Website shows point with no way of billing for the order
I found a watch I want to buy but 7 hours on this computer, that I found it twice but no w ay listed to order this item. The site is <Newlookwatches.com> the day item model number of men's watch of the citizen 'BH1552 - 54 T. Many places have a black face - "BH1552 - 54G" but I find it previous dial said champagne face.
Amazon said that they do not know when he will be back in stock. Maybe he was interrupted.
But this isn't a problem, we can help here on the Mozilla support forum; I think that there is no personal shoppers among us. Questions about Firefox?
Tags: Firefox
Similar Questions
-
The OSM language, how to cancel and suspend execution by the billing for the order.
I have 2 simple questions:
1. can I change the language of the OSM in Spanish? I've seen instructions on guide/location OSM developer but I can´t do.
2. I know that I can suspend and cancel an order whit the help of 'OrderManagementWS.wsdl' or with the Web Client. But how can I suspend that part of the order of the order, for example in a single order can came with elements of different order which will create the various tasks depending on the granularity, but the spouse that I need to suspend only the execution of a product that is entered into the order, how can I do this? Or I just can´t?
Thank´s for your help.
Lucas.Lucas;
Thanks for the additional information. I have read the document, it helped me to understand your scenario.
You still wonder if what is the business scenario which triggers the need to suspend a specific agenda item.
The challenge in doing that is that an element of order may appear in a part of the order as well as many other items of the order. This is why the Act to suspend any treatment about to an order can affect makes many other items order up to and including the entire order.
-
Easy way to qualify for the requirement of 'Service' B4BB
It seems to me that the best way to qualify for the service requirement, should just link to your application in AppWorld. For example, ask the user to review your app, or maybe a link for them show all your existing applications.
It uses the framework of the call which is a qualified service for the B4BB program.
The code is as simple as:
var request: InvokeRequest = new InvokeRequest();
Request.Target = "sys.appworld";
Request.action = InvokeAction.OPEN;
Request.Uri = "appworld://content/" + appId;
InvokeManager.invokeManager.invoke (request);I think you could even make an argument, a getURL() call simply the same thing, so what is not also meeting of eligibility for B4BB?
Download
navigateToURL (new URLRequest ("appworld://content/" + appId));
You can have lots of fun with other prefixes too:
https://developer.BlackBerry.com/air/documentation/BB10/blackberry_world.html
You haven't added anything to your XML files to call a target. These tags are only if you want to be a target. Use the sample code that I posted to call BBM, and it will work fine.
-
I bought Adobe Elements with my camera. Can I switch to Lightroom with some type of credit for the purchase, I already have?
I don't think that there is any such path upgrade to Lightroom. Lightroom can work with Photoshop Elements or Photoshop as a complementary product to improve and provide features that are not possible in Lightroom itself. For example, with Lightroom, it is extremely difficult if not impossible to remove unwanted objects from an image. Or, there may be sometimes a few necessary dusting that Lightroom cannot do just effectively on its own. If Lightroom offers an easy way to move from Photoshop or Photoshop Elements image in order to more easily accomplish some of these specialized tasks.
-
I have a problem with a card being inadmissible for the zoom on a phone.
I have a problem with a card being inadmissible for the zoom on a phone. The Web site has been formatted for the phone using Muse. The plan should be saved in a way in Photoshop or y at - it a setting in the Muse who can fix this?
Please provide more details, as if the card is integrated an image or a real map generated by widget.
The generated plan must zoom in/out.
Thank you
Sanjit
-
All of the fonts that come with Dreamweaver CS6 are licensed for the use of the web?
All of the fonts that come with Dreamweaver CS6 are licensed for the use of the web?
I also have Creative Suite 5, which I think is delivered with a set of Adobe Fonts. These are all licensed?
A license? Yes, but not necessarily for the web. Some licenses permit use on paper or images but not the web.
For legal reasons don't assume that you can use any font you want on the web. Fonts are protected by the intellectual property laws in the same way that software is protected against illegal copy, modify or distribute. In other words, an owner of fonts can of course, saying "you can use my font, but you cannot change it, you can not reproduce and you may not distribute." On the web, which is a deal breaker, because you must be able to do all three.
These font families are common to most Windows/Mac systems.
Adobe Edge and TypeKit Web fonts are licensed for use on the web.
Nancy O.
-
How I find myself with two passwords to iCloud for the same account?
How I find myself with two passwords to iCloud for the same account?
For security reasons, I only use iCloud for Contacts and "find my iPhone".
Several months ago Apple forced me to change my password to iCloud. So I did this. In the last months, I used successfully the new password to 10 or 12 times when asked without problem.
However, I received a notification of a software update for my Apple Watch. I did the update without problem. However, after completing the update my iPhone asked me to connect to my iCloud account. When I did this, she rejected my password. I made 4 attempts typing very slowly and with care for you sure I did it right.
Then, operating under a hunch, I decided to enter my old password to iCloud. It worked? I'm confused about this, any ideas would be appreciated.
I had a similar problem last year. I had to call Apple. Contact is a bottom of this page.
-
Hi, my c drive shows low disk space, so I searched for the program that holds more memory on the c drive. I came to know that pagefile.sys has 3 GB in the c drive, kindly guide me to move the pagefile.sys to another drive.
Hi jafrin.michel,
Thanks for posting in the Microsoft community.
Before you start the troubleshooting steps, I need the information required.
What version of the windows operating system do you use?
Method 1:
If you are using windows 7, I suggest to perform a disk cleanup and verify.
Delete files using disk cleanup
http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
Method 2:
If you want to move the pagefile.sys to another drive, follow the steps and check out them.
Follow these steps to move the pagefile.sys to C: drive on D: drive (if you have the drive D :).
1, write click on my computer and select Properties.
2, click on the Advanced tab.
3, click settings under performance menu.
4, click on the Advanced tab and click on change.
5, select letter (C :) and "BOLD" No pagefile then click on Set. )
6, if you want to configure pagefile.sys in, select drive D: drive letter D: and "BOLD" in the custom size or the size of the system managed , then click on Set. It displays a pop-up message click OK.
7, again click apply and OK OK.
8, the system you will be asked to reboot, click on Yes.
9, after rebooting the system, you can see the pagefile.sys will be moved to D:
-
Is there a fault with upgrade 2.13.121 for the interface Adobe Creative Cloud? I want to check the updates of the program and update freezes at 5% - I have now tried 6 to 8 times to + 5 min once - it's over half an hour of my life!
Hi David,
Please check the help below document:
https://helpx.Adobe.com/creative-cloud/KB/Error_Code_2_failed_update.html
Kind regards
Sheena
-
Simple way to compensate for the entry of data into an EditField?
I'm keen to make an edit field with a small image on the left inside the parameter space. I can do it with a BackgroundFactory, but when the user enters the text, it seems bad and image overlays. Is there a simple way to push the starting point of the text box away a little so that I don't cover image? I guess this could be done with a HorizontalFieldManager, BitmapField and aText field, but it certainly wouldn't be easy because of the border that I currently use.
I'll respond and say I found an answer that was not too demanding.
First of all, I place a VertFieldMan with the gradient background I wanted. Then, I set up a HorizFieldMan with the border I wanted around the domestic fields and a white Uni. Then I added a bitmapfield (the image has a white BG) and a textfield to the HFM. The trick was the TextField to draw its own border, so I changed it' to border to the one created with a simple white frame. The result is that it looks like an editable with the image field to the left and the part of editable text left to right.
-
VPN Cisco ASA 5540 L2L - one-way traffic only for the pair to a network
Hello
I'm a little confused as to which is the problem. This is the premise for the problem I have face.
One of our big clients has a Cisco ASA5540 (8.2 (2)) failover (active / standby). Early last year, we have configured a VPN from Lan to Lan to a 3rd party site (a device of control point on their end). He worked until early this week when suddenly the connection problems.
Only 1 of the 3 networks the / guests can access a remote network on the other side. 2 others have suddenly stopped working. We do not know of any change on our side and the remote end also insists that their end configurations are correct (and what information they sent me it seems to be correct)
So essentially the encryption field is configured as follows:
access-list
line 1 permit extended ip 10.238.57.21 host 10.82.0.202 (hitcnt = 2)
access-listline 2 extended permit ip 10.207.0.0 255.255.0.0 10.82.0.200 255.255.255.252 (hitcnt = 198)
access-listline 3 extended permit ip 10.231.191.0 255.255.255.0 10.82.0.200 255.255.255.252 (hitcnt = 173) Free NAT has been configured as follows (names modified interfaces):
NAT (interface1) 0-list of access to the INTERIOR-VPN-SHEEP
the INTERIOR-VPN-SHEEP line 1 permit access list extended ip 10.231.191.0 255.255.255.0 10.82.0.200 255.255.255.252
permit for Access-list SHEEP-VPN-INSIDE line lengthened 2 ip host 10.238.57.21 10.82.0.202NAT (interface2) 0-list of access VPN-SHEEP
VPN-SHEEP line 1 permit access list extended ip 10.207.0.0 255.255.0.0 10.82.0.200 255.255.255.252
After the problem started only 10.207.0.0/16 network connections worked for the site remote 10.82.0.200/30. All other connections do not work.
There has been no change made on our side and on the side remote also insists there has been no change. I also checked how long the ASAs have been upward and how long the same device has been active in the failover. Both have been at the same time (about a year)
The main problem is that users of the 10.231.191.0/24 cant access remote network network. However, the remote user can initiate and implement the VPN on their side but usually get any return traffic. Ive also checked that the routes are configured correctly in the routers in core for the return of their connections traffic should go back to the firewall.
Also used of "packet - trace" event raising the VPN tunnel (even if it passes the phases VPN). For my understanding "packet - trace" alone with the IP source and destination addresses must activate the VPN connection (even if it generates no traffic to the current tunnel).
This is printing to the following command: "packet - trace entry interface1 tcp 10.231.191.100 1025 10.82.0.203 80.
Phase: 1
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit rule
Additional information:
MAC access listPhase: 2
Type: FLOW-SEARCH
Subtype:
Result: ALLOW
Config:
Additional information:
Not found no corresponding stream, creating a new streamPhase: 3
Type:-ROUTE SEARCH
Subtype: entry
Result: ALLOW
Config:
Additional information:
in 10.82.0.200 255.255.255.252 outsidePhase: 4
Type: ACCESS-LIST
Subtype: Journal
Result: ALLOW
Config:Access-group interface interface1
access-list extendedallow ip 10.231.191.0 255.255.255.0 10.82.0.200 255.255.255.252
Additional information:Phase: 5
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional information:Phase: 6
Type: INSPECT
Subtype: np - inspect
Result: ALLOW
Config:
class-map inspection_default
match default-inspection-traffic
Policy-map global_policy
class inspection_default
inspect the http
global service-policy global_policy
Additional information:Phase: 7
Type: FOVER
Subtype: Eve-updated
Result: ALLOW
Config:
Additional information:Phase: 8
Type: NAT-FREE
Subtype:
Result: ALLOW
Config:
NAT-control
is the intellectual property inside 10.231.191.0 255.255.255.0 outside 10.82.0.200 255.255.255.252
Exempt from NAT
translate_hits = 32, untranslate_hits = 35251
Additional information:-Phase 9 is a static nat of the problem to another network interface. Don't know why his watch to print.
Phase: 9
Type: NAT
Subtype: host-limits
Result: ALLOW
Config:
static (interface1, interface3) 10.231.0.0 10.231.0.0 255.255.0.0 subnet mask
NAT-control
is the intellectual property inside 10.231.0.0 255.255.0.0 interface3 all
static translation at 10.231.0.0
translate_hits = 153954, untranslate_hits = 88
Additional information:-Phase 10 seems to be the default NAT for the local network configuration when traffic is to the Internet
Phase: 10
Type: NAT
Subtype:
Result: ALLOW
Config:
NAT (interface1) 5 10.231.191.0 255.255.255.0
NAT-control
is the intellectual property inside 10.231.191.0 255.255.255.0 outside of any
dynamic translation of hen 5 (y.y.y.y)
translate_hits = 3048900, untranslate_hits = 77195
Additional information:Phase: 11
Type: VPN
Subtype: encrypt
Result: ALLOW
Config:
Additional information:Phase: 12
Type: VPN
Subtype: ipsec-tunnel-flow
Result: ALLOW
Config:
Additional information:Phase: 13
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional information:Phase: 14
Type: CREATING STREAMS
Subtype:
Result: ALLOW
Config:
Additional information:
New workflow created with the 1047981896 id, package sent to the next moduleResult:
input interface: interface1
entry status: to the top
entry-line-status: to the top
output interface: outside
the status of the output: to the top
output-line-status: to the top
Action: allowSo, basically, the connection should properly go to connect VPN L2L but yet is not. I tried to generate customer traffic of base (with the source IP address of the client network and I see the connection on the firewall, but yet there is absolutely no encapsulated packets when I check "crypto ipsec to show his" regarding this connection VPN L2L.) Its almost as if the firewall only transfers the packets on the external interface instead of encapsulating for VPN?
And as I said, at the same time the remote end can activate the connection between these 2 networks very well, but just won't get any traffic back to their echo ICMP messages.
access-list extended
allow ip 10.231.191.0 255.255.255.0 10.82.0.200 255.255.255.252
local ident (addr, mask, prot, port): (10.231.191.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (10.82.0.200/255.255.255.252/0/0)
current_peer: y.y.y.y#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 131, #pkts decrypt: 131, #pkts check: 131
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0If it was just a routing problem it would be a simple thing to fix, but it is not because I can see the connection I have to confirm it by the router base on the firewall, but they don't just get passed on to the VPN connection.
Could this happen due to a bug in the Software ASA? Would this be something with Checkpoint VPN device? (I have absolutely no experience with devices of control point)
If there is any essential information that I can give, please ask.
-Jouni
Jouni,
8.2.4.1 is the minimum - 8.2.4 had some issues (including TCP proxy).
If this does not resolve the problem - I suggest open TAC box to get to the bottom of this ;-)
Marcin
-
Help understand the Double billing for the same product on the same account
Recently, I realized that I make double charge on my account from creative cloud for the same exact items charged to the exact same credit card. In addition, I must say that I had two accounts still somehow. It is because I have lost access to the associated e-mail account and do could not connect. When I talked to Adobe at this time there they notify that I have create a new account with a new email, I did. That being said, every month for almost a year I was charged $31,79 and the new account as well. (I admit I'm not very good about checking all my automatic subscriptions online monthly but supposed to Adobe as a company highly and popular, could do things). I called and the first representative I spoke with today understands the problem and transferred to me for a refund, however once transferred, the representative was not only do not understand but rude and gave me a refund for 6 months. As of today, they canceled the account I have not used and me be charged twice a month for but only paid 6 months more than 12 months of double billing. The representative tried to tell me he was doing me a favor because I wasn't in charge of normal early termination fees. It has become so confusing and so I did at that moment that I said I would get more help here in the forums...
1. I'm trying to understand why in the world they would even charge me a cancellation fee when I was clearly NOT cancellation of an account, just to make a change, which was made according to the way which they charged me and, of course, who they do not now recognize?
2. How can I reload the same exact account for exactly the same product with activation of the said product as a single computer, and no other user (not to mention that I just used the product)?
Any help or advice would be appreciated!
All first of all my apologies for the not so pleasant experience.
The Adobe ID here in the forum has a CC bought in March 2016 with no cases registered.
I understand that this is for another subscription CC, could you please me message in private closed, the file number or the number of order which you have been invoiced in duplicate.
I can probably follow that.
Concerning
Stéphane
-
WINDOWS XP
"This program is not responding...". »
I then have to click on the right upper window X two times to close the window. When it closes Finally, everything on the desktop disappears for about 3 seconds then reappears as if the PC restarted, but it does not actually restart.
My images, the other day, all open without this feeze/final issue. I don't have these problems when you use Windows XP Paint, Jasc Paint Shop, or Quicktime to open images, once set by default... Just does not work with Windows Picture and Fax Viewer more and all my photos are already defined (default) to open with Windows Picture and Fax Viewer - clicking Properties confirms this.
Also, if I right click on the individual image to 'open with' and manually choose 'open with' Windows Picture and Fax Viewer, it will then open and I can scroll all the following pictures an image in Windows Picture and Fax Viewer. "But I can't just click on an individual picture, otherwise, it will freeze just straight up. Difficulty It Center Microsoft could not automatically repair because the shimgvw.dll file already exists.
I used to always use Windows Picture and Fax Viewer with no such problems. I have not the slightest idea what happened... even though I was messing around with 1) Component Services > Security Com > permissions & launch Activate and Run permissions) 2 > Regedit > Edit > "Permissions" last week and changed "Registered Owner" in HKEY LOCAL MACHINE and some other stuff like that. Could permissions and changing names have caused this unexpected problem in Windows Picture and Fax Viewer? If so, the changes I made will not be changed back, then how can I fix a broken Windows Picture and Fax Viewer? And if these changes, last week, have nothing to do with this "opening images in the image Windows and Fax Viewer problem,' so what?
I did your suggestion before posting here. I saw the same solution as your addition, the interpreter, but it does not solve the problem because I already had the shimgvw.dll etc. in their proper place and my photos/images were not always open with Windows Picture and Fax Viewer the way I wanted them to open.
Since I got my photos all open as I wanted (as before) this way to use Windows Picture and Fax viewer:
Control Panel > Folder Options > File Types: I changed then each file/folder associated with 'images' to open with Windows Picture and Fax Viewer. I determined this by reading the details for each extension / the item highlighted. If the referenced details 'images', I then clicked on change and choose Windows Picture and Fax Viewer to open the extension.
I went through everything everyone who was not obvious that they are. I made a change: BMP, GIF, EMF, JFIF, JPE, JPEG, etc... I changed at least 12 (more than I thought it was).
Immediately after changing all of these types of files, I rebooted and Windows Picture and Fax Viewer was still working the way I wanted to (as before).
-
I received this delicate task, and I can understand not just how to replace all parts.
I need to create a script that will be smartly decided what data store to deploy a virtual computer. We do not want to deploy in a data store that has the most space, we want to deploy to the data store that has the least space but can still account for the space for the (vm + 5%) and still leave 50 GB free on the lun after the move.
Thus, for example, if the virtual machine is 40 GB, we want the script to select the data store that has a close to 90 GB available without being under.
So my thought for this approach is:
- Create the query to get all the relevant LUNS. This excludes all the LUNS with the 'local' name in it and excludes all LUN owners (who have a slightly different naming convention then our general shared storage LUNS)
- This piece, which I partially understood
- Get-datastore. WHERE-object {($_.)} Name: corresponds to "PAR0 [1-4] _ [edp] * disk *")- and ($_.) "." Name - notmatch 'local')}
- Now, I need to get all of their total size and free space. Perhaps export this list to a CSV, however if I have to.
- Create a variable that contains: the size of the total virtual machine to the virtual machine that is deployed before its deployment.
- Deduct vm size against each data store size and pull in some way that that also close to 50 GB free on the data store and still facilitates the deployment of the vm.
- This piece, which I partially understood
I have a few other scripts, I scrounged on the internet that I tried to restore... but I just don't calm not having all the pieces...
- Get-Datastore. Where-Object {$_.} ParentFolder-match 'Internal'} ' | Select-Object - property data center, FreeSpaceMB, CapacityMB name, ' | Tri-objet-property FreeSpaceMB
- Select-Object Name,@{n="CapacityGB";e={[math]::round (($_.)) {{(CapacityMB/1024))}}, @{n = "FreeSpaceGB"; e = {[math]: round (($_.))}} {{(FreeSpaceMB/1024))}}, @{n = "FreeSpacePercent"; e = {[math]: round (($_.))}} FreeSpaceMB / $_. {{(CapacityMB*100))}} | Sort-Object FreeSpaceGB
Any help would be greatly appreciated!
-Knotz
Try something like this
# Get all data warehouses
$ds = get-Datastore. Where-Object {($_.)} Name: corresponds to "PAR0 [1-4] _ [edp] * disk *")- and ($_.) "." Name - notmatch 'local')} |
Select-Object Name,
@{n = "CapacityGB"; e = {[math]: round (($_.))}} {{(CapacityMB/1024))}}.
@{n = "FreeSpaceGB"; e = {[math]: round (($_.))}} {{(FreeSpaceMB/1024))}}.
@{n = "FreeSpacePercent"; e = {[math]: round (($_.))}} FreeSpaceMB / $_. {{(CapacityMB*100))}}
{foreach ($vm in Get - VM)
# Find possible candidates
$candidates = $ds | where {($_.)} FreeSpaceGB - $vm. (UsedSpaceGB-50) - gt 0}
# Find the best candidate
$target = $candidates | Tri-objet-property FreeSpaceGB-descending | Select - 1 first
Write-Output "VM $($vm.). Name) can go to $($target.) (Name) ".
}
- Create the query to get all the relevant LUNS. This excludes all the LUNS with the 'local' name in it and excludes all LUN owners (who have a slightly different naming convention then our general shared storage LUNS)
-
Hello
In the DEPENDENCIES of DBA, I can see that I have (seen here) according to some a table objects:
-SQL > select type, name
-2 from dba_dependencies where REFERENCED_OWNER = upper ('stuff')
--3 and REFERENCED_name = upper ('st_tab') and type = "VIEW";
-NAME OF THE OWNER TYPE
-- ----- ----- ------------------
-VIEW STUFF STTAB_4MV_VW
-VIEW STUFF STTAB_VW
But trying to recover these definitions 2 times I get an error:
-SQL > select dbms_metadata.get_dependent_ddl ('VIEW', 'ST_TAB', 'STUFF') def double;
-ERROR:
-ORA-31604: NAME parameter invalid "BASE_OBJECT_NAME" for the type of VIEW object in the function SET_FILTER
-ORA-06512: at "SYS." DBMS_SYS_ERROR', line 116
-ORA-06512: at "SYS." DBMS_METADATA_INT', line 4705
-ORA-06512: at "SYS." DBMS_METADATA_INT', line 8582
-ORA-06512: at "SYS." Dbms_metadata", line 2882
For some objects, it works (triggers, index), but for others (views, procedures, packages), it still fails with ORA 31604.
If I make a direct call on dbms_metadata.get_ddl ('DISPLAY', 'STTAB_4MV_VW', 'STUFF'), it works fine.
Everyone has seen this behavior before? (tried this code on 10g and 11g)
Thank you very much.
Kind regards
SEB
For some objects, it works (triggers, index), but for others (views, procedures, packages), it still fails with ORA 31604.
Exactly! That's what he should do. Dependent on DOF is for objects that are actually part of the table.
If I make a direct call on dbms_metadata.get_ddl ('DISPLAY', 'STTAB_4MV_VW', 'STUFF'), it works fine.
Exactly! That's how you get the DDL for views and other types of distinct objects. Provide you with the type of object as the first parameter.
Everyone has seen this behavior before? (tried this code on 10g and 11g)
Sure! This is a normal behavior.
See chapter doc DBMS_METADATA packages and Types
http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28419/d_metada.htm#i1019414
Notes on use
- These functions allow you to extract metadata for objects with a single call. They encapsulate calls to
OPEN
,SET_FILTER
, and so on. The function you use depends on the characteristics of the type of object and if you want the DDL or XML. GET_xxx
is used to fetch named objects, especially schema objects (tables, views).GET_DEPENDENT_xxx
is used to extract dependent objects (audits, grants of the object).GET_GRANTED_xxx
is used to retrieve issued objects (System of subsidies, scholarships of role).
- For certain types of objects, you can use more than one function. For example, you can use
GET_xxx
to fetch a name index, orGET_DEPENDENT_xxx
to fetch the same index by specifying the table on which it is defined.
See also table 74-11 in this doc for a table showing the types of objects.
http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28419/d_metada.htm#BGBIEDIA
- These functions allow you to extract metadata for objects with a single call. They encapsulate calls to
Maybe you are looking for
-
U.S. regional settings are wrong when English is not the language of the phone
Reminder: for a couple of years ago I had my phone language Italian, but because I have an app that I rely that crashes when the numbers are 1.234,67 I used locale in the United States. It worked well. Ive spent the last 4 months in Italy and does n
-
acquisition and generation of signals synchronized redpitaya impetus
Hi, I'm new in collaboration with redpitaya and labview. I've been trying to get the example of the "generation of signals a synchronized pulse and acquisition" has worked with labview. But I have a few problems. FISLY, when I downloaded it, some var
-
Original title: race Roller Coaster Tycoon 3 When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?
-
Windows 7 activation notifications popping up on old PC
We have an unusual problem with some W7 workstations using Maks. The problem is that we have an abnormal number of PCs suddenly asking to be activated. We are able to activate successfully, however the guest seems to come back. The event viewer is
-
iPhone vpn client stopped working
I have a 5510 ASA and we use customer Cisco vpn on the iPhone 3G for 2 years. Two weeks ago, we had a consultant put in place a failover site to site on our ASAs VPN. This day here of iPhone VPN client has stopped working on all iPhones. The VPN c