WebLogic 10.3.6 gives error after a few hours

Similar Questions

• 360 13 inches x spectrum: spectrum x 360 8.1 Windows stops to get into sleep after a few hours

  My x 360 spectrum stops to get into sleep after a few hours of normal behavior.  In other words, when the computer is started first, he put on standby and Hibernate mode then normally after the specified idle period.  It can then be woken up and work normally and then to go back to sleep after inactivity - during a few hours.  It stops working after the computer has been for a few hours.  I don't know exactly how much time must be in place before this problem starts, but once it ceases to be able to sleep, the only way to solve the problem is to reboot the system.  Once the problem occurs, the computer turns off the screen but that's it.  He will sleep if I do it manually by pressing the button of power or a click on the Windows button and forcing them to sleep or hibernation.

  I watched powercfg /requests and there is nothing listed that could prevent sleep.  I ran also report with fluo compact powercfg and it also does not list something that prevents apparent sleep.

  NOTE: The energy report is also EVEN if the system still works correctly.

  I could use help to determine what is the cause of this condition.

  Thank you.  See below for diagnostic information:

  Here is the result of the /requests powercfg command:

  C:\Windows\System32>Powercfg /requests
  DISPLAY:
  None.
  
  SYSTEM:
  None.
  
  AWAYMODE:
  None.
  
  PERFORMANCE:
  None.
  
  PERFBOOST:
  None.

  Here is a release of energy report (Note: site Forum HP changed the HTML code):

  Power efficiency Diagnostics report
  X 360 computer name
  Analysis time 2016-01 - 06 T 15: 16:32Z
  Scan duration 60 seconds
  System manufacturer Hewlett-Packard
  Product system name HP spectrum x 360 Convertible 13
  Date of the BIOS 10/23/2015
  Version of the BIOS F.2D
  Build OS 9600
  PlatformRoleMobile platform
  Plugged In true
  Number of processes 164
  Contexture 1892
  Report GUID {f8670991-ccc2-4c9e-b743-81cb15d13b03}
  Results of the analysis

  Errors

  Suspension device: USB get USB selective suspend
  This device is not in the State of selective suspension of USB. Processor power management can be prevented when the USB device is not in the State of selective suspension. Note that this problem will not prevent the sleep system.
  Name of device Microsoft mouse and driver detection keyboard (USB)
  Host controller ID PCI VEN_8086 & DEV_9CB1
  Host controller location PCI bus 0, device 20, function 0
  Device ID USB\VID_045E & PID_0745
  1 port way

  CPU utilizationrocessor use is high
  The average CPU utilization during the trace was high. The system consumes less power when the CPU usage average is very low. Examine the use of the processor for the individual processes determine the applications and services that contribute the most to the total CPU usage.
  Average use (%)     11.12
  Platform power management capabilitiesCI Active Express - State Power Management (ASPM) disabled
  PCI Express Active State Power Management (ASPM) has been disabled due to incompatibility with the hardware on this computer.

  Device drivers:
  Devices with missing or misconfigured drivers can increase energy consumption.
  Card device name Cisco Systems VPN for Windows 64-bit
  Device ID ROOT\NET\0000
  State of the device 0 x 1802401
  Code 0 x 16 device problem

  Caveats

  Platform timer resolutionlatform Timer resolution
  Default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the resolution of the timer is increased, processor power management technology may not be effective. The resolution of the timer can be increased due to media playback or graphic animations.
  Current resolution of the clock (100ns units) 10007
  Maximum Timer (100ns units) 156250
  Platform timer resolutionutstanding Timer request
  A program or service has requested a resolution of timer is smaller than the maximum platform timer resolution.
  Requested period 10000
  Asking to process ID 11968
  Applicant process path \Device\HarddiskVolume4\Program files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 8464
  Average use (%)     1.09
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.59
  0.48
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 1360
  Average use (%)     1.09
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0,58
  0.47
  \SystemRoot\system32\ntoskrnl.exe 0.01
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 9788
  Average use (%)     1.08
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.59
  0.47
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name HPSF.exe
  PID 11968
  Average use (%)     0.71
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \SystemRoot\System32\win32k.sys 0.10
  \Device\HarddiskVolume4\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll 0.10
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name netsession_win.exe
  PID 5828
  Average use (%)     0.67
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.42
  \SystemRoot\system32\drivers\ndis.sys 0.10
  \Device\HarddiskVolume4\Users\Zeldar\AppData\Local\Akamai\netsession_win.exe 0.04
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 5712
  Average use (%)     0.63
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome.dll 0.35
  \Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll 0.11
  \SystemRoot\system32\ntoskrnl.exe 0.08
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Name of process system
  PID 4
  Average use (%)     0.55
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.42
  \SystemRoot\system32\drivers\ndis.sys 0.05
  \SystemRoot\system32\DRIVERS\dne64x.sys 0.02
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Name of process explorer.exe
  PID 3988
  Average use (%)     0.43
  Module Module average use (%)
  \SystemRoot\System32\win32k.sys 0.15
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \Device\HarddiskVolume4\Windows\System32\ntdll.dll 0.02
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 7920
  Average use (%)     0.39
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0.22
  0.14
  \SystemRoot\system32\ntoskrnl.exe 0.00
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name WWAHost.exe
  4604 PID
  Average use (%)     0.28
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0.10
  \SystemRoot\SysWOW64\ntdll.dll 0.03
  \Windows\SysWOW64\jscript9.dll 0.03
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name UoipService.exe
  PID 2544
  Average use (%)     0.25
  Module Module average use (%)
  \SystemRoot\system32\ntoskrnl.exe 0,14
  \SystemRoot\system32\drivers\afd.sys 0.02
  \Device\HarddiskVolume4\Windows\System32\mswsock.dll 0.01
  Process CPU Utilization: individual with significant CPU usage.
  This process is responsible for a significant part of the total CPU utilization recorded during the trace.
  Process name chrome.exe
  PID 6600
  Average use (%)     0.24
  Module Module average use (%)
  \Device\HarddiskVolume4\Program files (x86)\Google\Chrome\Application\47.0.2526.106\chrome_child.dll 0,18
  0.04
  \Device\HarddiskVolume4\Windows\SysWOW64\ntdll.dll 0.00

  Information

  Platform, resolution: timer Timer application stack
  The battery of the modules loaded for the platform timer low in this process.
  Requested period 10000
  Asking to process ID 11968
  Applicant process path \Device\HarddiskVolume4\Program files (x 86) \Hewlett-Packard\HP Support Framework\HPSF.exe
  Call stack \Device\HarddiskVolume4\Windows\System32\ntdll.dll module
  \Device\HarddiskVolume4\Windows\System32\kernel32.dll
  \Device\HarddiskVolume4\Windows\Microsoft.NET\Framework64\v4.0.30319\WPF\wpfgfx_v0400.dll
  \Device\HarddiskVolume4\Windows\System32\kernel32.dll
  \Device\HarddiskVolume4\Windows\System32\ntdll.dll
  Political power: Active Power Plan
  The current power in use plan
  Plan custom name
  Map of GUID {e427f965-afc6-4f07-b387-e9be116f159e}
  Power politicsower Plan personality (on battery)
  The personality of the current power plan when the system is on battery power.
  Personality power saver
  Political power: video quality (on battery)
  Windows Media Player allows to optimize the quality or energy savings during video playback.
  Mode of quality balancing video quality and energy savings
  Power politicsower Plan personality (Plugged In)
  The personality of the current power plan when the system is connected.
  Personality power saver
  Political power of political power Radio: 802.11 is a maximum Performance (Plugged In)
  The current policy of power for compatible 802.11 wireless network adapters is not configured to use reduced consumption patterns.
  Political power: video quality (connected)
  Windows Media Player allows to optimize the quality or energy savings during video playback.
  Quality optimization for video quality mode
  Success of queries: analysis of system availability
  The analysis was successful. No problem of energy efficiency have been found. No information has been returned.
  Battery information: battery
  Battery ID Hewlett-PackardPrimary
  Manufacturer Hewlett-Packard
  Serial number
  Chemistry LION
  Long term 1
  0 seal
  Nominal capacity 54720
  Last full 54720
  Platform power management capabilitieslooking at the States of sleep
  Sleep States allow the computer to access the modes low power after a period of inactivity. The waking state S3 is the State of default Eve for Windows platforms. The waking state S3 consumes only enough power to preserve the contents of the memory and allow the computer to return to work quickly. Very few platforms are supported States S1 or S2 sleep.
  False S1 sleep taken in charge
  False S2 taken sleep support
  True S3 Sleep taken in charge
  True S4 sleep taken in charge
  Platform power management capabilities: connected standby support
  Connected standby allows the computer enter a low power mode in which it is always on and connected. If supported, connected standby is used instead of the system sleep States.
  Connected supported watch fake
  Platform power management capabilities: Adaptive brightness is supported.
  This computer allows Windows to automatically control the brightness of the built-in display.
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 0
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 1
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 2
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Control of performance Type ACPI Performance (P) / (T) States of butterfly
  Platform power management capabilitiesrocessor power management capabilities
  Effective processor power management allows the computer to automatically balance the performance and power consumption.
  Group 0
  Index 3
  Idle state head 3
  Idle Type idle ACPI (C) States State
  Nominal frequency (MHz) 2401
  Percentage of maximum Performance 100
  Percentage the lowest performance 20
  More low percentage of gas 2
  Controls of Type ACPI Performance (P) performance / Throttle (T)

  I found a thread on Microsoft answers community web site.  Unfortunately, it seems that Microsoft has not fixed even though this thread is over a year.  This has been driving me crazy.  In any case, the problem is with Windows 8.1 and is caused by the use of a Microsoft account to connect to the computer.  If the account is not connected, after a few hours the computer stops to fall asleep.  If you close the MS account, then the computer will sleep normally.  My dose is to convert my connection from the local computer to a local account and disconnect from Microsoft.  This process is easy to do, go into the settings of PC and disconnect the account.  It will keep your original profile.

  Here is the link to the thread that got clued in the solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-refuses-to-sleep-automatically-idle/6ab4aaaf-31bd-4baf-ABC6-62ba8c8260aa?DB=5&page=2&rtAction=1452178632575

  I consider this resolved issue that HP is concerned.  Microsoft needs to address the issue.  I'm not interested in switching to Windows 10 for compatibility reasons and, in this regard, the same problem can exist in the W10.

• E2000 HTTP Port Fowarding stops after a few hours

  Port forwarding Port 80 stops working after a few hours and requires the router to be restarted to begin to transmit again. The firmeware is the last 1.0.04)is Build 7. I need to work reliably for several days without intervention.

  I guess it is a problem of port forwarding because I can access the IP address on my network within my network even when I can't access it from outside my network. I use the appropriate IP addresses because it sometimes works OK. A peculiarity is that, when I can't access the page, it loads as totally blank white without error message.

  I suggest restore you the router (30 sec), wait for solid power light and then reconfigure the settings.

• Vista crashes after using it for a few minutes and then does not start (after a few hours - it starts and again the same problem)

  I'll have this weird problem and did not find the problem. Suddenly my laptop (Lenovo Y710 - 4 GB RAM - Windows Vista Home Premium 32 bit) crashes after a few minutes of activity, Vista freezes. CTRL + Alt + Delete does not work. If I force close to the bottom and then try to restart, it do display anything. I tried to start in safe mode, but after pressing f8 and it only beeps and still doest appear anyting on screen you. If I try to start the laptop after a few hours it starts again and minutes it freezes again. I noticed this problem for the first time when using RDP to my desktop, but it wasn't the first time I've done RDP. I have not installed new hardware or drivers. Am not able to nail the question, would appreciate any help.

  Thank you.

  This is no doubt hardware failure. The laptop could be overheating and/or other components could be involved. Contact Lenovo technical support or take to a competent local computer Tech do not use a type of BigComputerStore/GeekSquad of the place.

  If you have a pretty good level of computer skills, you can test some components yourself although it is more difficult to make accurate material on a laptop computer troubleshooting.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  MS - MVP - Elephant Boy computers - don't panic!

• Printer Hp 6520 automatically shuts down after a few hours

  Original title - printer hp 6520 problem

  My new photosmart 6520 automatically shuts down after a few hours, it disconnects from my Win7 machine without using the material removal tool, if I get a nice loud bang when it does.  It is connected through the usb port on my Pavilion.  I don't mind to go to sleep, but I don't want to disconnect completely, because when I send a new print job, he didn't wake up automatically and print, I don't have to feed it manually upwards then it prints very well.  Any ideas on how to solve this problem would be greatly appreciated.  Thanks in advance.

  I could join HP support on this issue this morning.  There were two things - first HP printers now have a built-in surge protector so you should not connect it to an another surge protector.  Second, the default printer is delivered with activated automatic stop, turning off will do sleep, but not to turn it off, so that it accepts print jobs whenever one is sent.  So, if that helps anyone, good!  And thanks also for your help.  :^) gene

• WhatsApp 2.12.14 version crashes on iOS 9.2.1.  I reinstalled whatsapp 3 times and after a few hours, it crashes when opening

  MY whatsapp was working fine before 29 February. There was an update for whatsapp in date, after which my whatsapp continues to break down in 2 seconds after I open it on the latest iOS. I reinstalled with the back three times. It stops working again in a few hours to reinstall. Search Google says it might be iCloud or Facebook integration. Help, please.

  Same thing for me. It's extremely annoying! The only way to keep it from constantly crashing is constantly in contact with the screen with a finger...

• HP Deskjet Ink Advantage 6525: Printer loses the wireless connection after a few hours

  Hi all!

  Printer is connected and I see on the IP address screen. Desktop with Win7 and Ubuntu are used. After passing on the printer is working properly, but a few hours more later his inaccessible from the two systems. Printer indicates connection, I can see it in the router's web access tool, but it is inaccessible. I have to power off the printer, restart the router, then power on the printer - and it works. Not very comfortable.

  Someone knows how to fix this bug?

  Hi varspb and SteveB21.

  Thank you very much for your answers!

  Please take a moment to watch this video:

• WRT54G gives up after a few minutes.

  After resetting the router, or pulling on the power cord, the router works well up to a few minutes in, usually around 10. Internet speed falls to about a half a MB to 5 MB. The ping triggers from 58 to 999. When I reset the router it works fine again for a few minutes only.

  This is version 6.

  We are running xp on 3 computers, 2 of them are wireless.

  Thank you!

  Yes, another network wireless interference would affect your connectivity to a certain extent. As you face the question on both the connections (cable and wireless) that should not be the cause. Try changing the MTU size on the router, if this can help, otherwise your router is wrong and needs to be replaced.

  Change the MTU.

  Access configuration page - http://192.168.1.1

  Leave a change of username and password - admin, MTU - manual and size MTU - 1364.

• I get activation errors after a few changes of material/reformatting. How can I fix it?

  In the process of diagnosis of hardware problems, I passed a bunch of components different and reformatted in addition to once, and now I get an error message saying that I'm "installed on too many machines -" even if I use only a copy. Because I installed it on 'computer' previously no longer exists, I have no way to disable installed previous. How can I solve this problem?

  support to contact adobe to reset your activation number: www.adobe.com/support/chat/ivrchat.html

• Get the guest OS unusable slow after a few hours / after restoring a snapshot

  Running an early 2009 Mac Pro with 10 GB of RAM, 2.66 Quad-Core Intel Xeon CPU, OS X 10.10.2. 7.1.1 the merger.

  I have a question where a guest OS I am running under Fusion will get inevitably unusably slow after that it worked for a while. Usually what happens is when I start the system, everything works well, and then after an hour or two, it will start running very slowly. Very basic operations like moving a window all about take a few seconds to complete, and I can see the screen slowly updated the window moves. Another example is by clicking on a menu in the menu bar might take several seconds for the menu even start drawing, and then a few seconds more for what it ends and during this time where the BONE is otherwise unresponsive. Essentially, the interaction of basic with the operating system is very difficult. If I stop the operating system and then start it back up again, it will resume performing normally for another hour or two.

  If I record a snapshot of a system and restore later, usually (but not always) will trigger to poor performance and I have to completely farm the guest operating system and start again it upward to fix.

  This happens regardless of which is the guest operating system. I did experience in OS X 10.6 - 10.9, Windows XP and Windows 7 32 - bit and 64 - bit.

  So far, I tried affecting versions material of these VMs to 10, as was recommended in other threads I've found to fix this exact problem. However, it is not fix things for me.

  Does anyone have an idea, what the problem? I'm quite like merger so far, more Parallels, but with this question, it is very difficult for me to get work done. I hope it can be resolved.

  Thanks in advance!

  I had the same problem since V7 came out.   At one point, from 1 hour to 7 days, all my virtual machines would slow to a crawl.   The only solution was to close all, vmware close and restart.   I spent months to fine-tune different settings.

  I did a few manual tweaks after searching on the net and see some common parameters which have been recommended.   After 4 to 6 weeks, my problem has not reappeared.   I don't know which of these parameters has solved my problem, but you can give them a try.   I don't have an SSD if you may or may not want to use the virtualSSD parameter according to your configuration.

  The settings that I have added are:

  mainMem.backing = 'swap '.

  scsi0:0.virtualSSD = 1

  MemTrimRate = '0 '.

  sched.mem.pshare.Enable = "FALSE".

  MemAllowAutoScaleDown = "FALSE".

  As usual, save your vm and use at your own risk.  They have worked very well for me so far, but each installation is different.

• Tecra T9100 turns off after a few hours!

  Hi, I was wondering if anyone know why my Toshiba T9100 turns off? It is turned on and after about 3-4 hours, it is still, just turns off, the battery is full?

  I have two of them, and they both make the same thing!

  Thanks :)

  Hello

  Maybe overheating. Try to check the ventilation openings and clean the unit.

• After a few hours windows 7 stops. WHEB that I reboot, I get a message windows closed ubepectley normal startup

  Windows 7 stops for no apparent reason. When I restart it tells me that windows has stopped unexpectley how stars upward the choice I use is normally start.

  You are getting error messages during the shutdown occurs? Have you considered or examined the possibility of overheating problems?

• Debug.log file to C:\ completely evacuate my memory after a few hours.

  Hi everyone, this is my first post here and I couldn't make another post here for a while, please excuse me if I don't correct format. I had this problem with my laptop Lenovo Windows 7 (build 7601) where everytime I turn on my laptop, this file called debug.log which lies in my local disk drive is created. It starts as nothing, only a few hundred bytes, but almost every minute, it will trigger 100 bytes (that's when nothing really works then). When I start playing games, online, etc., it will start to get very disturbing. The debug.log when I look at the 6 hours from now will probably be about 20 GB +. I discovered just recently on this file because I need to keep my laptop on all night for my friends to play on a Minecraft Server I have running and I was constantly find the disc completely full. After a day or two, the debug.log will eventually be around 300 GB to 500 GB and I have 0 bytes remaining on my drive. The laptop reset will delete the debug.log until I log in again and it will start to regain memory. I looked this up online nothing helps. For anyone reading this, please try to help me identify what this thing and if I could turn it off / limit its size. Before I forget, here's what is in the file from the announcement: http://pastebin.com/KuBgBwL1 . I have no idea what this thing of Toolbox, the only other thing I saw with the word toolkit was in my list of services and called him "ToolkitSvc" (it is running). Please help me, it is empty my memory constantly and I don't want to restart my laptop everyday!

  Hello

  Try the steps from the following link:

  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=kmc757u4Zlo
  http://support.Microsoft.com/mats/slow_windows_performance/en-us

• Programs Adobe CC freeze after a few hours of idling

  Hi guys,.

  quite often, I started a work made all night. The work is rendered, but the morning all cc of adobe programs that have been opened has stopped working. All except Photoshop.They are simply frozen.

  I'm working on a Win8 machine with the latest version of installed CC.

  Anyone here with the same problem? Or does anyone know how to fix this?

  I have no experience on the same, but my personal adviser would not not to keep the system running during the night.

  A reboot does magic for the stability of your system. It might be a good idea, instead of trying to solve the problem,

  to avoid this problem to occur.

  To avoid the question, do a 'stop to schedule a task' to leave the application running and make

  When you leave should not be a problem, when you perform a calculation of how long it will take, you can plan your "Shut-Down".

  Order after this date. For example, make it will take until midnight, plan stop one hour after this command.

  To schedule a task:

  1 click Start > Control Panel > system and security > administrative tools and then click Task Scheduler.

  2 in the Action menu in Task Scheduler, click on "create basic task...". »

  3 in the windows "Create basic Task Wizard" that appears, type a title and a description. Something basic like "Shutdown of the PC."

  4. click on "next".

  5. on the "Trigger of the task" screen, choose how often you want the PC Shutdown to work. Button to stop every night, click on 'daily' and click Next.

  6. on the "Daily" screen, enter the date and time you want your PC to shutdown. Click "next".

  7. in the 'Action' screen, choose "Start a program" and click "next".

  8. in the "Start a program" screen, type C:\Windows\System32\shutdown.exe in the field ' program/script ".

  9. in the field add text arguments, type/s.

  10. click on "next".

  11. check your settings in the summary screen and click on "Finish".

  Hope this helps

• After a FEW hours of nail-biting, I had work ISCSI, but...

  I've set up ISCSI with the main purpose to be able to easily share files between windows and esxi, but I got it working (using a cheap iomega storcenter NAS), but now, how can I see the folders of windows iscsi?

  NFS is proibably you need.  Configure the services for unix on your Windows Server, create a share and add to that of ESX.  Then, you have a folder in the Windows box that both can see.

  HTH

  http://blog.peacon.co.UK

  Please give points for any helpful answer.