went to the command and put in findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt to find the corrupted file and nothing happened
I had a problem with my laptop. I let a friend use it and she got a virus. The screen is black. She took it to get fixed. When she returned I couldn't open some files. (Always have this problem with some files) my shortcut icons are no longer there. Then I get this message on the Catalyst Control Center does not work. In any case, I did a scan and he told me that I had corrupted in my cbs log files so I tried to do the command findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt to find the corrupted file and nothing happened. Help!
Hello
Departure - in the search box, type-> order
at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
It might also be a good idea to updare drivers network - NETWORK card (wired) and WiFi (wireless)
by checing at the site of the manufacturer of the system/card mother and/or sites of the manufacturer of the real device.
Methods for manual update of driver at the end of this response.
--------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------
For settings.ini as this article sets out the question may be totally ignored.
The SFC.exe command reports Settings.ini file errors in the CBS.log file after that you add gadgets
for the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file.
http://support.Microsoft.com/kb/947595
-----------------------------------------------------------------------------------------------------------------------------
These errors only are in the settings.ini for the sidebar and are not a serious problem by all means.
Close the sidebar for that.
Something else for the settings.ini - run AutoRuns and look at the entries SideBar Gadget - y at - it
all pointing to is no longer present as temp files or uninstalled gadgets or not running?
Those who will reflect the "yellow icons" on the left side and the files/folders will not exist. If so just
Click on it and delete - Reboot. This may correct the errors that you see.
Autoruns - free - see what programs are configured so that it starts automatically when your system
boots and you login. Autoruns shows you the full list of registry and file locations where
applications can configure Auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
-------------------------------
Another process to try is to remove everything except a gadget - everything what you think is the most simple, that you use.
Maybe the calendar. Then RESTART - use another simple gadget, and delete the first class used
-RESTART again. See if that helps.
Rarely, the error causing the problem with the sidebar and not not affect the system in general.
The SFC.exe command reports Settings.ini file errors in the CBS.log file after that you add gadgets to
the Sidebar of Windows Vista by using the Sysprep tool and an Autounattend.xml file.
http://support.Microsoft.com/kb/947595
-------------------------------
Another method to try with the SideBar works does not is to copy the Settings.ini to another folder and
and then delete - then start sidebar.
--------------------------------
For tcpmon.ini and settings.ini:
You can also try to restore any copy of a Vista DVD (even 32 or 64 bit however).
Access files on your Vista installation DVD
http://www.Vistax64.com/tutorials/86959-access-Vista-install-DVD-files.html
How to extract system files missing from the DVD of Windows 7/Vista.
http://blog.NirSoft.NET/2009/09/17/how-to-extract-missing-system-files-from-the-DVD-of-Windows-7vista/
===================================================
===================================================
Also update your drivers: (WiFi (wireless), NIC (Wired) and others as required)
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.
Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.
Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.
Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.
Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
I put the camera chip in the hard drive and nothing happens?
I put two camera differand chips in the hard drive to load pictures and nothing happens
Hello
Thanks for your posting in the Microsoft community
How did you put camera chip in the HDD, I think that you have inserted in to memory card reader
Connect the cable to USB memory card and reformat the card, update your card drivers, and insert the memory card, the computer should then detect and reformat the card again
Check in Device Manager
1 right click on my computer.
2. Select Manage.
3. in the left pane, click Device Manager.
Refresh the drivers
1. right click on the entry with the error indicator, select Uninstall.
2. on the main menu, click Action, and then Scan for the hardware changes
Check if the drive is detected
1. double-click on my computer.
2. find the drive under devices with removable storage card.
Try other USB ports.
A yellow exclamation point . in Device Manager means generally that the device does not have enough power. If the player does not receive a sufficient amount of power from the USB port -
Moose title: How can I get the age of Mythology to work on windows vista
every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer
Hi rew55545,
(1) is this problem limited only to the age of Mythology disc?
(2) what version of the game you are trying to install?
Method 1: Run the fixit available in the link below and check if that makes a difference
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2: run the fixit available in the link below to resolve any problems with DVD player.Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
I have synced my Hotmail account with Mail on RT and mail comes and goes well. All my files from my Outlook account transferred.
However, whenever I try to move a message read in the Inbox to a folder, clicking the command move at the bottom of the screen (after pulling up to the command bar), results in the grizzled screen and nothing happens for hours. It seems that the system is blocked until I tap the gray screen and I'm back to where I was. In others, move the message command doesn't seem to work.
I found that when I press the movement it gray to the screen with the exception of the list of folders on the left.
I can then scroll up and down the list of folders and click the folder that I want to move the message.
Seems to work ok for me.
Steve
-
Hey guys, ive tryied buy photoshop like a hundret times, ive typed in my information payment and everything I need, went on the button pay on the accept button but nothing happened, I need help pls passing sry for my language
Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html
-
My iphoto does not open. When I click on the circle still turns but nothing happens. I tried to open it with command + option and reconstruction and nothing happened. I have version 9.2.3. Any advice will be greatly appreciated.
If you recently updated to El Capitan, your version of iPhoto is not compatible with this OS.
What version of Mac OS X are you running?
-
I chose pictures, went to Photos, fusion, selected HDR photos and nothing happens. I'm developing in Lightroom CC
Hi Whidbeytom,
Ensure that the program is updated: keeping up-to-date for Lightroom
And would make sure if your graphics card is supported and if you have enough VRAM (over 1 GB) as required: Adobe Lightroom GPU troubleshooting and FAQ
Kind regards
Claes
-
Buttons on the dialog and prompt boxes are empty and nothing happens when I click on them.
Whenever a dialog box or a dialog box appears, all the buttons, or sometimes just the low two (OK and cancel) are empty and nothing happens when I click on them, with the exception of a Web site in which clicking on the white button who normally says 'OK' takes me to a white screen. This does not allow me to access some sites or Web download anything when a dialog box asks me to confirm. So, I also can't start firefox in safe mode or refresh.
An example is attached. This is what came up when I tried to update to firefox. Nothing happens when I click on one of the buttons at the bottom.
EDIT: Attached the image.
Hmm. could be a corrupted file was the cause, and it replaced.
As long as the problem disappeared.Please mark your last post as solved so other will know.
If the problem will reappear, ask a new question.
Surf safely.
-
I forgot my master password. I used the address provided to reset. He takes me to the page that tells me that all passwords will be forgotten and gives the possibility to RESET or CANCEL. I try choosing RESET and nothing happens. What am I doing here?
Hello DawnC, what you could do in this case is to manually delete the password in your profile folder: go to firefox > help > troubleshooting information, click on file/show profile folder and close all firefox windows later. a windows Explorer window should open - delete or rename files named signons.sqlite (and if all other files of text beginning by sign) & signons3.txt - they will be regenerated the next time you start the browser again.
-
15.0.1 Mozilla gets stuck. You click on the links and nothing happens. No wheels spinning, nothing. I open Firefox in a new window, the same thing. I can only fix it by starting the Task Manager and close all Firefox Windows. [When I launch Internet Explorer, there no problem.] Thanks for your help!
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > content caching Web: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).
- Do not click on the reset button on the start safe mode window or make changes.
- https://support.Mozilla.org/KB/safe+mode
-
When I type a name in the search bar Google using the classic Home Page, nothing happens. By example, if I type the name of the BASEBALL and then press ENTER, nothing happens. This just started today.
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
Do a check with some malware malware, analysis of programs on the Windows computer.
You need to scan with all programs, because each program detects a different malicious program.
Make sure that you update each program to get the latest version of their databases before scanning.- http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
- http://www.superantispyware.com/ - SuperAntispyware
- http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
- http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
- http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
Alternatively, you can write a check for an infection rootkit TDSSKiller.
See also:
- "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
-
Hello
I have a problem with my wifi. The button always orange and nothing happens when I press on it: no errors, no message, no reaction at all. This is why I can't use WiFi.
The laptop is a little new: I use only 2 months.
1. number and product name
HP EliteBook 8560p
НР LQ589AW2 operating system installed (if applicable)
Windows 7 Professional 64 bit
3. error message (if any)
No error message
4. all changes made to your system until the problem occurred
My windows crashed and I got it from archive created a few days ago. Archive includes all data from hard drives, the system has been restored exactly as it was before the accident. I still don't know if this caused the problem (or if the problem occurred after that): it happened a month ago, and I had no WiFi available at the time and only tried to turn it on a few days ago.
Additional details:
In device manager wireless card is appearing as functioning normally. In the management of the adapter Wi - Fi is on but says "no connection available. If I run diagnostic tests, he asks me to activate WIFI with a button on my laptop, which I can't do. In Mobility Center, it says "connection Wi - Fi is turned off". Activate the button is gray and impossible to click on.
I already tried things:
- Reinstalled all the HP drivers from original CD.
- Card WiFi removed in the windows Device Manager (remove device), restarted windows, installed new drivers for it, rebooted again;
- Checked the mobility Center as suggested in one of the threads available on this forum;
- Do a hard reset for HP laptop (battery removed, push the button and hold for a minute).
Thanks for any help!
Anatoliy.
I managed to solve the problem...
Turns out that the problem was (apparently) caused by HP Power Assistant tool shipped with my laptop. Default profile has been showing the gray bluetooth and WiFi, and it was not possible to turn them on. I created a new profile, and even if all the parameters are identical to the default profile, it allows me to turn the BT and WiFi and turn off without any problems. Button is working fine now as well and goes from blue to orange when I press it. Active WiFi and it works.
I hope this helps.
-
I can't install the modules from the official site of mozilla Add-ons. I click 'Add to firefox' and nothing happens!
Hello
Please check if a green icon is added to the left of the icon in the Web site address bar after clicking on Add to Firefox. If it appears, click it, check the message and select the desired action.
Another reason could be that the extension could block Javascript or other features of the site.
-
I have an iPad2 version 9.2.1 from the music application only the apple logo appears and nothing happens...
I did a reboot, nothing has changed.
so the music app is an application by default/standard, it cannot be removed or reloaded.
-
Attention kept blinking and nothing happens, not the paper jam (HP LaserJet 1022)
Hello
I have a HP LaserJet 1022 and when I turned it on, nothing else has happened except a flashing caution light. There was no noise and nothing happens.
I checked a few times for any signs of paper jam, but that's clearly not is why so I took the print cartridge and it has inspected.
The imaging drum (which is the green part of the cartridge here in this link
http://www.Google.com.my/imgres?UM=1&hl=en&SA=N&TBO=d&BIW=1366&BiH=631&TBM=isch&tbnid=ceXkLCzurUwVaM... If I'm not mistaken had to be clean and intact. My Imaging drum has words on it in black ink which is still wet that was obviously left by previous print jobs.
Also when it is connected to the computer without pop - ups nothing displayed on the computer screen.So this could be the problem of why the printer does not work?
Any help is very appreciated!
Here is a document that deals with the flashing light in your printer model. It will give a possible scenarios on how the lights on the printer are flashing, Advisor to the cause of the problem and then provide one solution to try to try to resolve the problem. I hope this helps.
Maybe you are looking for
-
Hello I bought an iPad Pro and set up the Apple ID and password as someone else. Now, I have my own Apple ID and password. When I tried to change settings in the Apple ID account page, he changed the account information on the iPhone from my friend,
-
Sat Pro L10: Cannot install printer
Hello I have a portable Satellite Pro L10 and have had problems to install an HP photosmart 7350 printer.After installation if I try to print, the computer indicates a failure to print warning. This printer works very well on my main computer that is
-
Re: How to change German English - Satellite A3 Vista Home
Hi guys I have a Toshiba Satellite A300 1HP with Windows Vista home premium.I bought of the Germany and the Vista is language lanyguage Germany and want to switch to the English language. Someone can help me.Thank you very much.
-
I recently discovered what may be a bug or a serious error in the Windows 7 search engine, I'm not really sure of that. Heck, it could be just that the options are formulated in a misleading way, and I don't realize. Anyway slice you it, I have no
-
BlackBerry Smartphones Can I get ringtones out more?
I now have the Bold 9900. Really nice phone. Easy to scroll etc. But what annoyed me, is that the ringtones on the 8520 are not on the 9900... so if you get use to them, you can have is more them. Everyone here has the ability to send me a link to