What are the ports need to be open?

Similar Questions

• Cisco VPN Client - what are the ports I need to open the 1841?

  Hello. As it says on the Tin really, what are the ports I need to allow my access on our 1841 list to allow the Cisco VPN client on through it?

  Ta

  UDP 500 (isakmp)

  UDP 4500 (nat - t)

  Protocol ESP 50

• What are the ports used by the Cisco VPN Client?

  Hello

  I need to open my outgoing traffic on my firewall to allow two interns (LAN) Cisco VPN Client to connect to their Internet virtual private network.

  I already opened the port 500/UDP, but they are not able to connect. If I open all outgoing ports, they can connect.

  What are the ports used by the Cisco VPN Client?

  Thank you

  You need to open:

  UDP 500

  ESP protocol

  You must also open the UDP 4500 port (if using NAT - T).

  In addition, if the clients are connecting to a VPN 3000 Concentrator series and it is configured for all other options of NAT-transparency, corresponding ports must be open. By default:

  1. If using IPSec over TCP 10000, then open TCP 10000.

  2. If using IPSec over UDP 10000, open UDP 1000.

• HP HDX X18T - 1200 CTO Premium: what are the ports on the HP HDX X18T notebook PC - 1200 CTO Premium

  What are the different ports on the HP HDX X18T-1200 CTO Premium Notebook PC ?

  USB 2.0 port and which is 3.0?

  USB 3.0 will have a blue Center tab or a "SS" logo next to it, or both.

• RH8:Webhelp: What are the parameters to use to open the topic by using the URL?

  Hello

  WebHelp pages can be opened by URL from a few additional parameters so I need to integrate my WebHelp with some third party applications and specific topic was opened instead of the cover page of WebHelp. That is, I want to open the topic that speaks of "Ice Cream" then how to design URLS that opens the topic "Ice Cream", or open the search with search results 'Ice Cream' page.

  I watched a feature of content sensitive help, but this one is not exactly what I want since I need to have a complete mapping list in RoboHelp and updating a list on application third regularly too.

  Hello

  Read the excellent article on the website of Peter: http://www.grainge.org/pages/authoring/calling_webhelp/calling_webhelp.htm

  It describes the three methods of appeal for help and how to implement.

  Note: The files needed for the sensitivity of context are mapping (.h) file and the aliases file to map the topicId to a file. You can easily create a script to generate all this information, if you do not have to do that all by hand.

  Take a bow

  Willam

  This email is personal. In our view, full disclaimer, please visit www.centric.eu/disclaimer.

• What are the port to windows remote assistance settings?

  UVerse just installed a new cable box and now my remote assistant does not work.  I called Uverse and open ports, they need the port for him to work settings.

  Hi John,.

  Please go to the Microsoft Community Forums.
   
  I suggest you to refer to the links and check if it helps:
  Help someone with a computer using the Assistance problem Windows remote
  http://Windows.Microsoft.com/en-us/Windows7/help-someone-with-a-computer-problem-using-Windows-remote-assistance
   
  Windows remote assistance: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-remote-assistance-frequently-asked-questions
   
  For additional assistance, please post the query in the link below:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
   
  Thank you.

• What are the driver need to be installed?

  How can I add windows application Daqmx on studio measure 2010 in visual studio 2010?

  I have VS2010 & MS2010 & device driver 2012.8.

  After you have installed the drivers for my visual studio 2010. I can't open windows application Daqmx?

  in fact, I don't know what drivers to use Daqmx Application Windows can be installed.

  Please help me

  Hi SAM,

  To install support for Measurement Studio, you need to install support for this, when you install the NOR-DAQmx driver.  Since it seems you have installed .NET for Measurement Studio support in the first installation, you can add this support in running the National Instruments software installation utility.

  "" "You can access it by going on Control Panel" uninstall/change programs ' National Instruments software "uninstall/change.  Once the National Instruments software dialog box appears, you must choose OR DAQmx 9.1.7 in the products tab, and then select Edit.  It will ask you to insert the driver disc to continue installation. To do this, simply insert the DVD of drivers, you have, with which you originally installed OR DAQmx.

  From there, you can choose the custom Setup and choose to install .NET Framework languages support x.x (x.x will be regardless of the version of the .NET Framework will develop you in) with Integration of measurement Studio.  This document contains screenshots of what you will see the custom Setup.  The third figure in the previous document shows what I mean by installing support for .NET in Measurement Studio.

  Please let me know if you have any other questions.

  Best regards,

• What are the ports SATA of the notebook HP Pavilion DV6, model LZ495E

  Hi all

  I used the HP Pavilion DV6-6152er, model LZ495E #ACB

  Laptop got Toshiba MK5061GSYN with Serial ATA 3.0 Gb/s hard drive

  This phone has on chipset HM65, who have SATA2 and SATA3 ports

  My question what is port (speed) that comminicated on the hard drive?

  I know that dvd writer connected to the SATA2 (3.0 Gb/s)

  I want to upgrade, install wiith SSD SATA3 (6.0 GB/s)

  Concerning

  Hello

  You can check it out yourself using the following tool:

  http://www.cpuid.com/downloads/PC-Wizard/2014.2.13-Setup.exe

  When executing the program, look under the heading "number of disk controller. It will show you the speed as indicated:

  

  Kind regards.

• What are the steps needed to get EPICS server to publish the deployment on RT cRIO

  I've been using LV for many years and has everything with a cRIO 9074 RT I am able to generate and execute/deploy the simple screw on the cRIO, but can not get the EPICS server to publish the PVs on the network.  I have spent hours studying examples and whitepapers, but can not find a good example of a server of EPICS on the cRIO deployment.  (I used successfully EPICS on computer based systems)

  Does anyone have an example step by step related to the deployment of the EPICS on a cRIO (real time)?

  It turns out that the PVs were published.  Just know how to pick them.

• What are the security risks to open port 80 on workstations?

  Hi all

  in our environment, there is an application that opens port 80 on workstations when it is installed, but it is not allowed on preimeter FW

  could you please tell what are the security risks for leaving port 80, opened on the workstations? or it is considered to be safe unless it is not allowed on the preimeter FW?

  Thank you & best regards

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• What are the default ports in the firewall of the ESX ESX Server groups

  Hi all

  Greetings to all!

  <! [endif] > <! [if gte mso 9] >

  I'm new to vmware. I have some experience in Linux. I need to work with EXES

  Firewall. Can someone help me with firewall ESX.

  Suppose for example, that if I need to block some ports or open a

  port to a particular network. (Clamping server)

  And I would like to know what groups of ports in ESX

  Server and what are the default ports

  ESX Server available groups

  While the physical switches have ports to which you can connect, virtual switches have groups of ports. The types of Group 3 port are machine virtual port group, port console and vmkernel service groups

  Méhul

  PS: If you find answers correct or useful, please consider giving points!

• What are the different ports used by BTA?

  Having recently had 'fun' to getting a load agent working in our secure local network, I was wondering if someone could clarify what are the different ports to/from?
  
  I am aware of the following:
  
  9001 actually mentioned when you configure a load agent
  1099 mentioned when you configure a data collector
  1098 -? necessary for the agent to load (I would hazard a guess to this also being the collector of linked data)
  4444 -? necessary for the agent to load
  7071 -? necessary for the agent to load
  
  I had also the following ports was told by looking at similar issues (but they didn't need opening in my recent exercise):
  
  7073
  8083
  8088
  
  I also suggested that information added to the knowledge base article (Doc - ID: 787226.1) because they may need to open on the firewall.

  Ian

  Oracle.port.RMI = 4444
  Oracle.port.http = 8088
  Oracle.port.empstart = 9001
  Oracle.port.uil2 = 7071
  oracle.port.dataCollector = 7073
  Oracle.port.WebService = 8083
  Oracle.port.JNDI.rmi = 1098
  Oracle.port.JNDI = 1099
  Oracle.port.HTTPS = 8433

  You can change the ports

  - \EmpAppServer\server\default\conf\oracle.propertie

  The following ports are used between load tests of Oracle for Server Web Applications and the Machine of the Agent itself:

  * 9001 (the agent communication port)
  * 1099 (Datacollector Comunication Port)
  * 8088 (for running scripts OpenScript)

  Concerning

  Alex

• I still need a fax of legal documents. What are the options for p-1030 pavion with Windows 7?

  What are the options for p-1030 pavion with Windows 7.  I still need a fax of legal documents?

  I would like to add a modem fax boarding card.  Is this possible with windows 7 or HP?

  Linda, welcome to the forum.

  I suggest try Windows Fax and Scan (Control Panel / devices and printers / Fax) to see if it does what you need.  It allows to send and receive faxes without a fax machine.  When you click fax it will open and give you instructions on how to configure the application.

  Please let us know if this solved your problem or not.

• What are the original applications for the iPhone 6 s. I had to sync to my iPhone 3g to my new 6s in order to maintain my contacts. can someone please send screenshots of an iPhone running 6s with applications shown. I need pages outside the home page.

  What are the original applications for the iPhone 6 s. I had to sync to my iPhone 3g to my new 6s in order to maintain my contacts. Unfortunately, I lost a lot of these new applications. can someone please send screenshots of an iPhone running 6s with applications shown. I need pages other than the home page. Thank you!

  'Stock' apps are part of the installation of iOS and cannot be removed, so there is nothing to verify or prove.

  When you move to a new phone, just need restoring your old backup phone and compatible applications will be synchronized to the new.

• I need to buy a newer opportunity apple computer so I can run Firefox 8. What are the minimum requirements to ron Firefox 8.

  I need to buy a newer computer apple opportunity to launch Firefox 8, what are the min system requirements.?

  Here are the system requirements for Firefox 8.