WGA600N and the WRVS4400N

Similar Questions

• WGA600N and uTorrent... capped at 200 Kbps?

  I recently installed the WGA600N and hooked up through my card pci ethernet (gigabit capable), and everything looks good except for downloading via bittorrent.  It is connected to a DIR-825 in the 5 GHz range to N only.  The DIR-825 related forces signal about 70 to 75% and a rate of 270 to 300 Mbps.  However, in the connection network icon in the right sidebar below shows speed: 100.0 Mbps.  Not sure why this will not jump above 100 Mbps with the ethernet card compatible gigabit and forces signal strong enough?  With all that being said... If I upload a file via the web/firefox I can hit speeds of up to about 600 Kbps... BUT, if I run a bittorrent via uTorrent I out cap to a max of 200 kbps download speed.

  Am I missing a setting on the WGA600N?  Why would I capped at 200 kbps download via a bittorrent client speeds?  In addition, all the drivers are updated, my port is open, and I was able to reach speeds of 600 Kbps in uTorrent via another D-Link N adapter, so I know that's not my internet connection (Fios).

  Thanks in advance for any help!

  I solved this problem.  My connection speed of global download in uTorrent preferences has been somehow set to 200 Kbps max.  So my question has nothing to do with the WGA600N.  Sorry for the waste of space here.

• VPN poor Performance - Cisco RV220W and routers WRVS4400N

  Hello

  To one of our customer IPSec VPN is established between Cisco RV 220W and routers of Cisco WRVS4400N.

  Router VPN /ISP details are as below

  Location was	Location B
  Details of the Internet ---------------------- DOWNLOAD: 6 to 10 Mbps Upload: 1 to 2 Mbps Details of router ---------------------- Cisco RV220W Firmware: 1.0.3.5 IKE policy Encryption: 3DES Authentication: MD5 Group: Group 2 Life key: 28800 sec VPN strategy Encryption: 3DES Authentication: SHA - 1 Group: 1024 bits (Group 2) Life key: 3 600 s Perfect Forward Secrecy: enabled	Details of the Internet ------------------------- DOWNLOAD: 1.35 Mbps Upload: 1.24 Mbps Details of router ---------------------- Cisco WRVS4400N Firmware version: V2.0.1.3 Phase 1 Encryption: 3DES Authentication: MD5 Group: 1024 bits (Group 2) Life key: 28800 sec Phase 2 Encryption: 3DES Authentication: SHA - 1 Group: 1024 bits (Group 2) Life key: 3 600 s Perfect Forward Secrecy: enabled

  From the day that VPN has been implemented, the performance was poor. Frequent disconnections sessions live to the VPN nodes and very low transfer rate was alarming to users.

  The servers in A location and users to the site B gets authenticated at the server DC level in A location

  Applications of Terminal Server remote as Quickbooks, QQ Evolution, attendance RX serve also the location has by users to the location B

  The login is your time and all applications are extremely slow.

  I tried to copy files between share data between two locations and the results are as follows

  Location A to location B-> 130 Kbps 140 Kbps

  Location location B A-> 150 Kbps to 160 Kbps

  What can be the problem for these poor performance VPN?

  -Change the encryption for the least secure OF THE /MD5 would have a significant impact because it can reduce the overload on the routers?

  -Even if both routers are routers SMB, it has really good VPN flow according to the data sheets. I couldn't find VPN flow mentioned in the WRVS4400N data sheet. One of the sons of CSC, I also noticed the VPN of WRVS4400N flow seemed really low as only about 1.6Mbps. (https://supportforums.cisco.com/thread/2107881)  Whereas RV220W router has VPN 90Mbps flow, according to the datasheet.

  So, what can be the cause of the problem and what can be fixes possible?

  Help, please!

  ANUP sisi

  Beginner to router Cisco VPN, please help

  RVS4000 was designed to work in a small office. It supports 5 VPN tunnels with a maxium of 2 Mbps flow measured in a laboratory environment. It has a processor that has a motor integrated IPS, who would deliver 20 Mbps LAN - WAN throughput when IPS is enabled.

  RV220W has been designed to operate in a slightly larger office with 25 IPsec VPN tunnels. It has a processor that has a built-in cryptographic engine able to deliver throughput 90 Mbps of IPsec. RV220W also supports 5 SSL VPN tunnels that can be used by employees and business partners for remote access.

• Pedometer in health app inaccurate since ios10.02 update and followed by the month and the year disappeared. Why?

  I used the pedometer in the application of health that accompanies the iPhone6 for 18 months. I walk on a treadmill each morning for the same distance and time. The number of step was close enough for more than a year, but then I updated to ios10.02 and the count has been reduced by more than 2500 steps every day for the same duration of time and distance on the treadmill. He remained much lower now for two weeks. I also notice that the dashboard no longer offers a total annual and medium, or monthly. Is there a fix to come or was the unit off so much for the previous year?

  kjm2222 wrote:

  I also notice that the dashboard no longer offers a total annual and medium, or monthly.

  You can still access graphics monthly and annual. In the form of health data, press activity. Swipe to today. Tap measures. You will then see a graph and a bar with options to choose to see it in days, months, or year. This works with any metric system.

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• Cannot restart or refresh my iPhone 7 from the "home" button and the sleep/wake button at the same time

  I'm having difficulty trying to restart and update my iPhone 7 using the Home button and the sleep/wake button at the same time, when I do my phone takes a screenshot of the home screen.

  Should I turn off my Touch ID?

  Basically my home button button and / standby works not together at the same time.

  You need hold the House and turn off the button for 20 seconds, until the Apple logo appears.

• The keyboard and the mouse no longer works to update you Sierra

  Hello, I upgraded to OS Sierra and I began to spend more and suspending Notepad, then I do not recognize their keyboard and mouse notbook. It forces the walk outside and then worked, but after a few days I don't work any more.

  Thank you

  The keyboard and the mouse no longer works to update you Sierra

  Hi gnardone,

  Thanks for posting in the Community Support from Apple. I understand that you are having problems using your mouse and your keyboard after the update for Sierra. View the work of keyboard and mouse are crucial for your Mac, so I can understand how this is a problem for you. I'm happy to offer assistance.

  You are having problems with the keyboard and the trackpad that are part of your MacBook or you are having problems with a keyboard and an external mouse? I recommend taking a look at the article below.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected

  If you're still having trouble, let us know what kind of mouse and keyboard that you are having problems with and what you have tried to solve this problem.

  Best regards.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• iTunes and the App Store will not loading after update iOS

  I downloaded iOS 10.0.2 on my iPad Air. Now, neither iTunes nor the AppStore will connect. All the settings are correct and my internet connection is strong. What should I do?

  Hello. The time zone and the region are compatible with your actual location? If you've restarted since the update? Home amd Hold sleep until you see the Apple.

• I have someone just showed about 100 pictures of my iPad. Now, the pictures are missing, and the "recently deleted" folder is also empty. What can I do?

  I have someone just showed about 100 pictures of my iPad. Now, the pictures are missing, and the "recently deleted" folder is also empty. What can I do?

  Have you done something after their show.

• Presenter PowerPoint on Mac mini mode displayed on the screen and the projector when using HDMI splitter

  We have a Mac mini connected to a screen and a projector via HDMI using a HDMI splitter.

  It works fine for most applications, but during presentations PowerPoint, presenter is displayed on the monitor and the projector.

  When I disconnected the mini Mac's HDMI cable and put it in a MacBook, the presenter appeared on the MacBook screen (as it should) and only the slide appears on the screen and on the projection screen.

  Of course if we have to use the MacBook for presentations instead of the Mac mini, you would need to have seen the presenter on both the screen and on the screen of the MacBook.

  In the Mac mini display preferences there is no button to "Gather Windows" when the Mac mini is attached to the screen and the projector via HDMI splitter is a tab "setting."

  But these two things appear on the MacBook when it is connected.

  Any help would be greatly appreciated.

  Thank you!

  Mike

  

  

  I'm confused. When you use a video separator the same screen will appear on the two monitors connected to the separator. This is how works a separator

• iTunes and the iCloud music

  What I want to do is quite simple - but, as far as I can see, cannot be done.

  I am registered at the Apple music (trial version) and automatically the system transferred my entire library of music in the cloud.  Not what I wanted!

  I want to remove a lot of the cloud and have tried to do.  As far as I can see, you can clear the downloads (which leaves them in the cloud...) or completely remove the cloud and your library.

  Quite simply, I want to keep everything I bought in my music library, but remove it is the cloud... - too much to ask?

  Here is the message I get when I try to delete...

  

  So, it's either download remove only, or remove it completely.  It's crazy.  Can anyone help?  Please tell me that this request is possible!

  Thanks for any help...

  Stuart S

  Hello

  Download click on them, and then to the right and the option "reveal in finder". You can then make a backup of all your songs from there.

  Once you have your backup, you can unsubscribe from Apple's music or just disable music Apple since iTunes settings and then re-import all your songs. It'll be like before.

• Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)

  Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)?  I contemplate moving to Sierra, but not if it comes into conflict with Logic Pro.  Can someone advise?

  Thank you!

  Matt

  It was reported a number of not being able to save or to new projects with the title of the Sierra.

  I would conclude some time if I were you, especially if everything is working well at the moment.

• All of a sudden I lost all my emails and none are pass, even if they are still going to my computer. I checked in settings and the e-mail address is still there. Help!

  I suddenly lost all my emails on my Ipad and none are pass, even if they are still going to my computer. I checked in settings and the e-mail address is still there. Help!

  Have you tried to delete the account and adding it back?

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!