What can I do to correct "RUNDLL32. EXE' problem?
CANNOT ACCESS THE CONTROL PANEL. RUNDLL32. EXE' POPPING UP. WHAT SHOULD I DO?
Hey Sissy,
1 have you made changes to your computer recently?
2. What is the operating system installed on your computer?
I suggest you to follow the steps from the link and check if it helps.
Method 1: Run check file system (CFS) analyses and checks to see if it helps.
Note: SFC system gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker. If the cache folder is damaged or unusable, you can use the sfc/scannow, sfc /scanonceor sfc /scanboot orders to repair its contents.
Method 2: Scan your computer anti-virus using the Microsoft Safety Scanner, then check if it helps.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 3: If the problem persists, perform a system restore and check if that helps.
System Restore For Windows 7
System Restore for Windows Vista
Tags: Windows
Similar Questions
-
I have just to complete installation of updates on my compaq presario sr2037x... and when it restarted it goes to the ' start windows normally, safe mode, safe mode w/network, w/command prompt safemode and the last known good configuration "screen... I tried to start windows normally, then the last known good configuration and not matter what I do it looks like its about to start up, then a brief blue screen flashes then I finish immediately at the start screen mode to choose.
BSoD on my xp. Thank you microsoft. No problem until your update. You are the people going to do about it? Does not load in any case, in any case.
STOP: 0X000000E3 (0X80558BE0, 0X81B4B020, 0X00000000, 0X00000002)
Found this by searching. don't know if it will work again. This update might be the problem. KB971486
Link here. http://www.stateofthetech.com/?p=117
Read on to find some easier ways to fix. Now, I must go and get a record of Microsofts problem!
-
can't c:\windows\system32\rundll32.exe to run on my windows xp
Original title: windows xp
can't c:\windows\system32\rundll32.exe to run on my windows xp
Hi carolreynolds,
· When exactly do you get this error message?
· What is the full error message?
· You did changes to the computer before the show?
· Are you able to boot to the desktop?
Answer with the information required to help more.
You can also see the article:
Suggestions for a question on the help forums
http://support.Microsoft.com/kb/555375
For reference:
Cannot find the Rundll32.exe file when you open Control Panel
-
What can I do to correct premierepro CS5.5 after win 7 to win 10 update? It does not start.
An idea that MAY work to install or run some programs in Windows old 10
-read what to do in https://forums.adobe.com/thread/1945740
-
I have the Windows cannot find C:\WINDOWS\system32\rundll32.exe problem and I do not have my disk
Hello
- When you receive this error message?
- What were the changes made before the issue started?
Try the SFC scan on the computer.
SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.
Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.
Reference:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
-
I can't open internet explore or firefox without being invited to choose from a list of programs to run the .exe file from. When I click on internet explore I wonder if I want to run this file or save it, option whatever I choose it does not work.
In addition, I'm not able to click and open all the shortcut icons on my desktop. I get the c:\windows\system32\rundll32.exe application not found error.
Hello
- Could you give us the exact error message?
This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.
To resolve this issue, follow these steps:
1 put the CD ROM Windows XP disc in the CD-ROM drive.
2. click on start and then click Run.
3. type expand X: \i386\rundll32.ex_ c:\windows\system32\rundll32.exe in the Open box, where X is the letter of your CD drive.
4 restart the computer.For more information, please see the KB article.
I hope this helps.
-
version 5 loaded on windows 7. all went well for a while. one day, using, normal screen ratio doubled in width; that is half of the page disappears off the screen to the right (on a widescreen). When applied full-screen mode, the ratio is very good. It only happens in normal mode, which is the generally preferred option. I can't determine all means within the program to resize the normal screen. nothing else is affected, only mozilla firefox in normal mode. not when the program is opened from keyboard page is correct for a moment, and then increases the width with 1/2 page dissappearing.
This problem may be caused by the extension of the toolbar of Babylon 1.1.8
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
What can I do to correct the issure
can't get out of safe mode, what is the problem?
Your message is in the forum for people needing help with the anti-malware program from Microsoft Security Essentials (MSE).
Thinking about ask you for help in the Windows Forum: http://answers.microsoft.com/en-us
You might read the following link and see if this helps:
http://www.LIUtilities.com/how-to/get-a-computer-out-of-safe-mode/
-
What can I do to correct an error of ipconfig?
I had internet connectivity problems and tried to solve the problem. I tried to run ipconfig from the command prompt and get the following error message:
An internal error has occurred. A device attached to the system does not work.
Additional information: unknown media status code.I was wondering what I can do to solve this problem. Thank you.
Follow the steps described in the article in the Microsoft Knowledge Base How to reset the Internet Protocol (TCP/IP) .
-
I tried to use the "Search" function to locate a specific file. The computer froze... not allow me to cancel when I realized that it wasn't working. The only way I could get the closing of the window had to shut down the computer.
Hi DyleAcker,-Search function work is no problem earlier?Run the troubleshooter from the link given below and if it helps to fix the problem: -
Help, please
Hi André,.
Visit this forum: http://adobe.ly/1MOi31z
Thank you
Kevin -
What can I do to fix the error problem 205
Help!
Help creating cloud / cloud creative applications download error
http://helpx.Adobe.com/creative-cloud/KB/error-downloading-CC-apps.html
-
Rundll32.exe missing, unable to reinstall open rundll32.exe or .exe files
Then I looked around and discovered I had a virus, XP Security, erased rundll32.exe when it was faded. Now, I found another copy on my computer to ISO recovery that accompanies it (thank you, MSI), but it is useless, because I can't OPEN. EXE FILES. I had internet explore to open internet Explorer by selecting in the menu open with that appears whenever I open a .exe file, and that worked for a few other programs (World of Warcraft, as well, mainly to test).
So, what should I do to open Rundll32.exe when my computer won't let me choose Rundll32.exe as a program to open Rundll32.exe with. I select it in the open with menu by means of travel, and it does not appear in the list of programs that I can use, such as Internet Explorer and wow.
I wanted to talk to someone on the phone for 5 minutes to understand this point, but that costs 20% of this cost my computer ($50, im on a netbook). Come on, $ 50? really, microsoft?
Thank you for your response. Here's my problem. I'm on a laptop at the moment. My problem is with my desktop windows xp home edition. I can't access a Web site or make it appear an address bar imput your link. Whenever I click on internet explore or itunes or whatever it is that must be open to the top, I get the 'open with' box and it says: "choose the program you want to use to open this file. I tried to remove the rundll32.exe and go back in the folder.
When I go to the c\windows\system32\rundll32.exe folder and remove the file, I go back to the results of the research, and he returned in the results of research after a few seconds.
Thanks again.
The goal is to not do not delete the rundll32 permanently, but replace it with a replacement valid. If your MAP replaces the file then it is useless to continue to delete.
That said, the best way to solve this problem is to use a flash (USB drive) drive or other removable media to download and run the file on the link I gave you. However, if you do not have access to removable media, you can try to manually reassociate the executables.
CTRL-ALT-DEL and open Task Manager. Once there, click file, and then hold down the CTRL key and click New task (run). This will open a command prompt window. On the command line type assoc.exe = exefile > press ENTER. You should receive a prompt action succeeded.
Looks like your shortcuts can have been so separated. On the command line type assoc.lnk = lnkfile > press ENTER.
Click on the link below, download, update and perform a full scan with Malwarebytes.
-
missing window\system32\rundll32.exe
missing window\system32\rundll32.exe
I've tried EVERYTHING! I can't find this file on my computer. I tried to download from sites. I can't open my control panel to remove programs or any other application in the Panel also. I'm at my last nerve... next step is start my pc in the front yard and run over with the mower. SOMEONE HELP ME. I'm drowned in this elusive FILE! SOS!
Hello
What is missing is the process rundll32.exe is trying to run and not the rundll32.exe himself.
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Startup Type
(Registry/Startup folder), Command - Line String, the product name, file Version, company name,.
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
After you install an update, which forced me to restart my laptop, I had to do a restore point, because it stops while windows is loading files of the update, which led me to a restoration of the system, which has messed up a large number of windows registry keys install leaving me unable to open the following software:
- Skype
- Avira (but not the antivirus) Launcher
- Java
I can not install or uninstall these programs, either because I need to an .msi file that does not match the latest version of these programs, the program does not appear in the uninstall Manager or just installer does not at all, so what can I do to correct these programs and be able to install their return
The just Java installer does not appear when I double click on the .exe, no matter if it is the x 64 or 32 bits, and I can't uninstall it because it does not appear in the uninstall Manager.
Avira Launcher Installer, ask me for a .msi to remove the last version, but I can't, if the installation fails, also the program does not appear in the uninstall Manager.
The Skype installer just cannot be updated, and I uninstalled it with a 3rd party uninstaller, but now it's just throw a critical failure when starting to install
My main question is, how can I solve these installers, should I format this laptop and do a clean install of windows?
Hello
Please contact Microsoft Community.
After the description of the problem, I understand that you are not able to install programs after system restore.
In this case first I'd say allowing you to run the cities in trouble it automatically repair the issues that block the installation program or delete because of corrupted registry keys.
https://support.Microsoft.com/en-us/mats/program_install_and_uninstall?WA=wsignin1.0
After that it fixes if you have any third party anti virus try to disable it from your computer and then try to install these programs.
WARNING:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Try these steps and ley, we know the results.
I hope this helps.
Kind regards
Anusha
Maybe you are looking for
-
You need to enable Java script. When I look in the Options menu of the box is checked which corresponds to activate Java.However I can't start Webex as a dialog box opens that says that Java script is not enabled in the browser. How can I fix it? Tha
-
Upgrade the HDD on the Satellite U200
3 months ago I bought a Toshiba SATELLITE PRO U200 Jarir Bookstore in Saudi Arabia and I now want to move the HDD of 80 GB to 160 GB.However, I note that 1.46 GB the drive hard EISA is partitioned and is not assigned a drive letter. I guess that's th
-
HP Pavilion g6-1201tx Notebook: I need my windows 7 Home Basic recovery copy
I lost my drive recovery House pre installed base of windows 7 for my product mentioned above, I need my product software Home Basic windows 7 please help me.
-
Windows Update for IE changed my home page and gave me three commercials
How am I suppose to trust Windows Update for important updates in the update important that I just installed changed my home page in Internet Explorer and gave me three pages of ADVERTISING instead. What kind of scam unsolicited is?
-
Hello I have a laptop Dv6t PC. I've had this laptop less than four months ago. There is no other issue with this computer. Two weeks or so, I closed my computer, and he did some update. The next day, I turned on my computer and I tried to listen to m