What are Satellite Pro 6000-compatible DVD - RW drives

Similar Questions

• Satellite Pro M10: compatible DVD - RW drive internal?

  Hello

  I was unable to find the compatible internal DVD - RW players on the Web site for my model. Is this possible? Could I get one to say a Tecra and press my machine or cannibalizes my current transmission case to make it fit?

  Thank you

  Michael

  Hello

  The fact is that no all readers are taken in charge and compatible with all laptop.
  Fact is also that there no official information on the site which drives are compatible.
  If you want to upgrade the drive or buy a new one, then you should ask the AEP from Toshiba for the compatible. The guys should have the s of detailed information on the supported devices.

  I also found this ad on a similar question:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13083&MessageID=47885

• Satellite Pro 6000: Base system device driver for XP

  Hello

  I want to install the:
  M - systems diskonchip 2000

  and the:

  Base system device

  On my Satellite Pro 6000 (XP).

  Does anyone know what I need to install drivers?

  Hello JR

  Did you install chipset driver?

  On this page of European driver for Toshiba-> * Archives *!

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Satellite Pro M30 - compatible DVD players

  Hello

  I have a Satellite Pro M30 and the optical block has problems, recognizing most of my DVDs.
  I want to change the drive, does anyone know which are the models compatible with this machine?
  The real player is Toshiba DVD - ROM SD-R6112.

  Thank you
  Daniel

  Hello

  As far as I know this unit has DVD +-R/RW (DualDrive) and in my opinion the best solution is to swap it with the same. On this way, you will be sure that everything works correctly.

  Unfortunately, there is no public document on the hardware upgrade and just Toshiba service partners can tell you more about it.

  Good bye

• Satellite Pro 6000 lost DVD/CD Rom drive after upgrade to win 2000 sp4

  Help, please! I have a laptop Toshiba SP 6000 and after download win 2000 sp4 on the internet have completely lost my CD-ROM/DVD-Rom drive. When I go to my computer and Device Manager it has a yellow I and following the warning "windows cannot load the driver that windows is unable to locate relevant data' and it has error code 31? I've been on the Toshiba site but don't know which update to take! I really need help.

  Hello

  Well, it the very strange question s. normally after the installation of the new operating system must be recognized the CD/DVD driver.
  I have studied in the web and find nice websites that describes this problem.
  Check this site:
  http://TechRepublic.com.com/5208-11183-0.html?forumid=89&ThreadId=181561&start=0
  http://support.Microsoft.com/kb/q270008/
  http://support.Microsoft.com/default.aspx?scid=KB;%5BLN%5d; Q314060

  Good luck

  Good bye

• DVD burner for Satellite Pro 6000?

  I have a lite - on dvd slimline burner we don't work in the sp6000
  now, I want to know Witch one does not work in a satellite pro 6000?

  (DVD burner or a combination dvd/CD-RW)

  As far as I know that no engraver of DVD or combo for Satellite Pro 6000 driver is available. Download and review the Satellite Pro 6000 user manual. There are readers who must be compatible.
  I found these:
  Reader of DVD - ROM SD-C2502
  -Player CD-R/RW UJDA340
  -Drive CD-RW/DVD-ROM UJDA720
  -Drive CD-RW/DVD-ROM SD-R2102
  Reader of DVD - ROM GDR-8081

  But if you want to be 100% sure, you can contact the ASP in your country. There also order you the discs

• Satellite Pro 6000: video controller - driver compatible vga

  Hello

  I have a Satellite Pro 6000 but I can't watch DVD because they run very slowly.
  That's probably because my video controller is not installed, but I can't find a
  Driver video controller for a 6000 SP. My OS is XP.
  Can someone help me?
  Thank you

  Hello

  You need to install the Trident display driver. You can find it on the European driver Toshiba page in the Archive folder.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Choose Archive-> Archive Pro Satellite-> Satellite Pro 60xx-> Satellite Pro 6000-> Win XP

  By the way; You must use a special software like PowerDVD or WinDVD to play and watch DVD movies!

• The Satellite Pro 6000 motherboard is compatible with the satellite Pro 6100?

  Hello, need information about mainbord...
  Is the the same Satellite Pro 6000 and 6100 mainbord?

  Satellite Pro 6000 belongs to the PS600E series, and it supports the Celeron and PIII-M (Mobile) processor.

  The Satellite Pro 6100 belongs to the series of PS610E and supports the CPU P4 - M (Mobile).

  The two laptops are very similar so eventually Sat Pro 6000 motherboard could enter Satellite Pro 6100.

• Updated by Satellite Pro 6000 with a DVD burner - technical question

  Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
  He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

  But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
  Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

  Someone here who can help?

  Thanks in advance! lionesse62

  Hello

  You need a special screwdriver to remove the module bay select (CD/DVD drive).
  A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

  I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

  However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

  (1) turn the computer
  (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
  (3) slide the lever and pull place the selectable bay module.

  After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
  The frame is blocked with five super flat head white M2x3 screw.

  As I said, if you can not remove these screws and then ask a technician for help.

  Good bye

• Satellite Pro 6000 and SD-R6472 DVD burner

  In response to my previous posting (now locked), the engraver of the SD-R6472 DVD can be used with Satellite Pro 6000.

  Firstly used the dreaded IDE 1 # error will be encountered, but not panic, this can be overcome by asking the Technical Support CSEL-Changer Toshiba Software and this will change the master/slave setting of the drive.
  After that, everything works fine.

  Hello

  Thanks for the useful information.
  I'm sure that this information will help other users who have similar problems.

  Good bye

• Satellite Pro 6000: error LED message - what does this mean?

  Hello

  I have gad an old Toshiba Satellite Pro 6000. Sometimes, not after a period, he died. I have gad error code because the DC IN Red flashes orange. The blink rate is 1 x 3 long short 1 x length 2 x 1 short long = 10001001 in bin = 91 h (is this true?)

  Now 91 h ist the following error: 1R5 - E1V voltage is not more than 1.275V when the computer is turned on. But what the hell of this error means? What is 1R5 - E1V?

  Need help. Greetz

  Hello

  Read the code back!

  10001001 = 1001 0001 = 91 H
  http://www.prepressure.com/library/BinHex.htm

  I think there is something wrong with the electronics of the Board of Directors.
  Therefore, you will need to contact the ASP from Toshiba for help.

• Satellite Pro 6000: What WLAn Module?

  Hello
  Anyone know which Module WLAn can be used in a Satellite Pro 6000.
  My NB is pre-installed for WLan but I don't want to use only 11MBit Module and the other are not signed for the SP6000.
  Can I use this module to 54 megabits?
  Thank you
  Daishi

  Hello

  As far as I know this unit supports only the 802. 11b Wireless LAN Mini PCI Card.
  This Mini PCI card, I got with a flow of data 11Mbit.
  In this case, I think that you can use a Mini PCI card with 11Mbit.
  But nevertheless you ca also use a PCMCIA wireless card. This card is also available with 54 Mbps data rate.

  Good bye

• Satellite Pro 6000: what is a 3rd Brown cable to WLan?

  I recently bought a second hand toshiba satellite pro 6000. When I bought the wireless adapter is not connected correctly, the black and white wires are connected to the mini pc card, but there is a Brown wire with the same end of the connector that is loose.
  I don't see where it is supposed to go, and the result is that the quality of the connection is bad at 13%.

  If anyone could tell me where this third cable must be connected to it should enhance my quality link (the signal is excellent at 100%)

  Thank you.

  Hello

  The 3rd cable does not for me but maybe it's for BT. as far as I know that you need to connect only 2 cables to the Board of Directors to use the Wlan. The performance has nothing to do how many cables are connected.
  The white cable usually goes to the hand and the black to the auxiliary voltage

• Sat Pro 6000 - need DVD decoder

  I've owned my trusty Satellite Pro 6000 for nearly 6 years. I had to use the recovery disks, then reformat back to factory settings. Now, I am unable to play DVD? s, I wonder for the decoder.

  Why this request is doing now? This can be downloaded?

  Do you mean on original DVD? What application you use to play movies on DVD?

• Satellite Pro 6000 RAM upgrade problems

  Apologies for multiple - originally, I put this in the Satellite rather than the Satellite Pro series Forum.

  I have an old Satellite Pro 6000 that has 256 MB of RAM in it, and accordingly, as he tries harder sound, it is not the fastest machines.

  I want to increase the RAM to 1 GB, which I believe is the maximum and 2 sticks of memory of 512 MB PC133 CL3 3.3V, which I think should work fine.

  However, I tried to install either as a pair or separately, with the 256 MB of RAM, and when I put the memory in, the PC resolutely refuses to start. The lights of power lights, but it is only it works.

  I put the original 256 MB of RAM in the slot, and it works fine.

  I'm something wrong or missing something?

  Any help appreciated gratefully.

  Hello

  > Am I something wrong or missing something?
  Of course, you use the memory bad or is not compatible!

  Initialization not after an upgrade of memory is a common behavior if the modules are not compatible or do not work.

  You can upgrade the memory to 1024 MB (2x512MB) max and page Toshiba should run these modules:
  PC133 512 MB (PA3108U - 1 M 51)
  PC133 256 MB (PA3086U - 1 M 25)
  PC133 128 MB (PA3085U - 1 M 12)