What are the consequences of blocking of monitoring sites that I find in the add-on?

Similar Questions

• If 'error exe win32 not valid' and the program runs what are the consequences

  running 32-bit applicaation on win 7 and receive "not valid win32 application" error message.    the application continues and it seems to work, but what are the consequences of running the application?

  Hi Wayne,

  Get the error: not a valid 32-bit application can have several origins:

  I have listed some of them below.

  File is corrupted, bad or missing:

  Ø If the hard disk is damaged or bad, it can cause work programs to fail, either because not all data can be read from the hard disk the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.

  O if you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:

  Ø If you try to run a program that is not designed for your version of Windows, you can get this error.

  Ø although many old programs designed to work in older versions of Windows work with new versions of Windows, unfortunately, not all programs will work.

  O if the program is an earlier MS-DOS program or start program Windows, you will get this error.

  Ø If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it does not work and generates this error.

  File is a virus, worm or other malware file:

  Ø this error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.

  O if the file has been checked and is clean, it is always possible that the virus protection program or another program installed on the computer is causing issues when installing or running the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.

  Hardware incompatibility:

  Ø If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.

  O download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Hope one of the suggestions above will help with your problem.

• What are the reasons for blocking a thread?

  There is a question in the PL/SQL forum, that as is often the case, is not to the point. I asked for more information, and the OP provided. Now, I know what the OP really intends to ask, and I can answer.
  
  Or at least I could answer, except that the thread is now locked: ' this thread is locked - replies are not allowed. " According to the FAQ, this means that a moderator has locked the question. But why? Why block this issue and not the other threads of the same buggy? If the lock is due to an offence on the part of the OP, why not just delete?
  
  In short, why hang on to a question without a question? Is it zap and slightly reduce noise in the forum, or unblock and allow for a response.
  
  At the very least, a policy of blocking issues without apparent reason or explanation undermines the role of contributors.
  
  Cheers, APC
  
  P.S. [url https://forums.oracle.com/forums/message.jspa?messageID=10025314#10025314] here's the thread in question. OkF
  
  ---------
  
  Follow-up: I noticed that the user has at least another locked thread. So maybe there's something in their behavior that deserves imprisonment? But they have other threads that are still open. So, my main point remains valid: what are the reasons for blocking a thread? Why not just ban the userf and or delete questions?
  
  Published by: APC on December 11, 2011 16:48

  Gasparotto N wrote:
  I see, but as Andrew said, there is no evidence in the taken only a single thread without going through the history of the user all the.

  Nicolas.

  Agreed. If I block a thread, then I often put a message to say I'm locking it and the reason why and possibly a link to other threads of the same question if it's because of the duplication of the op.
  It is not that often that I have lock son well.

• What are the consequences of a trigger in peaktime compiling in a data base.

  What are the consequences of a trigger in peaktime compiling in a data base.

  Compilation of a trigger (table), should temporarily be a lock on the table involved.
  Therefore, cannot exist any current transactions involving the table.
  As a trigger is an object of higher level (dba_dependencies - wise), the compilation it does not cancel other objects.

  That said: I would not recommend doing so for peaktime...

• What are the advantages and disadvantages for the largest block size and

  What are the advantages and disadvantages for the largest and the smallest block size block size?

  Smaller size of block

  Benefits
  Relatively large GoodHas air space due to metadata
  (i.e. block the header).
  Not recommended for the outline. He could only
  be stored for each block, or worse, a few lines line
  If one line does not fit into a block, for small lines with a lot of chance of chaining
  access.
  Reduced block contention.
  Disadvantages
  A relatively large air space due to metadata
  (i.e. block the header).
  Not recommended for the outline. He could only
  be stored for each block, or worse, a few lines line
  If one line does not fit into a block of chaining.

  Larger size of block

  Benefits
  Lower overhead, so there is more
  room to store the data.
  Allowed to read a number of lines in
  the buffer with a single I/o cache
  (according to the size of line and block size).
  Good for very large or sequential access
  lines (for example, LOB data).
  Disadvantages
  Waste of space in the buffer cache, if you
  random access to small lines and have a large block
  size. For example, with a size of 8 KB block and 50
  size byte of the line, you will lose 7 950 bytes in the buffer
  When you make a random access cache.
  Not good for the index used in an OLTP blocks
  environment, as they increase the claim to block
  on the leaves of index blocks.

• What are the consequences of the NTP servers configuration in EBIPA to Interconnect bays?

  Hello

  I want my VirtualConnect devices in a c7000 G3 case addresses EBIPA to install.

  I see a difference against the parameters of EBIPA for peripheral bays: settings in the EBIPA bays to interconnect, you have the option to add NTP servers.

  What happens if I Don t write NTP servers in there? Where the VirtualConnect will get date/time information. I find nothing in the manuals from HP.

  What are the recommendations, to write about the EBIPA settings the same NTP servers used for each speaker?

  Thank you

  Hello diegomartin,

  You really need ot ask this question on the HP Enterprise business (Forum Pro) community.

  Here is the link to the server of this forum section. I guess you'd look in blade systems?

  http://h30499.www3.HP.com/T5/servers/CT-p/ITRC-122

  You may need to re-register to post here.

  Good luck.

• What are the consequences?

  What are the ramifications of the popular burn-in timecode rendering with an additional track on the timeline vs via the menu on the encoder?

  Even for a "bug" or a watermark?

  I was wondering what method do most people use and why.

  My problem with the addition of the timecode during export, is that we cannot succeed the timecode of the exported sequence, and is not always useful.

  Here is an example.  When editing together a wedding, I'll break it down into different sequences - getting ready, ceremony, formals, reception.  They all get combined into a single master sequence for final export.  During the review, I need to see the timecode of the sequence of the ceremony, not the master sequence.  Adding timecode to export does not have this possibility.

  Bugs must be crushed. Period.

• What are the inner workings of the grid in forms?

  Hi, I have some doubts, I want to know what are the inner workings of the grid in forms.

  1. how forms followed the value change in the grid?

  2. when we run the query that we will get the selected lines, then we changed some values in certain fields in the grid, how it follows the change in value? .how he knows the process is update or insert?

  It is this that my concept, when we realized the request forms will be store values in the tables with rowid.i thought a lot more, but I can't any idea on it.any help me?
  

  You just want to understand the functioning of the forms or you encounter some difficult techniques in certain areas?  If you have a hearing problem, please describe, and we can try to help.  If you try just to know how it all works, I would recommed referring to Forms Builder online help.

  In help, search for information on GET_RECORD_PROPERTY.  This part of the documentation provides a pretty good explanation as to what is happening and how to determine the current state of a folder.

  In short, when you make a change to a field that represents a recording of the db, a SELECT for UPDATE is issued.  This causes the recording to be blocked.  Actually change value, we monitor internally.  I won't go into the details on how we do here.

• What are the details of the 3-year warranty on Tecra?

  What are the details of the 3-year warranty for computer Tecra laptop w/r bad pixels? Toshiba gives no kind of guarantee of "zero pixel wrong" even for a limited period?

  Hello

  As in the previous mentioned announcement, there must be a certain number of dead pixels on the display in place of the screen.
  It s no matter if it s a s one or three years warranty.

  As far as I know during the guarantee period Toshiba will replace your screen if the number of defective pixels is greater at:
  -10 bad pixels to screen VGA (640 x 480)
  -15 bad pixels to screen SVGA (800 x 600)
  -20 defective pixels for screen XGA (1024 x 768)

  I found some useful documents FAQ on the Toshiba site.
  Please read these documents for yourself:

  I have one or more bad pixels on my screen, I can fix it?
  http://support.toshiba-tro.de/KB0/FAQ350079001NR01.htm

  What is the maximum number allowed and the type of fault of pixel your monitor LCD Toshiba can expose by 1 million pixels?
  http://support.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm

• Reinstall XP on Portege R600 - what are the necessary drivers?

  Hello

  I am plan to reinstall windows, since something (a driver/program/idontknowwhat) seem to access my hard drive at random times (often), which means that ever, it stops turning and still makes noise. It was already the case (but a little less than now) with preinstalled system, even with wdfrgmgr.exe disabled and without using a swap file on the hard drive, so since I don't know what are the causes (is - anyone here know?) and since it seems impossible to upgrade to an SSD, I'll just install a clean winXP install only necessary basic stuff (especially not all control panels).

  I would like to know what drivers from the Web site are essential and those that are not.
  I'll definitely install base drivers common Module, driver Display Driver LAN, HDD Protection Utility, Power Saver, his Driver, Touch Pad Driver, Webcam Driver, Wireless LAN Driver (Intel).
  I will not install (but maintaining install files on my disc for emergencies) acoustic silencer, Assist, Bluetooth Monitor, controls, cooling running Diagnostic tool, DVD player, Management Console, password, PC, PC monitor diagnostic, tool utility utility boot memory SD SD utilities, security help, SSD Alert, power utility Touchpad utility , USB Sleep & charge utility, utility zoom. I'm missing something essential (and obviously not in name) by installing is not it?

  * Now my other question: which with other drivers? I don't know what they are doing here is so my doubts since the following drivers: *.

  (1) pilot 3 G and 3 G RF power control utility: is this necessary if I never use it, or do not install the power utility will lose power (thus reducing my battery life?)

  (2) Intel Active Management Technology and Intel Matrix Storage Manager: is it necessary that the machine works correctly? I can't find the right information anywhere.

  (3) chipset utility: I am surprised it is not called driver... it is some control panel I don't need or is it actually a driver?

  (4) ConfigFree, hotkey wireless and Wireless Manager: my wireless internet will work without it?

  (5) display device Exchange & Hotkey utilities for display devices: these do what exactly?

  (6) microphone effect: is it only the echo canceller or also a necessary micro driver?

  (7) mobile Extension: what is it exactly?

  (8) trusted Platform Module: is it necessary to install this if I am not using any other explicitly related function?

  (9) public services: this product contains all I need to install the drivers? Or is it just a bunch of utilities like his name?

  Thanks in advance!
  Peter

  (1) you have not need drivers 3 G, if you do not use 3 G

  (2) Yes, you need to install these devices from Intel, they are important.

  (3) the Chipset driver is probably the most important of all drivers. Toshiba common modules is also very important. You must install these two before anything else.

  (4) Yes, we must still work. You can install the keyboard shortcut, so you can enable or disable Wifi on and outside

  (5) you need to install these, they support some features of the Fn key, so you can use an external monitor, etc...

  (6) I don't think that you will need. If you encounter problems with microphone, install

  (7) install the Mobile Extensions if you have a Port Replicator.

  (8) If you do not use the TPM encryption, simply disable it in the BIOS

  (9) you must install the utilities, so you can change the hardware settings within Windows.

• Qosmio F10-122: what are the pinouts of D-Terminal to connect the digital TV via HDMI

  I have the D-Terminal cable SCART, but this only works in analog (PAL) resolution.
  What are the pinouts of D-Terminal on nVidia FX Go5700 of GeForce to connect to a digital TV via HDMI and use higher resolutions?

  The F10 does not support HDMI port. It supports only the output port component.

  I've goggled a bit and found that you can use a HDMI adapter component
  There are also some adapters that support the resolution of the computer of the 1920 x 1200 px and 60 hertz
  So, you can connect this device to a monitor with HDMI port.

  Google for adapter * Gefen component and HDMI *.

  Good bye

• What are the benefits should the software Intel offers compared to Win zero configuration

  (Satellite M60, Intel 2200BG)
  A few months ago Intel released new software WLAN (a major problem for the security, etc.). Initially, there was a memory leak problem, but he was soon fixed. However, they always seem to be a resource hog: there is the CPU usage in the Task Manager on the cob of 10 to 20% every 5 seconds all the time, also WIFI turned off & off, overall performance is affected - this can be seen for example in the tests of hard drive.

  I noticed that in order to use windows to configure WLAN & then kill two switching processes (iFramework, S32EvMon (?)) eliminates this activity.
  Recently, new Intel drivers are offered by Toshiba also, so I'm about to reinstall them with the option "drivers only".

  Anyone know what are the benefits should the full Intel software offer compared to Windows zero configuration?
  As far as I know, monitor event S32 is supposed to improve coordination Intel WLAN and LAN, working together.

  The new package is about 50MB in size, while the former was 2MB.

  Hi Sammo

  You have already preinstalled new driver? The package is really about 50 MB and Intel PROSet utility.

  I can tell you that offers software Intel the same configuration options of Windows. Maybe Utility Intel PROSet is friendly and kind but designed WLAN Windows settings by using, you can exactly the same.

  If you have more info on the download package and installation please let us know.

• How to know what are the applications requested?

  I get notifications that my child asks permission to use specific applications.  But when I click on it, and on the page of queries - it doesn't tell me what are the applications, or lead me to a link so I can check.  I would like to know how can I know what are the apps on so I can decide whether to block or allow it.

  Thanks for your help.

  Hi Islandhomeschooler,

  We will do our best to help you with your concern about how you can give your child safely to the family's application.  To view and respond to requests, we recommend you follow these steps:

  1. On any computer, sign in to the Family Safety website with your Microsoft account.

  2. On the summary page of the family, under requests, click queries (number).

  3. To display all comments your child added, click the arrow next to the web address.

  4. Click the arrow next to Select a response, and then click approve for this account only, approve for all accountsor refuse.

  5. When you're done in response to requests, click Save.

  Let us know if you need additional assistance.

  Thank you.

• What are the connectors on the video card that comes with a hp pavilion elite h8 - 1280t?

  What are the connectors on the video card that comes with a hp pavilion elite h8 - 1280t?

  Standard card is 1 GB DDR3 AMD Radeon HD 7570 [HDMI, DVI, VGA via adapter],

  Thank you, I thought, but could not find a photo or a specification which connectors.   I need to order some cables to put monitors at long distance of the system units and wanted to make sure I ordered the good.   I don't have the system units or monitors but they are still in the pipeline of generation/ship.

  Dave

• What are the programs should run at startup

  Paltalk I still have started from. went to windows to resolve problems by saying that I owe a lot running at startup

  Hello

  These methods allow to check what you have running at startup and use only those you need. Many
  programs will load in a start-up but really they do not need to be loaded automatically
  to work properly.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7 http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Use advanced tools to solve performance problems in Windows 7 http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have
  Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
  you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity in
  in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: product Type of startup (registry/Startup folder), Command - Line String,
  Name, file Version, company name, location in the registry or the file system and more.
  It allows you to easily disable or remove unwanted programs that run in your Windows
  startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The
  Window Watcher says it all, reporting of any window created by running programs, if
  the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.