Webcam USB 2.0 on my laptop with windows vista error device does not work correctly
Original title:
I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.
I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.
Hi Matthew,
The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.
Now, check out these links and return to the State of the question.
When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.
Here are a few common problems with drivers and the means to solve them.
See the following link for more information:
Tips for solving common driver problems
Also check out the following link and run the fixit available.
Hardware devices do not work or are not detected in Windows
The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.
Tags: Windows
Similar Questions
-
I have installed windows vista 32-bit, the bios updated and all the drivers from the official Web site of toshiba, if I put a second screen resolution of my lcd screen to 1024 X 800, but in the external screen does not receive a signal.
If I start the tecra with the connected external escreen account signal in this area, no signal on the lcd screen.Please help me think this laptop is for my boss
Thank youAbel
Post edited by: abelbass
Hello
AFAIK the Tecra M5 came with the graphics card Intel or nVidia.
On laptops with nVidia graphics card, you can set a different option in nVidia Desktop Manager. for example allow several computers to office
You should find it in the control panel.Unfortunately, I put t know exactly where the parameters are placed in the nVidia Manager because this notebook was shipped only with Windows XP but I'm sure that you will find.
Good bye
-
I click on the game icon and the game window and page layouts start charging. But the process of loading stops at halfway and I get the following message: "Mahjong Towers Eternity has encountered a problem. Please make sure that you have the latest version of the game. I have the only version of the game. In addition, once I have delete the message I can't delete the game window unless I'm using the Task Manager.
Hi martham
Thanks for posting in the Microsoft answers site!
It is a standard error message coded in the game that occurs when MTE there is a mistake, for all sorts of reasons. It is a game crash, not a drive failure. You don't need to upgrade to a new version of the game. If you have downloaded a lot of tilesets and backgrounds, clean those out of your game directory. And if you have a large number of layouts in your Favorites list, delete the 'my' file that is located in your game directory
In addition, check the compatibility of the game with Windows 7 from the link below:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Try to install the game in compatibility mode and check if this solves the problem.
See the link below for more details:
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsFor more assistance, please visit our Bigfishgames forum:
http://forums.bigfishgames.com/games/list.page
I hope this helps!
Kind regards
Gokul - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think. -
HP laptop running windows vista family premium does not recognize my HTC Fuze smartphone when I connect it wil a usb connection. I don't quite know what I changed. It allows to work so that I could sync to pc for outlook, etc. Also when I go to the link on the computer to display the drives and devices it does not show the connection. I use window mobile device centery. It says not connected. Thanks for your help.
When I connect the HTC Fuze phone to the computer, it comes up with a window of synchronization and the phone starts to load.
Sync Center says not connected and nothing is happening on the computer.
When I bring mobile glass Center thing it doesn't say not connected to the smartphone.
I don't see the phone of the link computer to which is connected to the hp laptop.
the USB port works with my printer.
What should I try next? Thanks for your help.
Hi Bill,
You can try the following steps and check:
Method 1:
Connect the HTC Fuze to the computer, and then run the fixit and see if that makes a difference.
Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.
Method 2:
If method 1 may not then try the following:
If you are running Windows Vista 32 - bit, then Uninstall and reinstall the same.
Microsoft Windows Mobile Device Center 6.1 for Windows Vista (32-bit)
http://www.Microsoft.com/en-in/Download/details.aspx?ID=14
If the problem persists, please contact HTC.
Please post with the State of the question.
-
It is an old Dell Optiplex 150 with professional nt Windows 2000 software. I have a database of collection of stamp on it, but after having changed my password several months ago, this password does not work. Suggestions on how I can get in? ttremmel
Hello
Thanks for posting your query in Microsoft Community.
From your problem description, I understand that the newly changed password does not work.I ask of post you your query on this link
http://social.technet.Microsoft.com/forums/en-us/categories
For any Windows help in the future, feel free to contact us and we will be happy to help you.
-
discs made with WIndows XP, but none does not work with Windows Vista
I have many discs made with windows XP and now none will work with windows VISTA, does anyone have an idea, I tried for weeks now, alll over the internet, but nothing, can someone help, because I need these files on CD RE-WRITER and RE-ENGRAVER of DVD discs.
Hello
· You get the error message?
Follow these methods and check if that helps:
Method 1:
I suggest you run the Microsoft Fixit tool from this link and if it helps.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems
Method 2:
Follow the steps in troubleshooting this article and check if that helps:
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
-
Anytime Upgrade Windows vista product key does not work with my upgrade CD
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: WINDOWS ANYTIME UPGRADE VISTA CD I GOT WITH MY LAPTOP when BUYING IN 2006, I TRY to LEVEL MY LAPTOP, AND WHEN we you REQUEST THE PRODUCT KEY I ENTERED. BUT WHAT I GOT IS 20 CHARACTERS LONG AND THE REQUIREMENT IS 25.
WHAT SHOULD I DO?
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
The Anytime Upgrade DVD of Windows Vista is designed to only upgrade edition of Windows Vista to an edition superior level of Windows Vista. However, the Windows Anytime Upgrade (product keys) licenses are no longer available for Windows Vista. If you're running Windows Vista and want to upgrade your PC, go online to upgrade to Windows 7. Carey Frisch
-
Selecting with the range of colors does not work correctly
Well, at least for me it does not correctly. If I have items on separate levels, and I use the color range option to select the area, it works at all levels, not just the level I selected. This isn't what I want! I want only to choose the range of color at a level. The work-around needs to manually turn the other levels, but on a file with a lot of levels, which can be tedious. Can this be avoided? Either way, magic wand works only on the selected level, but not color range (or the range of colors, if you're American).
The work-around needs to manually turn the other levels, but on a file with a lot of levels, which can be tedious.
Hide all other layers can be done by alt-click on the visibility icon in the layers panel.
-
I'm trying to attach two usb headsets to a computer compaq laptop with windows vista. A set of works of helmet very well but the other does not until one is removed.
Hi dmilten,
In Windows Vista, you can get her out only 'default' and a 'default' endpoint. Applications can play at all (and output record of any entry), but by default, they will use only 'by default' entry and exit.
Outputs audio multiples are not supported by Windows Vista. It's normal. However, you can contact the manufacturer of the equipment for other possibilities.
He may want to know:
You can configure your Media Player to play a default device
In Windows Vista, you can configure Windows Media Player to play an audio device specific. Tools | Options | Devices | Speakers | Properties | Select the audio device you want to play.
Reference:
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
How to do a system restore with windows 8. my mouse is not working but the keyboard works
How to do a system restore with windows 8. my mouse does not work but the keyboard works.
I've updated some drivers and now my mouse does not work
Press the Windows key and press 'R '. Type "appwiz.cpl" without the quotes in the box run. Use the arrow keys to scroll down for updated drivers. When the driver is highlighted Press 'enter '. Use the arrow keys to select Yes in the uninstall confirmation dialog box. Restart the computer.
You can run the restoration of the system from a command prompt if you are unable to uninstall the drivers. Press the Windows key and 'X', use the arrow keys to select the type of command (Admin) line "rstrui.exe" without the quotes. Use the arrow keys to navigate the windows system restore.
Jim
-
the touchpad on my toshiba laptop with windows vista is disable, and I don't know who to make it work again.
Hello
Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
So usually loaded at the top of the screen.There is also usually a TouchPad control utility that loads in the Notification area next to the clock
at the bottom right.Toshiba support - click Communcate for links to the Forums and Contact Toshiba.
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jspToshiba downloads - access your model.
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba forums - good source of info from others who have the same system or similar
http://laptopforums.Toshiba.com/Check with the manufacturer of system support, documentation in line, or forums as there probably
are shortcut keys that enable and disable the touchpad functions.Also check the control - Mouse - touchpad settings panel.
You can also try this:
Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
(drivers), now right CLICK on the touchpad and UNINSTALL.Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
RESETThis will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
of work.Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
device if present.
http://support.Microsoft.com/kb/310575Then go to the website of the manufacturer of system (Toshiba downloads - access your model - listed above)
and get the latest touchpad drivers.Download - SAVE - go to where you put it-click on - RUN AS ADMIN.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
I have an acerDiagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: invalid license
Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - XY9X3 - JDXYP-6CJ97
The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
Windows product ID: 89583-OEM-7332157-00211
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6002.2.00010300.2.0.003
ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Vista (TM) Home Premium
Architecture: 0 x 00000009
Build lab: 6002.vistasp2_gdr.110617 - 0336
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{F20B4B72-1308-45BE-8F90-95E91A3F0AAF} 1.9.0027.0 6.0.6002.2.00010300.2.0.003 x 64 *-*-*-*-6CJ97 89583-OEM-7332157-00211 2 S-1-5-21-923204104-223683984-168055983 Acer Extensa 5630 Phoenix Technologies LTD. V1.30 20090319000000.000000 + 00070333507018400FA 0409 0409 US Mountain Standard Time(GMT-07:00) 0 3 ACRSYS ACRPRDCT 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.0.6002.18005
Name: Windows Vista, HomePremium edition
Description: operating system Windows - Vista, channel OEM_SLP
Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
Installation ID: 004511331255365043724851364501374781338933223323713385
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
Partial product key: 6CJ97
License status: Notification
Notification reason: 0xC004F063.Windows Activation Technologies-->
N/A--> HWID data
Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ isActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP INTEL CRESTLNE
HPET INTEL CRESTLNE
START PTLTD $SBFTBL$
MCFG INTEL CRESTLNE
SLIC ACRSYS ACRPRDCT
ASF! OEMID OEMTBL
SSDT BrtRef DD01BRT
SSDT BrtRef DD01BRTAh! -in this case, it is not necessary.
I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033
Open the Windows Update - click the link view updates installed on the left of the page
in the list, find the WAT update KB971033, and then uninstall it.
Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033
redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?
-
Greetings Workshop does not work on my laptop with Windows Vista
Greetings Workshop does not work on my computer acer laptop with windows vista. says that it cannot read a part of the program. How can I make it work?
* original title - wishes workshop does not work on my laptop with windows vistaIdeas: insert an error code or give a brief description of what you are trying to accomplish or fix.__*
Greetings Workshop does not work on my computer acer laptop with windows vista. says that it cannot read a part of the program. How can I make it work?
1st thing is to see if it is compatible with vista
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/
If it's trying to do a right-click on the setup.exe then run as administrator
If this is not vista compatible read below
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
Walter, the time zone traveller
-
my mouse on my laptop does not work correctly...
the "clicker" on the laptop to put it technically, but not the touchpad. You must hold it down for a while and press really hard to make it work, I don't know if it's something that I can fix it or to replace. any suggestions to fix this would be appreciated!
the "clicker" on the laptop to put it technically, but not the touchpad. You must hold it down for a while and press really hard to make it work, I don't know if it's something that I can fix it or to replace. any suggestions to fix this would be appreciated!
Hello
It looks like a hardware problem if the button does not work correctly. Until you can find a solution, you can use an external USB mouse.
I recommend you contact the manufacturer of the computer for that matter.
Concerning
-
After hybernation, all usb and wifi mobile devices does not work
Original title: Hybernation question
After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.Hi Mirza.Shanawazbaig,
1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?
2. do you have security software installed on the computer?
3. did you of recent changes on the computer?
4 when was the last time it was working fine?
Method 1
See the below Microsoft article and try the steps mentioned, check if it helps.
Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation
http://support.Microsoft.com/kb/871233
Method 2
I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.
How to manage devices in Windows XP
Maybe you are looking for
-
I know it's only speced up as 12GBs but is anyway I can put a 16? Tried the other day and of course, it does not, however, I could, but 32 in my macbook and it was only speced for 16. So there are hacks that I can do to get the Board of Directors to
-
Admin Username and domain are gone
I tried to add an addiotnal username to my computer a few days ago and now I've lost my user admin account I try to connect to windows, and it's a whole new account. I can't make any changes because I'm not in the administrative account. Of course, I
-
System does not boot into Windows when a USB is installed
It's strange. I just installed Windows 7 Home Premium Upgrade (64-bit) of a previous Vista machine. Has made the choice of 'Upgrade '. Now that it is finally installed and get some of the bugs resolved, a question I still have is when a (key, post
-
Autonomy of the Q10 blackBerry
I bought the Q10 mobile over the last 7 days ago. After full charge in 4 hours (without help), he has reduced by 30%. So, what's the problem?
-
With computer recovery problem-
So recently my father made the recovery on the computer and the screen does not go back to the window, the wallpaper was black and had this visa window in the lower left corner but after that we waited for the button activated to disappear, we notice