What are the options I have to 'in' sound on a new iMac?
What are the options I have to 'in' sound on a new iMac?
Almost all recent Macs I've seen have a Line In port which can either accept a stereo 3.5 mm to RCA, stereo input analog line or a Mini-TosLink digital connection for S/PDIF (2 channels). If you need more audio input or need to enter that is not as intensive machine - you will need to invest in an audio interface.
Tags: Professional Applications
Similar Questions
-
What are the options I have to upgrade the Wifi in the HP Pavilion Notebook M7-1015DX
The Pavilion M7-1015DX laptop I is equipped with a RALink RT5390R 1.1 802.11b/g/n wireless adapter. He would go only to 54 Mbps until I found a link to RALinktech to get an updated driver which allows me now to get 150mbps. But this is only half of what I can potentially get with my router. I did research on the other card options wireless adapter HP with 'compatible' with this laptop. As far as I see it, all are the same. They have only max to 150mbps.
The listed reference numbers are 655795-001, 675794-001, 657325-001 670691-001.
I need a replacement of the wireless network card that can achieve 300mbps using 802.11n. All HP part numbers I listed are capable of 300mbps, or are there others that I can look at and buy?
With or without the bluetooth feature, no matter, I just need 300mbps talk to my router NetGear dual band.
I had the adapter wireless Intel Centrino Advanced - N 6230 works with the correct drivers now on this series of portable M7.
Also note: it's just a card Intel Centrino ordinary, not the ch (from what I can tell) and without a label to the HP part about this number.
HP had the pilot throughout their download section of this wireless card.
Download SP58641
Wireless Intel, Intel PROSet and Intel my WiFi for Windows 7 drivers
The installation may or may not be delicate on your end. It was for me and the package would not install right. Go to the real folder that it expanded the installation files, and go to the win7\S64\Install folder and run Setup from there.
The installation takes a few moments, so be patient. If Device Manager is open, you will see the detected devices and appearing as the drivers are installed. Once installation is complete, you'll see a map of Bluetooth radio and at least 4 new entries under Network Adpaters.
I am now running at the full 300Mbps, on 2.4 Ghz and can easily connect to 5.4 Ghz on my router Netgear Dual Band, but at 54 Mbps. (But I can probably change the channel on the router and get a faster connection speed.)
I strongly suspect that the 6230 model is not the only one who can work on this laptop, as the driver of HP is not specific to what model numbers of the adaters wireless Intel Centrino Advanced-N, then you might be able to run newer models, since we now know that this series wireless adapter is in the white list in the BIOS.
-
What are the options for 3 bit for Hw_Arm_Sel in PCI-6601 field
Hello
I'm programming our own driver to operate the PCI-6601. For our application, we need option arms material. I know, it is possible to use 2 counters for this, but NEITHER-TIO also supports hw_arm. Although it is not explained in the registration document at all, after some tedious verification in the DDK examples I found that the pieces are in the Gi register metering mode. I know that the position of the HW_enable as well as the position of the 3 options sellect bits PIN. What I don't know is what are the options of 3 bits for Hw_Arm_Sel field. I contacted the support NEITHER, but received no support. How can NEITHER sell boards and when a customer who doesn't use LAbview or Measurement Studio, or DDK, but implements its own driver is then so arrogant at least of NOR? Also, how can OR publish only a part of the records of the Board of support and when a customer contacts and request for some records do not get supported at all? I can't predict the missing records, and he is professional enough to document comes in part from records of 660 x Instruments. And, upon request, you have nothing.
I hope that someone from the community are aware of this Hw_Arm_Sel 3 pin option. Otherwise, there is just one option of the error and the trial. Or simply throw away the jury.
Dr. Kirco Arsov
Hey, sory for the delay in my response. It works and it works very well with the description of Joe and Joe, thanks for your great help. I greatly appreciate. Now we finally also have this option as we wanted it and it works fine.
-
Change HDD to the SSD, what are the options?
Hi guys, new to the forum, I just bought a thinkpad x130e during a sales event on one of the local retailer, pretty excited, because I like the rugged design.
I am looking to upgrade to 320G HDD for one SSD 128G... but I have no installation disc 7 windows very practical, so, what are the options for me to install the operating system (windows 7).
I don't know if there is a way to transfer the whole of the SSD HARD drive? is there a trick to perform? or quite simply, I just bought the new copy of windows?
COS, I noticed that I have a windows7 pro product key at the bottom of my thinkpad, I kinda don't want to lose money.
Help, please...
You don't need to buy another copy of Win7. You will need
1 SSD. It has to be is not 7mm thick, the most common 9.5 mm thick.
2 USB box for your HARD drive,
3. software to "clone" the content of your disk to your SSD. Acronis True Image is a well-respected package that does this. There are also a few free utilities that can do this, however, I'm not familiar with them.
Procedure:
1. move the HARD disc on the outer envelope.
2 put the SSD in the X130e.
3 reboot from the HARD disk. (You need to interrupt the boot with the blue ThinkVantage button to specify).
4. install Acronis (or equivalent).
5 RIP clone disk. You will have to tell the software how you resize partitions because you go to a smaller drive.
6 restart from SSD.
-
What are the options for p-1030 pavion with Windows 7. I still need a fax of legal documents?
I would like to add a modem fax boarding card. Is this possible with windows 7 or HP?
Linda, welcome to the forum.
I suggest try Windows Fax and Scan (Control Panel / devices and printers / Fax) to see if it does what you need. It allows to send and receive faxes without a fax machine. When you click fax it will open and give you instructions on how to configure the application.
Please let us know if this solved your problem or not.
-
In the Device.xml file, it starts with the tags of the os. Each os has a memory attribute. What are the optional values for the attribute memory?
Can we really control the memory for the simulators?
0x85000F03 0x8C000F03 0x87000F03 0x84001503 0x86001503 0x04001507 0x0F001507 0x0C001404 0x0D001404 0x0E001404 0x0D000D04 0x16000D04 0x05001504 0x07001504 These values refer to specific hardware configurations are simulated. They should not be changed.
-
Our company is buying 14 items first. What are the options to purchase necessary on 6 different PCs and how much it costs?
hisashiy
This isn't Adobe. Rather a user to user forum. You must contact Adobe Store Sales for the information you are looking for.
With it, you will discover licenses in volume compared to purchasing individual licenses. On the individual side, Adobe allows the 'client' use the same bought computers activated serial number on no more than 2 of the 'customer' and then not use both at the same time.
Premiere Elements is not sold on subscription, as are the applications under the creative cloud.
Please see the Adobe web site, or the following link contains the contact information you need.
RTA
-
disk not certified: what are the options
I just installed a spare drive in my 2900 PERC 5 / i I thought me certified, but is not. It needs to be a hot spare for a RAID 5 configuration. What are my options? It shows as 'foreign' is the physical drives. The only available tasks are blink and unblink.
Thanks for any advice.
PS Maybe I should go ahead and order a CERTIFIED disk...
WD blue is a desktop drive and not would not have been configured on the server of Dell.
If it's showing foreign and you do not have the option to turn it off, then the drive is bad or the drive is not compatible. If your other are indeed blue (same firmware), then it's probably a bad drive. You won't be able to do something with her in a foreign State.
Maybe you have already disabled the foreign configuration. It is displayed when you try to configure a new VD? Is it always show on the screen of physical disks after doing a refresh on this page?
-
I have to register my material from microsoft driver and what are the software application, that I need to present, in the case of printer WHQL? I thank in advance for your kind reply.
Hello ABILASHK,
The following link provides an overview of Windows Logo Program for hardware:
Program Windows Logo Program for hardware: overview
Best regards
Matthew_Ha
-
Startup disk has failed - what are the options for replacement
I have a Dimension 8400 BIOS A05 running (if I can remember you corrrectly). The SATA C drive supplied with the system crashed recently and will no longer start up. I tried various diags, but they all fail. I also had a USB drive adapter to try to access the drive from another computer... the disc turns, but I do not see the drive.
I want to know what constraints and options are there in the choice of a replacement drive? (I wonder if I am limited on ability. The original drive is a WD740GD-75FLA1 (74 GB). Could I replace it with a SATA capacity more (I don't mind if the replacement is a WD drive again or not.)
And, keeping in mind the BIOS, I must update that when I replace the HARD drive?
In addition, this good old machine still runs XP SP3 and I plan to switch to Win 7 at the time of the installation of the new disc. Points to consider regarding the choice of the player?
BTW - some time after the purchase of this PCI added a second drive hard - one 250 GB SATA drive. Do I need considered as in the choice of the total capacity of the disk online, I will be once the new drive arrives? Oh, and although I don't speak of this second disc - it works fine with the USB adapter so my problem looks like most likely to be a disk problem rather than say, a question of power cable or block.
Thanks in advance for your comments.
Andy
Any standard desktop SATA drive under 2 t fine - having said that, what you have now is a WD Raptor 10 K RPM drive. They are now called Velociraptor - if you are looking for this level of performance of the player, they are the only SATA 10 K rpm disks designed to use desktop.
-
Oct 2010 - what are the options for Cuda supported cards?
Hello world
I was just on the Adobe Web site, and although they say that they update their list of supported CUDA video cards, I saw no change
in several months.
at the moment (Oct 2010) what is the least expensive option available for options of CUDA enabled first?
Thank you all!
Dave.
Dave,
Historically, nVidia made only the Quadro cards, both the GPU and the circuit board. These were sold as cards Quadro NVIDIA and extent limited by the PNY brand name, but always manufactured by nVidia.
All other video cards were manufactured by a third party who has obtained the GPU from nVidia and the basic specifications were dictated by nVidia. This is the reason that almost all third parties that provide any GeForce cards, Asus, GigaByte, MSI, PNY, eVGA, Point of view, etc. have almost identical cards, which differ only by security, cooling and clock speeds, but in large part, these differences are minimal, apart from the guarantee.
Recently, nVidia has decided to enter the market of GeForce too, where he used is limited to of Quadro, but that has changed now. It is generally considered to be good for competition, but only a name more in the long list of manufacturers, so initially the impact will be low.
To select a videocard GeForce, IMO, it depends on the price/guarantee. The rest is largely irrelevant. Even clock speed is a minor, when the tests so far do not show one more advantage of hearts or more memory, but which may be caused by the childhood of the EMT support.
-
A friend of mine bought a computer with Windows 7 Ultimate laptop second hand on it and it has not been activated, and it is not a product key (even the old one is worn and unreadable). It was originally a XP system and it cannot be upgraded to Windows 8 because it is not compatible. Is it possible that he could buy a product key so that it is activated and genuine? I don't want him to enter in some affliction, and I feel partly responsible because I was the one who told him to do and was not with him to look over the first! I feel really bad, because it doesn't have a lot of money and I should have been there when it was sold. I have a Windows 7 professional full version box, but I really need for my own system. Are there any alternatives? Please give me some GOOD news because I feel really rotten over this. ) :
Thank you
BAT
The only alternative would be to buy a license Windows 7 Ultimate full version or a version complete edition cheaper such as Windows 7 Edition Home Premium and make a custom installation:
Full version-
Microsoft Windows 7 Home Premium
Full version-
Apart from that, the only other option would be to contact the computer manufacturer for a Windows XP Recovery disk. Which I doubt they still provide.
-
What are the sectors that have implemented firewall
1. What are all the sectors concerned on the implementation of firewall for the security of their data?
2. how much would a firewall cost (or) what is the affordability for a firewall?
3. the role of SMEs in the firewall application?
Hi Vinod Vr,
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum.
-
What are the options for assessment 8 Captivate for the following scenario:
I have a Captivate project with five modules, after each module, I want to have mandatory questions (users need to take and pass the course) and the optional questions (the user can jump, not included in the final grade). I use Oracle LMS. It seams Adobe changed not limited to 8 Captivate quiz preferences.
I would like to hear from experts before making a long option. I have the opportunity to cut the project in five projects children with 5 quiz (with mandatory questions). take the quiz option questons as a sperate projects and organize them (learning objects) in the LMS to play after each module, where usage can jump.
According to Lieve, since you need to mark the various questionnaires separately, you must have these quizzes of CP as separate files... which, as she says, is again a requirement of SCORM.
You could put all the CP files separate together in one package with "Mode Multi-SCO" of Captivate, but in all cases I've seen, the LMS breaks those separate lessons anyway... so you will need to use the LMS to open one, go through it, close it, had him marked, open the other by the LMS, etc..
The LMS would be the "Main file" Lieve mentions.
If you do not NEED to see the scores of each quiz, you could put all the sections in a main CP file... then all the quizzes section would be marked cumulatively to display an overall score in the LMS...
.. .and if your LMS supports 'interaction data' you could report on the real answers to each question to find out how well a user in each quiz section, but that again depends on your LMS capabilities (and that data meets the needs).
Overall, however, if you need to separate the quiz scores in the main LMS interface, each quiz must be its own file. This would be the case with ANY tool you use, be a limitation of SCORM.
-
What are the options do I have to save a file in Illustrator CS6
I would like to record parts of a file in the CS6 as SVG files.
Is there a way to save only a select group?
Or can I save / export the contents of an individual work plan?
Thank you
Rennes,
Or can I save / export the contents of an individual work plan?
Yes, exactly.
Maybe you are looking for
-
DVD - ROM Toshiba Recovery disk does not start
Hello I'm having some problems with my Toshiba Satellite M40, and I decided to reinstall the OS with the recovery of the dvd disk, but the disk does not start.When I'm on windows, the cd/dvd driver works perfectly, and I don't think that the recovery
-
How to save the data to the new file, when you press the button
Hello. Run a program that reads data recorders seconds and displays a trace on the screen. What I want, is that when I press a button, the program will ask for a file name and begins to record data to the file, and continues to do this as long as the
-
Security Center does not recognize my third-party Antivirus
1. I installed Comodo Internet Securityin September 2010 (before that I had Avira and Norton 2009 before). Currently, my laptop had malware, which I was trying to clean, if iam do not know if it has been fully updated. 2. prior to installation of Com
-
Chicony USB 2.0 Camera disconnected?
I have Toshiba A305 and my camera has suddenly stopped working. At first, I thought that it was the driver but I updated the driver and now it says that the device is disconnected! How to plug in a built in camera? I've seen a lot of articles that sa
-
Just as the title says: I don't want to have to manage fonts on my machines for rendering. I want to just incorporate the necessary fonts in the AE project file. However, I am not able to find a way to do it.Ideas?