Weird, NIC is not getting an IP address from the DHCP server, but when you set a static IP address of works...

Similar Questions

• Client DHCP is unable to get a valid IP address from the DHCP server.

  Client DHCP is unable to get a valid IP address from the DHCP server. I have a home edition of Windows XP attempts to connect to my router wirelessly with wireless or wired connection but I get an error in Event Viewer with the discription DHCP 1007 error message. From what I researched, I discovered that the DHCP service depends on the AFD, TCP/IP and NetBT services. All these services are correctly place and worked very well (even the DHCP service is running without error) but every time I try to release/renew my IP address I receive than DHCP warning in the case where the viewer and I just cannot get a valid IP address of the server (router) I also have one of these verizon wireless G3 usb adapters and it works fine. I also have a good ping back when I try to do a ping localhost (for the closure) I also tried the preinstallation of uninstalled drivers from the adapter/s and nothing works. The only entrees in the registry for DHCP error are also AFD, NetBT and TCP/IP nothing else there, also all the files in the/system32/drivers afd.sys netbt.sys and tcpip.sys in addition to solve the problem, I'll mention that I installed and reinstalled Northon earlier, I do not remember if the problem appears before or after that. I receive also any error or warning in the security log or at least I don't know how to read: P

  Thanks in advance

  Thanks for the information.

  I hope you know that it is risky to connect the laptop to the Internet with no firewall and no antivirus... If this laptop is already connected to the Internet in this State, he is perhaps already infected.

  You said you know the router works because the other computers can connect successfully to it.  You should check the configuration of the router to make sure that it is not configured to limit the number of IP address it supplies, and (b) it is not configured to filter users by MAC address.

  When this laptop is connected by Ethernet, even if he gets the IP address of 169.254.x.y, can you ping the router?  Find the IP address of the router on any computer connected to it by running the ipconfig command in a command prompt window.  The "default gateway" is the IP address of the router.  Run the ping command in the command prompt window as well.

  If the ping is successful, it is possible that you might be able to use an IP address in the correct range for an Ethernet cable (but I doubt that it works for the wireless).

  It is very difficult to cite anything in this forum.  If you click on the link "Reply citing", all of the message to which you are replying is quoted.  You can copy the citation and delete parts of it, but it is not very user friendly.

• VMware workstation 8 briged connection cannot get an ip address from the dhcp server

  Hello, I hope someone can help me with this problem, my virtual machines are unable to obtain an ip address from my dhcp server in windows server 2008R2.

  VMware workstation 8 is running in windows 7 proff. 64-bit OS. My gets physical computer an ip Server dhcp without problem have access to the internet and everything works fine, but my VMs for some reason any cannot obtain an ip address from the DHCP server.  I updated virtual nework Briged editor one of my physical network interface cards. Then I put my VM NIC to briged in for some reason my VMs are unable to obtain an ip address. The ips only I get are 169.254.43.129 Add 255.255.0.0. any help would be very happy. Thank you very much.

  FYI - you have posted some of the vmware.log

• Virtual machines do not get IP address from the DHCP server

  Hello! I just spend Xenserver to ESXi. Created a couple of virtual machines and none of them gets an IP address from our DHCP server (DHCP server is a physical PC), and instead, they get a number of internal 192.168.x.y allowing connection to the internet.

  Looks like a way to do this is to install a virtual machine that is a router, as M0n0wall, and route traffic to connect to the external network and finally to access internet. But this is not what I have to do.

  I need to have virtual machines that are server to get an IP reserved for our DHCP server, and then our local windows client should be able to access it directly.

  I searched on google and forums for this but I can't seem to find how to configure virtual machines to directly belong to our local network.

  I thought that VMware would have a simpler way to do so than XenServer, but I was stuck on this one day now and really frustrated as I get not before with this project, stuck on this little problem... sigh...

  Thanks for your help.

  GER.

  ESXi does not IP addresses to the virtual machines it host - if the virtual machines are not able to access your physical network than that of the thw two virtual machines acts as a DHCP server - now to the question of network - if you are not able to reach the virtual machines on the physical network or achieve fitness network virtual machines , then there is a problem with the physical connection to the ESXi host, possibly the configuration of the physical port that connects to the - is a way to test this theory to assign an IP address on the same network that the management port - if you are able to access the virtual machine, then you know that the problem is with the switch port.

• "Your computer could not renew its address from the network (from the DHCP server) for the network card"?

  I saw this question posted several times here, but I can't find someone who has exactly the same problem I have.

  This problem started a week ago. Basically, my computer loses its connection ethernet once per hour to around the same exact time. which is only for about 5 seconds, but it's enough to get Skype and other things while I'm working, and it's very frustrating because I use Skype to talk with customers, and it looks unprofessional when my calls fall every single time. my computer can also use wireless (which does not go down), but he's too unstable for my work.

  now on the error message I posted. I get this error in my observer of events in about 30 minutes until my ethernet goes down, so I don't know if they are interlaced or not, because I don't get any errors when my ethernet really crashes.

  Here's what I've tried so far without success:

  -temporarily disable the firewall and antivirus

  -updated driver for both my wired network cards and wireless (both were UTD)

  I don't know what to do because I've never had this problem before.

  Here is some information on my computer if that helps all:

  OS: windows 7 Home premium (x 64-bit)

  computer model: gateway DX4870

  Look on the side of the router and make sure that the DHCP lease time has not set to 60 minutes.  As a simple solution you can just assign a reserved DHCP or a static address to the computer (in the router).

  PS: You'll find the DHCP lease on the map with the command ipconfig/all command at a command prompt

  John

• Get "error 0 x 80070057: the parameter is Incorrect" when you try to edit the photo details

  I'm changing the date of the photo, and I get this error code, please help me as soon as possible.

  Hello

  The parameter is incorrect error indicates that the files are not accessible when you try to change them.

  Check if the problem continues in a new user account.

  Refer to this article for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• create a description of the interface if no ip address received from the dhcp server

  Hi Experts,

  I would like to create simple script revved my interface isn't getting an IP address, it will add the description of this interface. I tried writing but no luck. BTW, this is my first attempt of EEM. Thanks in advance...

  Event Manager applet change-address_2
  model event syslog "DHCP_Description."
  order cli action 001 'enable '.
  action 002 cli command "show int G0/0 | address Internet Inc. will be negotiated"
  football action 003 cli match $_cli_result
  action 004, «config t» cli command
  005 action, command cli "int g0/0".
  action 006 cli "description of the command NO IP ASSIGN"

  I built a task of laboratory for this kind of thing for CiscoLive.  In the laboratory, a static IP address is assigned to the interface, but it's easy to change to simply put a description.  The following policies:

  "event Manager environment q.
  Dhcp-intf-up applet event handler
  event syslog LINEPROTO.*GigabitEthernet0/0,.*changed state model up to
  order cli action 001 'enable '.
  action 002, «config t» cli command
  action 003 cli command "event manager applet dhcp-intf-timer."
  action 004 cli command 'event timer countdown 60 '.
  005 action, command cli "action 1.0 cli command enable."
  action 006 cli command "action 2.0 cli command $q config t$ q.
  action 007 cli command "action 3.0 $q interface cli command Gi0/0$ q.
  action 008 cli command "action 4.0 cli don't command $q description NO ATTRIBUTION of IP $q.
  action 010 cli command "action 6.0 cli don't command $q no event manager applet dhcp-intf-timer-disable$ q.
  action 011 cli command "action 7.0 cli don't command $q no event manager applet dhcp-intf-timer$ q.
  action 012 cli command "event manager applet dhcp-intf-timer-disable.
  action 013 cli command "syslog events model $q%DHCP-6-ADDRESS_ASSIGN:.*GigabitEthernet0/0 $q.
  action, command cli 014 'action 1.0 cli enable command '.
  action 015 cli command "action 2.0 cli command $q config t$ q.
  action 016 cli command "action 3.0 cli don't command $q no event manager applet dhcp-intf-timer$ q.
  action 017 cli command "action 4.0 cli don't command $q no event manager applet dhcp-intf-timer-disable$ q.
  action 018 cli command 'end '.

• TRENDnet wireless card will not get an IP from the DHCP server

  I recently installed a Trendnet TEW-423pi/a card in a HP Professional refurbed PC. I quite agree the firmware on the card is wobbly and no update is available. Before I chuck this map I was looking for other suggestions for troubleshooting. The card keeps defaulting to the automatic private ip address structure. I have updated the drivers and looked for updates to the firmware without success. The PC is under Win7 64 bit Business. I installed the device wireless in Trendnet without success. I even assigned a static ip address of one of the many ones open on my router. I tested a card wireless from another machine and it fine configuration.

  Hello Bilejuice,

  Thanks for posting your query in Microsoft Community Forum. However, the question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the TechNet Forums :

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Thank you.

• I get an error indicating that the "Virus scan failed" when you download Internet Explorer and Google Chrome.

  Original title: Virus Scan failed

  Cannot download anything with IE8 or Chrome.  Constantly get "Virus Scan impossible" or "" *. "" * "contained a virus and was deleted. »

  Changed the setting to the "browser.download.manager.scanWhenDone" in Firefox to "faslse" and I'll have no problem with him (using Norton 360 v. 20.3.1.22 on Windows Vista.

  Relative security of Windows, I've identified 5 other issues

  (1) cannot display "Windows Firewall settings."

  (2) cannot access "Windows defender" by any means

  (3) "Windows Security Center" is disabled and cannot be restarted.

  (4) do not see "Windows Defender" or "Windows Firewall" in services

  (5) could not find 'msascui.exe '.

  This suggests my protection Microsoft antiviruss files have been removed or disabled (possibly through the last installation of Norton.  My question, if this is true, why I get "Virus Scan failed" every time I try to download with IE 8, but not with Firefox?

  Thank you.

  Paul

  Hello

  "This suggests my protection Microsoft antiviruss files have been removed or disabled."

  Do you have MSE installed or you are using any other other than Norton 360 AV?

  If so, uninstall it, you must have AN AV installed.

  With the Windows Firewall settings, Norton 360 uses its OWN firewall.

  http://KB.Linksys.com/Linksys/GetArticle.aspx?docid=5611fc67a247495bbdcef8b9d4018842_Norton_360_Firewall_Configuration.XML

  You should not have more than one firewall running.

  Choose Windows or norton, NOT both.

  Read about Defender:

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  For any other problem with Norton, contact the Norton Support or ask in their Forums.

  https://support.Norton.com/SP/en/us/home/current/info

  Norton community:

  http://community.Norton.com/

  See you soon.

• Just bought the CC and can not download LR.  I downloaded the application manager but when I go to select LR he wants me to pay again? Help I'm not too savvy, computer just bought CC and can not download LR.  I downloaded the application manager but when

  Any help is appreciated

  Lightroom CC 2015 requires MAC OS 10.8. In this case, you are only able to install version 5 of Lightroom.

  You can install the trial and activation barriers check your hosts file as explained by Brucgovn.

  More info on this doc:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

• Get a strange IPv4 address of the DHCP server

  Hi all

  As title, I got a strange IP - DHCP server 169.254.XXX.XXX.

  I used Wireshark, tried to get the bootp packets.  I found that my laptop 169.254.xxx.xxx used as source address to send DHCP Discover.

  In addition, there is an option called content with 169.254.xxx.xxx requested ip address. Like my source address.

  I couldn't access the Internet with this IP address.

  I was wondering, is that it is a normal behavior for windows 7 to use 169.254.xxx.xxx to send DHCP Discover?

  A DHCP request is sent through the universal 255.255.255.255 broadcast address which is one of the addresses that a server is listening. The query includes the MAC address of the applicant unit because at this point, it doesn't have an IP address. The DHCP server responds to the MAC address in order to assign the address.

  In your case, the range 169.254 is called the APIPA address and the PC actually assigns to himself because he did not see a response from the DHCP server. As you refer to Wireshark having a reading of the present.

  http://wiki.Wireshark.org/APIPA

  The customer may not send the request via this address and get a response because the DHCP server is not listening on the address or by using the range. The answer must be done via the Mac.

• When you set the IP address of the router, WRT160N Inaccessible

  Hello

  I bought a WRT160N router yesterday and eagerly tried to connect my laptop to the internet (ADSL) modem using this router. As my ADSL modem is a router DHCP too, and I want to keep it like that, I have it plugged in ethernet cable form one of my ADSL modem/router, LAN ports in one of the LAN ports on the modem, Linksys have the Linksys operating as a bridge. However when I tried to specify an address of router static IP (192.168.1.254) in the basic parameters of configuration Linksys Panel, disabled the DHCP setting and saved, I could not connect to the router more using this new IP address - my browser tells me that the Web page doesn't seem to exist, but it cannot establish a connection with her. Then I have to reset the router in order to access configuration panels using the default address 192.168.1.1. Is there a reason why I cannot access the control panels of the router with the new IP address of the router that I've specified?

  Thanks for any help,

  Hello

  the problem is resolved, be it in a different way. I tried your trick to wait 30 seconds after the registration and the recycling of the modem, but this had no effect. What helped does not change the settings for address IP Routerl and the setting from the DHCP server on the router for the disabled at the same time. If I only changed the setting to the IP address of the router and recorded, the modem has been reset automatically and starts with the new correct router address. After that I changed the setting of DHCP server to the WRTN160 to off and then I was able to get the router working, like I wanted.

  I assume that when you connect the router to a computer reset (after taking out the IP address of the computer) with DHCP from the active router, the router assigns an IP address to the computer that somehow interferes with the local IP address parameter, if you define that at the same time.

  In any case, all work now, and I have excellent signal everywhere in the House. I guess that congratulations go to me :-) but still thanks to eliminate one possible cause of the problem

  Kind regards

  Gerard

• Problem with the DHCP server IP address

  Hello

  a new installation of LAN, two VSS pair core 6509, 15 closets, with piles of 3750. Floor 15 only, host devices can ping the DHCP server, but cannot acquire IP addresses. not this problem on other floors?

  PortFast a dother settings are intact.

  your thoughts with be appreciated.

  Massoud

  Are the trunks will switches closets for the vlan, the DHCP server is in?

  Sent by Cisco Support technique iPhone App

• The key enter will not allow the address typed in the address bar of loading. You enter in a speech, but when you press the entry bar that nothing happens.

  There is no way to enter web addresses and then go to them. You can type an address in the bar address, but when you press on enter, nothing happens... It's as if the button enter is broken... I have no problem with Explorer or Chrome... Firefox worked very right up until a few weeks ago... I can't think of any change to this question... I just uninstall Firefox and reinstalled the latest version to have the same problems...

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted. Cannot synchroni

  due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted on the USB port. Cannot synchronize.

  Hello, manoj0910.

  Please visit Apple support communities.

  Looks like you can't synchronize the pictures located on your external drive.  I need a little more information about your configuration to provide a better answer.  However, we will try to sync your photos through the section of the file through the article below.  You just need to direct iTunes to where your photos are stored on your external drive.

  If your photos are in a folder

  1. Select "Choose a folder" from the context menu.
  2. Choose the folder where you store your photos.
     
  3. Click on apply.

  You can arrange photos in subfolders to create photo albums.

  Sync photos from your computer to your device iOS through iTunes

  See you soon