WebWorks & ripple: package & sign: cannot sign the application - could not find signature keys

Similar Questions

• Cannot sign application-unable to find signature keys

  Hi, I received a file .csj of the RIM, but I can't use it because the signing tool requires the .csi file.

  When I try to create key using java-jar SignatureTool.jar

  Messages

  The system requires a .csi file or .cod... the program assumes that the extension is .cod

  Generate a private key

  request password

  generation of key...

  the file extension does not match... coming out

  What should I do?

  I'm also confused do we have to compile the .zip files using this key? Compilation of the said process "don't sign application-unable to find signature keys.

  Thank you

  Ooops I was testing with key playbook, csi works for smartphones.

• The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  
  

  Hi Marcelo,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• Cannot install Anno 2070 error: the installed version of the application could not be determined.

  Original title: Impossible to install Anno 2070

  Hello

  I don't know if this is the right place for questions related game, but I tried the official forum and have had no luck with the solutions presented.

  I've installed Anno 2070 (Ubisoft) and played. By a strange Act of Murphy's law the game no longer works, so I uninstalled and tried reinstalling, but whenever I try to install it, I get this message:
  The installed version of the application could not be determined.
  The installation will end today.
  What can I do?

  Hello

  1. How are you trying to install?

  2. which version of the operating system is installed on your computer?

  I suggest you to try the steps below and check if it helps.

  Method 1: Set up your computer in a clean boot state and then try to install the game.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Solve the problems installing and uninstalling the programs on Windows computers. http://support.Microsoft.com/kb/2438651

  If the problem persists, then try to keep in touch with the support of UBISOFT.

  http://www.Ubi.com/us/games/info.aspx?pid=9651

  Hope this information is useful.

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey

• Error message the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file.

  
  

  The error message happens chronically today.

  It does not matter what I try to install the air file.

  I uninstalled, cleaned the registry and all the usual things.

  And then re-installed-with the same error messages

  
  

  Windows 7. Current update.

  processor 2.8 ghz, 12 G Ram - one machine to cook breakfast and make the beds.

  
  

  
  

  " The application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. "

  
  

  
  

  This is the last log of installation-

  I am not able to find out how to decipher what it means.

  
  

  Someone would have noticed?
  

  
  

  [2015-02 - 18:10:58:58] Unpackaging/validation complete

  [2015-02 - 18:10:58:58] no app location to "LocalizerLeadsTool" appID and pubID "

  [2015-02 - 18:10:59:01] conversion of unpackaged to a native installation package in C:\Users\admin\AppData\Local\Temp\flaAA62.tmp application

  [2015-02 - 18:10:59:02] create an installation package Native failed: [ErrorEvent type = "error" bubbles = false cancelable = false eventPhase = 2 text = "unhandled exception error: EndUpdateResource: error Windows #5" errorID = 0]

  [2015-02 - 18:10:59:03]

  I got a response on another area of support.

  And

  Because I asked for help here-

  I think it's the kind of thing to do to post the

  steps that allowed me to correct.

  I knew I had the latest Adobe air platform.

  I felt that I knew that the download files were updated.

  So-

  What was one of the suggestions I've had -

  Told to turn off the firewall and antivirus.

  Instinct made me disconnect the machine from the router.

  I continued and disabled all the protections I had put in place-

  and watched as the first program installed air -.

  Since before January.

  Then put those protections back in line.

  And re-attached the router line.

  It doesn't seem to work now.

• The application could not start correctly (0xc000007b) hearing CC last fix? Teacher of Win7

  A different user name, password,..., control given to the creative cloud, install hearing... then

  "The application could not start correctly (0xc000007b)" in the hearing of the CP. So re-installed. I offended want to spend hours trying to get Adobe software to run.  It's my download trial application to see how it worked. And he does not. And there are a lot of messages with advice complicated... ending by - go looking for someone to chat support. And they are not available. aaaaggggghhhhh

  I am now worried that installing any other application of dnuee may cause problems on my PC with Adobe's other SW.

  What is the newest way (and hopefully simple) to get this program to run?

  I have no ilivid,

  I: CS5, teacher of Win 7, installed through some Soft Adobe dnuee who told me to install and use to manage your CC account,.

  Grateful for all who can wand.

  Especially linked gave this soln:

  1. Please try to download a DLL https://drive.google.com/file/d/0B4eWI-NGpmnuTUxPQVIxYThSNlE/edit?usp=sharing

  2. the package contains the msvcr100.dll and msvcr80.dll files. Extract the contents of the package at the following location:

  ....

  I copied the 2 files DLL in the folder C:\program files\Adobe\audition cc 2014 and it worked. SIMPLE! YEH.

  Thank you

• Try reinstalling firefox on a windows machine 7 and I get «the application could not start correctly (0xc0000142)»

  To solve a different problem, I uninstalled Firefox. After you have solved the other issue I'm tying to re - install Firefox and get an error message that says that "the application could not start correctly (0xc0000142). Click OK to close the application. "The title bar of the window, said"setup - stub.exe - Application error. "My PC is a Dell Studio 19 all-in-one running Windows 7 Home Premium.

  I ended up solving this problem by doing a reinstall on Windows 7 site. It took a little while but fixed this and a few other issues I've had.

• There is a problem of backup applications to iTunes to my new iPhone 6 s. apparently, there is an error that says that the applications could not be found. Why can't I make the backup?

  There is a problem of backup applications to i Tunes (previously synced from my iPhone 6) to my new iPhone 6 s. apparently, there is an error and the applications could not be found. How to solve this?

  Are the 6 and 6 times on the same iOS?

  ITunes is also the last version 12.3.3?

• During the installation of Windows, shows that an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  An error internal occureed in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  original title: an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  Hello Stephen,
  try to run the "Startup Repair" utility located on your installation DVD.
  hope this helps
  Eddie B.

• the Task Manager won't start don't no error "the application could not initialize properly (0xc0000006.

  I've heard fans speed medium speed and high when I don't do anything that would require heavy resources. I tried the two Ctrl-alt-delete and right-click in the taskbar, and it fails to start. "The application could not initialize properly (0xc0000006). Click OK to close the application. "I click OK and it pops up again and then I click OK again and it goes.

  I ran AVG and Spybot in safe mode with network but nothing detected... and you erased my memory of page file also.
  It is simply damaged or make me a bug/virus.
  HP D220 desktop model

  Ok. What I wanted to say, this is so that YOU can see the file, you must be able to view hidden and system files. Windows will however see the file any if YOU can see it or not.

  In autoruns, in my opinion, you have not clicked on 'options', then 'Filter Options '.
  Make sure that all check boxes are cleared in 'Filter Options '.

  Tomorrow, I would like for you to delete infected tasks Manager by HP. And copy the Dell2 for HP-infected Task Manager. Just in case the task manager has been infected and start actually malware.

  So, tomorrow,

  -Alex

• An internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 of error in windows 7 Home premium 64-bit OS.

  I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?

  I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?

  You have posted in forum Windows XP hardware and drivers.  You should have posted in forum Windows 7, probably the forumprograms .

  If you post here, remember to include the name of the application that could not be loaded. Is Yahoo Messenger? Something else ("all applications for which I get this error")?

  Your question is also confusing: you get this error message every time that you do a reboot?

  You can use msconfigor Autoruns (look at the 'Connection' tab) to temporarily disable programs that start automatically when you log in to isolate the application that is causing the problem.

• Setup error Application-"the application could not initialize properly (Oxc0000135). Click on OK to terminate the application. »

  Had this feature Sharper Image 5 days weather for Christmas and of course we have over-paid for her-$50 bed bath & beyond.  I'm not as technical as most of you, but I am unable to even get the software to install.  I get an application error installation "the application could not initialize properly (Oxc0000135).  Click on OK to terminate the application. "I got the Version 1.01 in the box (and it does not say is the app forecast 4 days) and am running XP.  Thanks in advance for any help - of course, the is Helpline is to give an ambiguous 'we are closed for the holidays' without parameters for the last seven days... Grrr...

  Sure that the error occurs when you don't have a .NET framework is installed on your system. You can download/install here: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=26

• Error Windows Live Mail: Windows Live Mail could not be started. The application could not open Windows Live Mail, mailbox messages.

  original title: Windows Live Mail

  I am trying to send messages on my own page of email, but windows live mail does not accept my emails.

  The message I get is as follows:
  Windows Live Mail could not be started. The application could not open Windows Live Mail, mailbox messages. My Windows Live Mail mailbox data is currently used by another program, such as a virus scanner.

  I need to close the program or wait for it to complete its operation and then reopen Windows Live Mail. Are the numbers that I get this message: (0x800c0455, 997) then I ok this message and receive another message.

  Windows Live Mail could not be started because. MSmail.dll could not be initialized.
  Windows Live Mail may not be installed correctly.

  Can you please help me settle this question, as I have a lot of mail to be sent to my e-mail address?

  Hello Annie,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• lsasss.exe - application error "the application could not initialize properly (0xc0000006).

  Hi I was wondering if someone out there could help,

  My laptop is a packard bell Windows xp, when I turn on the laptop it does not completely load, it will take me to a black screen with the error message error lsasss.exe - request "the application could not initialize properly (0xc0000006). Click OK to close the application. But when I click ok nothing happens except disappears from the message bar and im left with a black screen. can someone tell me what to do?

  Hi beavarney,

  ·        Do you remember any changes made on your computer before the show?

  Security Authority Subsystem Service LSASS (local), is a process in Microsoft Windows operating systems that is responsible for enforcing the security policy on the system.

  Method 1:

  I suggest to start the computer in safe mode, you can check the link for the steps below: a description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Method 2:

  If you are unable to start the computer in safe mode then try last known good configuration. Link: How to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.