What can I do if Windows does not start and system repair will not work

Similar Questions

• Photos may not be printed as a service that needs Windows does not work

  One morning last week when we turned on the conputer lots of things had changed.  I finally got my page online straightened out, but I could not print photos that were stored in the computer.  When I tried I got the message "Photos cannot be printed because no printer is installed or a service that needs Windows does not work.  And I wasn't able to print with my camera card inserted in the printer. I was able to print the text so that the printer is of course.  Can you help me?  I must add thaat I was able to print photos using the map to a pharmacy machine then the card is OK.

  Wendell Bard

  Hello

  1. What is the brand and model of the printer?
  2. you remember to make changes on the computer before the show?

  Method 1:
  You can perform troubleshooting of the printer and check:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  
  Method 2:
  If the problem persists, you can perform a restore of the system to the point when it was working fine and check:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  You can also check out the link:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  For more information, please see the link below:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• Defender of the window does not work.

  I recently had the Vista antispyware 2012 the virus.  I was able to get rid of it, but now the Defender window does not work.  When I click on the icon I get a pop up msg: "failed to initialize: 0 x 80070006.» The handle is invalid. "How to operate?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/why-does-my-Windows-Defender-not-work/a9c81020-cf8d-4149-8B4B-bc059ecf500a

  But you should also read this:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

  Norton, AVG and McAfee, MSE will disable Windows Defender for dreaming of potential conflicts with their respective programs.

  I hope this helps...

• I can t install apps, its does not work

  I just bought it and now for every apps it says installation failed try again but nothing works, anyone know why?

  Thank you very much it works finally I don t know why, but it of working

  2016-01-26 18:07 GMT + 01:00 kglad [email protected]>:

  I can t install apps, its does not work created by kglad

  https://forums.Adobe.com/people/kglad> in * Cloud Creative download &

  Installation *-see complete discussion

  https://forums.Adobe.com/message/8430429#8430429>

• Video preview of AE cs6 window does not work.

  If the after effects cs6 preview window does not work. It shows just the black screen. I need quick help.

  The example PIC: http://gyazo.com/d1219b0b95d7b2bd59e0980506db7c95

  Why am I not surprised? Yes, the effin ' mess they made with the OpenGL drawing. To update your graphics driver and configure it properly. If it is supported, it should work, otherwise the program will / should turn off automatically. Trash the prefs after the pilot started day so AE scans again.

  Mylenium

• Satellite Pro C850-1EQ - 8 tiles Windows does not work

  Hello

  I'm desperate for help try to solve this problem with my laptop. When I got my laptop (at Christmas) the majority of the tiles on the home screen windows 8 worked, however after a week or two they have gradually stopped working, which is very frustrating.

  When I click on a tile, it opens on the screen but the wheel continues to turn and nothing loads. I spoke to Microsoft online, however, they said that the problem with Toshiba as the laptop was purchased with Windows 8 already integrated.

  Suggestions, they did involving anti-virus and updates did not work.
  The most frustrating part is the Windows tile store does not work so I can't try to updates or new downloads to see if they will not solve the problem.

  Of course, I can use my laptop without the tiles, but I'm upset that I paid extra for Windows 8 and chooses the best part of it not working!

  Any advice on what to do next would be great, thanks in advance.

  Guess what? Try to restore the system Windows 8 back to the factory settings.
  Here you will find documentation how to do this:

  [Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]

  I recommend using the option * reset your PC *.

  + This option "Reset your PC" is useful when a PC is changed hands, or when you want to get a completely fresh start on a PC, without previous files of the selected configuration. +
  + The delete all, then reinstall Windows option permanently removes your personal files and the PC applications and returns 8 Windows to its original state. That the State of origin is a clean install of Windows 8, nor the default configuration of OEM factory, depending on the medium used for the operation. +

• Research of a window does not work (but only when the folder is indexed).

  As the title suggests, I can look perfectly fine and find EVERYTHING in a folder with even the most detailed search operators, but only if I index the file. I had the same problem with Windows 7 as well and I don't know how to get around this problem. I think it may have something to do with the case in question is on an external drive but I still don't understand why this is the case. Indexing is supposed to make the search faster for a specific folder, but no matter what I do, Indexing always brings Vista only returning "no matches" for each search query. If I was of the same type in one letter, he found nothing.

  Assistance would be greatly appreciated.

  Hello

  1 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Those are the kind of prerequisites.

  ==================================

  2. these should help to solve the issue and some tips to help.

  Windows Search does not work or research are slower
  http://support.Microsoft.com/GP/windows_search

  Troubleshooting Windows Vista search & indexing errors
  http://www.WinVistaClub.com/T24.html

  Reconstruction of the Index in Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/rebuilding-the-search-index-in-Windows-Vista/
  How to enable or disable the search Index in Vista
  http://www.Vistax64.com/tutorials/69564-index-enable-disable.html
  Improve Windows searches using the index: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  ================================

  Tips for finding files
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-files

  How to use advanced search in Vista Options
  http://www.Vistax64.com/tutorials/75451-advanced-search.html

  How to restore the page button on the Start Menu after installing Vista SP1
  http://www.Vistax64.com/tutorials/145787-Search-start-menu-button-restore-after-SP1.html

  How to restore the context Menu item search after installing Vista SP1
  http://www.Vistax64.com/tutorials/134065-search-context-menu-item-restore-after-Vista-SP1.html

  How to create a shortcut on the desktop search in Vista
  http://www.Vistax64.com/tutorials/126499-search-desktop-shortcut.html

  ----------------------------------------------------------

  Win Key F opens advanced search

  Searching in Windows Vista, part 1
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-1-secrets-of-the-search-box

  Part 2
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-2-Start-menu-and-control-panel-search-tips

  Part 3
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-3-using-advanced-search-for-those-hard-to-find-files

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I said that I have to install Chrome to place an order at Walmart. What should the Chrome that Firefox does not work?

  I have placed several orders of Wal-Mart before today using Firefox without any problems. But today, nothing but problems. I tried for more than 4 hours, get this order to cross. I told cat line of Walmart and told me that I have to install Chrome to place an order. They don't answer when I asked if Walmart belonging to Chrome.

  I deleted the cookies and cache and restarted but none of this has worked. While Chrome has that Firefox does not work? I tried Chrome before and he hated and had a devil of a time he get off my computer. I don't want to go there again.

  I have attached a copy of the message that I get seems to indicate that it is a problem within Wal-Mart, but I said that it was with my browser.

  I have a laptop Toshiba Satellite running Windows 7 Ultimate 64 bit and using Firefox 40.0.3.

  Any suggestions would be greatly appreciated. Thank you.

  Thanks for your reply. I just figured out the problem.

  All started when I tried to pay my order at 13:00 this afternoon. I am persistent and don't give up easily. Five hours later, I found an error in their programming, which allowed me to add an item to my shopping cart that was a purchase in store only. But then when I went to pay for it, he became confused and wouldn't let me order but didn't tell me why.

  I solved by moving all items in the basket to saved for later and then add one at a time, trying to get to the car after each addition. It took a while because there are 20 items. He had the same problem when I added the item in the store to the cart and tried to pay for it. So I deleted and purchased on Ebay.

  Now I know probably as much if not more than any of their populations of the Chat line that can only be read on a book script.

  It's a relief that I don't have to use Chrome. I really like Firefox and would not change.

• Toshiba Satellite C55-C1K1 - 10 Windows does not work

  Bought one for my mother and it has been a nightmare. The first was a problem with the keyboard that caused it typing random characters on the screen.

  The replacement worked very well for about two months, now the touchpad has stopped working. I use the touchpad in the BIOS, so I know that is not a hardware failure. Tried all the drivers available, including the MOMENTUM (which shows a CRC problem) on the Toshiba site and nothing would work. Tried reinstall of keeping my files didn't work. Then finally took an image of the disk and installed a full Windows 10 and it STILL does not work.

  So what am I, I wanted to now install Windows 8 on it and see which will work. Why Toshiba push 10 windows on people when they did not ensure that the software and hardware are compatible.

  UPDATE.

  I installed Windows 8 on the laptop, and STILL the touchpad does not work. Finally I found a thread on another site, that said that for another model of C55 - A (similar) of Toshiba, the solution has been updated to BIOS. So I downloaded the latest BIOS update and installed. Restarted after the update, and the touchpad started working again. Restarted a few times and it still worked.

  Finally imaged original return 10 Windows operating system on the hard drive, and the touchpad and F5 (activeent/desactiveent) both work now. Toshiba needs to have a note sent with these laptops or to have a reminder. Two days lost on this nonsense.

• Windows does not work

  Hello

  Help, please!  my laptop wouldn't start this volume shows that it's from a load but it does not open after that and f11 does not work

  I have a g6-2340ee pavilion

  Running 64-bit windows 8

  Help, please

  Hi abanoubgad,

  According to the flashing code which refers to the means, you have a BIOS corruption. You can try to restore the BIOS to see if that solves the problem. If this does not work then if you are in warranty, I suggest you call HP Total Care at 1-800-474-6836 in North America or visit this link if you are outside of North America.

  If you are out of warranty, you can try to remove and replace the RTC or CMOS of laptop computer battery. If you are on a call of the HP Total Care guarantee that opening your laptop computer will void your warranty. Page 78 of Maintenance and Service of Guide will show you how to do this.

  Thank you

• ID of the window does not work

  I checked with Xbox my Windows ID is * address email is removed from the privacy *, but when I type it in the live window it does not work.  It references # is 1154236065.  I can't have my xbox live to work, because the windows id does not work on your end.  You can help.

  Hello PaigeIsaac,

  I suggest that refer you the link that will give you information about this below:

  http://support.Xbox.com/en-us/pages/Xbox-Live/how-to/Xbox-Live-account-management/manage-Live-ID.aspx

  http://support.Xbox.com/en-us/pages/Xbox-Live/troubleshoot/sign-in.aspx

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Updates to Windows does not work

  Windows Update does not work. I used the troubleshooting of windows update. So-called three problems have been resolved, but has not been set. one not fixed is, windows update error code 0 x 80070057 (2016-o4-19-T-07_25_28A. How can I fix it?

  Home premium HP 635 laptop Windows 7

  Switch your windows update setting to never check the updates temporarily

  Restart the machine
  Then you download this from your download folder run from there.
  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not
  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check
  updates before running from the downloads folder.

  Once it installs and restarts
  You can reset your updates affecting everything you had before default =...
  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,
  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You need to scroll down to the poster of Joel SC is the last answer on this thread.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• "the key to upgrade to an edition of windows does not work with Windows Anytime Upgrade" was the message received when you use the code comes to purchase Microsoft online. Any suggestions? »

  Upgrade Windows 7 Home Premium to professional.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Help! Motion presets window does not work.

  I tried to use the presets of movement for a project feature, but motion presets window does not display files or options. I see that the following: motion presets tab, the other options in the upper right corner, "Preview not available", save it the selection as a preset, the new folder button button, trash and the grey button apply. Someone knows how to fix this? The file is intact and in the right place.

  Also, make sure you that you resize the Panel large enough vertically when you try this - I think that if the Panel is too short, you can not see this black double-sided arrow at all (the preview area is too large).