Weird form bug

So, I had to imitate a lower 3rd fact in After Effects in motion. The anim section draws an outline of a rounded rectangle that then fills in the color and text of bottom-3e. The result looks like this:

The animation of contour must start and end at the bottom right, above the curve of the angle and counterclockwise travel. For example, halfway through the anim - on (and with the filling and the hidden text) sketching would look like this:

To create this particular movement direction (and having the movement starts after the curved corner) I had to change the location of the individual points of the geometry, as they ran to the left (point 1 at the bottom right, point 2, top-right, point 3 above left and point 4 below left) and then animate the offset of end of the sketch. (Running the coordinates in a clockwise direction and animating the means of starting starting by the line offset before the corner rounded rectangle, which is not what I'm after).

So far so good, it works very well on the move, so I publish on FCPX, where it is not working properly - the outline emerges to the right left down instead of needles. Huh? When I then re-open the file motion, I find that the positions of the different points of the shape has been changed so that they are executed in the order in a clockwise direction (mainly point 2 and point 4 being traded). Then FCPX follow the instructions in the request file, but movement is reversing my explicit instructions in order to force a form of flow to the left. Why Motion care same order in which the points are in? Surely, he must just accept the coordinates given and work with them.

I found a bodge pick me up around him, but it would be better to know if there is a way to get the proposal to accept a shape counterclockwise.

How do you describe the shape? A behavior using write on? If so, leave to its default settings and rotate the shape 180 ° - 180 °, X-Z. That it will turn around (and it will not change how it is positioned). To set the bottom the right starting point (just above), convert them into Points (type Option-SHIFT-S or menu object > convert point or right click and select converted to Points on the shortcut menu.) Once converted, right click on bottom right corner, and then select: start of game. The animation will start just above the curve.

The problem with 'points' rectangles (and circles) is that once converted, it is impossible to maintain a curl even if you change the dimensions of the shape. If you can live with that, dating back to the 'old' point system is not a big deal.  You can add points any part of a shape and choose a moment as a starting point for writing on the animation (or simply keyframe start and end Point offsets in the form > hierarchical Inspector.)

Tags: Professional Applications

Similar Questions

  • Reset form bug - please help!

    Hello

    I created a form with fields to fill in, check boxes and a button to reset the form that is used on an iPad.  It seems that the reset form button has stopped working constantly on the iPad since the update (reset some fields, but not the others).  Has anyone else reported this bug?

    Please advise, thank you!

    Laurie

    Hi Laurie,

    I have determined that the cause of the problem.  The version of your PDF form March 2016 missing field entries.

    Here's a bit of technical documentation.

    There are two places in the format of PDF fields are saved.

    1. Catalog > AcroForm > fields
    2. Page > Annots

    The fields you mentioned in your response #4 (e.g. dealer name W9 W9 address, city of W9, W9, W9 Zip and State SSN1, 2 and 3) were not correctly written to location (1) in the version of March 2016 of the PDF form.  I checked with our internal tool to inspect the PDF form.

    I suspect that the problem was introduced in the PDF form, when you deleted a page, insert a new page, matched the fields, etc. using the desktop version of Acrobat Standard.

    Acrobat Reader apps for iOS and Android are looking at location (1) to identify all the existing fields in a PDF form.  If some fields do not appear in location (1), they are not recognized as such.  This is the reason why certain fields in your form are not reset.

    However, Acrobat/Reader desktop apps have the capacity expanded to find all existing fields of individual pages, (2) location in a PDF form, although some fields do not appear in location (1).

    To repair your PDF form, you must remove the 'missing' fields (who are not reset correctly) of individual pages and add new tool forms Acrobat Pro / standard.

    I'm sorry that it's rather a long and tedious process to repair the PDF form.  Unfortunately, I'm not aware of any PDF available in the trade of tools that can repair a faulty PDF form with a click of an edit button.

    I recommend you try to attach a small set of fields first.  You can look at the version of March 2016 of PDF form for reference.

    1. Select a page that contains fields that are not reset correctly.  Example: Page 5 (W9 form)
    2. Remove the fields that are not reset correctly.
    3. Add new fields with the same field properties and Associates, JavaScript, etc.
    4. Save the PDF form.
    5. Fill in the fields.
    6. Click the CLEAR FORM button to test if they are reset correctly.
    7. Repeat the steps above for other pages with the problem.

    Please let us know if you have any additional questions.

    You can also visit the Forms PDF forum, where employees of Adobe and experts with a thorough knowledge of Acrobat and Acrobat Pro/Standard forms and forms of third party tools.

  • M7 k111dx: supposed weird graphics bug after update to windows 10

    I upgraded to Win10 on day 1 and thought that everything was ok. Then I closed my computer and made after the drive hard light off, the power lights could not do the same thing. I had to make a "force stop" making them to extinguish. Windows don't think I did a force stop. I'm not sure what is the cause, but I would be really nice to fix. "Sleep" mode is also affected by this. "Sleep" mode is more annoying to get out of because it requires a judgment of strength to wake the computer. Windows recognizes it as such. One interesting thing I found out is that if I press volume up and volume down at the same time, the screen goes black for a second and then turns back on. It is followed by a beep. Since my laptop has a geforce 840 m in addition to the integrated graphics, I think that I spend between 2. It is of relavent because only the settings makes the light off when sleep and stop. I've updated my integrated and discrete graphics card drivers and it made this bug seems less random. (when I discovered the volume button thing). I have no way of knowing what GPU I use, but it's really important, as force stops really slow down my progress when you work. All accepted solutions.

    Hello @ethandrzb,

    Welcome to the Forums of HP Support!

    I read your post about the question of sleep mode and wanted to help you!

    Try to revisit these steps, by community member @DanG82, to see if the problem can be solved.  Please post back with the results:

    HOW TO SOLVE THE PROBLEMS OF SLEEP/SHUTDOWN

    1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
    2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
    3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
      • In Control Panel, select administrative tools, and open Services.
      • Go to Windows Update and double-click it to view its properties.
      • Click on stop to stop the service to run.
      • Change the Startup Type to manual, and then click OK.
    4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver.  If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
      • NOTE: You have NO need to uninstall version 11 before installing version 9 or 10.  The presence of a version of the driver is required to 'upgrade' (or demote in this case).
    5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver.  (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
    6. Change back the setting of Windows Update Services to manual automatic (delayed start).
    7. Restart your computer.
    8. Rejoice!  You can finally sleep and stop again.

    Source: How to solve the problems of upgrading 10 subsequent to Windows on HP laptops

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • Weird loading bug

    I'm on 5.0.1 and I meet a few bugs on this current version, the first is the problem of the consumption of RAM (something you all know) and the other happens when Im loading when my phone is off, but every time I do the screen goes out after it starts the charging process.

    You sideloaded a generation that is not official - so that we can not really help you or your problems until you get the final software and it's official.

    That's the danger of loading the software that is not sent to your Motorola phone. We can help only if you run the software pushed to your phone OTA from Motorola. Sideloading something you get from someone else is not acceptable.

  • CS5 brush dynamic form Bug

    Problem:

    When the 'dynamic form' option in the palette brushes is unchecked (i.e. disabled) brush is not affected - there always conical ends in the overview and in fact, based on the pen pressure, as if the dynamics of form was always on. Also restore the control to other settings other than the 'pen pressure' have no effect. Other tools that use the dynamics of form, such as the pencil tool, work as expected. In addition, Photoshop CS3 on the same machine, brush shape dynamic tool works as expected. See picture for details.


    Attempted fixes:

    1. Reset brushes
    2. Reinstalled Photoshop CS5
    3. Photoshop CS5 update
    4. Updated drivers Wacom Graphire 3
    5. OpenGL drawing off
    6. Restart the machine after each of the above

    Relevant details

    Snow Leopard 10.6.4

    Wacom Graphire 3

    Model name: MacBook Pro

    Model identifier: MacBookPro2, 2

    Processor name: Intel Core 2 Duo

    Processor speed: 2.33 GHz

    L2 Cache: 4 MB

    Memory: 4 GB

    ATI Radeon X 1600

    PS5-Brush-Dynamic-Problem.jpg

    Please give advice in order to correct this problem.

    You have"the tablet to control pressure" checked in the Options bar.

  • Comparison of JavaScript bug

    So I found a weird Javascript bug and was hoping someone could help me.

    If say

    var value = 40;

    var smallervalue = 8;

    If (value<>

    doSomething;

    }

    It always seems to work for some reason any even if 40 is > 8. This bug seems javascript is compared only the first digit of the report number to the integer value of the number. I m also using a 'table' for the value for the 'small' in my actual code. Could someone help me debug this? Thank you very much!

    I'll take a hypothesis that you end up with a string comparison.   One of the sillier confusions of JS.   Anyway try

    If (+ value< +smallervalue).="">

  • Bleeding of weird color in parts of my swf output

    We recently purchased Captivate 6 after testing of 5.5 last year. I tried to do a software simulation, but I noticed that in some parts of the .swf video, vivid yellow or pale squares or tasks appear on parts of the screen. In some places, it is more sensitive than others.

    I think I remember having this problem while testing Captivate 5.5 last year, but I can't find any notes about it, and I have not found a solution in the forums or on the web. If I remember correctly, the problem was caused by one of the recording settings. If I'm wrong about this, I'll have to re - register, but if I hold, in order to save the work I've done.

    Any ideas?

    Thank you

    Tammy

    Hello

    Try the slide properties. See if increasing the quality of aid. Personally, I like optimized, but experiment and see if it makes things disappear.

    If it's only a few slides, you'd better adjust individually. If almost all the slides, I would suggest opening Edit > Preferences and overall quality control.

    See you soon... Rick

    Useful and practical links

    Captivate wish form/Bug report form

    Certified Adobe Captivate training

    SorcerStone blog

    Captivate eBooks

  • Contents of bug or user error?

    Click on table of contents - I see all the slides.  I return to give meaningful names slides.  Table of contents do not recognize the new names - I find that I have to manually change all the names.  I think that he needs to pick up the new names.

    Is it me, or captivate 5 ignore the new names?

    Hello

    Looks like you just click on the button Reset TOC.

    See you soon... Rick

    Useful and practical links

    Begin to learn Captivate 5 times now! $29.95

    Captivate wish form/Bug report form

    Certified Adobe Captivate training

    SorcererStone blog

    Captivate eBooks

  • Help for an evaluation form!

    Hello

    I am using captivate 4 and in my e-Learning project, I need to create a form of feedback at the end of the project.

    So, how can I create a feedback form in captivate?

    When the user fills out the feedback form and click on submit, what he or she wrote in e-mail to a specific e-mail address.

    The form contains a text box in which the user can type in feedback. (I tried to use the text box, but that everything is what we type right on into a single line, if we press on enter the line does not change)

    And it will contain also some 'agree', 'strongly agree', 'disagree' of the survey questions.

    If anyone can help, I would really appreciate it.

    Hello

    Something like this you would be better served by creating an HTML form and the hosts on a server. Have the results of the form processed and sent via e-mail to the server transport. There are a few scripts server free but also inexpensive that you can use. You can study FormMail.

    I think you'll find yourself more frustrated, trying to Captivate. So I just a button or click box that opens the form.

    http://www.formmail.com/

    See you soon... Rick

    Useful and practical links

    Captivate wish form/Bug report form

    Certified Adobe Captivate training

    SorcererStone blog

    Captivate eBooks

  • Filling out a demo of the form

    What is the best way in Adobe Captivate to demonstrate to fill out a form with a Narration? I have several interactive pdf forms, and I want to be able to tell that I record the movements of the live action. I used the setting of software simulation and it ended up looking agitated and confused. I am a Captivate trial download and I would like to have this some how figured out before I decide to buy it. I bought a subscription to Lynda.com to try to understand a bit more, but it wasn't too much help. Any suggestions are greatly appreciated. Thank you

    Hello

    Typically, those are made by telling as you use the software. (I recently created some of them to another company. A competitor of Lynda)

    As you can imagine, it's often like shooting a film, and you end up with many "takes" to get just the right one.

    See you soon... Rick

    Useful and practical links

    Captivate wish form/Bug report form

    Certified Adobe Captivate training

    SorcerStone blog

    Captivate eBooks

  • Save the settings of the checkbox on the form

    I have created a form that I want to use a checklist for my users. On the form, I inserted a list of items, each accompanied by a checkbox. I would like the user to track their progress by checking a box.

    How can I make the guard setting the boxes form when the form is opened to the compiled help?

    Hello

    RoboHelp offer form elements, you can use, but that is where it stops. If you are committed to doing this work as you want, you need to study how to create and manipulate browser using JavaScript cookies.

    See you soon... Rick

    Useful and practical links

    Wish to RoboHelp form/Bug report form

    Begin to learn RoboHelp HTML 7 or 8 days - $24.95!

    Adobe Certified RoboHelp HTML Training

    SorcerStone blog

    RoboHelp EBooks

  • "bugs" fixed in Captivate 4?

    Questions has a 'bug' fixed Adobe Captivate 4 specifically, when you import Powerpoint slides in Captivate 4 in some cases added Captivate bullet points to a table... It's not good... Also, there are a few problems with the graphics imported into Captivate.  They would be very grainy.  I tried this in Captivate 3 then I used the presenter.  Not added bullets and graphics went well in presenter.  But with the presenter, it's a big challenge for editing audio files.  Raison d'etre, presenter cost number in the order of the audio files, they seem to be random.  This means that you have to hunt and peck to find the right audio file to change to the appropriate slide.

    Also, I get a "Powerpoint has encounterd a serious error in the presenter add-in, you want to turn it off?  I continue to selecting No, but it's annoying.

    Hi Rich

    Adobe Presenter forum is on the link below.

    Click here to see

    See you soon... Rick

    Useful and practical links

    Captivate wish form/Bug report form

    Certified Adobe Captivate training

    SorcerStone blog

    Captivate eBooks

  • CP9 why/how to convert all my conditional actions standard actions?

    I have a CP8 project I've been working for a few months now and finally upgraded to CP9. I realized immediately that one of my intelligent form buttons using rollover States had not the rollover State postponed from 8 to 9, so I saved a copy of the file in CP9 for I can have both versions open by-side if I could go back in the file CP8 to see how configure the States of turning so I could rebuild them at 9. This really isn't a big deal, but I find that each of my Advanced actions have been converted to a standard action.

    This is a preview of action in CP8:

    Clipboard03.jpg

    And it is so, it now appears in the CP9

    Clipboard05.jpg

    Everything else in the file, except buttons of smart shape with bearing States, is intact, as I can tell. What I am confused by, that's why/how each conditional action has been converted into a standard action. What I can see, everything inside the IF and ELSE statements have been purged and all under the Actions across all decisions have been combined together, as well as any action that refers to a variable being disconnected from the variable.

    Fortunately, I did a lot of work on the file so I can re - open and re-save the file CP8 again, but it's just a weird super bug.

    This is a bug known, already mentioned in this forum, just after the liberation. A patch is promised as soon as POSSIBLE to fix.

    Solution: do a little editing of the conditional action, so that you can use the update action button. When the backup actions are conditional. BTW, they are not converted to an advanced action level but to a shared standard action.

  • Button click slide 1st time, opens URL. Click on the 2nd time, URL opens and jumps to the next slide.

    Well, I'm really confused here!

    I have a project that is created where on a screen, I www.xxxx.com and I put a button transparent, so when someone clicks on it, it opens a new window and opens the URL.

    This works.

    Here's the question, when I got back to the project and click on the link for the SECOND time, it always opens a new window with the URL, but it ALSO moves to the next slide. Nuts!

    Can someone tell me what could happen? It's so weird!

    Here is a screenshot on the properties of the button and the blade in the bottom of the screen.

    Button Working Incorrectly Properties.PNG

    Button Working Incorrectly Options.PNG

    Hello

    A number of things here.

    First of all, I would never use a Transparent button. Try a Click Box.

    Second, when you added the URL there is also an option to 'continue the project to play. " You guarantee that was unchecked?

    See you soon... Rick

    Useful and practical links

    Captivate wish form/Bug report form

    Certified Adobe Captivate training

    SorcerStone blog

    Captivate eBooks

  • HTML file does not open

    Hello

    Have a weird problem today.

    We use RoboHelp 5 to work.

    I opened a project help today and when I tried to open an HTML file, be it in the project manager, TOC, right click on a file and clicking Edition, the file does not open. He can't see in WYSIWYG or real Code.

    I tried with several different aid project and had the same problem. My boss had the same problem after only a few years back and rebooted just to make it work. I tried, but it did not help.

    Yesterday, everything was fine.

    If you can help me with this, it's greatly appreciated!

    Thank you

    JP

    Hello

    Probably just to affect the default editor will not be cut. You should also make sure you change auto to use by default as shown below:

    See you soon... Rick

    Useful and practical links

    Wish to RoboHelp form/Bug report form

    Begin to learn RoboHelp HTML 7, 8 or 9 in the day!

    Adobe Certified RoboHelp HTML Training

    SorcerStone blog

    RoboHelp EBooks

Maybe you are looking for