Webcam problems - Studio One 1909

I have a problem with my webcam on my Studio One 1909 desktop.

When I run the central webcam I am informed that I have to 'close the other video streaming to start video' to use the webcam.

I just reinstalled Vista x 86 using the Dell Factory Image Restore function and that you have installed Vista SP2.

Any help would be greatly appreciated.

George

Webcam turned out to be defective and was replaced under warranty.

The driver for this device is here - Studio One 19 Creative Webcam

Test with AMCap demo v1.3.11.2 (live show)

Tags: Dell Desktop

Similar Questions

  • Dell (All in One) Studio One 1909/19 power start mystery

    A friend asked me to look at Studio One 1909 sister who does not illuminate.  She brought to Best Buy for repair and was told it was the motherboard and don't bother fixing.  When the computer is connected for the first time in the CD eject light doesn't light up for a short period and then goes out, no. fans no beeps... nothing.

    I tried a few things to get started, unplugged power wedge, CMOS battery check button to delete all connections etc... but he seemed dead and I was coming to the same conclusion that the technician at best buy, maybe bad power supply or motherboard dead.

    I called my friend and gave him the bad news and then he told me that he had the computer running after that he brought home from his sister's House.  He said all started and went very well and he left him when he went to sleep and when he woke up the next day it would not start no matter what he tried. He asked how the motherboard could be dead if he was running so well for 1 day.  I decided to give another glance to the computer.  I removed the power button checked, checked all the connections of power once more and did not find any obvious problems.  I plugged the computer while I had it put on the table, face down and left for a period of time before I went back to it.  I stood the computer up and to my astonishment started computer and everything went perfectly.  I was curious about what I touched to start.  My excitement lasted only until the next morning, when the computer will not turn on.  I came to the conclusion that the face of the computer down was the thing that allowed me to start the computer.

    I worked with the computer for a few days and understood that he would in a kind of "Eve" from 1 to 02:00 and to restart I have let face down for about 1/2 hour before starting the system.  I tried different things every night, unplug overnight, leaving to run, stop and leave it plugged in, and the results were the same every morning, regardless of how I left the computer the night before, he would not be running.  Last night after I left the computer face down and this morning I put it up and it starts right now.

    My theory is that some sort of pressure is put on the touchscreen sensors placing it face down and he wakes up the computer.  I tried many things before I discovered this trick.  I went to the CMOS settings, the first day I was able to start the computer and the only problem I noticed was that the date was wrong, so I fixed that and all reset the default settings.  I put the power options in windows to never go in mode "sleep" but I don't think that the operating system is in any way related to this problem as it would go in this hibernation even when unplugged.  I still think it's a motherboard problem, but do not know what could be the cause.

    I tried to update the BIOS A04 Version but I read in the forums about the systems in brick after the BIOS flash and I don't want to risk it with someone elses computer.

    Anyone have any ideas on what could be the problem?

    Dell Studio One 1909

    BIOS Version A04

    Pentium (R) Dual - Core [email protected]

    Memory 4 GB 800 MHz

    Windows Vista Edition Home Premium 64-bit

    I SOLVED it! My RESOLUTION was to buy a new power supply from DELL! Part # M117J. As soon as I gave up and connected the wires... I was able to press on the button / stop and HOP! He lit. Now, I'm going to fit everything back together... but I am sure that the Power Supply swap is the right way to go for the wrong unit we all! See you soon!

  • MY dell studio one 1909 screen problem

    Weird Ramdomly of my missing screen,

    Hello

    By asking where you are based, I mean what country you are currently.  If the problem persists, the best thing to do is support the appeal in Malaysia, but I hope it's fixed for now.

    Contact information for the Malaysia: en.community.dell.com/.../20203456.aspx

    Concerning

    Kevin

  • What to do when dell studio one 1909 screen is not calibrated

    I have effectively had to completely reinstall windows 7 on my computer due to a problem with the system and when I reinstalled all the software I found that when I start the software system touch will work on the login screen but once the computer is in touch is no longer work.  I tried to run the calibration of touch and it will turn on and will recognize that you are touching the arrow screene will always go to the top right of the screen and never go to the next part of the screen.  I found this key works perfectly with the program of the battery and that's it.  It's very strange how ts acting.  I have re-uploaded the application of touch screen without changing the performance so I am at a loss.  Of course, my mandate has missed 18 days ago go figure!. Any ideas?

    Hello

    Method 1: Clean boot

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Note: Follow step 7 of section of boot KB929135 to the computer in normal mode.

    Method 2: it seems that the drivers are not updated on your computer. So, I suggest you to update the drivers and check if that helps.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Update drivers: recommended links
    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

    You can download the drivers manually and install from the link below.

    http://www.dell.com/support/drivers/us/en/19/ProductSelector/Select/FamilySelection?CategoryPath=all-products%2Fesuprt_laptop%2Fesuprt_studio_laptop&Family=Studio&DisplayCrumbs=Product%2BType%40%2CLaptops%40%2CStudio&rquery=fkey-e-Drivers_PS

    Also, here are a few items of assistance that could help you with this. You can check those.
    http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_737099F9F10135FBE040AE0AB6E14629&isLegacy=true

    http://support.euro.Dell.com/support/topics/global.aspx/support/KCS/document?c=za&cs=RC1078563&l=en&s=pad&docid=DSN_737099F9F10135FBE040AE0AB6E14629&isLegacy=true

    I hope this information helps you!

  • PreSonus Studio One won't let me read the downloaded videos to unplug, the message reads "the licence has not been issued for this computer", the Logo ONe Sudio appear

    I downloaded a video of my own using the Firefox Addon to unplug myspace page. It saved in my files, but when I try to open it, I get a message that says: 'a licence was not issued for this computer. When I click 'ok', it brings me to the block Presonus Studio One asking me to purchase a license now. In fact, a licence was issued to this computer, and I understand that there is a problem with customers not getting Presonus does not properly established with the approval of their product. But it shouldn't stop me from playing my own videos on my own computer.

    Sorry, never heard of this software before. How are Firefox users able to listen to the music that is created b this software.
    A specific package of DRM?
    A specific plugin?

    As may of Adobe Flash?

    It seems that you have two plugins Flash for Firefox. Not a good idea because it may confuse Firefox. Try to get rid of the old version.
    Shockwave Flash 17.0 r0
    Shockwave Flash 16.0 r0

    Have you tried to get support through the PreSonus for one?
    https://forums.Presonus.com/

  • Since Windows 10 on Dell Studio One, impossible to scan with Pixma MG3100

    Since the installation of 10 window on a Dell Studio One, I was unable to analyze with a Pixma MG3100. I tried to install mp68-victory-mg3100-1_02-ea24, but only the driver of Canon IJ function tool made.  Although the Canon IJ Network Scanner selector EX appears in "Programs and features", it does not show an icon on the desktop.  Turn off the Avast firewall did not help to install.

    An older Dell desktop computer and a PC even older Toshiba laptop using the same printer, but have not had this problem after moving to Windows 10.  (Apparently Dell has nothing to do the Studio One ready for Windows 10.).

    I have somehow missed the essential.  I had to only add the Solution Menu ex and MP Navigator EX 5.0 strangely, I couldn't find the first site of Canon in Thailand and the second in Singapore.

    jamesomorse

  • Integrated with HP Pavilion dv9715nr notebook PC webcam problem

    Hello everyone,

    I hope someone can help point me in the direction of a fix of webcam for the problem that my laptop has developed. I spent the last few days browsing the internet looking for a solution to what seems to be a widespread problem, but with no satisfactory solution.

    The problem:

    A few days ago my integrated webcam works with Youcam and other applications of webcam with the message 'not found webcam' or 'Please turn on integrated webcam. Dutifully, I went to the device manage and felt that there was no imaging device listed.

    Related problems:

    In addition to this problem, I sometimes get an installation of an unknown USB device. This device is, I'm sure that the webcam, but try as I might I cannot point to the drivers of webcam or update its driver to something other than the best driver that is already.

    What I've tried so far:

    -Reinstall the drivers from the HP website. None of the many different types of pilot managed to bring the webcam life or showing in imaging devices.

    -Follow-up guide HP for the problems of webcam that ends up pushing me towards contacting HP help desk. Which, I imagine, will cost you a lot more money than the I have no money.

    -Uninstall all usb devices and reinstall using scan for the hardware changes. This has, once or twice, brought back the web cam and imaging device and worked for a while. However, before I can update its drivers computer freezes and turns itself off.

    -Flashed the bios. No change.

    -Downloaded the drivers from various other cam as suggested in the huge amount of bugs, there are online for this problem. Unfortunately, none of them worked.

    -Recovery plant recovery drive. The webcam is still missing in the imagery of the Device Manager section.

    Technical specifications:

    HP Pavilion dv9715nr notebook PC

    Vista 32 bit premium - service Pack2

    AMD Turion Mobile Technology TL-60 2.00 GHz Dual Processor

    1.94 GB OF RAM

    BIOS F.33, 3.09 M

    Webcam integrated into the lid of the laptop.

    Demand:

    If I understand the large amount of online discussion on what is a common problem and I hope that, among the pages and pages of bugs I looked, I missed a fix somewhere.

    If you have had and solved the problem, or if you have an idea how to sort it out, I'd love to hear from you.

    Edmonds (not Christmas)

    Hello again,

    First of all, let me thank the support forum HP for all their advice and now down to business.

    After a week of problems webcam and extensive research on the internet for a fix for the problem that I finally managed to get my webcam - however, I'm not sure how I did it.

    Below is a step by step guide.

    Now, I know that's not exactly the most empirical of bugs, however, it worked for me. From what I remember last night, the key points seem to be the following. If I insist I was very drunk and I tried almost every difficulty in the two websites above. (The bullet points below are not related)

    • Installation of a very old version of Quickplay.
    • Install the drivers from the DPinstall32.exe.
    • Get a webcam driver update Ricoh are displayed in windows update.
    • Go to Panel configuration/program and using change to the webcam repair and modification.
    • Play with the Services Windows Image acquisition.

    There was, no doubt, many other things I've done and, quite frankly, I am surprised that I did not kill my laptop I did most of them at the same time. However, the webcam is back and running so I recommend drunken stupidity and perseverance as key elements of this fix.

    Finally, somewhere in the two threads I linked will be your fix. There are a lot of different patches so keep and you can do with one of them.

    Good luck. Mines a pint of the black stuff.

    Edmonds (not Christmas)

    Edit - Add the WIA service.

  • Help need drivers for Dell studio one 19 windows 8

    Hello..

    I have a dell studio one 19 touch screen... I have install windows 8 64 bit on it. and all the drivers when they are well.  However I have problems with the set screen Generict PnP monitor and other features like the coprocessor.  I can't use the screen as a touch device as right need driver.

    So can someone knows these drivers?  I enjoyed a lot of help.

    AACM

    Hi AACM.

    Dell has not tested 19 Studio with Windows 8. For more information, refer to link: http://dell.to/U7cW0Q

    You can try to install 'Nvidia MCP, 7A', 'pilot NextWindow Touch Screen' and the Application in compatibility mode (for windows 7) and see if it works. To learn more about compatibility mode, you can refer to link: http://bit.ly/WcIF2t

    Answer please for more details.

  • Dell studio one 64-bit operating system

    I have a Dell Studio one operating system 64-bit and need to know if I can install a 32-bit operating system on his computer without any problem.  I have several programs that can only be used on a 32-bit system. Please tell us if this can be done and what to buy to do.

    http://support.Dell.com/support/downloads/index.aspx

    Check on the Dell site above to ensure that the Vista 32-bit drivers are available for your model computer.

    You must then buy a license and Vista operating system 32-bit full disk and do a clean install of the 32-bit operating system.

    How to do a clean install:

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • I have an older version of Firefox 3.6.6 I think I'm having a problem with one of the websites that I sign. Is it possible to upgrade to the latest version

    I have an older version of Firefox 3.6.6 I think I'm having a problem with one of the websites that I sign. Is it possible to upgrade to the latest version. Without losing all my favorites and the saved passwords?

    Yes, see this article:

    After:

  • Resolution of the webcam problems

    Hi all

    I finally decided me coming here on a resolution of the webcam problem: since Skype updates that followed the 6.2 version, I can't simply a resolution on my bodily proportions. In other words, I think that Skype automatically assigns to a resolution of 1280 x 720, which makes my head like a balloon look hot air (not really convenient for job interviews, I must say). And Skype seem not to care about changes in resolution, as I do in the file "config.xml". Any idea to solve this problem? I really want to be myself again.

    Thank you very much in advance!

    Hi guys, we have made some changes to fix the problem with the BisonCam, NB Pro cameras. Can you please restart your last client Skype for Windows Desktop (6.11) and see if now BisonCam Nb Pro works? Thanks in advance

  • a problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory

    When looking at the module a LabVIEW VI called for TestStand, I get the following message:

    A problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory.  Please reinstall or repair.

    I made the mistake of cleaning C: in my computer.  Clean the C:\National Instruments downloads

    Why would someone put bits of applications or modules, etc. in such a directory?

    I'm not too crazy about restoring 11FR in this folder.  It's just crazy!

    If anyone has encountered this before?  No "easy"? outside re - install TS...

    Side note: I do not touch anything in the \Program files. National Instruments\TestStand\AdapterSupport\LabVIEW

    What version of LabVIEW and TestStand do you use?

    In 2012, TestStand, this directory is mapped to:

    C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 2012\AdapterSupport\LabVIEW

    Have you tried mass compiling the screws in this folder?

    I had to create a new 'TestStand - default values XX.llb"file, where XX is the last version of LabVIEW you use, but I have not seen this message before.

    Good luck

    PH

  • Webcam problems (Windows 8)

    Hey, guys.

    I see several issues came with the internal webcam not working is not after the upgrade to windows 8.

    Here is a Document to help you guys of the incase you encounter this problem.

    Now, there may be several scenarios with webcam problems:

    • Can't find webcam or software of the webcam.
    • Video does not appear in the software of the webcam (Youcam, Skype, Messenger, etc.).
    • Webcam is not listed in Device Manager.
    • Webcam stopped working after Windows update.
    • Installed other programs of webcam and webcam does not work.
    • Image quality problems.

    If none of these steps work, please go to the last section that says "reinstall the original webcam program that came with your computer.

    THX

    I hope it's useful!

    THX

  • Problem "there could be a problem with one or more network adapter on the computer?

    Hi, I just changed my modem, I can't connect to the internet. I can connect to wireless network but not to the internet. When I diagnose, he said, "there could be a problem with one or more network adapter on the computer. I searched the internet but I can't find anything. When I diagnose, I have also seen something on the 'hot spots', but I can't remember it clearly? Any help please?

    Also, when I go to Device Manager network adapters, each of them has WARNING signs except two of them.

    Hello:

    If your laptop is an Atheros AR5007 wireless card, see if installing this driver solves the problem, you have to be able to connect to wireless but no internet network.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

  • Problem with the primary dns server, get the error "There could be a problem with one or more network adapters on this computer."

    Hello

    I was all of a sudden having problems connecting to my wifi at home. When I was diagnosed, he says cannot communicate with primary dns server. I tried all methods in similar positions, but nothing works. I am also unable to connect to internet with my iphone and the itouch. It's really frustrating, because I've already tried all of your suggestions. I just ran another ' diagnose connection problems and it says the following:
    "There could be a problem with one or more network adapters on this computer." Help, please!
    Thank you!

    Thanks for your help, but I have tried this before. In the end I just unplugged my modem and plugged in again and it worked? I feel a bit silly not to try first.

Maybe you are looking for