Webcam of ACE is not found.

ACER ASPIRE ONE D150 NETBOOK WEBCAM NOT FOUND

MY ACER WEBCAM ASPIRE - D 150 - CAN NOT BE FOUND

Contact Acer for help with this problem since the webcam is installed, it can be either the webcam is disabled or if the driver does not that is why you are unable to locate him. You can contact the Acer Support by calling the (800) 816-2237 or by using the link below.

http://www.Acer.com/worldwide/selection.html

Tags: Windows

Similar Questions

  • Trust webcam video Full HD, not found by Skype

    Hello

    I have attached the webcam for my PC Windows 8.1. The webcam uses organic Windows drivers. There is no specific system of trust.

    I can see my webcam in the "devices and printers" section of Device Manager as well as in the Windows Control Panel, and I can use it in the camera of 8.1 of Windows application.

    But Skype (for desktop 6.22.0.107) can't find the webcam.

    Someone has an idea how to get my webcam to work in Skype, please.

    Best regards

    Achim

    I gave in.

    Dumped Windows 8.1.

    Reinstalled the system with Windows 7. Everything works perfectly.

    Thank you for your initiative,

  • Webcam not found.

    Hello guys,.

    I am again facing the same problem with the latest version of Skype, my webcam is not found... I feel already frustrated about this problem that cannot be solved once forever. I m on Windows 7 Ultimate 64-bit.

    Thank you for the support,

    They suggested to downgrade the version of Skype, but I tried it too, and older version of Skype does not open more new answer waiting too.

  • Re: Unable to use webcam - not found in the Satellite L670 Device Manager

    Hi, I'm french, sorry for my English.

    I can't use my webcam. not cam in Device Manager.
    I have download the latest drivers and it installed.
    I looked in the bios, cam is on, I am trying to turn off / restart / turn on. Updated BIOS updated.
    facial recognition work to, say "use by another program or not found" something like that.

    Can you help me?

    Thank you

    Hello

    It s not recognized in Device Manager?
    You have a few unknown devices in Device Manager?

    The webcam should be included under point: imaging devices
    You should see peripheral USB video.

    You see that?

  • Help my Lenovo G550 Webcam not found

    Help my Lenovo G550 Webcam not found

    It was working fine last night and I went this morning etil did not work!

    Help her bed to the ive tried caraa drivers

    Press fn + ESC to activate it.

  • Every time I open my webcaam is showing that not found webcam or webcam is not working properly

    Original title: webcam problem

    I have a laptop Dell Inspiron N4020 Pentium bicoeur with Uttimate 32 bit Win7. But now there is a problem. My web cam is not working. Every time I open my webcaam is showing that not found webcam or webcam is not working properly. I installed a new software of I m not successful. So now, how I have useful?

    Is - this problem is hardware or software. Every time I go to the Device Manager there is no camera or webcam device. Is there a solution?

    Thank you.

    HerohetoChakma,

    The webcam appears under devices in the Manager of imaging devices? In the contrary case and the computer is under warranty, contact the Support Technology Guide.

    You can try...

    Webcam test

    Rick

  • Webcam driver installed, windows search pilot, driver not found

    I recently changed from windows xp to vista, I bought a new webcam (philips SPC 230NC easy) and installed the accompanying cd. When I plugged the camera that a box appears in the lower right of the screen (install the software) it says not identified found device and promtps get me online software driver, but then can't find. my device hardware ID is USB\VID_093A & PID_262C & REV_0100 & MI_00

    The signature of the said problem as PnPDriver not found.  Also it is sometimes this INF file not found or something, error 409

    What happens on my laptop and desktop, any help much appreciated

    Hello

    1 did you encounter any error messages during the installation of the drivers?

    Method 1.
    I recommend you to download the drivers from the link below and check.
    http://download.P4C.Philips.com/files/s/spc230nc_00/spc230nc_00_pvt_eng.zip

    Method 2.
    If the error persists, remove all the drivers and the software for this device, and then reinstall.
    See the link below on the manufacturer's Web site.
    http://www.P4C.Philips.com/cgi-bin/dcbint/faqview.pl?CTN=SPC230NC%2F00&DCT=QAC&new_tmpl=1&refdisplay=WEBCAM_QAC_61090&refnr=0061090&scy=GB&SLG=Eng

    For more information, see the articles below.
    Installing new hardware: recommended links
    http://Windows.Microsoft.com/en-us/Windows-Vista/installing-new-hardware-recommended-links
     
     

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • With Windows 7 or 8 on my 2710p (built in webcam), the camera driver says "HP Webcam not found"

    I had the webcam on my 2710p with Windows 7 running for a while, but after I plugged an external webcam (I think it's marked Microsoft), it's almost as if my built in webcam dissappeared.  I tried to format the computer to Windows 7 and now Windows 8 (the two 32-bit), hoping that a new facility would solve the problem, but when I try and install the driver of webcam sonix from the page of drivers hp for the 2710p (with W7 Home Premium 32 bit drivers), it says "HP Webcam has not found! Please connect the HP webcam and then run Setup again. "The only unknown device in my device manager is the PCI controller, I don't really like.

    What happens here? I'm pretty tech literate, but I'm stumped here.

    Webcams are fragile and I suspect yours is dead. I think that it is a coincidence that it happened while you were using an external webcam.

  • built-in webcam not found in the Device Manager, Samsung r710 laptop, windows 7

    I have a laptop Samsung R710, who settled with Windows 7. The laptop came with a built-in webcam. I was not able to get a piece of software to recognize the camera. I did a system restore. Updated the drivers. Visited the Samsung website for updates. When I opened the Device Manager to see the drivers for the webcam, webcam not found in Device Manager.

    Any help to fix this would be greatly appreciated.

    Thank you, I must admit to thinking in the same direction you... buy a separate camera or wait until he is more under warranty and have a quick look at the wiring around the hinge.

  • I get "command not found" error to the linux terminal when you try to run the tar.bz2, ACE extracted in the installation instructions. Any advice?

    I extracted to the terminal linux firefox in my own repertoire and you try to run the executable file called firefox. But he's saying "command not found".

    You seem to have 64-bit Linux because Linux versions served on mozilla.org are 32-bit.

    FTP://FTP.Mozilla.org/pub/Firefox/releases/21.0/Linux-x86_64/

  • My Hp Pavilion dv99110 us Keeps giving me a message that my webcam device is not found. It came with a built-in webcam and I do not know how to reinstall! Help, please!

    It came with a built-in webcam and I do not know how to reinstall! Help, please! I don't know when it happened because I deliberately it

    Hello

    Make sure that you have the latest drivers and software for your machine

    http://WWW8.HP.com/us/en/support-drivers.html

    If necessary, try HP support

    http://WWW8.HP.com/us/en/contact-HP/contact.html

    or ask in the Forums of HP Support

    http://h30434.www3.HP.com/

  • Satellite P300: Error BSOD STOP: c0000139 {entry point not found}

    I had this error a few weeks on my Toshiba P300.
    When I start my laptop it appears a blue screen with an error for a fraction of a second:

    STOP: c0000139 {entry point not found}
    The procedure entry point ntoskrnl. ExiAcquireFastMutex is not found in the library of dynamic links Hal.dll.

    Then normal startup of Windows Vista.
    I get this error when I start the computer from the Hibernate mode. What does this error mean?

    I also have problems with my built-in webcam. I get the message: "locked by another application." I already reinstalled the software I downloaded from the site, but that did not help. The error has something to do with the webcam this doenst work properly?

    I put t know what can be the problem, but you must use restore system and OS rollback to an earlier time before this error message.

    Subject of webcam, please visit http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=131308

  • EliteBook 2540p: software of the camera not found or does not

    In my book it is built in camera. I want to capture still image with it. But I have not found any camera software therefor. Please give me a software camera matched with my model. Note that I have already installed driver webcam.

    One.

    Try this.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_131219_1&swEnvOid=4059#

    REO

  • Web Cam not found

    I have an acer aspire one ao531h-0bk. When I start the web cam application, he sends me an error message "webcam" not found although I have installed the drivers. Then after I click ok to this message, he sends other messages saying "can ' t built the graph". But some other times it starts without any problem.

    Geirgeo0,

    Thank you for the additional information. This new information leads me to believe that the webcam cable is pinched or causing a bad connection with the motherboard. In this situation, I recommend to contact technical support for assistance. It sounds like the cable or the other must be replaced or put back in place.

    Yet once again, I apologize that you encounter a technical problem with your product.

  • VAIO Webcam (VGP-VCC6) does not not after Win7 upgrade

    My laptop was recently changed from Vista to Windows 7 Ultimate. The only problem I've had is with the stupid webcam. I downloaded all the drivers for it and the webcam appears under 'devices & Printers' as "Composite USB device", but NOT in the Device Manager. How is this possible and what I am doing wrong? Not only that, but when I go into the Device Manager list of records continues expansion and contraction on its own (as he continues to try to download information).
    I also downloaded the ArcSoft WebCam companion 2 and when open it says "a webcam was not found or is not installed properly. Camera is in use by another application or not connected. »
    How can I solve this?

    The drivers I downloaded:
    Original - Sony Visual Communication Camera VGP-VCC6 Driver
    Original - Texas Instruments PCIxx12 Integrated FlashMedia Controller
    Original - the Sony Firmware Extension parser.

    your question is the USB driver, if it is an upgrade and not a clean install, point the pilot to the folder Windows, System32, INF, the next time he's looking for a new device. If she is not there at all unfortunately the only way to reinstall the USB controller is the recovery of Original OS (format back to Vista premium), then the return upgrade to Ultimate never completely uninstall the USB drivers. uninstall the RH only and restarted, it will rebuild if you ever have problems with USB driver. never remove the controller.

Maybe you are looking for

  • Colors tab

    I like the new Personas. But they do not go far enough. How can I change the aging of the unused tabs? I have serious vision problems and simply cannot read the content of each tab. So I do not know which tab to spend as needed.I need to change that

  • PowerSaver fatal error 0 x 0 occurs at boot

    In the last days (recent problem), I get the following when starting program legend "had a Toshiba Powersaver fatal error 0x0" ends. How to solve this please... in simple terms if possible for old fart with limited knowledge. Error "seems" to affect

  • Photosmart 6510 - unable to connect to internet (connection server error: - 1).

    How to make server connection works?

  • WinExplorer: SIZE of file and directory of research

    Windows Vista Ultimate Edition, all updates from MS (except WinLive was last updated)The remaining disk space: 8GB / 500GB I would like to determine the DIRECTORIES and FILES (outside of the file system) which exceed, 25 MB of space.  Is it possible

  • files deleted in error - how to recover?

    error 5 I was cleaning up my computer to the top when he accidentally delete some vital info. Since then, I have tried everything trying to get it back. I check the event log to back up the track, tried to use the command prompt using this I some how