What channel DAQmx property corresponds to "name" entry "DAQmx create Channel.vi?

Hello people,

I am changing a program, I have inherited so that it uses DAQmx virtual tasks rather than have the task and the channels created by programming of in the code.

In the existing code, the entry 'name' on the 'DAQmx create Channel.vi' is wired with a value.  When you use a virtual task DAQmx, I do not use the 'DAQmx create Channel.vi', but I still want to set the values of the "name" in the code with the help of a property DAQmx node.  However, I can't find a property called "name".  Such a property exists with a different name?

Best regards

Chris


Tags: NI Hardware

Similar Questions

  • Error-200431 occurred at .vi DAQmx Create Channel (I-acceleration-accelerometer)

    Hello

    I tried to use DAQmx Create Channel to accelerometer and yet it responds with error (see below). When I use max OR to measure the accelerometer (I-acceleration-accelerometer), there is no error, and I see that acceloremeter works.

    OR PXI-1042 and I use OR-4462 card to measure vibration vith acceloremeter.

    Error-200431 occurred at DAQmx Virtual Channel Create

    Possible reasons:

    Physical channel selected does not support the type of measure required by the virtual channel you create.

    Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure.

    Property: I. MeasType
    Requested value:
    You can select: sound pressure, voltage: Microphone, accelerometer, Position: Eddy Current proximity probe, Force sensor: IEPE, speed sensor: IEPE

    Task name: _unnamedTask<104>

    Hi serdaryilmaz,

    I'm not sure why the accelerometer mode does not work, but it works very well in normal mode - it maybe has to do with the accelerometer, you?  Whatever it is, if it works with the voltage mode, I am happy that we found a way to make it work.  Is this an acceptable work around you?

  • DAQmx create virtual channel (VI) error-229771 reports

    Hello

    When in a project that I am working to get error-229771 code whenever I try to run 'DAQmx create Virtual Channel (VI)' this does not happen when I create a vi not in a project.  The problem is that this project is very large and it if poster impossible to recreate. It's several hundred vi. Y at - it something that I missed in the forums and support that could explain this. I created the VI below in the project and outside the project. In the project, the error occurs outside the project, it runs without any problems.

    Message:

    229771 error occurred at .vi:1780003 DAQmx create channel (I-voltage-Basic)

    Possible reasons:

    Internal software error has occurred in the MIG software. Please contact the support of National Instruments.

    Task name: _unnamedTask

    Any help would be appreciated.  Thank you, Matt.

    LabVIEW version: 15.052(32bit)

    OR Max Version: 15.0.f0

    NEITHER DAQmx Verson: 15

    OS: windows 7 service pack 1

    PC: Intel Core i7-2600, 8 GB of ram

    Data Aquistion: NEITHER DAQ USB-6289 calibrated June 2015

    This code snippet returns the name of the first channel of analog input on the device first, and then tries to create a task for her. The bed of the canal, then close the task.

    Error message

    Hi Matthew,

    Thank you for following up after you fix your problem.  I'm glad to hear that you do not encounter this problem more.

    Here is an article that lists the reasons for this error (although unfortunately, I cannot pin down which is the exact cause in this case).

    http://digital.NI.com/public.nsf/allkb/03123D0E8A36C48E862577A4005B6BAA

    NOTE: This article specifies that the error occurs at startup task VI DAQmx.  You do not use the start task VI, so the task starts automatically in the DAQmx Read function.  The error will occur instead in the DAQmx virtual channel create, that you encounter in your error.

    I hope this gives you an idea about what could have gone wrong, and I'm sorry he is no more details.

    Good programming!

  • Error-200431, DAQmx create Channel .vi (I-voltage-Custom with excitement)

    Where is past ".vi DAQmx Create Channel (I-voltage-Custom with excitement)?

    I tried to use this VI of force measurement with an NI PXI-4472. He responds with the 200431 error... You asked: more: voltage: Custom with excitement, you can select: sound pressure, voltage: microphone,...

    It seems to me to be an internal error of the VI's Version of LabView 8.6.1

    Hi Suse,

    Thanks for your reply.

    It's the right device but the bad VI.

    PXI-4472 is an excellent camera for the dynamic force measurement using Quartz sensors. I was intending to use the .vi (I-voltage-custom with excitement) to configure entry and IEPE excitement, but I got the error code. I have now managed by using the pure (I-voltage) .vi entry configuration and IEPE using the DAQmx channel property node.

    However, I tried the .vi (I-voltage-Custom with excitement) with appropriate PXI-4220 simulated device, no error.

    Concerning

    T.Knox

  • DAQmx - create channels to channel-not found

    Hello

    I'm new to labview. So maybe my question is simple...

    I want to generate a signal. That's why I use the DAQmx-create channel.vi. I have, I've created a control to selected the channel, where the signal is generated. But no channels are found.

    I use 5412 PXI and my camera is visible in MAX. So I don't know what the problem is. Can someone help me?

    Thank you

    Ratta

    The 5412 is an arbitrary signal generator. It does not use DAQmx. It uses NEITHER-FGEN.

  • Found a lot of "No Name" entries in Contacts - How to remove?

    iOS 10.0.1 on an iPhone 6 more.

    I just discovered that in my contact list on my iPhone, I have 20 + entries 'No Name'.  they appear at the bottom of the list where I do not usually watch.

    These do not appear on my contact list on my Mac Mini, which is supposed to be synch'ed via iCloud.

    How can I get rid of all the "No Name" entries without deleting them one at a time?

    Thank you.

    Open the contact, click on edit, scroll down and click on Delete Contact.

  • Possible bug: DAQmx create channel w/o specified in task

    The VI DAQmx 'DAQmx create channel (I-voltage-Basic) .vi' requires no task should be connected, and claims his detailed help "" task in specifies the task to add virtual channels, this VI creates. "." If you do not specify a task, NOR-DAQmx creates a task for you and adds the virtual channels that this VI creates to this task. »

    My recent experience, I think that there is a problem with this feature. If no job is specified, sometimes this VI will create a new task without problems, but other times it will overwrite an existing task, causing errors later when you try to reference the crushed tasks.

    In my code, I have 7 tasks, two digital (DIO), an analog to (HAVE) and four analog out (AO). One of the AO and the tasks of the AI does not use a task VI before the channel VI create. I recently added this AO task without creating a new task manually, based on the reproduction of legacy code for the channel of AI that also not create a new task. With two spots missing the task of creating VI, I found it fairly common (20% of the tracks) a further task would be crushed, causing errors when the task has been used, either be the wrong type IO, a wrong number of channels, etc. I think I saw this error until I added the second task without creating a task, but it's so rare that he didn't pay much mind, and I would just restart my VI. Now that was occurring more often, I've been tracking it. Simply by adding 'DAQmx create Task.vi' before calling Create Channel and the new task of wiring in the task, the problem seems fixed.

    It is easy to add to create a task to avoid this problem, but it seems to me that the detailed help for Create Channel indicates that it is an unnecessary step. Thank you.

    Hi MDI - AJT.

    This looks like a problem with the code you posted, by suggestion of Norbert. When you create the task handles, you should do this only at the beginning of your code outside the loop, otherwise you will create errors that you overwrite memory locations at each iteration. If you move your virtual channel calls create outside of your loops, and does not call the handle of the task to be authorized beforehand (and implicitly create the task rather than explicitly), then this behavior must stop.

    I recommend to try this with a single line, and not 7 DAQmx calls and follow the DAQmx architecture as seen in the examples under 'Help' "'find examples' and see if this behavior persists. Later architecture, I was not able to re-create this behavior.

    BeenCoughin

  • What is the value of a registry entry "PromptRunasInstalNetPath" Windows for?

    What is the value of a registry entry "PromptRunasInstalNetPath" Windows for?

    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies]

    "PromptRunasInstalNetPath" = DWORD: 00000001; Guest ' run as ' install Net way -?

    It is not yet in the "WindowsServer2008R2andWindows7GroupPolicySettings.xlsx" Microsoft Excel spreadsheet Data-Base; so that is it for exactly?

    Ditto for the following RegEntries 3:

    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Network]

    "NoWorkgroupContents" = DWORD: 00000000. No content of working group -?

    "NoFileSharing" = DWORD: 00000001; No file - sharing?

    "NoPrintSharing" = DWORD: 00000001; No print sharing -?

    JPD

    Hi JPD.

    Thank you for visiting the Community Forums of Microsoft.

    We don't have enough resources to provide a good explanation for this query. It is better suited for the professionals on the TechNet Forums. So, please post your question on the Forums Pro TechNet Windows 8 IT from this link:

    http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

    Hope this information is useful.

  • What should I enter for "User Name" when you install the first 12 items on a Windows 7 computer?

    What should I enter for "User Name" when you install the first 12 items on a Windows 7 computer?

    Thank you

    TS

    Kglad

    I used the default value presented to me (computer username) and installed fine.

    Thanks for your comments.

    Concerning

    TS

  • What is that &amp; quot; Component specific name style &amp; quot;?

    Hi, I am using the CSS Design mode now.
    What is "specific component with style name"?

    I don't know how to use it.

    In "New Style" button "Convert to CSS" options (Flex properties panel) or dialog 'New Style' button 'New Style' (CSS Design view), I chose the "Specific component with style name" selector and set the name "myLabel."

    It's a code CSS as 'Label.myLabel ()' (point selector class selector Type) and a code such as < styleName = "myLabel" mx:Label > MXML (only the class selector?).

    It stands not class selector.
    And in MXML design mode, it is not shown on style ComboBox Menu in the Flex Properties Panel.

    How do I use?

    The "specific component with style name" acts as an allusion to the CSS Design view and is used to document the purpose of the style. However, Flex itself ignores the part component with the name name.

    So, if you have Label.myLabel {} in a css file and open the file in CSS Design mode, you can see a preview of this style with a label as the example of component. If you have just myLabel {}, CSS Design View will not know what to use as an example of component, so you must select the sample in the drop-down list at the top of the CSS Design mode area.

    In the source MXML code, Flex considers Label.myLabel and myLabel being the same thing. This is a limitation of Flex and MXML compiler. He ignores all characters before the dot in the name of style.

    Thus, the syntax of Label.myLabel is only useful in Flex Builder CSS Design View. He avoids you having to select the label as the example of component. We also consider that it is advisable, because it makes clear the name style is intended to be used with a label and no other types of components.

    -Greg Dow
    -Adobe Flex Builder Team

  • How to use DAQmx create linear scale

    Hello. I have an output of an amplifier which is 10 mV/V, which is read by a USB-6002. This amplifier voltage range is 0 to 200 volts. Have tested the DAQmx create scale Vi, I don't understand how it works. Looked at the other posts here for answers, I still haven't understood how it works. As a first step, it says that it uses the y = mx + b equation for it. I don't know what the slope refers to except if it is the angle of the line. If someone would have an example that explains how it works, it would be great. I also tried to look at an example but could not find one. Thank you

    Here is an explanation "improvised" y = mx + b.  If you think of 'x' as the input and 'y' as output, then you can consider "m" as the gain, and "b" corresponds to the offset, the output that you can read with zero entry.

    If you think of this equation from an amplifier, many are designed to have zero output when there is no entry.  In other words, b = 0.  If you have a gain of 10 mV/V (which I guess means that a 1V input would give an output 10mV, then m, usually called "the slope" (which is the slope of the curve of output), serait.010/1 = 0.01.)

    Note you describe the range of the amplifier as 0-200V, so the output will be 0 - 2V, well inside the ±10V USB-6002.

    Bob Schor

  • Error 200077 (frequency) and 200452 (task control loop) error occurred DAQmx create calendar Source.vi

    Hello

    I'm trying to control the timing of a timed loop. So far, I have tried several approaches via the software and which worked very well except the time loop in some missed cases 1-2 Ms I want to make sure the timing is right. I tried to provide an external clock through the acquisition of data I. The system I use is NI USB-6212. It has two counters and DIO and AIO, but I keep getting errors. I tried two different approaches. One was to use directly the game 'DAQmx create calendar Source.vi' in frequency mode, and when I did, I got error 200077. Then I found a post of somone saying that sometimes it is not possible and an alternative method is to use the same vi but set task of loop control mode. This one gave me Error200452. For this one you will see in my attachment the suggestion was to use an AI then the moment of him and then use this task for Creat DAQmx synchronization Source.

    I don't know what the problem is or if I need to put something differently.

    Please let me know if you can help me with this.

    I'll try to continue to work on that, but if anyone of you a suggestion I'll be very happy to consider the issue.

    Thank you in advance,

    Best, Massimo.

    Massimo,

    In my view, the errors that you see are the result of your hardware USB-6212 is supporting the functionality of the task control loop.  I have a M Series PCI card that is capable of operating both of your screws attached without problem (although they still +/-1ms variation on occaision).  When I try to use a USB-6212 simulation, I get the same error codes that you do.  Unfortunately, it's just a case of a lack of equipment.

    Kind regards

  • "Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

    "Can not open AsIO.sys (2)" I get this message when I log in after a reboot.  I have search for the file, but can't find it with the research or the command prompt.  What do do in this file, and can be created and put into the appropriate folder?

    Hi Jack,

    This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.

    André
    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • error-229771 DAQmx create channel (AO-tension-Basic) .vi:3 &lt; append &gt; &lt; B &gt; task name: _unnamedTask &lt; /B &gt; &lt; 0 &gt;

    Hello!

    I have a PCIe-6259 and BNC-2110, and I got this error. It worked until this summer, but not now...

    THX,

    Gaël.

    I restart or config in the work of MAX and it's now.

  • If I replace the control with another why DAQmx create channel once complain a false claim?

    I tried to replace the frequency by another control in the example found here complete PWM:

    http://www.NI.com/white-paper/2991/en

    However, I get the following error message:

    Possible reasons:

    Requested value is not supported for this property value. The value of the property may be invalid because it is in conflict with another property.

    Property: CO. Pulse.Freq
    Required value: 0.000000
    Valid values begin with: 22.300000e - 309
    Valid values ending with: 20.0e6

    Channel name: Dev1/ctr0

    Task name: _unnamedTask<10>

    My wiring diagram looks like this:

    If I cancel my change (i.e. I have remove the frequency control knob and turn it over to the control of the example, it works perfectly.)  I get the waveform is displayed in the oscilloscope.

    My goal is to simply use a frequency and duty cycle control knob.  How can I achieve this?

    There are two things to do.

    What I think you did now changes the scale of the handle.

    You will also need to change the values that are allowed to enter. You will do on the data entry tab in the dialog button properti.

    Uncheck the 'use default', the Minimum value limits and Maximum identical to your balance.

    Value "Response to value out of range" Coerce to both Minimum and Maximum.

    I hope this helps.
    Let me know if you have more problems.

Maybe you are looking for

  • Photo sharing to Google - Google + Photos and Panoramio accounts

    I put internet accounts set up for Flickr so that I can upload Photos to Flickr using the Menu sharing. I created an internet account to Google. The only apps I have to select from on Google share is usual: Mail, Contacts, calendars, Messages, Notes.

  • Should old Mo - new video card - I do it?

    I received the new Call of Duty and that is to say that I need to update my video card. I don't want to buy a new system just to play a PC game. Well, I want, I just can't afford it, you know? I have a 4 or 5 year old HP Pavilion p6367c Desktop PC wi

  • Highlights of the match children

    I make the video a moment strong and pulling the clips from game footage we have taped. It is visible in many programs, so I know that the DVD is very good. When I record clips on my computer or pull clips directly from the DVD, it freezes transferre

  • Connect to windows professional

    bought a pc at work, but he still works username and password.  I changed it now I can't logg on at all. How can I logg on my professional windows

  • BlackBerry Smartphones M. &lt; ABALAMA &gt; JSanders... !! I need your help please... !!

    It says on your website you are a BB Geek so my hats off to you, Sir... !! I bought a Storm 9530 used on ebay. I'm Canadian and this is my first BB... I noticed that here as My No... the number of the last person who had this... Also there is anywher