks without encryption, your data can be easily captured by the eavesdroppers. Watch by accessing or submitting sensitive information over public networks without encryption application.

  Its 2.4 GHz and 5 GHz both have security mode WPA2-Personal. The router is password protected.

  Why the Android with ESET phone give the message in bold above? And what can we do?

  Hi, KStecyk. The guest network on the router Linksys EA6400 seems to be an open network, it doesn't have a lock on it, and he just allows you to connect automatically. However, once you connect to your phone's browser, it will ask you to type the password for comments before connect you to the internet. So it is always a secure network. You can check this link for the FAQ of the guest network: http://www.linksys.com/gb/support-article?articleNum=140727#q1

  Jay-15354

  Linksys technical support

• EA3500 - access guest network

  Help! Took me 10 years to get another router wireless home, because last time, it was fixed and people were practically parking in my driveway to use. In any case, I have a network of comments - without warranty. How the hell change it secure, or eliminate all guest network together?

  Great Jake. Thanks for the help!

• A single hard drive will not be shared on network. All other players share very well.

  A single hard drive will not be shared on network.  All other players share very well.  Don't have a homegroup installation because I also have XP machines.  The drive is on a windows machine 7.   I checked all the settings.  Of course, all the machines are on the same workgroup.  It's just 1 road.  The other 5 on this computer share very well.

  Hey Timmy,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, player does not network share.

  The problem may occur due to some network settings.

  Perform the steps from the link below and see if it helps.

  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps.

  Answer to us if you are experiencing problems with the sharing network or any Windows problem, and we would be happy to help you.

  Good day!

• Lightroom Mobile - share only specific photos using "collection of web sharing?

  Since Lightroom Mobile (without returning to the desktop application), is possible to share only specific pictures within a collection using the feature "collection of web sharing?

  For example, what I might share only 5 star rated photos? I want to be able to continue to edit a few photos of the same collection without sharing them. So just remove them from the shared collection are not a solution.

  A workaround might be to duplicate the collection as a new collection, allowing me to remove the pictures of the collection shared without losing the ability to edit shared photos. However, I do not think that this can be done in Lightroom Mobile either.

  What are my options?

  Alternatively, you can login to your lightroom.adobe.com account where sharing options allow you to share photos after the indicators of choice.

• WNR2020 - setting up the Web page that appears when you can access the guest network

  Someone knows how to set the Web page that appears when you access the network of comments? I use the WNR2020 router. Thank you very much.

  It can be done by using a different material.

  Above all, you will be able to find this feature in our product business and it's called the HTTP redirect.

  You can check some Points of access such as WAC720, WAC730.

• Cannot turn off or disable password protected sharing the network and sharing Center

  I'm trying to turn some pretty simple sharing of files between our windows PC (two portable minicomputers running under XP, a desk and a laptop running vista). File sharing functions between the XP computers. However, I am simply unable to influence the "password protected sharing setting" in the network and sharing Center. I check the option to turn it off and I get a click through UAC dialog window, the mouse cursor turns for a short time while as if windows is pretending to do something, but the password protected sharing setting is always on.

  I tried to disable Avira Antivir.

  I enabled the guest account and set its password to a string explicitly empty with net user guest «»

  Nothing helps.

  svampi,
  This knowledge base article can be useful for you.  Although the problem that it is designed for the difficulty is not the same as yours, the underlying cause is the same.  There is an article to 'fix', which means that you can click the 'fix' in the article so that it automatically fixed for you online or you can follow the instructions to edit the registry yourself if you feel capable of doing that.  So check that out and see if it helps with your problem:

  http://support.Microsoft.com/kb/947232

  Let us know if this can help, or if you still need help.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WAP321 captive portal - impossible to set up the guest network connection

  Hello community.

  I use two WAP321 with the latest Firmware (1.0.6.2) in a cluster.

  Both are connected to a switch SG300-10 (FW: 1.4.1.3) in Mode of L3.

  The switch is connected to a router RV130 (FW: 1.0.2.7).

  The router has Inter-VLAN-routing active and static routes for my VLANS configured.

  To one of the Interfaces of the router is a connected DNS/DHCP server that manages the resolution of names and the dynamic distribution of IP4 for my network.

  In my network, I have different VLAN for customers, management, server, test and the WLAN clients.

  So far so good.

  I have install on the WAP321 cluster, an intern (VAP0) and a guest WLAN (VAP1) using the Setup Wizard.

  Delivery of DHCP and DNS lookups are ok for two wireless LANs.

  Settings WAP VLAN and IP4 address are:

  -untagged VLAN: enabled

  -untagged VLAN ID: e.g. 3

  -Management VLAN ID: the same without tag VLAN ID

  -IPv4 parameters are static in the ip range of the VLAN untagged

  -DNS server are set to manual for a server in VLAN 4 and to 8.8.8.8

  My problem is that I can connect to the WLAN comments but I never get the captive portal login screen.

  The First-Instance Association captive portal is set to VAP1.

  The Configuration of the Instance in captivity 'Vérification' is located in the local.

  A group and users are configured.

  The customer obtain an IP address in the host IP address range VLAN and can search names and IPS, e.g. www.cisco.com.

  If I try to open a Web site, and then I get the message that the server did not respond.

  Impatience on your part.

  Best regards

  Rainer.

  That's great. I'm glad to hear that.

  Eric Moyers

• Base station disappeared after creating the guest network

  After you activate a burst network 2 things happened:

  (1) my original network is always visible, but you can not connect and it does not work.

  (2) all devices of the airport, including the base station have disappeared from the Airport utility.

  I can connect to the network invited near the base unit as expected. As all devices have green LEDs. However, I can't on the main network. And I can't do anything to solve that devices are not visible in the Airport utility.

  Help!

  The 'main' and 'guest' characteristic of network work properly If the right type of modem is used to enable these services.  That would mean a simple modem, as in the example you see just below:

  

  The main and guest feature will not work properly if you have a modem/router, also known as a gateway, as in the example below, which is the type of device that has a number of ISPs providing to their customers.

  

  
  

  Therefore, the first troubleshooting question here would be.. .what type of "modem" you?

  If you don't know what kind of modem you have, please post back with the number of brand and model of the device that you call your modem. (Please do not distribute private information, such as a serial number).

  Next question... base stations AirPort how do you have?

  Finally... to fix things, it may be necessary to connect your Mac directly to each base station by using a wired Ethernet cable... Since Wireless will not provide access to the settings on the airport using AirPort Utility if things are messy. Your Mac has an Ethernet port?