Weird problems with Satellite A130

Similar Questions

• Quick BIOS problem with Satellite C875-10 t

  Hello
  I'm having a problem with Satellite C875-10 t my sister
  Thought it might be useful to enable the setting "fast bios.
  and this occuered be the worst idea to have!
  I am more able to again access the BIOS,
  Despite my cd penalty that no longer starts, I'll have to try it on another Pc to make sure that the cd is ok...

  Anyway, the computer runs windows8 and Toshiba hardware parameters that I downloaded does not (and was not done to w8 but seven times in fact... :/)

  I really need some help here and would really appreciate that someone of the Toshiba team would give me help on this!

  Thanks to you all!

  You can change it to normal mode again.
  Open the Toshiba system settings > BOOT > boot speed and change it to normal.
  Please do so and let us know if everything is OK again.

• Weird problem with the google search on Safari 9.0.2

  Hi all

  I had a weird problem with Google on Safari recently. After that the search for something from the Google home page and search page is loaded, I can't be able to change or enter anything in the more the google search bar. I have to reload the page every time google to search something else. Google search worked fine on Firefox though.

  I use the latest version of Safari (9.0.2) and I tried clears all history data, and Web site, but nothing has worked so far. My Mac is running on OS X Yosemite so what counts.

  Can someone understand what is the problem?

  Thank you.

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  In addition, a restart may help.

• Weird problem with enums

  Hi all

  I have a weird problem with the implementation of controls and access their values. It seems that EI is pulling the wrong values for me.

  
  As follows:

  I have

  enum { }

  SKELETON_INPUT = 0,

  SKELETON_GAIN,

  SKELETON_COLOR,

  SKELETON_DELAY,

  SKELETON_POSITION_X,

  SKELETON_POSITION_Y,

  SKELETON_NUM_PARAMS

  };

  and

  enum { }

  GAIN_DISK_ID = 1,

  COLOR_DISK_ID,

  DELAY_DISK_ID,

  POSITION_X_DISK_ID,

  POSITION_Y_DISK_ID,

  };

  And I create my fine controls like sliders and they appear

  However, in my method of rendering, the values that AE comes out is wrong.

  Suites. ANSICallbacksSuite1 ()->sprintf(out_data->return_msg, "X = %1.2f Y =%1.2f ',)

  params [SKELETON_POSITION_X]->u. fs_d. value,

  params [SKELETON_POSITION_Y]->u. fs_d. value );

  
  

  Instead of getting the values of Position X and Y in the effect control, I'm SKELETON_GAIN for X and NAN values for Y.

  
  

  Is that all that I forgot to put? AE not to complaint of the any mismatch of parameter.
  

  DOH

  This is one of those who come to you once you have posted.

  So the order of creation is too important.

  Initially, I wanted to put my POSITION_X controls and Y in the first place and thought he would keep the enum attributed honest.

  But apparently I need my order of creation is the same as the enum values.

• having a weird problem with my assignment after incorporation of java

  Hello
  
  I have a weird problem with my assign activity, I use a Java Embedding wherin I access a variable and assign it some data, further in the next step when I try to assign data to the same variable affecting the activity I get an error message as below.
  
  
  com.oracle.bpel.client.BPELFault: faultName: parts of {{http://schemas.xmlsoap.org/ws/2003/03/business-process/} selectionFailure}: {{summary = not valid for the type of part.}} When you perform the operation of the entitlement, the node THIS, IS, TEST is invalid. The node named in the error message was either null, or a node-set is empty, and it was not an instance of org.w3c.Element. Check the value of the node to the line number 795 is not null and is an instance of org.w3c.Element. } .
  
  I am using soa 11.1.1.5
  
  Can someone please help?
  
  -Thank you
  Shirish

  Shirish,

  This is a bug and you will need to apply a patch for it.
  You can find explanations in Oracle Support Id ID 1194228.1.

  Arik

• Weird problem with headphones Jack Bootcamp

  I searched many forums / tried many things before coming here, but for some reason - probably for the first time I don't see my problem on Google.

  The question:

  Every time I put in the helmet, they show only disconnected in Windows on Mac OS X 10 with Cirrus pilots. Sound continues to play on the speakers. This problem wasn't there yesterday and randomly began today.

  Results:

  1. it is not a hardware problem: headset works perfectly on Mac.

  2. it is probably not a Windows problem: when I install Windows drivers by default, the headphones ARE recognzied (!) (this I do by uninstalling Cirrus and restart the Mac). Of course the audio does not play not (or through speakers or headphones) because these drivers are not used to a Macbook Pro.

  3. drivers are not exceeded - just downloaded software support of Bootcamp and re-installed windows.

  Conclusion:

  It is most likely a problem with the driver for Cirrus, which is weird, because I assume that there is already a forum about this if there is (although someone should be the first I guess).

  I have no idea what to do - Apple support cannot help, Cirrus doesn't have a lot of support and it is not a problem with Microsoft (I guess), the only solution I can think of is to find another driver, which I can't find.

  If anyone has a solution or even a certain direction to a solution as possible, it will be very useful!

  Found the problem: Windows does not recognize the headphones with 1 side does not, no wonder there is no one else with this problem lol.

• Problems with Satellite L755D-13V after reinstallation of Windows 7

  Hi all!

  I really need a support here. Im a kind a noob about PCs ;)

  I reinstalled Windows 7 on my Satellite L755D-13V (64-bit). After that, I have some problems with some drivers.

  (1) first of all SM Bus controller driver-free and I cannt find it on internet. I tried the "Hardware Setup" from toshiba support page. Had no results.

  (2) the VGA Graphics standard is listed twice, a gives a yellow "!" He says: "could not start (Code 10)". The drivers are up to date.

  (3) the wifi does not work. All the drivers are up to date but I cannt find a netzwork.

  Is 2) and 3) due to 1)?

  Please help me!

  hortab

  System:
  Windows 7 (64-bit)
  Satellite L755D-13V

  Thank you for a short return.

• Strange sound problem with Satellite L740 TV outputs

  I'm having a strange problem here... I googled this several times already, and I only found the same solution mentioned several times and the given solution * not * work is to me.

  I have a Toshiba Satellite L740 running Windows 7 Home Edition Premium, with a 64-bit Intel Core i5 - 2410M @ 2.30 GHz CPU and 4 GB of physical RAM. My problem is the following...

  There are two different TVs in my house that I regularly connect my laptop via HDMI cable.
  The first is mine, and I can get sound through the TV very well when I plug it in.

  Sometimes, however, I will disconnect the computer from my TV and not get any sound through the laptop because he's trying to output to external speakers to TV.

  More importantly, when I connect my laptop to my * roommate * TV (the same make as mine, you mind), I can not all the sounds of his TV at all.

  This is a recent problem. Until this morning, I was able to get noise from two TV very well and only sometimes had problems with sound through the laptop itself, which has been easily resolved by restarting.

  It's just a hunch, but it's almost like * doesn't realize that there are two different TVs * that it is connected to my computer. Maybe it's stupid, I don't know, but be it, it's frustrating...

  * ALSO: * I've seen dozens of suggestions that I put my HDMI audio as default device. Yes, I did. It wasn't the issue. Is the same to activate my audio drivers in Device Manager. They are all turned on, so it's not that either. Any ideas?

  It's a bit strange if you connect the laptop to two identical televisions and use the same HDMI cable to the TV.

  Unfortunately, it all works automatically and I put t know if you can force your laptop to recognize two TVs on the same path.

  In the worst case you have to do it manually in the sound properties > playback devices.
  If it works with four mouse clicks you can change.

  I tested my laptop with two different TVs.
  At home, I have a Toshiba TV and at the office we use Sony. On both automatically get sound on the TV speakers.

  If you will be able to find the solution please let us know.

• Temporary solution to load problem with Satellite C650

  I here provide a temporary solution to loading with Satellite C650 problem, which I have faced.

  First of all, I've updated my BIOS. After that, I removed the battery and plugged AC for 2-3 minutes.

  Then replace the battery and it loaded.

  However, the battery got charged up to 99% only and after that the interrupted load and the load remained at 99% and renewed battery indicating "plugged in, not charging."

  Therefore, each time I hv to repeat the procedure above to charge my battery.

  If any1 has the solution to the prob. above, it would be gr8 to hear.

  Thank you very much!

  Thanks for your posting.
  To be honest I really don t know what else you can expect and test it with new battery.

  I think that your laptop model must always have a warranty valid, right?
  If so, contact Toshiba nearest service provider and ask for replacement.

• Problems with Satellite A300 - 1GC XP install - CD does not?

  Hello

  I have a few looks to round in various forums and found no answer to everything.

  I have the Satellite A300-1GC and had (from last night) vista on it. As caused Vista
  a lot of problems with different programs, I decided to get rid of him.

  The problem is now--if I stick my XP installation CD it it bed "press any key to boot from CD".
  Do that and then nothing happens. The CD read head stops going back and forward
  but nothing happens at all. Not even the beginning of the blue installation screen.

  Any ideas where this comes from?

  The CD-rom can also be run in AHCI mode (can a CD player what do I do?) and requires drivers?
  I have tried various CD XP - neither work. The last one I had was with SP3 and build in February 2009 so quite recent.

  Clues?

  See you soon
  Tobimaster

  Hello

  In your case the question has nothing to do with the SATA mode (AHCI mode or Compatible) but it looks like the CD/DVD drive cannot handle the Win XP disc
  Why? Who knows

  Always is it that the CD cannot be read and so the installation can not get.

  Try to copy this disc by using another computer and then you can try using the disc copied on order to install Win XP.

  Just FYI: I use TDK (CD and DVD) r discs... I am very satisfied

• Several problems with Satellite A100

  Hello

  I was wondering if someone could point me in the right direction with regard to the fixing of my computer!

  I have supply problems with my Satellite A100 laptop that I bought in europe 2 years ago. When the battery is run-down completely the computer will not run / start at all when it is plugged into the wall. It shows a light indicating that the battery is in charge even the domain controller in the light does not appear. The laptop must load for at least 1-2 hours before I can activate it. Push the power button to the computer also turn on / off the light sometimes. I can't use the computer at all until the same fully charged battery if light shows it is plugged into the wall. The outlet is fine.

  I also have other issues. First of all the computer not as to the rename files - often said that they are used, but they are not. Secondly, I have problems with toshiba recordnow cd / dvd burning program. I can open the program, but when I close it will not open until I have sign out and then sign back in. Thirdly, my computer love is no longer my sony digital camera memory cards if put directlt in laptop - it is said that they can be dangerous and will not access.

  Thanks for reading!
  Shona

  PS my laptop does not at all depend on when the battery is removed and the laptop plugged into the wall.

  PPS. my laptop model is Satellite A100 - 163, PSAA9E model number

  Hello

  regarding your power problem:

  It seems that your motherboard is faulty. I had the same issue with an A100 and after replacing the motherboard, the problem has been resolved. They told me it was a kind of resistance or something as preventing the machine from power.

  The question of the name change is only registry related since the registry controls the access to the system. So you log on with an administrator account or with a regular account that was created for do not connect as an administrator of the computer?

  If not please google for "cannot rename files" that gives results much more then ask someone here. The registry could also be a cause for the issuance of recordnow!

  I Don t think that the card of your digital camera and your pc Don t like. Installed antivirus software? This might also be the reason.

  In your case, I suggest to bring your machine to an ASP (authorized service provider) and allow them to perform some checkup and proofreading materials.
  Back up your important data, and then perform a full restore of your machine (can be done with the recovery media supplied).

  See you soon

• Problem with Satellite A300 and Vista 64 bit

  I just bought a Toshiba Satellite A300-1CO model: PSAJ4E-03R015PT, which came with an impressive 4 GB of ram device.
  I knew with Vista 32-bit, only 3 GB would be available, but since I got a license of Vista 64 bit I care, came home and installed it.
  When I looked up the drivers on the toshiba site, no drivers for Vista 64 bit drivers were available!
  I have now 4 GB or RAM available and I also have problems with face recognition software, microfone, sound card, card reader and a few other things.

  I searched the websites manufactors drivers and I managed to get some of these things barely usable, I don't think that it is a SD solution.
  Other laptop brands are made available long drivers for vista 64 bit some of them even for XP 64 bit!

  I would like to know how long take to Toshiba do official drivers available for vista 64 bit on their Web site.

  Best regards, Pedro P.

  I was looking for 64-bit drivers for my laptop, but since this is a new model, the drivers were not yet available. I checked a few weeks later and they were no longer available.

  Just wait awhile, they should be available soon.

• Weird problem with incorrect color printing

  Hello

  IM facing a weird problem in software hp deskjet 1050.my printer printer all-in-one j410 has 5 modes i.e. normal quality printing, fast draft, simple better paper, Photo paper mode quality best quality & specialty paper better quality.

  When I put take-away color printed a photo in "quality mode best photo paper or specialty paper best quality mode ' on any type of paper, the output is pinkish or bluish.

  Please note im using black and non-rempli, true hp original cartridge 802 tricolor.

  to make things clear, im attaching a scanned photo of my printed paper that have the same images with original print quality modes.

  

  as you can see in the scanned picture, that we have the fast draft quality to the best quality of photo paper, the blueishness rose.

  Pls help me :-(

  -----------------------------------------

  My Info

  OS: windows 8 pro

  Printers: Hp deskjet 1050 j410

  Hello

  This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

  http://support.HP.com/us-en/document/c04190374

  Good luck!

• Weird problem with shared resources in Windows XP

  Hello

  I have the odd problem with 2 machines WinXPSP2. I can manage and see their actions of any another machine machine in the field. But when I try to navigate machine B for his actions or machine has the manage, that's impossible! and what makes it more weird is that I can ping machine B machine A. OK, the problem is that I need to use a shared printer on the computer B to machine A and I can't simply. Can someone help me solve this problem?

  Thank you

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winserverGP/threads

  Hope this information is useful.

• x 360 u100ng envy 15: weird problems with adapter Atheros QCA Qualcomm 9565 being unstable when it's on battery

  Hello

  I have a weird problem.

  When the notebook is on battery, the (Qualcomm Atheros QCA 9565) wireless card is unstable and very little reliable, dropping signals continuously, more importantly, loading speed (be em, Web sites, or a set of the router to the top of page!) is considerably slowed down...

  Remarkably, I can detect this by loading the page of my router configuration, when the laptop is on current alternative, I can refresh the page of the extremely fast router, but when the laptop is on battery, blocking of page of the router, so all the other websites, I try to load, the router page has nothing to do with an internet connection It reflects the quality of connection directly between the wireless card and the router and the router is in excellent condition, as evidenced by all the other devices on it.

  I also notice that when the laptop is on battery, the screen fades and informed on a regular basis, I do not think that my laptop is equipped with auto brightness adjustment features...

  So far, it seems that the problem is the battery... If the wireless adapter can run reliably with a reliable source of energy (i.e. the AC power), the wireless card is fine, right? It seems to me the battery is faulty and cannot provide enough power for the wireless card and other devices, from the ravages of this pain in the ass... computer I'm right?

  Thank you very much for your contribution in advance!

  Cong

  For the wireless adapter, check your settings under Advanced settings, Power Options. The map is set up for maximum performance on battery & power?