What are the causes my print spooler continues to operate, and quickly stop again when I restart it? Lexmark P4350 - Windows 7 Edition home premium

Similar Questions

• What are the causes of some pages not to load on an individual PC when the site is OK and the other PC can access?

  Hello

  8.1 to win

  I recently made some changes to my internal network and all of a sudden attempts to access Bing give an error. My network is:

  

  When I connect either wired or wireless to wireless router I get to Bing.  When I connect to the router cable regular I get this error message:

  

  As I connect within seconds after each attempt, I don't think that the site has a problem.  For some reason, my new network connections have introduced some problem with the connection to Bing.  I use a new cisco wireless router.  When I put my old Linksys router in place, the problem does not occur.

  The problem only occurs with Bing.  I can connect to this forum very well, as well as MSDN and all other Microsoft forums.

  Yet once again, the problem is to the wired connection on the regular router.

  Additional info after writing this post: The problem is slightly different, so the title of the position was changed and this-more information can be found.

  Even more information after writing this post:  I installed Google Chrome to see if this is a problem in Internet Explorer.  No, the Chrome has a problem as well.

  I note that my ISP has given me a new IP address in a completely different set of addresses.  I only mention that in case it triggers a memory on connection issues.

  Hello

  I think I found the problem that was affecting my system.  It is not the solution for everyone, but if people are looking, it is at least a possibility.

  In my router, there is a place to manually enter the server DNS IPs.  I added specifically to my router the IP addresses of my ISP's DNS servers in the preferred and secondary IP addresses.  It will take positive time this solved my problems, but it seems to hold.

  Previously, I relied on the router to forward DNS queries to the next router in front of her which is effectively connected to the ISP (as shown in my picture).  But this does not seem to have been reliable, it seems so specifically direct the router to directly access servers DNS of the ISP have mitigated the damsels of DNS.

  Best regards

  Alan

• What are the causes my screen to instantly display several small pages?

  What are the causes my screen to instantly display several small pages?

  Your username appears to be rather ironic.

  Given the richness of the information you provided, I guess, whatever the version of Pages that you use, you've opened the model selector.

  Peter

• What are the causes of error - OR-XNET: the NOR-XNET driver is no longer can communicate with the device.

  Hello

  I use X-NET-PCI8512, OS: Windows 7, C++ (middle of the QT interval).

  I'm pooling of card data (StreamIn member function) to ~ 100 Hz. card reading time (ReadStatus) to ~ 100 Hz.

  After about 40 min (depends on the amount of data in) I get this error:

  (Hex 0xBFF630B2) The NOR-XNET driver cannot communicate with the device. Solution: Make sure that the device was not removed from the computer.

  What are the causes of this error?

  Thanks in advance,

  Aviad

  Hello aviadCielo,

  When you get this error, what does do to make it work again? If you restart your program, start all this work?

  Secondly, what version of NOR-XNET do you use? It's maybe a software problem that could be resolved by upgrading to NOR-XNET 1.6.

  Finally, can you reproduce this problem with a simple program? If so, you can join the program you use?

• When I close a program, it seems that the page is molten! What are the causes that

  Just as I said, when I close my Internet explore the page looks as it melts down.

  When I close the Office computer looks like it is melting.

  What are the causes and how can I fix what is wrong

  I ran mcafee and malware programs.

  I have compaq presario v5000

  Windows xp

  32 bit

  do not add ons running.

  I don't see how someone can offer you promising ideas knowing more about your system.  The best you can get is speculation on what might work sometimes maybe. All we seem to know is what sort of a Presario V5000 with XP (there are a lot of different V5000s).

  It worked better in Mode safe or clean boot?  Even if it did, this does not your problem, unless you want to run mode without failure or boot for the rest of your life.

  If you restored to the factory settings in the past, then you have all your video drivers updated?  Chances are good that everything that comes out of the plant is outdated when it leaves the factory.

  If I were you, I would first take a look at your specifications and make sure that your video drivers are up to date.

  Should be considered ditching of McAfee (since it's a famous memory and CPU hog) and replace it with something with a smaller footprint like Microsoft Security Essentials (MSE).  You can simply use the McAfee uninstaller install temporarily and see how things work... you can always reinstall later if you are forced to do it, right?  (but I wouldn't).

  If you still have the problem after all and the verification of your video drivers, check the properties of your system performance (especially the Visual effects) Options.

  Why don't you do this so that we can see what you have:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  For video device and driver information, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• Windows closes programs as it is to melt! What are the causes that

  When I close an Office program looks like it's melting!  Even when I turned off the computer.  What are the causes that?

  Thank you

  Deb

  Hello arcand1772,

  Thank you for the question!

  It is disheartening to know that have problems you while closing programs. As I understand it encounter you problems during the closure of the programmes.

  1. the is the problem with a particular program?

  2. were there any changes (hardware or software) to the computer before the show?

  Post a screenshot of the issue to help you best.

  How i: post a screen shot on this forum? -Microsoft Answers

• What are the causes videos stop and start again during the transmission?

  What are the causes videos stop and start again during the transmission?

  Hello

  You can update the latest drivers for the video card and check.

  Also perform the clean boot and check:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Let us know the results.

• What are the causes of silverlight N8007 error code.

  What are the causes of silverlight code error N8007?  I have already been able to view the contents of netflicks, but no more.  He has always played by this "Silverlite" program or a recent change?

  Thaks in advance for your answer.

  Hi GaryFelder,
   
  Post your request in the Silverlight forums for assistance on this issue.
   
  Visit the following link to do the same thing:
  http://forums.Silverlight.NET/

• What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  Hi DaddyJeff,

  1. don't you make changes before the show?
  2. are you referring to the cursor in the area of user password on the login screen of Windows?
  3. when the cursor goes missing, the mouse pointer works on screen?

  It is difficult to say what is causing this problem. If the mouse pointer freezes or stops working, then we recommend you to reinstall the mouse. To do this, try the following steps:
  a. sign in to Windows.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of objects, expand mice and other pointing devices.
  d. right click on the sub element and click on uninstall.
  e. unplug the mouse and plug it back.
  f. the Device Manager, select an item in the list, click the Action menu, click scan for hardware changes.
  g. check if the mouse is detected, if so, then install it.

  See mouse USB which is connected to a USB 2.0 hub is not detected by Windows XP

  
  Note: if the problem persists, restore the computer to an earlier time. See How to restore Windows XP to a previous state

  Visit our Microsoft answers feedback Forum and let us know what you think.

• What are the causes of sd/mmc instead hired san disk

  Card SdHC (San Disk) used to store images from digital camera, when inserted the green light turns on but does not work

  visible on e-machine network (vista 32) system. What are the causes of sd/mmc slot is not to detect the san disk.

  Hi mrpitiful,.

  ·         Is it a laptop or a desktop computer?

  ·         You have built in card reader if it a laptop?

  Check to see if the following is useful.

  Method 1: If you use an external card reader, then try using another.

  Method 2: See the following SanDisk article if it is an internal card reader.

  Computer (with internal card reader) or a digital camera fails to read 4 GB, 8 GB, 16 GB, or 32 GB SDHC card

• What are the causes the limit 2 Gig Ram in m1170n Media Center computer?

  What are the causes the limit 2 Gig Ram in m1170n Media Center computer? It can be corrected? Makes for a much slower PC than it could be. I can update only 1 3/4 Gig and yet it can begin.  I tried the bios update that is available on this site, but it doesn't seem to change anything. It would be much nicer I could date within the limits of the operating system. 4 GB. Don't know what I'll use this 4 PC yet, but this could be the deciding factor.

  Here are the specifications of your HP Media Center m1170n desktop computer and its card mother PTGD1-(Puffer). Based on the specifications, this model has a maximum HP approved limit memory 4 GB (4 x 1 GB = 4 GB). The problem you are experiencing is perhaps due to incorrect memory modules, modules of memory defective or damaged, defective or damaged memorty slots or a very defective or damaged motherboard.

  Run the available at startup BIOS Diagnostics or download "memtest86" and create a bootable media. Then, run the test on each module individually, in the same housing. If all modules pass, rerun the test... this time by adding an additional module... Repeat until all slots are filled and all modules of memory are used.

  Please post back with your results.

  Please click the White Star of KUDOS to show your appreciation

• What are the causes of temporary profiles?

  What are the causes and how can I get my original profile once again?

  You may find that the problem is temporary and you connect properly on your next reboot.

  Advice on that is in difficulty a user profile damaged and this may also be of interest the user profile Service has no logon. Could not load user profile as you will see, there is the coincidence of the AV utility read the profile at the same time that Windows 7 trying to read and cela can cause a one-time default to a temporary profile.

  Even if the problem goes away once you are back connected with a suitable profile, create two admin accounts to make sure that you have a good chance to be still able to enter the PC all that is corrupt.  If your user account profile is corrupt, you use an admin to fix things, if an administrator account is corrupt then you use the other admin to fix things, including the creation of a new account admin spare.

• Does anyone know what are the causes for the (!) symbol in red in all my icons of file work?

  Does anyone know what are the causes for the (!) symbol in red in all my icons of file work?

  Most likely your sauvegardΘ (backup status indicator) program, maybe Norton, McAfee or Mozy, indicating the file not saved yet.

• What are the causes of streaks in the areas not related any cloning with photoshop elements 8 or 11?

  What are the causes of streaks in the areas not related any cloning with photoshop elements 8 or 11?

  You can post a screenshot showing the screen problem?

• How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  * Original title: startup

  How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  Hello

  I understand you want to learn about programs, you should start your Windows startup. I will certainly help you to question.

  When you start Windows by using a normal startup startup, several applications and services automatically, and then run in the background. These programs include the base system, antivirus software, utility applications processes system and other software that was previously installed. These applications and services may cause interference when you install or run a program.

  The system configuration is a tool that can help identify problems that might prevent Windows from starting correctly. You can start Windows with common services and startup programs turned off and then reactivate them, one at a time.

  I suggest you to refer to the links below and check if this is useful:

  Using the Configuration System (msconfig)

  Perform a clean boot to determine if background programs interfere with your game or program

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.