What are TCP IP ports are used by CRIO

MIO

Which ports or a range of ports are used for the cRIO by OR for:

LabVIEW development system

OR MAX

RAD tool

Network browser OR

Manager of distributed system of NOR

Configure us the firewall settings and VPN connections and understanding these elements is very important to us.

Thanks in advance.

There are a few posts about this already on the forums - you might find them useful:

http://forums.NI.com/T5/real-time-measurement-and/exactly-what-ports-are-used-to-communicate-with-a-...

https://forums.NI.com/T5/real-time-measurement-and/cannot-access-cRIO-behind-NAT-firewall-with-Max/t...

I believe that UDP (beforehand) and TCP (for communications) is used by MAX.

You might also consider using a tool like Wireshark network sniffer to see what links are used.

Tags: NI Software

Similar Questions

  • Exactly what ports are used to communicate with a cRIO?

    Can you provide this information (or point me to it). I want to implement a cRIO remotely through the internet, and I put it behind a firewall. I would like to know exactly what ports need to be forwarded to allow MAX to connect (when I say that it connects directly to a URL).

    Thank you

    Chris

    Chris

    Show This Article in the Knowledge Base that software ports OR use. Please refer to the Kb for more details.

    The cRIO, guests using

    44525 (discovery of target device Ethernet)

    3079 (front of LabVIEW RT TCP connections)

    3580 (OR Locator Service)

    80 (LabVIEW Web server)

    96 (FPGA compile server)

    (3537 if using VISA)

    (81 if you use Internet toolkit)

    (20 and 21 If you use FTP server).

    What are the Ports I need to open on my Firewall for National Instruments software products?

  • What are the ports used by the Cisco VPN Client?

    Hello

    I need to open my outgoing traffic on my firewall to allow two interns (LAN) Cisco VPN Client to connect to their Internet virtual private network.

    I already opened the port 500/UDP, but they are not able to connect. If I open all outgoing ports, they can connect.

    What are the ports used by the Cisco VPN Client?

    Thank you

    You need to open:

    UDP 500

    ESP protocol

    You must also open the UDP 4500 port (if using NAT - T).

    In addition, if the clients are connecting to a VPN 3000 Concentrator series and it is configured for all other options of NAT-transparency, corresponding ports must be open. By default:

    1. If using IPSec over TCP 10000, then open TCP 10000.

    2. If using IPSec over UDP 10000, open UDP 1000.

  • What are TCP/UDP ports must be open for version 4.8 of the VPN Client?

    What are TCP/UDP ports must be open for Cisco VPN Client version 4.8 working?

    Thank you

    Normally, you need the following ports and Protocol:

    UDP 500

    UDP 4500

    ESP

    In this case, you are using IPSec over TCP, you must open the port TCP 10000 or any other port that you want to use for (its configurable) IPSec connections.

    -Kanishka

  • Database link - what ports are used?

    I'm trying to create a link of database from a very locked down server (A database) at database B, which is on my internal network.

    Can someone tell me what are the ports I need to open in the firewall for a database link works correctly? My B of the database instance is an instance of XE running on the default port 1521.

    Thank you

    Hello

    Try this in your source and XEPROD it is your right to target db

      sqlplus user/pass@XEPROD
    

    When you create a db-link use any connection string and also how is your configured sqlnet.ora you may need to use. WORLD in the name of link

     CREATE DATABASE LINK "LINK_NAME"
     CONNECT TO USERNAME
     IDENTIFIED BY "password"
     USING '(DESCRIPTION =(ADDRESS_LIST =
                          (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT = <1521 or whatever port you are using)))
                 (CONNECT_DATA = (SERVICE_NAME = XEPROD)))';
    

    Hope this helps

    Concerning

  • What ports/servers are used to display customer (PCoIP)

    I have spent hours reading on this subject and can't understand how it works.  Is there someone who can explain in a few sentences what ports are used in this scenario and what the connection through servers?

    Our facility:

    broker for connections 1 view (no security server)

    All clients use PCoIP

    In administrator mode, I 'Use' secure tunnel connection to the office and "Use PCoIP PCoIP gateway secure connections to desktop" both died. In my view, this means that clients connect directly to the correct virtual machine?

    Most of the clients are on the local network, but we also use ipads to connect through our vpn.  In the vpn configuration, I welcomed ONLY access the connection Broker: 443 yet ipads are able to connect to their desktop very well.  I don't understand how this is possible, unless the connections between the client and the virtual machine are always routed by the broker for the connections.

    Y at - it can a document somewhere that shows how these connections or someone explain this please?

    Thank you.

    Your VPN must allows for 4172TCP and 4172UDP in both direction.

  • What are the different ports used by BTA?

    Having recently had 'fun' to getting a load agent working in our secure local network, I was wondering if someone could clarify what are the different ports to/from?

    I am aware of the following:

    9001 actually mentioned when you configure a load agent
    1099 mentioned when you configure a data collector
    1098 -? necessary for the agent to load (I would hazard a guess to this also being the collector of linked data)
    4444 -? necessary for the agent to load
    7071 -? necessary for the agent to load

    I had also the following ports was told by looking at similar issues (but they didn't need opening in my recent exercise):

    7073
    8083
    8088

    I also suggested that information added to the knowledge base article (Doc - ID: 787226.1) because they may need to open on the firewall.

    Ian

    Oracle.port.RMI = 4444
    Oracle.port.http = 8088
    Oracle.port.empstart = 9001
    Oracle.port.uil2 = 7071
    oracle.port.dataCollector = 7073
    Oracle.port.WebService = 8083
    Oracle.port.JNDI.rmi = 1098
    Oracle.port.JNDI = 1099
    Oracle.port.HTTPS = 8433

    You can change the ports

    - \EmpAppServer\server\default\conf\oracle.propertie

    The following ports are used between load tests of Oracle for Server Web Applications and the Machine of the Agent itself:

    * 9001 (the agent communication port)
    * 1099 (Datacollector Comunication Port)
    * 8088 (for running scripts OpenScript)

    Concerning

    Alex

  • I just bought an Acer Chromebook OS CB3-111 a few days ago. What are the common uses two USB

    I just bought an Acer Chromebook OS CB3-111 less than a week ago. What are the common uses of the two USB ports and the port of SD memory card?  Thank you for your comments!

    I have a bunch of books (epub and pdf) on my SD card right now, I also have music and I expect that I could put videos on it as well. I don't expect to be able to develop applications or to store their internal data on it.

  • What are the default ports in the firewall of the ESX ESX Server groups

    Hi all

    Greetings to all!

    <! [endif] > <! [if gte mso 9] >

    I'm new to vmware. I have some experience in Linux. I need to work with EXES

    Firewall. Can someone help me with firewall ESX.

    Suppose for example, that if I need to block some ports or open a

    port to a particular network. (Clamping server)

    And I would like to know what groups of ports in ESX

    Server and what are the default ports

    ESX Server available groups

    While the physical switches have ports to which you can connect, virtual switches have groups of ports. The types of Group 3 port are machine virtual port group, port console and vmkernel service groups

    Méhul

    PS: If you find answers correct or useful, please consider giving points!

  • What are the ports need to be open?

    I'll put up my fmis to stream video through rtmp and http.

    I'm on a network locked.

    What are the ports must be opened to allow people outside the network access to the rtmp/http stream?

    Am I correct to say the only port 80 and 1935?

    Yes... 80 and 1935 is what you need for RTMP and HTTP Proxy downloads connections. If you want to use RTMPS, you must also open 443.

    If you want to be able to use the administration service and the administration console, you must also open 1111

  • Wat is the use of ports, that those who are used to EMconsole

    Hi all,.

    Could someone tell me please
    1. the use of the ports used for the dbconsole officer, rmi and jms?
    2. If I block these ports can I use dbconsole?
    3. What are all the ports used for the database as listener http dbconsole, dbconsole agent etc, and use of these.

    Thank you and best regards,
    Sagar Maram

    You need to read the docs she...

    JMS?

    Here you go

    http://download.Oracle.com/docs/CD/B14099_19/Web.1012/b14012/JMS.htm

    RMI?

    http://download.Oracle.com/docs/CD/B14099_19/Web.1012/b14012/ormi.htm#JISVC611

  • What are the KEYstroke (s) used to CLOSE the current tab in the web browser?

    What are the KEYstroke (s) used to CLOSE the current tab in the web browser? I hesitate to use a mouse where can I use sequences of keys, as the mouse is a much slower process. Indeed, to find a list of all the main features that can be used in Firefox, for example ALT + S, followed by R (or several times) and the ENTRANCE used to restore the last browsing session; or CTRL + F to search for a specific word or term? Thank you.

    CTRL + W closes a tab at a time. It also closes a window if there is only one tab open in this browser.

  • What are the applications used in the IPAD pro video experience

    What are the applications used in the video to experience pro IPAD?

    Do not know exactly what video you want to say, but this site Web lists all the applications one by one.

    http://www.Apple.com/iPad-Pro/experience/

  • What are the advantages and disadvantages of using iCloud drive (or other Cloud services) compared with iTunes game against external hard drive, Solid State etc. to store my songs iTunes, playlists, ratings etc?

    First question: what are the advantages and disadvantages of using iCloud drive (or other Cloud services) compared with iTunes Match against Solid State external hard drive etc to store my songs iTunes, playlists, ratings etc?

    Please let me know what are the alternatives for storage of my songs, playlists, song etc. other than iTunes game ratings ($ 24.99 / year)?  Is there a way to store all my songs with my song ratings, playlists, etc. with a CD song quality? Most of my (currently 130 GB) songs on my computer are CD quality that I prefer to keep as well as my notes of each song (i.e. 5 * vs. 4 * etc.), playlists, groups (music, classical, popular, country etc.).  What are the advantages and disadvantages to store my iTunes songs while CD quality with my personal notes, reading lists, groupings in the cloud?  ICloud of Apple Drive ($ 2.99 per month or $36 / year for 200 GB) would be the best way to automatically update and maintain my rankings iTunes personal including the future editions of the song etc or using Amazon, IBM, Microsoft etc cloud or an external hard drive SSD would work as well and maybe cheaper?  I currently have my iTunes on a PC of 2007 with vista (I use a 1 8T Western Digital external upward by car for my personal info all over HP, songs, photos etc. which is currently close to 170 GB) but also have an Apple i-phone 6 & I Air cushion.  Although I did not need to have all of my music with all their sides, etc. available on all of my devices at all times as iTunes game, I still would have easy access to information on both my PC and my iPhone or iPad?  Thank you.

    In my opinion?

    I back up my data to an external drive for several reasons.  The first is my data - if I put on the cloud, someone else has control over it, they can see what I have and change the preferences to what they see of marketing.

    Almost as important as that - if I had to rely on the cloud whenever I wanted to update my playlists on my phone, I need a better internet connection I have now (working at sea).  To get the best out of the cloud, you need a solid link to home, work or mobile.

    As a spin-off - I hate the fact that Apple take away a feature in their software updates and then allow an app to be sold in their store to replace this feature - or worse still, some features that were available before the updates are now "cloud only."  And Yes - you have to pay for the cloud.  I like most of the people do not appreciate the 'accomplished fact. "

    From the back of the external hard drive ASI downside, is that to be safe, you need to store outside in a separate computer place.  If keep you them together, if one is lost, probably, they are both.  That is to say for me a full backup before you travel, then a new upward as soon as I go home.  Downside is how much data may be lost between the two back ups if I needed to restore.  For me, its worth the risk.  If I was away and say had bought a ton of new music and couldn't go home anytime soon, I can always head to the store and buy a new external drive, they are massively expensive.  Even if my computer has to go for repair and my remote is to halfway around the world - I want to buy a new one.

    Now, some will say that once you buy a new external, you spend more than you would on a cloud subscription.  It's true, but in the 6 years following the purchase of Mac that I've only had to buy a new external once - so with a little luck and planning - it works.

    I left took well - I am not a subscriber of cloud, nor do I want to be.

  • What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

    Hi all

    I am new to TestStand. Still in the learning process.

    What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

    Thanks in advance,

    LaVIEWan

    I'm sorry... I discovered that... its not at all possible to pass data to another sequence using variables... it must be through settings... once again I apologize for the display of such a stupid question

Maybe you are looking for