Weird problem dual monitor with change of colors in the image

Similar Questions

• can I know the reason for the change of color in the image - canon EOS rebel T5

  Hi, I am using canon EOS rebel T5... Recently whenver I clicked on an image using this device, I get color variation in the image that I've highlighted in the image below... It's because of the lens or the camera settings... Pls help me to get a clear picture

  

  What are compression of camera settings, for example, I use fat with Fine quality

  This 478KO scares me, it's really small for a 4000 x 2000 image. You use too much jpeg compression which is ruining the image. You need to set a level of quality JPEG 9 or 10 - it will result in larger images, but as you can see, throw the data has detracted from your images.

  If you want to send pictures, decide first the smaller number of pixels you can hang out with and then use just enough of JPEG compression to get the size you want.

• Weird problem dual monitor

  OK, so I've browsed the forum and didn't see anyone post with a similar problem.

  I have a T61 with Nvidia Quadro 140 M hooked up to an advanced cradle.  I am running dual widescreen 19 inches, with a KVM switch to switch in between my laptop and desktop.  My office works very well with both monitors defined that 1440 x 900, but for some reason when I move to my laptop, she has a (vga) on 1440 x 900 and the max resolution for the other monitor (connected via DVI) will go no higher than 1024 x 768.

  I tried a lot of different things, reinstalled the monitor several times, all kinds of different settings in the nvidia Control Panel and display settings, but I can't find a way to get the second monitor at 1440 x 900.

  I know the monitor works because it worked previously and still works with my out of office for 2 screens of 1440 x 900.  I can't understand how to solve this problem, and it's really annoying me.  I'm using the latest drivers from nvidia.

  
  

• Change the colors of the images between monitors while the user interface remains the same

  Hey! Im having a problem where photoshop change colors when I move the window between my monitors, see here: http://sta.sh/04y5s60vf3j is not due to the monitors themselves being different, it does actually change after a few seconds to move inbetween the monitors. The left was callibrated with an elite group of spyder 3 I do not have access to. I applied the file with windows instead of the utility of spyder color management. The second is new, and it is not callibrated by what that is, but instead was done by hand with integrated RGB brightness/contrast/custom settings. Two of them are very close to eachother, so enough for my taste. but when photoshop changes which looks like the image, it is causing problems. Curiously, when I disable calibration of the screen on the left, the image doesn't change color between monitors, but instead always appears as it does on the right. but then they do not match to the top and all the screen looked washed out because it's uncallibrated, so that won't do me any good. Something else interesting to report, is when this image is saved as a. JPG and read with firefox, the image appears exactly as the monitor on the LEFT (which is my primary monitor) despite the monitor left which is the force has changed. does anyone have any suggestions? It also appears that photoviewer windows behaves in the same way, although firefox does not work. Meaning when I open an image in all 3 on the left monitor, they look alike, but when opened on the right monitor, windows photo viewer and photoshop both display the image such as the brighter and redder that firefox works. It's frustrating, because it seems that photoshop changes the image with my measured on my monitor left to match what it looks like on the web, it does. but it does not for the monitor right, or the left is uncallibrated. Another question, I can see with this is even if the user interface is the same shade of gray, the images are different between the monitors because of this change. Does anyone have suggestions?

  -BD

  What you need to understand, is that Photoshop converts the image data, the document profile for the display profile, independently for each display. It is a managed pipeline standard color display. Windows Photo Viewer does the same thing (but do not have a lot of other applications).

  When you move a picture on the screens, it snaps when you drop; as the new display profile is picked up.

  Calibration is only partly about changing the monitor's response. The second part a profile, which is a complete description of the screen in its calibrated State. Then a conversion of standard profile is performed as he goes to the screen. The profile has a much higher level of accuracy than the single calibration.

  ---

  If the image on the web has the stripped document profile, Firefox with default settings does not have this conversion and sends just the unchanged data to display. In other words, it is not color managed. This behavior can be changed, but get your first straight base display profiles. Unless you get a new calibrator it is no that you can do to match these two views.

• Do I need a dedicated video card to run a Setup dual monitor with HP 700-327c?

  Recently replaced an old HP Desktop with the envy of 700 running Windows 7 Professional.

  Old facility had a Setup to dual monitor with a video card that had two monitors - one HDMI and a DVI connectors.  The standard connectors on the old PC were VGA and DVI, but both have been capped to prevent use.

  I wanted to set up monitors on this new PC to do the same thing and wanted to know if a video card with the two input connectors dedicated was the best set-up or simply use a mute adapter for VGA or DVI on the new PC ports.  The new PC has two video connectors standard - one VGA and one DVI currently.

  FYI: Using an Intel i7-4770 with 16 GB of RAM and a video card using an Intel HD Graphics 4600.

  An update as promised - not a problem - used another cord with the right connector and setting up monitors using Windows device settings and they work perfectly.  No need for a separate or higher video card as I am not in the game application for video features.  Thanks BH.

• I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

  I love the develop module, but I'm doing something wrong in the library

  In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

  And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

  Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

• How to change each color of the illustrator vector object in 2013 of PowerPoint?

  When my client want different colors on vector graphical objects in PowerPoint.

  For example, I created graphics in Adobe Illustrator CS6 element, and then save as .emf file with color RGB, once exported mode then I insert the image from that file in PowerPoint 2013, after that I used separate both times. When I click on the different color theme, but it has not changed color.

  See video screenshot: 2015-10-03_1414 - fatech library

  I'm trying to understand how to change each color of the illustrator vector object in 2013 of PowerPoint? Please help me!

  Thank you

  FATECH wrote:

  But I want other options...

  There is no all.

  Illustrator and MS-Office share not all the graphics features of construction at the file level. There is no universal edit-ability between the two.

  .. which is the best export (eps, emf, or svg), then insert a vector file into PowerPoint?

  If your Illustrator illustration is vector of 100% and contains no live effects, complex gradients, blends, etc., the first thing to try is copy > paste special > enhanced metafile.

  Otherwise, SPE may work, or you can use the pixelation in PNG. Personally, I do not consider export raster format Illustrator to be a stable workflow method, so I'd be inclined to use Photoshop as an intermediate step: Illustrator > Save As PDF > open in Photoshop > save in PNG. Just my preference.

• There is a major change of color in my image work the jpeg in photoshop to dreamweaver - it becomes ' g

  There is a major change of color in my image into dreamweaver - photoshop jpeg work, he gets 'greyed out', loses the color contrast. I checked in the bridge and the color settings are synchronized. Image in photoshop is like what I get from my Nikon D90 DSLR. The image in gray was also noted by two of my co. professional printer which I use, but one of my printers - modern postcard - images in photoshop are perfect. I just need to know what are the causes of the change of color and how it, thank you, Kathyrn control/manage

  I have noted changes in color as well and came to a few comments.

  When you make one. JPG file and you try to make a color in the file indicate the same color as the background of your Web site, you will get a lot of failures. Photoshop will add color information in an ICC file in the metadata information in the file if you wish. That tends to produce real colors, but they do not correspond to a range of web.

  The way I usually deal with images that are in need of high quality, is that I use the save for Web and other devices exclusively, either delayed or disable ICC profile for JPEG files and working with what works best. Save a JPEG file with lots of information as possible is usually the best choice but, as JPEG is a compression method 'frozen', you will always get some questions.

  In addition, the web browser in question will have control over what is displayed as well.

  So try to play with the ICC profile in record Photoshop for the Web and other devices and see if you can't get things a bit more reliable.

• After the change of color of the video automatically from the effects?

  Hi all!

  I use Adobe first and sequelae. Unfortunately I do not have the link to get programs working together, again. So for now, I have to return something first, before I can use it in sequels. But after setting up and make a clip in the aftermath, it's almost like the program itself has changed the color of the image? Is it simply the loss of quality, am I to ruin or am I missing something obvious?

  This is quite annoying, because there is a significant difference. The top one is the raw, less file is after rendering to legacy.

  http://imgur.com/a/MJ1y6

  filipb35067879 wrote:

  So for now, I have to return something first, before I can use it in sequels.

  You have certainly not to do. In After Effects, instead of import, choose Import Premiere Pro sequence.

• Photoshop CS5 and CS6, I can't change a color in the color picker. I can get white, black or grey but not color. Help!

  Photoshop CS5 and CS6, I can't change a color in the color picker. I can get white, black and grey, nothing else!

  Help!

  Is your picture > grayscale mode? Try to RGB

• How to set up a second monitor with a different view than the one on my laptop? [was: ron]

  I'm trying to set up a second monitor with a different view than the one on my laptop.  I have a HP Pavilion dv5 laptop and a secondary monitor View Sonic UP2365-LED.  They are connected with a cable 15 pin... my only choice on the laptop.  When I select the second monitor, it displays a box of a second on my laptop and the secondary monitor.  My pointer moves on both screens at the same time, no matter what display, I select the monitor 2.

  It depends on the whther the laptop can support both points of view.

  Somewhere with the right button on the desktop, choose "screen resolution" and that there should be only a drop down menu entitled "multiple displays".  Looks like you have "displays a duplicate" choose (if it will leave you) "to extend these screens.

• "Unable to save changes to permissions on the Image File Execution Options.

  Updating to Acrobat Reader, 1406 error reported; Cannot write the registry...

  Later, I found that updates for Office 2010 are starting to fail, some are bleow;

  Update of security for Microsoft Office 2010 (KB2553353) 32 - Bit Edition

  Update of security for Microsoft PowerPoint 2010 (KB2553185) 32 - Bit Edition

  Update of security for Microsoft Visio 2010 (KB2553374) 32 - Bit Edition

  After having read and carried out the instructions in the article by Acrobat; http://kb2.Adobe.com/CPS/329/329137.html#main_Vista and Win 7, has not solved the problem.

  Using Regedit, I found that I couldn't change permissions to one of the inputs of the sub in the execution for the Image File Option.  The error message "unable to save changes to permissions on the Image File Execution Options.

  Even in Safe Mode with administrator privileges, the message is the same.

  Have surfed the net for the solution, but none.

  Would appreciate advice.

  Concerning

  Prabir Mittra

  Malaysia

  Hello

  If the steps described in the adobe article cannot be implemented because of the error, then you need to contact adobe for assistance because they would be able to guide better.

  Also I suggest connect you to the computer as an administrator and check whether you can perform the steps completely mentioned in article from adobe.

  If you need assistance regarding the office updates, look for error messages related to updates Office failed in the history of Windows update and post it back here.

  Cordially.

• Adjustment brush - choose the color of the image?

  Is there a secret way to select a color in the image for use with the adjustment of the color of the adjustment brush?

  Lightroom apparently allows this, but I don't get to work with the cab.

  Camera Raw supports selecting a color in the image, and some members of the engineering team indicated that Lightroom, being able to do it is a bug.

• How to do an image have several clickable camp arrives with a box next to the image with a text. as I click on a bone in an image a box comes up next to the image with which are the OS.

  How to do an image have several clickable camp arrives with a box next to the image with a text. as I click on a bone in an image a box comes up next to the image with which are the OS. I have cs6

  This article has very clear steps & description of what you're trying to accomplish:

  http://Demosthenes.info/blog/537/enhancing-Imagemaps-with-CSS3-popups#wheelset

• HP Pavilion a6750f: problem dual monitor (Second monitor not detected in DVI input)

  Hello everyone, I'm going to by a problem of not being able to setp toward the top of my second monitor.

  I own a HP Pavilion a6750f with an ATI Radeon HD 3200 card on board running on Windows 7 Ultimate 64 bit operating system.  In the back, I have two VGA and DVI inputs, VGA works, but when I connect the other monitor which is connected to a DVI adapter on the back, Windows does not detect any.

  I tried to go the DVI adapter to the other monitor and noticed that it refuses to work. I will note that my display drivers are all updated and I activated the option of customization to detect the second monitor, nothing shows up, it will not be the same acknolowdge that there are several screens.

  I think it's weird that I don't see this problem being issued when I was searching for a resolution on google for hours now. If someone can help me here please I would be very happy.

  Just to remind you try to connect a VGA (analog) monitor to a DVI - D (digital only) output on the computer. This is never going to work as analog and digital are two completely different incompatible signalling methods. With the help of an adapter DVI / VGA passive is the problem that these cards may work with DVI - I or DVI - A output... not DVI - D.

  Wikipedia - DVI;

  "More digital, the DVI connector includes pins that carry an analog signal compatible with RGBHV signals in a VGA connector. This allows a VGA monitor be connected to a passive adapter and offers a universal solution for the DVI interface. The analog pins are the four that surround the apartment or cross the blade as shown on the right side of the diagrams below. »

  

  8 analog vertical sync

  C1 - analog Red
  C2 - analog Green
  C3 - blue analog
  C4 - analog horizontal sync
  C5 - analog ground

  Note the absence of the pins on your computer and your so-called card C1, C2, C3 and C4. Without these pins is not just going to work. Still, there is no way to get an analog VGA monitor to work with your digital DVI - D only output using a so-called DVI - D to VGA. You may be able to buy an asset DVI - D to VGA Converter, but this will be expensive and cannot provide a poor video image quality.

  As you said, the HP f1703 monitor supports only VGA. However, based on the specifications, your HP w2207h 22 inch LCD monitor supports the entry to a VGA and a HDMI input. HDMI and DVI - D share the same signage and using a HDMI-DVI cable or adapter HDMI-DVI and HDMI Cable will solve your problem. For two monitors running on your computer, please connect as follows:

  Computer > HDMI-DVI cable or adapter HDMI-DVI and HDMI Cable > HP w2207h monitor

  Computer > VGA cable > HP f1703 monitor

  Please send Bravo