Webcam is currently in use or not plugged in using MSN on Satellite Pro

Hello

I built in webcam on Toshiba Satellite Pro, but trying to use through MSN it just says this:

Your conversation cannot begin because your camera is currently in use or not plugged in.
Make sure your camera is available and try again.
a built in webcam on the satellitle pro but trying to use through MSN I just got this message

I'm not good with laptops, someone help me?

Sam

Download driver Chicony Webcam set far from the section drivers from the Toshiba site
Install Vista Service Pack 1 or the 934374 patch: http://support.microsoft.com/kb/934374
Update of MSN and your other software based on the webcam

If you have Skype or another program that can use the webcam, make sure they are completely closed and not, sitting in the system tray.

Tags: Toshiba

Similar Questions

  • Webcam black when you use MSN on laptop Satellite Pro

    Guys... My cam built into my laptop Satellite Pro seems to work fine when I open... But when I use it with MSN Messenger its always dark... I want to say if I put it on the mood of night that would work with the cam software, but not with MSN.

    What should I do!

    Help please

    If you use MSN the webcam software shouldn't t be started and should not work!
    Disable the webcam software in msconfig. The webcam software should not start automatically when you start the laptop.
    Also, the MSN shouldn't t load. Also disable in msconfig.

  • Use SDHC with Satellite Pro M70

    Hello!
    My question is about the Satellite Pro M70 (PSM76) SD card reader. Can I use SD card 4 GB or more (SDHC)?

    All what I can say is: you can try to use it and I hope to be recognized correctly. I have Satellite M70, but I do not use SD cards and unfortunately can not test it on my laptop.

    Just test it. To be honest, I'm a bit skeptical about it.

  • DVD/CD burner is not recognized by XP on my Satellite Pro U300

    I just bought a Toshiba U300 Satellite Pro with Vista installed :-(.

    For my work, I need to use software that is not compatible with Vista... so I installed my XP - pro software.
    I ran Windows Update a few times, until there is nothing to update.
    I installed all the drivers on the Toshiba site.
    I've updated the BIOS.

    Everything seems to work, butX-(the DVD writer is recognized as "UNIDAD DVD-RAM (e :))"
    XP just a READER of CD/DVD, not recognize... a WRITER and I am absolutely sure that he's a WRITER, because I used it on Vista to burn a bootable cd.

    Someone knows what to do?

    Hello

    I think that this can be resolved very easily.
    Go to the properties of the CD/DVD (right click > properties), select the tab called record.
    There, you must activate the option called CD (mark) activate recording.

    By the way; have you tried to use a burning like Nero for example software?
    Check it!

  • Laptop goes down when using the internet - Satellite Pro L100

    Hi, I had my laptop (satellite pro L100) 5 days and I connect through a router to the internet, but in the last days when im using the internet, a Help window automatically opens and approximately 90 internet Explorer windows open, it became really frustrating, im using norton which came with it, everyone has ideas ive ran a scan for virus and adaware but came up with nothing

    Thank you

    Mark

    Hello

    I understand you very well. For me it s a shock if 90 IE Windows would appear on my small laptop screen. SHOUT OUT! : O

    However, have you installed any 3rd party applications that can open the windows?

    I think that this is not a normal state of the system and if it appears the days of view therefore, you should try roll back BONE to the beginning.

    In addition, you can try to check in the MSCONFIG what background process runs on the operating system. If there are some very strange processes you must turn it off and you must remove the Autorun.

  • How to use Recovery on satellite Pro L10 with DVD drive broken?

    Hello...

    I have a satellite Pro L10, which is virused. I need to recover Windows. Unfortunately, I can not, because the CD/DVD drive is borked.

    I tried everything until and including the purchase of a laptop adapter HD, but my desktop computer is not a Toshiba so he does not have the recovery disk.

    I've never had to use a "recovery disk" before, so I have no idea how it works - apparently there should be a folder on my hard drive recovery? can someone tell me where I could find it? (I'm quite familiar with the innards of my installation of Windows and have never noticed before). Also, is it possible that this native recovery file has been compromised by my virus?

    Default: can it be fixed using an installation of LAN, and if so, could someone point me to instructions? (My BIOS allows booting from LAN, but not USB, which is irritating).

    Any other suggestions would be welcome.

    Thank you.

    Hello

    First of all you will not be able to use the Toshiba Recovery disk if you cannot use the CD/DVD drive.
    Why? Because you need to boot from the CD of recovery if you want to install windows from the CD from Toshiba.

    You ask how to boot from LAN?
    Well friend; I doubt that you will be able to do.
    First of all that this could be possible only if you have a RIS server.
    The Remote Installation Services can be installed optionally on Microsoft Windows 2000 Server, Windows Server 2003 or Windows Server 2008.

    It's really complicated and not easy for someone who has never done.
    If you want you can google a little how to create REEFS but in my opinion it s advisable to buy and compatible CD/DVD drive because the STRANGE can also be used for other purposes

  • Floppy USB drive not recognized when installing WinXP on Satellite Pro L40

    History:

    I bought a Satellite Pro L40, it came with windows vista. I can't stand vista windows for obvious reasons. so I formatted the HARD drive. I have a copy of windows XP.

    IV ' e read on the internet that I need Intel storage driver manager...

    IA´ve got the driver, he got on a floppy, and it does not, because when I start to install XP, it works (after pressing F6 & choose the driver to install). I come to the part of license agreement, press F8 accept...

    I select the partition I want to use (in format completely on vista). It starts to load more stuff... so he said "PLEASE INSERT LABELD - INTEL MATRIX STORAGE MANAGER DRIVER - DISK IN DRIVE A:" "PRESS ENTER WHEN READY."

    The disc that I used in the first place is always in. when I press on enter, nothing NOT to PAST (the USB floppy drive is not yet into action)

    How can I make it work? It is that I can get.

    I DON'T WANT BACK TO VISTA - HELP!

    This could happen if the floppy USB doesn t drive supports the standards of law. Some people have reported on different websites many floppy drives are not recognized.

    However, worry guy. I have a solution ;) (jeaaa: D)

    Try to create a new XP CD using the software called nLite!
    Then, you could include the SATA (Intel Matrix Storage Manager) driver in this new CD and then you could boot from the XP CD again.

    For details and how to use the nLite please Google because there are a lot of useful Web sites.

    Good bye

  • Question about the use of the Satellite Pro A60 fan

    Hello

    I intend to get a Satellite Pro A60 and I was wondering how much the fan turns on.

    Could someone comment if the fan turns on when the machine is totally inactive, and how he lights up when the machine is used for word processing and surfing the web?

    For example, when using normally does the fan turn on 1/10th of the time, or 1/2 time etc.?

    Thanks in advance,
    Pete.

    Hello

    Sorry I can't give you specific information about the cooling fan. A60 is known to me. It's a very nice laptop. Cooling vent is in reverse I am a pretty that there is no background noise.

    If you make the decision to buy it, look at what the capacity of the HARD drive is too high and that the DVD-ROM can burn a lot of different formats (DVD Super Multi drive).

    Have lots of fun with it.

  • Can what internal HD I use on my Satellite Pro A200 PSAE1E-01700EN5

    I need to replace broken my laptop internal HD. I was wondering, what HD internal I can for Satellite Pro A200 PSAE1E-01700EN5?

    The only one available to order for cheap's grand 250 GB, but my laptop will support it? I have 80 GB.

    Hello

    The Satellite A200 is a notebook of new generation that supports a SATA HDD controller.
    In my opinion, you can use a larger SATA 2.5 HARD drive like 200 or 250 GB.

    The laptop establish any problems!

    Check it out!

  • Are total prints Page current cumulative use? HP LaserJet Pro 200 color MFP M276nw

    I have a HP LaserJet Pro 200 M276nw MFP color

    Are total impressions on the Page report cumulative use for the life of the machine?

    I want to print a Page 'use' every month, because I want to know the total number of impressions (impressions & copies) I print every month, or between two dates for that matter.  This will also help me to know the number of impressions I get from my ink, etc.

    If the 'Total' Impressions is cumulative, then I can just subtract two numbers - one of the last - to get the difference.  But if this isn't the case, then I have no precise information.

    Help, please.

    Thank you.

    Yes, the total number of impressions is cumulative over the life of the product.

  • Using Bluetooth on Satellite Pro C850

    Hello

    I want to get my bluetooth to the top and runing but his past simply do not.

    I looked online and I had to download the appropriate driver and I did it, I have now all kinds of files from drive bluetooth.

    I clicked on the setting up of files and who crossed. Now when I click on add new connection, connections, parameters and the rest of the options, a new window comes up saying 'installation bluetooth reader' and then we constantly get to a point where a message appears and says _ ' Plase plug in bluetooth device and click on the OK button "but clicking on it annoys me further and the message appears again and again.

    Y at - it a setting or button or program I'm missing here?

    Thanks for your help!

    You have activated BT device?

    By the way: what model of laptop you have exactly?
    Are you using the original pre-installed OS that you got with your laptop?
    The whole story is a bit confusing for me. If you have original OS preinstalled, it contains all kinds of drivers, tools and utilities, so you should not install anything more.

    View the name of the model right, just to check if there is BT or not.

  • Can't use infrared on Satellite Pro M10 (UK version)

    Hello

    When I got this laptop the infrared device worked OK. I used it to transfer files, etc. It no longer works, so I tried everything to get it back (including downloading form this site - what is for Win2000). I've updated to XP SP2 but it still does not work. I uninstalled it, but whenever I try to re - install, it puts the PC directly into the "unknown device" category with one? mark next to it and it does not work. I lost the drive of TOSHIBA utilities, so I'm out of ideas. Help. Also, I have a proof of purchase (even if I am out of warranty) but I also lost my original recovery disks system too. Can I get that back with the disk utilities, either via download or better yet replacement CD. There are a lot of things goes a little wrong, so I really need a new facility, but without the disks I'm obviously stuck. Any help would be appreciated.

    Thank you
    Chris
    PLS reply to [email protected]

    Hello

    If you are missing a recovery CD you must go to a Toshiba Service partner and sign a solemn declaration (it is a restriction of the SP, the CD is OEM) then you will get a new! On the Tools CD, you can also request, but all drivers and utilities could also be downloaded

    https://EU.computers.Toshiba-Europe.com (drivers and downloads)

    Bye Bob

  • Do not connect WiFi always on my Satellite Pro P300-19 q

    Please help me... Please!

    I just got my new replacement P300-19 q after my previous had a defect on the keyboard AND the WiFi. My question remains however, WiFi is not connecting. OK, this isn't quite true, some how it connected last night after the service to Tiscali customer helped me Yes anf it is lit on the front of the unit. Tonight... no luck! I really think it's to do with the Toshiba ConFigFree software.

    Can please please please (on bent knees) anyone help?

    AFAIK ConfigFree is just surveillance and setting up a Wi - Fi connection software you probably use Windows settings.
    You can remove ConfigFree system and check if the WLAN connectivity will work better.
    Please test and send feedback.

    Also try restarting your router.

  • Power adapter can be used for a Satellite Pro M70

    power adapter can be used for a laptop Toshiba DC?

    Details:
    19V, 3, 42

    Thank you
    Arun

    Laptop Toshiba computers use a 19 V or 15 V adapter.
    You must first check the specifications of your laptop before connecting an AC adapter.
    But I would always use AC adapter provided with the laptop or an original part recommended by Toshiba

  • What Ram modules are used in the Satellite Pro L870 18R

    HYA

    I m new to this forum so apologies if I posted in the wrong place.
    I just bought a Sat Pro L870 18R for my wife as a Christmas pressy.
    Before she gets to him I was going to increase the Ram of 4 GB to 8 GB.

    I know he has a single stick of ddr3 1600 Mhz in it, but without opening it you know which manufacturer to use Ram Tosh for this machine?

    I like to keep the same manufacturer.
    If I can at least give him a chance to run dual channel. I know I couldn't just take part and look like I m going to have to open it to adapt to the new ram anyway.

    I just i didn t want to keep o he packing and unpacking, and opening and closing upward are a gift after all lol.

    Any help appreciated thnk

    Above all the RAM brand is very important to get the RAM running in dual channel.
    It is important that the two RAM modules will support the same features.

    As far as I know the unit was equipped with a SO-DIMM 4 GB RAM DDR3 1600 module MHz (PC3-12800). I guess the reference is: * PA3918U-1M4G *.

    Welcome them

Maybe you are looking for