Weird question on which the machine virtual ESX 3.5i

Similar Questions

• "the machine virtual source is not recognized" using VMWare Converter stand-alone 4.01

  All,

  Shadow protect IT edition allows us to create backups of image files from our servers. We need the ability to convert files Shadow protect (SPF) in VMWare Server 2.x. files about half of our servers do not convert. We get a message that says: "the machine virtual source is not recognized. What gives? I know image backups are fine because I tested.

  Any help would be appreciated.

  Thank you.

  vmnoob

  We support only a few specific versions of ShadowProtect.

  > StorageCraft ShadowProtect 2.0, 2.5, 3.0, 3.1 and 3.2

  There may be additional restrictions when you attempt to use these types of files, such as the following from the Manual:

  1. dynamic disks are not supported.

  2. all the images in the backup of a machine must be in a single folder, without other images placed there.

  3. for incremental images, so 16 incremental backups are supported.

  4. images of systems with logical drives are not supported if the logical drive is also a system or an active volume

  5. for volume-based cloning, all volumes on the disk until the active devices and the system must be saved.

  5.1 for example, if a drive has four partitions, 1 to 4, with the partition as the active volume 2 and partition 3 as long as the system volume, the backup must include 1 to 3 partitions. (ShadowProtect only).

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Cannot install the machine virtual linux 2 TB in size in esxi 5.5

  Cannot install the machine virtual linux 2 TB in size in esxi 5.5

  VM will be restarting inbetween fixing and explains the operating system not found.

  Please help me on this

  Thank you

  Anand

  What Linux distro are you trying to install?

• Cannot start area Planner and the server process in the machine virtual App/lot

  Hello
  
  After the change of /etc/tnsnames.ora in the machine virtual App/Batch:
  
  [Psadm2@psovmab LOG] $ /etc/tnsnames.ora more
  H91TMPLT =
  (DESCRIPTION =
  (ADDRESS_LIST =
  ((ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.133) (PORT = 1521)))
  (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = H91TMPLT.corp.peoplesoft.com))
  )
  
  I can't start Task Scheduler field and the server process:
  
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 197 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 198 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  

  INFO: Oracle Tuxedo, 10.3.0.0, 64-bit Version, Patch level (none)

  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 793 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec BBL - one:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 773 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message TMADMIN_CAT, the value 1, num 495 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  

  Try to start...

  INFO: Oracle Tuxedo, 10.3.0.0, 64-bit Version, Patch level (none)
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 801 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSWATCHSRV o ./LOGS/stdout e ./LOGS/stderr - A - ID - 55021 d APPDOM s PSWATCHSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSAPPSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSAPPSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSAPPSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSAPPSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSQRYSRV o EI ./LOGS/stdout. /LOGS/ [email protected] d s PSQRYSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSAMSRV o ./LOGS/stdout e ./LOGS/stderr - A - APPDOM d s PSSAMSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSBRKHND o EI ./LOGS/stderr s PSBRKHND_dflt:BrkProcess - APPDOM d s PSBRKHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSBRKDSP o EI ./LOGS/stderr s PSBRKDSP_dflt:Dispatch - APPDOM d s PSBRKDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSPUBHND o EI ./LOGS/stderr s PSPUBHND_dflt:PubConProcess - APPDOM d s PSPUBHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSPUBDSP o EI ./LOGS/stderr s PSPUBDSP_dflt:Dispatch - APPDOM d s PSPUBDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSUBHND o EI ./LOGS/stderr s PSSUBHND_dflt:SubConProcess - APPDOM d s PSSUBHND_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSSUBDSP o EI ./LOGS/stderr s PSSUBDSP_dflt:Dispatch - APPDOM d s PSSUBDSP_dflt ./LOGS/stdout:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec PSMONITORSRV o ./LOGS/stdout e ./LOGS/stderr - A - ID - 55021 d APPDOM s PSMONITORSRV:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec JSL o ./LOGS/stdout e ./LOGS/stderr - A - d - m 5 - M 7 - //hrapp.xflash.com:9000 I have 5-j ANY - 40 x 10 - c 1000000 JSH w s:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  exec JREPSVR o ./LOGS/stdout e ./LOGS/stderr - A - W Pei /home/psadm2/ps/pt/8.50/appserv/APPDOM/jrepository:
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 820 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  NLS:4: Cannot open the message CMDTUX_CAT, the value 1, num 774 catalogue; Check TUXDIR = / opt/oracle/TFTP/appbatch/bea/tuxedo, LANG = fr_FR. UTF-8
  
  Thank you

  Please, once you connect to the application server Peoplesoft VM with psadm2, run the following:

  env|grep LANG
  

  And post the result.

  LANG should be C, if this isn't your side follow these steps:

  export LANG=C
  

  And re-start the Appserver field.
  To keep consistency during the startup of the server, add the line in the psadm2 user .bash_profile.

  Changed the .bash_profile or any other initialization file? Because everything should be fine by default.

  Nicolas.

  Published by: Gasparotto N on December 30, 2009 19:09

• How to leave machine machine virtual ESX v3.5 for Vsphere v4.1?

  Hello

  I would like our VMS ESX v3.5 to a new VShere v4.1.

  Virtual machines are Windows 2003, RedHat 4 and 5.

  I wouldn't have any impact on the machine esource th.

  Methods:

  (1) stop the virtual machines, copy the folder with vmdk from the old data to the new store data + Start new store + install the new VmWare Tols

  OR

  (2) use the Option migrate (change the host + Datastore), works for the RedtHat Machines

  Thanks for the reply

  Welcome to the Forums - both will work but I use cold migrate method change of host and the data store.

  If you have found this device or any other answer useful please consider awarding points.

• Difference between the workstation and the machines virtual ESXi?

  Apart from convert vmdk of thin thickness oversupply, what exactly does the download feature in WS 8 and later versions do, vs, simply by making a copy + paste of the virtual machine to the machine running Workstation in the ESXi data store?

  Besides, why Upload even converts vmdk of thin thickness providing? You can create native thin disks configured in ESXi is not as if ESXi does not support the feature...

  VMware Workstation is not (cannot) use a provisioning. The hard format is a fragmented file format that contains metadata about the blocks of data used in the file itself. This format is not supported with ESXi, and this is why it must be converted.

  André

• Do I have to stop the machine virtual RAM and CPU?

  I have a virtual machine that has only 1 core and 1 GB of RAM I need to upgrade. Is in the past, I always stop the machine to do this, there a way for both without stopping the machine?

  Welcome to the community - with memory you can do it with the machine. CPU with vSphere 4 you need to close the virtual machine.

• How can I share a unique ROW between several machines virtual ESX 4.0?

  Hi all

  How can I leave the two virtual machine see the same SAN LUNS (how can I share same LUNS between two virtual machines).

  Thank you

  Welcome to the Forums - try you two virtual machines in the cluster? If you are this should help - http://www.vmware.com/pdf/vsphere4/r41/vsp_41_mscs.pdf. If you're looking to share a data store I relate to one of the virtual machines and then either through creating CIFS share if they are windows machines or a NFS if Linux

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Question to get the maximum virtual machine via powercli read IOPS / s

  Hello

  I use this script REPORT maximum and average OPS / s (writing & reading) based mainly in this script by LucD vmware communities user:

  $datastores = "datastore.*" EMC - LUN. * | "SAN - vm.."

  $MinIOPSWriteMax = 10

  $MinIOPSReadMax = 10

  $metrics = "disk.numberwrite.summation", "disk.numberread.summation".

  $start = (get-Date). AddDays(-1)

  $report = @)

  $vms = get - VM | where {$_.} PowerState - eq "Receptor"}

  $stats = get-Stat-Realtime-Stat $metrics - entity $vms - start $start

  $interval = $stats [0]. IntervalSecs

  $lunTab = @ {}

  foreach ($ds in (Get-Datastore - VM $vms | where {($_.)})) Type - eq "VMFS") - and ($_.) Name - match $datastores)})) {}

  $ds.ExtensionData.Info.Vmfs.Extent | %{

  $lunTab [$_] DiskName] = $ds. Name

  }

  }

  $report = $stats | Group-object - property {$_.} @entity.name}, Instance | %{

  New-object PSObject-property @ {}

  VM = $_. Values [0]

  Disc = $_. Values [1]

  IOPSWriteMax = ($_.) Group | `

  where {$_.} MetricId - eq "disk.numberwrite.summation"} | `

  Measure - Object - property - maximum value). Maximum / $interval

  IOPSWriteAvg = ($_.) Group | `

  where {$_.} MetricId - eq "disk.numberwrite.summation"} | `

  Measure-object-propriete value - average). Average / $interval

  IOPSReadMax = ($_.) Group | `

  where {$_.} MetricId - eq "disk.numbertread.summation"} | `

  Measure - Object - property - maximum value). Maximum / $interval

  IOPSReadAvg = ($_.) Group | `

  where {$_.} MetricId - eq "disk.numberread.summation"} | `

  Measure-object-propriete value - average). Average / $interval

  Data store = $lunTab [$_] Values [1]]

  }

  }

  $report | IOPSWriteMax tri-objet-descending | WHERE-object {($_.)} IOPSWriteMax - ge $MinIOPSWriteMax) - or ($_.) IOPSReadMax - ge $MinIOPSReadMax)} | Select the virtual machine, disc, Datastore, IOPSWriteMax, IOPSWriteAvg, IOPSReadMax, IOPSReadAvg | more

  Is this a normal behavior, still getting 0 in all the IOPSReadMax vm?

  Thanks in advance.

  Best regards

  Pablo

  You have just a typing mistake in the name of metrics here ("numbertread" instead of "numberread"):

  where {$_.} MetricId - eq 'drive. numbertread.summation '} | `

• SQL 2005 Ent on machine virtual ESX 3.5

  I built a Windows Server 2003 Enterprise VM inside VMware (ESX Server 3.5 Update 3) host. We have Celerra NS20 Unifided EMC storage, which is where the server VM using different LUN. Does anyone have recommendations on installation of SQL 2005 Enterprise on a given server to Win2k3 VM, with regard to the way in which it must be installed in order to get the best performance and reliability... I'm looking for suggestions as SQL must be installed on the drive main hard and stored on a different LUN or SQL databases must be installed on a different LUN of the operating system? I intend setting up a LUN specifically for newspapers, so to keep separated from traffic, but wonder about the base installation of SQL and databases...

  Thanks for any advise you might have.

  It is a big question.  Here are a few things I do in this case...

  • Do not install anything - even the binary SQL on C

  • Prune/use a VMFS RAID5 for the SQL programs and databases on a volume

  • Want/use a VMFS RAID1 for newspapers

  There are 2 important things here.  One is that you have isolated the OS - DB and registers all logical drives different worms.  It is very nice to be able to make a hot grow of these disks

  The other is more for performance.  It depends on how transactional (how'RE Ops / s) the system will be.  In most cases, you should be able to have the other VM to share these same volumes, but changing the RAID level can provide a performance gain based on how the data are accessible.

  I don't know if it would be necessary to isolate a VMFS LUNS () set to the SQL database for a virtual machine.  It is a function of your SAN infrastructure and how hard the VM SQL is hit.

  We have several virtual machines with DB on the same LUN, and so far it hasn't appeared to cause problems.  You can always start with a more conservative approach and slowly add that you feel comfortable.

• USB host does not not at the point where the machine virtual running?

  I'm not a magician of the VM by all means.  I have very limited knowledge of them and use them to very specific things.

  But I am currently using VMWare Workstation 7.1.2 and when I have the computer running, virtual host machine (I think that's what it's called, my REAL physical machine), which is running Win7 x 64, does not recognize USB devices such as headsets and cell phones... but the virtual machine will be.

  How to solve this problem?  I tried searching and found similar issues but not the same... so I apologize if it's been covered.

  Thank you!

  Open a cmd as Admin - type

  net stop vmusbarbservice

  This should result in a message that the specified service is stopped

  You can use USB host now?

• From machines virtual ESX 3.5 to 4.0 help

  I need to move virtual machines that reside on a box of ESX 3.5 and put on a case of ESX 4.0 currently.  Virtual machines live on the network so SAN is just as easy to move files to a SAN to another?   Or is it also a process of upgrading involved?    Thanks for the help.

  If you just move the virtual machines to another host SAN and ESX 4 they will run. However, it would be nicer if also upgrade you the hardware of the VMS to version 7 and also upgrade the VMware tools. Do not forget that after upgrading hardware to virtual machines to version 7, you will not be able to bring back the virtual machines on an ESX 3.5 host.

  Best regards, Robert

• Problem with turn the machine virtual (ESXi 3.5)

  Hello I just installed a virtual machine (Ubuntu 9.04), I also inserted an iso file (data store) in the options of cd/dvd.

  But when turn the virtual machine I get the following error:

  Could not power on the virtual machine: the verification of Admission of resource memory failure

  Please see for the guide to management of vmware esx server for more information about the settings for resource management.

  Cannot power on the virtual computer.

  How can I solve this problem? I want to just install some os, when turn it always gives an error.

  Thanks in advance,

  David

  Have a look here: http://www.jeremyroe.net/?p=102

• Download machine virtual ESX of ESX1 and copy to ESX2.

  Hello

  I'm trying to copy a VM ESX comments from the server 1 Server 2.  I tried using VMware Converter 3.0.3 to rename the virtual server, and then copy it into ESX2. Then from then on out, change its host name, and then return to the field as a completely separate server.  However, VMware Converter is not let me import or I'm doing this wrong way?

  Scott.

  Thanks for the help discovered their was a problem with the vmware agent and he broke during the clone to the virtual machine. Reinstalled VMware Converter and the problem was solved.

  Thanks for your help.

• How to operate the machine virtual de Workstation9 on ESXi5

  Hi guys

  I installed RHEL5.6 in a virtual Workstation 9 machine & run this VM on ESXi5.

  on workstation9, I tried to export to the OVF... and after that on ESXi5 I tried to deploy OVF one-piece... but it gives me error:

  

  So what could do to run this VM on ESXi5, or any other way to do this? any suggestions would be fun.

  Thank you

  Virtual hardware version 9 is supported only by ESXi 5.1. The best way to fix this is to downgrade virtual compatibility mode for the virtual machine in VMware Workstation before exporting the virtual machine to the FVO.

  André