Weird display on my Qosmio E15-Av101 problem

Hi all

Strange problem... picked up this E15-AV101, with 1 GB of ram and a 100 GB HARD disk were wiped he and fees began with the disc in the Qosmio player, then the recovery disc.
Everything works fine in windows... but if the system is off and I try to use the qosmio player by pressing the tv button or the button next to it a white screen comes up to this black disapates with green and red lines, but I can hear the dvd playback and controls work.
This could be the cause that all works well under windows when I start Media Center.

Running bios version 1.60 and all the drivers the most recent on the site of

I hope someone has an idea of what I am puzzled

Thanks for any help you can offer

Mark

And it is a Toshiba support forum... More like end users who do not have a clue... Solved the problem myself, I hope no one else has this problem because you won't get any help from this site!

Tags: Toshiba

Similar Questions

  • Tuner TV Qosmio E15 - AV101 does not work

    Hello
    I bought Qosmio E15-AV101 without recovery CD, I downoladed driver form toshiba web site.
    then I installed windows XP Media Center on it, but when I tried to lunch the tv there was a message (this device is already in use by another program). I tried to stop some services and tasks, but it was the same thing.
    then I formatted my computer and installed windows XP SP2 and I tried to capture for TV using Windows Move Maker, but the result was the same.
    also, I installed windows vista... the same thing.

    can someone tell me what is the problem?
    Thank you in advance.

    Hello

    have you ever tried using the program "Dscaler"? With this program you can watch television with your card and almost all of the known cards run with this application without the need of some additional drivers.

    Just try it and give some feedback if it works.

    Here´s the link: http://www.dscaler.org/

    See you soon

  • Qosmio E15: How to upgrade Media Center 2002 SP1 to SP2?

    Hello

    My Qosmio E15-AV101 was shupped with Media Center 2002 SP1. I did the automatic update from Microsoft and also downloaded the SP2 package. Still, the upgrade process fails. When I'm tired, I contacted MS technical assistance for the reason my Media center rejecting the upgrade. Microsoft replyed than the version supplied with Toshiba and other equipment manufacturers are customized to match the hardware manufacturer full compatibility.
    Quote:
    "
    Notes of this part of the OEM and Microsoft agreement is to allow Original Equipment Manufacturer support for the products they have installed on a particular computer. The agreement was presented only the OEM often change and pre-install Microsoft software on their computers to ensure compatibility and to take full advantage of your computer s hardware. This means that the OEM has expertise on your Microsoft software on your computer in particular works.
    "

    So, is the solution to my problem. How to upgrade?

    Hello

    First of all it is a user to user forum and you won't find anyone from Toshiba.
    Secondly, as far as I know that your device was designed for an American market and if you are looking for drivers or updates you must use a Web from Toshiba site we:
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

    If you have any problems with your unit, so you must contact the ASP (authorized service partner Toshiba) in your country.

    As far as I know that Windows Vista is not official on the market. Maybe the end of the year or next year.
    I can t believe that you are not available to install the updates. I checked a few comments and Microsoft updates have always worked.

    As I suggested at the beginning if you have some problems with your unit has so contact the service of Toshiba.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

  • Update BIOS on the Qosmio F30 - ACPI problem

    I've updated the BIOS on my Toshiba Qosmio F30 - 140 and I have issues with the management of ACPI.

    When I try to run Ubuntu 9.04 or 9.10, I see constantly typed characters - "^ [[B ', which cancel all important processes.
    When I add "acpi = off" option to GRUB the problem seems not apear, but I do not have access to important features (like changing the brightness of the display). How to solve this problem?

    Hi Kojot89,
    first: "never touch a running system", but you already know...

    with this new bios, you have enabled some features of the motherboard...
    Try this:
    -turn off acpi in the bios mode, if possible
    -patch your kernel to use the acpi features
    - or disable the use of the features of acpi by boot-cheats

    as you say the problem doesn't exist when starting with "acpi = off".
    display brightness and the cooling of the processor are the main features of acpi to save energy, if your kernel can not handle
    check_acpi_ignore = 1 might be a way to make it work

    way the easiest way is to reinstall the system...

  • Qosmio X 300-problem with the graphics driver

    Greetings,

    My X 300 has worked very well and I am using 186 drivers of Toshiba (Windows 7) and completely by the book. Now, my computer is start planting as much UNLESS I have uninstall the graphics drivers from Toshiba, because then it is stable. Sometimes the driver resets, the computer sometimes go to BSOD immediately (he does eventually in any case). Thus, for the moment, it has no driver installed, but driver VGA standard that comes with Windows 7.

    The question is what do I do? A X 300 without proper graphics drivers is a sports car with pedals.

    Any input would be much appreciated!

    Best regards
    Johan

    PS. the warranty has expired, so no free service.

    Hello

    Have you noticed the same problem on Vista preinstalled Toshiba version?

    At the moment, I can t imagine that the display driver itself is really the problem because pilots are pre-tested by Toshiba and I didn t has seen similar topics here in the forum about display driver not work. Maybe another program is causing this problem

    What you can do is to test the Qosmio X 500 display driver. There is a newer version. You should check this.

    By the way: since when did you notice this problem? I ask this question because a restore of the system to an earlier point could also be helpful

  • QosmioPlayer on Qosmio E15-A101

    Where can I find the repair for Qosmio E15-A101 QosmioPlayer... CD image?

    Hello Vladimir

    Qosmioplayer is delivered on the separate recovery CD and you can't find it on the recovery DVDs. I'm not 100% sure, but I imagine that your Qosmio is an American model and everything else you need you can find on Toshiba we support page http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

    Unfortunately I didn t Qosmioplayer find. I don't know how it works in US, but you can try to install Qosmioplayer from European support page. Check it please http://eu.computers.toshiba-europe.com support & downloads.

  • Can I turn off the display on the Qosmio X 770 while I am running programs?

    Can I turn off the display of my Qosmio X 770 while I'm running programs such as virus scans to save power and the screen? Most laptops have a function key to enable this.

    Hello

    Of course you can do it.
    You can change the settings of your central in Win 7 power management settings.

    Go to the control panel-> power-> Plan on changes of settings Options

    Now, change the setting to turn off the display.
    I would have put a min

    In such cases the fi would not touch to the laptop for a min the screen turns off

  • After installing windows optionally updated my display driver is the cause of problems

    I have DELL Inspiron 14 with windows 7 home preium

    After installing windows optionally updated my display driver is the cause of problems
    Ran troubleshooting it says "material changes could not have been detected.
    Help, please
    Thank you

    Use the function "restore" to restore your system to a point before installing optional updates in windows.

    After that, go to Windows Update and 'hide' the update that caused the problem.

  • Display and boot on Qosmio G30-117 problems

    Hello

    My Qosmio G30 (117) has problems to start. Basically the Qosmio title displays properly, but as soon as Windows XP appears, it is as a grid of white dots on the screen. He will then drain and take forever to get into windows. The grid of points remains all the time.

    My hypothesis is that sound my display driver, but get an update is a challenge. When I try to download from the page drivers it says that there is none. The search is based on the model of my PC, it should be no wizard

    I can't get into XP in safe mode.

    Real question is, is this my driver or is this a hardware problem?

    Thanks for your help,
    Peter

    Hi guy,

    that looks a little a hardware problem but before we get into it, you should download www.laptopvideo2go.com drivers (Please read the FAQS on this site!) and then, if the problem persists after installing new drivers, you must contact a local authorized toshiba service.

    I give you a link if you really want to contact an ASP (Authorized Service Partner):

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    Good luck buddy and good weekend

  • Weird display on my Satellite P200 - 1 g 8 problem

    I bought my new laptop Satellite P200 - 1 g 8. I had some problems with the display cable.
    After that switch on and work for a few hours, the display is corrupted, or you can say distort.
    It is very difficult to explain in words. But when I restart or switch users, it starts, works very well and then again after 1-2 hours the screen suddenly corrupts.

    I've updated the drivers and Vista too, but I still have this problem. This problem comes then it distorts everything on the screen gave nothing.
    It is not overheating issue.

    If someone knows about it or anyone can help with this, thanks in advance.

    Thank you
    Cecile

    Hello

    To be honest, it is not easy to understand exactly what is happening. All you can do is install Vista with delivered recovery DVDs. This image has been tested and it should work well. If the problem persists, it must be checked by the service.

    Sorry, but I don't see another solution for you. As I have written before that it is not easy to understand exactly what is happening and what it looks like.

    This occurs if you use a specific application?

  • Qosmio G40-108: problem with the highest starange display resolution

    I just had mine but on its highest resolution all Web pages have these 11 blocks rectangular semi, barely visible, only the bottom, each about an inch long, is this normal and should I send it to the object of an investigation?

    Hello

    It is very nice to hear that you already have the new Qosmio notebook. I can't say much about your problem because without a screenshot, it is not easy to understand what you mean exactly. On my Qosmio G30 (with the same HD resolution) I have no problem at all. Because of this I can't really understand what the problem is here.

    If possible send a link where we can see what it looks like. Your description is not enough.
    BTW: have you noticed that on web pages only?

  • WebView weird display problem (of colored rectangles) - Debug Mode

    Hello

    I had a problem with a JavaFX Webview.

    Everything loads fine, but each element in the DOM of the page (including the body) is overlaid with a rectangle of color random when hovered.

    After a few seconds the entire page is makes it unreadable and only a weird mix of colors.

    It works without problem in the whole of JavaFX example, so I think that it is not a problem of javafx, but I am doing something wrong somewhere else in my application.

    The initialization code is the same as in the example:

    webview = new WebView();
    previewStage.getChildren().add(webview);
    
    final WebEngine webEngine = webview.getEngine();
    webEngine.load("http://www.google.de");
    
    

    Thought it might be a problem of style sheet, but I removed all the style sheets and it looks always the same.

    I have attached some pictures of what it looks like.

    http://www.tinyuploads.com/images/31lf1b.PNG

    http://www.tinyuploads.com/images/UxK8wZ.PNG

    I appreciate all help.

    Thank you!

    It is https://javafx-jira.kenai.com/browse/RT-23846. Please make sure that you do not enable fine for the com.sun.javafx.webkit.prism.WCGraphicsPrismContext class.

  • Satellite C50D - B - 11 X - weird display problem after installing iTunes

    Hi all
    I just installed the latest version of iTunes on my Satellite C50D - B - 11 X, and now I can not see any picture of video players. reading online (youtube, etc.) or from CyberLink PowerDVD. All I get is a green screen where the video should be. The audio plays very well, but I do not see a thing. I uninstalled iTunes, but it made no difference. Any ideas?

    Thank you

    Adam

    I read in various forums that resettlement of the Quicktime would help solve this problem of green screen.

    In addition I recommend you to install the playback software VLC freeware for testing purposes.
    This player supports almost all video formats, and you should be able to read your local videos properly.

  • Portege M200 - weird display with docking station problem

    Hello

    I use a Portege M200 with MS Windows Vista and the Toshiba docking station. Whenever I connected the system closed down it will start with low light and different screen resolution. The brightness can then be adjusted in Vista.

    To solve the problem, I have to disconnect it, then put it in PC Mode and finally stop Vista. With the next offline boot, it works correctly and can be re-docked. Maybe it's just a lack of understanding of the system? It seems that with a rooted boot, nVidia somehow takes place or is there different profiles?

    Thank you!

    Alexander

    Hello

    At first, I must say that Portege M200 is old enough laptop model and I really wonder that Toshiba supports this model of laptop for Windows Vista. You are really lucky in this regard.

    In any case very important is info which edition of WXP Tablet Toshiba offered tools for/disconnect. If I remember well, it was utilitarian Toshiba Mobile Extension. Using this tool you has been able to use different settings for Bay service as well as for output screen to choose the correct resolution.

    Under Vista it is controlled by Vista and, AFAIK, Toshiba does not have any special utility for this. You must also understand that procedure/disconnect (power switching power supply) is controlled by Vista and I can imagine that under Vista it does not work perfectly.

    My opinion is that there is not much to do, but I hope I'm wrong on this issue. Let's see what else users of forum about this.

  • Qosmio X 300-problem of external monitor

    Hi all!

    I am the proud owner of a 300-157 x, but I have a problem. I would use my laptop as a desktop workstation and use an external VGA monitor to the output.
    Everything is fine when the operating system (Vista or Ubuntu) is responsible, but I can't figure out how to make the external monitor to view BIOS and POST messages to completely get rid of the internal display.

    Any clue?

    >... I can't understand how the external monitor to view BIOS and POST messages to completely get rid of the internal display.
    AFAIK this option doesn't exist. In General, computer laptop Qosmio is designed as a multimedia mobile gear and games. Of course you can use it with external screen or a TV, but I think that it is not designed to be desktop replacement. For example, professional laptop computers Tecra and Portege that can be used with a docking station to have multiply and different options for use with external display.

    I had X 300 but I ve never used it with external monitor so I can't say with certainty how it works but if I m remembering well this option to disable the laptop computer's display is not available.

    Every time when you want to use your laptop as a desktop replacement you should open it, start it, wait that the OS is fully charged, switch to the external display (FN + F5), and then close the cover.
    I know it's a little annoying, but, more or less, in 2 minutes, you can use your laptop as a desktop replacement, especially if you use an external wireless keyboard.

Maybe you are looking for